Scribd Logo
Upload

Welcome to Scribd!

  • 90 views

    Notifier Control Panel 2 Zone SFP 2402E

    Uploaded by

    Diego
    The document describes a 2-zone fire alarm control panel. It has two initiating device circuits, one notification appliance circuit, and features like drift compensation and maintenance alerts for smoke detectors. It provides power and controls for fire alarm devices on two zones.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Notifier Control Panel 2 Zone SFP 2402E

    Uploaded by

    Diego
    90 views2 pages
    The document describes a 2-zone fire alarm control panel. It has two initiating device circuits, one notification appliance circuit, and features like drift compensation and maintenance alerts for smoke detectors. It provides power and controls for fire alarm devices on two zones.

    Original Title

    Notifier-Control-Panel-2-zone-SFP-2402E

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a 2-zone fire alarm control panel. It has two initiating device circuits, one notification appliance circuit, and features like drift compensation and maintenance alerts for smoke detectors. It provides power and controls for fire alarm devices on two zones.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    90 views2 pages

    Notifier Control Panel 2 Zone SFP 2402E

    Uploaded by

    Diego
    The document describes a 2-zone fire alarm control panel. It has two initiating device circuits, one notification appliance circuit, and features like drift compensation and maintenance alerts for smoke detectors. It provides power and controls for fire alarm devices on two zones.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DN-6876:B2 • B-90

    SFP-2402(E)
    2-Zone Fire Alarm Control Panel

    Conventional Fire Alarm Control Panels

    General
    The Notifier SFP-2402 and SFP-2402E Fire Alarm Control Pan-
    els (FACPs) bring the latest in microprocessor technology to
    conventional fire controls. The SFP-2402 is compatible with the
    i³™ smoke detectors from System Sensor with drift compensa-
    tion, maintenance alert, and freeze warning. Automatic synchro-
    nization of audio/visual devices with three selections for
    manufacturer protocol. The Notification Appliance Circuit (NAC)
    protocol can silence audible devices while strobes continue to
    flash, using a single pair of wires.
    The SFP-2402 is compatible with conventional input devices
    such as two- and four-wire smoke detectors, pull stations, water-
    flow devices, tamper switches and other normally-open contact
    devices. Refer to the Notifier Device Compatibility Document PN
    15378 for a complete list of compatible devices.
    Note: Unless indicated otherwise, the term “SFP-2402” refers to
    both SFP-2402 and SFP-2402E models.

    Features
    • Two Style B (Class B) Initiating Device Circuits (IDCs).
    6876cov.jpg
    • One Style Y (Class B) NAC.
    • 24 VDC.
    • i³™ Technology features:
    – Drift compensation automatically adjusts detector sensitiv-
    ity and increases resistance to false alarms caused by dust
    – Temporal or Steady signal
    accumulation. – Silenceable or Nonsilenceable
    – Maintenance Alert LEDs (per zone) warn of excessive dirt • Silent or audible Walk Test operation mode commanded from
    accumulation, preventing false alarms (meets NFPA 72 the front keypad, with automatic return-to-normal after one
    requirements). hour of inactivity.
    – Detector sensitivity is automatically measured by the • Each zone may be programmed for supervisory or fire; each
    detector, which automatically adjusts its sensitivity back to zone has separate red and yellow LEDs.
    the factory settings when it becomes more sensitive due to • Disable switches provided for each zone.
    contaminants settling in the chamber. • Form-C Alarm and Trouble relays.
    – Wireless handheld sensitivity meter eliminates the need for • 3.0 amps total usable current.
    voltmeters, magnets, and a physical connection to the
    detector. The reader displays sensitivity in terms of percent • Piezo sounder for alarm, trouble, supervisory and mainte-
    per foot obscuration and provides text status indication. nance.
    – Supervisory LED (per zone) provides warning if a detector • Control buttons:
    senses temperature approaching freezing. – ACK (Acknowledge)
    – Special test protocol and LED indication allows quick test of – Alarm Silence
    all detectors without need for a ladder. – Reset
    • NAC synchronization features:
    – Walk Test
    – Synchronization of standard ANSI audible signals as
    – Zone Enable/Disable (one per zone)
    required by NFPA 72.
    • LED indicators:
    – Synchronization of ADA compliant strobes per NFPA 72.
    – Selectable for System Sensor, Wheelock, and Gentex – Fire Alarm (one per zone)
    protocols. – Supervisory (one per zone)
    – Selective Silence for manual silence of horns while – Trouble (one per zone)
    strobes continue to flash on the same NAC. – Maintenance (one per zone)
    – Alarm verification selectable for each zone. – AC Power
    – Disable switches provided per zone. – NAC Disable
    • NAC programmable for: – Zone Disable
    – Silence Inhibit – NAC Fault
    – Auto Silence – System Trouble
    – Strobe Synchronization – Power Trouble
    – Selective Silence (horn-strobe mute) – Walk Test

    DN-6876:B2 • 12/21/11 — Page 1 of 2


    – Alarm Silence AUXILIARY OUTPUT: RESETTABLE POWER — TB1
    – Earth Fault (on circuit board) • Operating voltage: nominal 24 VDC.
    – Battery Fault (on circuit board) • Maximum available current: 500 mA — appropriate for pow-
    – Charger Fault (on circuit board) ering four-wire smoke detectors (see notes).
    • Optional dress panel. • Power-limited circuitry.
    Notes: 1) Refer to the Notifier Device Compatibility Document
    PN 15378 for a complete list of compatible devices.
    Operation
    2) Total current for resettable power and one NAC must not
    Activation of a compatible smoke detector or any normally-open exceed 3.0 A for SFP-2402.
    fire alarm initiating device activates audible and visual signaling
    devices, illuminates an indicating LED, sounds the piezo CABINET DIMENSIONS
    sounder at the FACP, activates the FACP alarm relay and oper- Door: 15.342” (38.97 cm) high x 14.667” (37.28 cm) wide x
    ates an optional module used to notify a remote station or initi- 0.375” (0.95 cm) deep.
    ate an auxiliary control function.
    Backbox: 15.0” (38.10 cm) high x 14.5” (36.83 cm) wide x 3.0”
    (7.62 cm) deep.
    Specifications
    BACKBOX MOUNTING
    AC POWER — TB8
    The cabinet can be surface mounted. The door is removable
    • SFP-2402: 120 VAC, 50/60 Hz, 2.3 A. during installation by opening and lifting it off the hinges. The
    • SFP-2402E: 240 VAC, 50 Hz, 1.15 A. cabinet mounts using two key slots at the top of the backbox and
    • Wire Size: Minimum 14 AWG (2.0 mm²) with 600 V insulation. two additional 0.25” diameter holes at the bottom.

    BATTERY (SEALED LEAD-ACID ONLY) — J8 Listings and Approvals


    • Maximum charging circuit: normal flat charge 27.6 VCD @
    0.8 A. • UL Listed: S635.
    • Maximum battery charger capacity: 18.0 AH battery (two • MEA: 297-01-E Vol. II.
    7.0 AH batteries can be housed in the FACP cabinet. Larger • CSFM: 7165-0028:220.
    batteries require a separate battery box such as the Notifier
    BB-17). Ordering Information
    INITIATING DEVICE CIRCUIT — TB3 SFP-2402: Two-zone conventional FACP. 120 VAC, 50/60 Hz,
    • Alarm zones 1 & 2. 2.3 A.
    • Power-limited circuitry. SFP-2402E: Same as above with 240 VAC, 50 Hz, 1.15 A oper-
    ation.
    • Operation: all zones Style B (Class B).
    • Normal operating voltage: nominal 20 VDC. BB-17: Battery box, required to house two batteries greater
    than 7 AH to a maximum of 18 AH.
    • Alarm current: 15 mA minimum.
    411/411UD: Three-input (channels) model 411, and four-input
    • Short-circuit current: 40 mA maximum.
    model 411UD, dual-line Digital Alarm Communicator/Transmit-
    • Maximum loop resistance: 100 ohms. ters (DACTs). Can be used as slave communicators with the
    • End-of-line resistor: 4.7K ohm, ½ watt (P/N 71252). FACP.
    • Standby current: 4 mA. TR-1-B: Optional trim ring for semi-flush mounting.
    • Compatible devices: refer to the Notifier Device Compatibility A 4-zone version of this panel is also available. See DN-60377.
    Document PN 15378 for a complete list of compatible
    devices.

    NOTIFICATION APPLIANCE CIRCUIT — TB2


    • One NAC.
    • Power-limited circuitry.
    • Normal operating voltage: nominal 24 VDC.
    • Maximum signalling current: 2.5 A total with standard trans-
    former.
    • End-of-line resistor: 4.7K ohm, ½ watt (P/N 71252).
    • Compatible devices: refer to the Notifier Device Compatibility
    Document PN 15378 for a complete list of compatible
    devices.

    FORM-C RELAYS NOTIFIER® is a registered trademark of Honeywell International Inc.


    • Trouble Relay TB5 (fail-safe). ©2011 by Honeywell International Inc. All rights reserved. Unauthorized use
    of this document is strictly prohibited.
    • Alarm Relay TB6.
    • Relay contact ratings: 2.0 A @ 30 VDC (resistive).

    This document is not intended to be used for installation purposes.


    We try to keep our product information up-to-date and accurate.
    We cannot cover all specific applications or anticipate all requirements.
    All specifications are subject to change without notice.
    Made in the U.S. A.
    For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
    www.notifier.com

    Page 2 of 2 — DN-6876:B2 • 12/21/11

    You might also like