Equipment Positive Displacement meter

Model ZC17-24 with mechanical register
Performance characteristics
Measured liquids Liquid hydrocarbons, industrial oils, fatty acid esters, ethanol
Static pressure max 15 bar
Inlet pressure max 8 bar
Liquid temperature min / max - 10°C / +90°C 14°F / +194°F
Working flow rate min / max 2.4 m3/h - 40 L/min – 10.5 USGPM / 24 m3/h - 400 L/min – 105 USGPM
Liquid viscosity max 20 mm²/s (MID) - 800 mm²/s - at operating conditions
Accuracy +/- 0,15% of measured value
Repeatability +/- 0,02% of measured value
Pressure drop See attached pressure drop chart
Calibration report On 3 points (2.4 m3/h, 12 m3/h, 24 m3/h)
Manifold
Connection nominal size DN 50 / 2''
Material Aluminum (EN AC-42200)
End connection style Satam flanges with welding counter flanges
Flow direction/Mounting PH2, PH1, perpendicular inlet and outlet – See attached document
External coating Acrylic-Epoxy coating RAL5010, Marine Epoxy coating RAL5010 (option)
Flowmeter body
Body material Ductile iron (EN 5.3201) with anticorrosion lining, Ni resist cast iron(EN-JL-3011) (option)
Cap/end cover material Carbon steel (EN 1.0625) with protective coating
Seal/O-ring material Viton, Nitrile (option for alcohols measurement)
External coating Acrylic-Epoxy coating RAL5010, Marine Epoxy coating (option)
Measuring chamber
Displacement element type Sliding vanes flowmeter
Cyclic volume 0,40 L - 0,10 USG
Blades / Blades connection rods Graphite / Stainless steel
Rotor Aluminum (EN AC-42200)
Bearings Stainless steel (EN 1.4301)
Swing joint Viton, Nitrile (option for alcohols), PTFE (option for low ambient temperature)
Drive train and adjuster
Drive type Mechanical transmission
Accuracy adjuster type Mechanical adjuster AB35
Pulses transmitter NA
Temperature compensation type NA
Register
Register type Mechanical register
Model VR7887, 5 digits – direct metering, differential metering (option), 6 digits (option)
Accessories Preset with valve, printer, pulses transmitter
Environmental
Ambient working temperature min / max -25°C, -40°C (option) / +55°C -13°F, -40°F (option) / +131°F
Storage temperature min / max -40°C / +80°C -40°F / +176°F
Certification
ATEX Zone 1 II 2 G
European metrology CE /MID evaluation certificate n°LNE-11052
International metrology OIMLR117-1, type compliance certificate n°LNE-24351
Standards compliance API, ASME, GOST, NATO - See note 1
Note 1: Contact us for further information about standards compliance.
   

SATAM sas www.satam.eu

Headquarters & Sales Department Manufacturing facility DS002-Rev02-07/17-Marketing Satam
 
Paris Nord 2 – Bâtiment Le Gauguin Avenue de Verdun Subject to modification without prior notice
47, allée des Impressionnistes – BP85012 – Villepinte 14700 Falaise – France
95931 Roissy CDG Cedex – France Tel : +33 (0)2 31 41 41 41
Tel : +33 (0)1 48 63 02 11 – Fax: +33 (0)1 49 38 41 01 Fax : +33 (0)2 31 40 75 61
Email : [email protected]
  
     

Equipment Positive Displacement meter

Model ZC17-24 with mechanical register
Working principle
manifold
  
 
flow inlet flow outlet
  
  body
rotor
  connection rode

  blade

volumetric segment

Flow direction and mounting

Register parallel to flanges axis Register perpendicular to flanges axis

Back inlet left outlet Back inlet right outlet

Dimensions and weight

   

Dimensions (mm) ZC17-24

A 180
B 409
C 216
B 

D 211
E 291
F 54
G 566 A 
H 253
Weight (kg) 22
   
SATAM sas www.satam.eu
Headquarters & Sales Department Manufacturing facility DS002-Rev02-07/17-Marketing Satam
 
Paris Nord 2 – Bâtiment Le Gauguin Avenue de Verdun Subject to modification without prior notice
47, allée des Impressionnistes – BP85012 – Villepinte 14700 Falaise – France
95931 Roissy CDG Cedex – France Tel : +33 (0)2 31 41 41 41
Tel : +33 (0)1 48 63 02 11 – Fax: +33 (0)1 49 38 41 01 Fax : +33 (0)2 31 40 75 61
Email : [email protected]
  
     

Equipment Positive Displacement meter

Model ZC17-24 with mechanical register
Pressure drop chart

SATAM sas www.satam.eu

Headquarters & Sales Department Manufacturing facility DS002-Rev02-07/17-Marketing Satam
 
Paris Nord 2 – Bâtiment Le Gauguin Avenue de Verdun Subject to modification without prior notice
47, allée des Impressionnistes – BP85012 – Villepinte 14700 Falaise – France
95931 Roissy CDG Cedex – France Tel : +33 (0)2 31 41 41 41
Tel : +33 (0)1 48 63 02 11 – Fax: +33 (0)1 49 38 41 01 Fax : +33 (0)2 31 40 75 61
Email : [email protected]