Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    SGC100 Datasheet

    Uploaded by

    Adrián Ponce
    Lexan SGC100 sheet is a polycarbonate sheet material with a UV-resistant cap layer that provides long-term weathering protection. It has high impact strength, clarity, and tensile properties even after 10 years of exposure comparable to South Florida. Lexan SGC100 sheet is backed by a 10-year warranty against yellowing and breakage and is suitable for thermoformed and flat signage applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SGC100 Datasheet

    Uploaded by

    Adrián Ponce
    32 views2 pages
    Lexan SGC100 sheet is a polycarbonate sheet material with a UV-resistant cap layer that provides long-term weathering protection. It has high impact strength, clarity, and tensile properties even after 10 years of exposure comparable to South Florida. Lexan SGC100 sheet is backed by a 10-year warranty against yellowing and breakage and is suitable for thermoformed and flat signage applications.

    Original Title

    SGC100 datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Lexan SGC100 sheet is a polycarbonate sheet material with a UV-resistant cap layer that provides long-term weathering protection. It has high impact strength, clarity, and tensile properties even after 10 years of exposure comparable to South Florida. Lexan SGC100 sheet is backed by a 10-year warranty against yellowing and breakage and is suitable for thermoformed and flat signage applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views2 pages

    SGC100 Datasheet

    Uploaded by

    Adrián Ponce
    Lexan SGC100 sheet is a polycarbonate sheet material with a UV-resistant cap layer that provides long-term weathering protection. It has high impact strength, clarity, and tensile properties even after 10 years of exposure comparable to South Florida. Lexan SGC100 sheet is backed by a 10-year warranty against yellowing and breakage and is suitable for thermoformed and flat signage applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Lexan* SGC100 Sheet Product Datasheet

    Description
    Lexan SGC100 Solar Grade Coextruded sheet for signs combines the impact strength of Lexan polycarbonate sheet with a proprietary UV-
    resistant cap layer that provides long-term protection against weathering. Lexan SGC100 sheet is backed by a ten-year limited written
    warranty# against yellowing, loss of light transmission and breakage. Providing long-lasting clarity over a wide range of environments, Lexan
    SGC100 sheet offers extended service life and reduced life-cycle material costs. It is an excellent candidate for all types of thermoformed or
    flat signs, whether screen printed, painted, or decorated with vinyl graphics.

    Typical Property Values 

    Property Test Method Unit Value

    Physical
    Specific gravity ASTM D792 - 1.20
    Light Transmission @ .118” thickness ASTM D1003 % 87
    Rockwell Hardness ASTM D785 - M70, R118

    Mechanical
    Tensile Strength ASTM D638 psi
    Ultimate 9,500
    Tensile Modulus ASTM D638 psi 285,000
    Flexural Strength ASTM D790 psi 13,500
    Flexural Modulus ASTM D790 psi 340,000
    Compressive Strength ASTM D695 psi 12,500
    Izod Impact Strength, up to 125 mils ASTM D256A ft-lbs/in
    Notched 12–16
    Drop Ball Impact Strength, 1” dia.dart @ .236 thickness
    SABIC Test ## ft-lbs
    @ 73°F > 200
    @ 0°F > 200

    Thermal
    Coefficient of Thermal Expansion ASTM D696 in/in/°F 3.75 x 10-5
    Heat Deflection Temperature ASTM D648 °F
    @ 264 psi 260
    @ 66 psi 280

     These typical values are not intended for specification purposes. If minimum certifiable properties are required please contact your
    local SABIC Innovative Plastics, Specialty Film & Sheet representative.
    # See actual Product Warranty for conditions that may apply.
    ## Measured by dropping a 25-pound dart (1" dia. tip) from a height of 8 feet.
    * Lexan is a trademark of SABIC Innovative Plastics IP BV

    Lexan*
    Lexan* SGC100 Sheet Product Datasheet

    UV Resistance Yellowness Index


    Lexan SGC100 sheet was exposed to accelerated QUV 10
    weathering. After exposure comparable to 10 years in
    South Florida, Lexan SGC100 sheet showed only minimal
    in yellowness, light transmission, and clarity. 7.5

    5.0

    2.5

    0.0
    2 4 6 8 10
    Years Exposed

    Impact Resistance

    Impact Resistance ¼” Lexan


    Lexan SGC100 sheet has 30 up to times the SGC100 Sheet
    impact strength of acrylic and 10 times that of
    "impact-modified" acrylic.
    ¼ “ Modified
    Acrylic Drop Dart Test.
    5-pound steel dart
    1” dia.tip.
    ¼” Acrylic

    0 25 50 75 200
    Measured in foot-pounds

    Americas: Europe: Pacific:


    SABIC Innovative Plastics SABIC Innovative Plastics SABIC Innovative Plastics
    Specialty Film & Sheet Specialty Film & Sheet Specialty Film & Sheet
    One Plastics Avenue Plasticslaan 1 1266 Nanjing Road (W)
    Pittsfield, MA 01201 NL - 4612 PX Bergen op Zoom 16th Floor, Plaza 66
    USA The Netherlands 200040 Shanghai
    Tel. (1) (413) 448 5400 Tel. (31) (164) 292911 China
    Fax. (1) (413) 448 7506 Fax. (31) (164) 293272 Tel. (86) 21 6288 1088
    Toll free: 1-800 451 3147 Fax. (86) 21 6288 0818

    THE MATERIALS, PRODUCTS AND SERVICES OF SABIC INNOVATIVE PLASTICS HOLDING BV, ITS SUBSIDIARIES AND AFFILIATES (“SELLER”), ARE SOLD
    SUBJECT TO SELLER’S STANDARD CONDITIONS OF SALE, WHICH CAN BE FOUND AT http://www.sabic-ip.com AND ARE AVAILABLE UPON REQUEST.
    ALTHOUGH ANY INFORMATION OR RECOMMENDATION CONTAINED HEREIN IS GIVEN IN GOOD FAITH, SELLER MAKES NO WARRANTY OR GUARANTEE,
    EXPRESS OR IMPLIED, (i) THAT THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR
    SAFETY OF ANY DESIGN INCORPORATING SELLER’S PRODUCTS, SERVICES OR RECOMMENDATIONS. EXCEPT AS PROVIDED IN SELLER’S STANDARD
    CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS PRODUCTS OR SERVICES DESCRIBED HEREIN.
    Each user is responsible for making its own determination as to the suitability of Seller’s products, services or recommendations for the user’s particular use
    through appropriate end-use testing and analysis. Nothing in any document or oral statement shall be deemed to alter or waive any provision of Seller’s
    Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by Seller. No statement by Seller concerning a possible use
    of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right of Seller or as a
    recommendation for the use of such product, service or design in a manner that infringes any patent or other intellectual property right.

    SABIC Innovative Plastics is a trademark of Sabic Holding Europe BV


    * Trademark of SABIC Innovative Plastics IP BV

    www.sabic-ip.com Latest update SABIC (01/08)

    You might also like