Scribd Logo
Upload

Welcome to Scribd!

  • 101 views

    F10 Rear Door Trim Panel Removal

    Uploaded by

    martinski Martin
    This document provides instructions for removing and installing the left or right rear door trim panel on a BMW 5 Series sedan. It describes releasing the inside door handle and removing the handle recess using special tools. It then explains how to remove the door trim panel by disengaging cables, disconnecting plugs, and removing retaining clips and screws.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    F10 Rear Door Trim Panel Removal

    Uploaded by

    martinski Martin
    101 views5 pages
    This document provides instructions for removing and installing the left or right rear door trim panel on a BMW 5 Series sedan. It describes releasing the inside door handle and removing the handle recess using special tools. It then explains how to remove the door trim panel by disengaging cables, disconnecting plugs, and removing retaining clips and screws.

    Original Description:

    BMW F10 models

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for removing and installing the left or right rear door trim panel on a BMW 5 Series sedan. It describes releasing the inside door handle and removing the handle recess using special tools. It then explains how to remove the door trim panel by disengaging cables, disconnecting plugs, and removing retaining clips and screws.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    101 views5 pages

    F10 Rear Door Trim Panel Removal

    Uploaded by

    martinski Martin
    This document provides instructions for removing and installing the left or right rear door trim panel on a BMW 5 Series sedan. It describes releasing the inside door handle and removing the handle recess using special tools. It then explains how to remove the door trim panel by disengaging cables, disconnecting plugs, and removing retaining clips and screws.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    28/06/17 1/5

    REP-REP-RAF1051-5142000   REP-REP-RAF1051-5142000 - Remove and install left or right


    rear door trim panel - V.4, VIN: XXXXXXX 

    ISTA 4.05.31.20245 Data R4.05.31 Programming -


    system version data
    version

    VIN XXXXXXX Vehicle 5'/F10/SEDAN/530i/N53/AUTO/ECE/RL/2013/05

    Int.lev.works - Int.lev. - Int.lev.(tar.) -


    (cur.)

    Mileage 0 km

    51 42 000 Remove and install left


    or right rear door trim
    panel

    Special tools required:


     64 1 020
     00 9 325

    When working on trim panel components, make


    sure that the sensitive surfaces are not
    scratched or damaged.

    Important!
    Do not under any circumstances pull on
    map pocket.

    Necessary preliminary tasks:


    Version with roller sunblind only:
     Remove roller sunblind on rear door
    side window

    Pull out inside door handle (1) and hold open


    so that catch (3) on handle recess (2) can be
    28/06/17 2/5

    released (see next operation).

    Working edge (1) of special tool 64 1 020


    points upwards and levers out catch (2) in
    direction of arrow.
    At the same time, lift up handle recess (3)
    slightly at rear so that it doesn't snap back in
    again.

    Important!
    So as not to damage optical fibre (1) on
    handle recess (2), do not set special
    tool 64 1 020 beyond distance “xmax”.

    Ideally, set special tool 64 1 020 at distance “x”


    from handle recess (2) (equivalent to tip of
    inside door handle).

    x = 30 ±3 mm

    xmax = 40 mm

    Slide in special tool 64 1 020 approx. 15 mm


    along the handle recess (2) until resistance
    against catch is felt.
    In order to release top catch, lever carefully
    downwards while moving the handle recess (2)
    28/06/17 3/5

    slightly to and fro.


    Handle recess (2) can then be removed
    forwards with a slight turn.

    Installation note:
    Retaining hooks (1) and optical fibre (2) on
    handle recess (3) must not be damaged.

    Installation note:
    Shown removed here for purposes of clarity.
    Retaining hooks (1) and catches (2) on inside
    door handle bracket (3) must not be broken or
    missing.

    Repair solution if catches (2) defective.

    Release screw (1).
    Tightening torque 51 41 1AZ.
    Unclip door trim panel (2) with special
    tool 00 9 325.

    Disengage Bowden cable (1) for release lever


    first at counter support (2) and then at door
    28/06/17 4/5

    lock (3).
    Installation note:
    Perform function check for door inside handle
    with door open and rotary striker lock closed.

    Unlock and disconnect all plug connections,


    then remove door trim panel.

    Installation note:
    Replace faulty clips (1).

    Installation note:
    Make sure Bowden cable (1) is in correct
    position!
    An incorrectly routed Bowden cable can cause
    door lock malfunctions.

    Installation note:
    After assembling the door trim panel proceed
    as follows:

    - Open side window

    - Lock with ignition key


    28/06/17 5/5

    - Check for ease of movement on locking


    button linkage

    - If necessary, align linkage

    You might also like