Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Setup Plan Technical Center: Mold +

    Uploaded by

    Victor Moren
    This document provides a setup plan for an injection molding machine. It includes details like the article being molded, a drawing number, mold information, material type, drying conditions, machine type, and molding parameters. The plan outlines temperatures, times, speeds and pressures for various stages of the molding cycle. It also includes information on ejector settings and temperatures for different zones of the hot runner system.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Setup Plan Technical Center: Mold +

    Uploaded by

    Victor Moren
    28 views4 pages
    This document provides a setup plan for an injection molding machine. It includes details like the article being molded, a drawing number, mold information, material type, drying conditions, machine type, and molding parameters. The plan outlines temperatures, times, speeds and pressures for various stages of the molding cycle. It also includes information on ejector settings and temperatures for different zones of the hot runner system.

    Original Description:

    Boge rubber

    Original Title

    176-798_678

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a setup plan for an injection molding machine. It includes details like the article being molded, a drawing number, mold information, material type, drying conditions, machine type, and molding parameters. The plan outlines temperatures, times, speeds and pressures for various stages of the molding cycle. It also includes information on ejector settings and temperatures for different zones of the hot runner system.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    28 views4 pages

    Setup Plan Technical Center: Mold +

    Uploaded by

    Victor Moren
    This document provides a setup plan for an injection molding machine. It includes details like the article being molded, a drawing number, mold information, material type, drying conditions, machine type, and molding parameters. The plan outlines temperatures, times, speeds and pressures for various stages of the molding cycle. It also includes information on ejector settings and temperatures for different zones of the hot runner system.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 4

    Setup Plan Technical Center

    Page 1

    Article: Gleitschiene Art of nozzle: open


    Drawingnumber: 762 326 154 678 Nozzle length: 120 mm Cavity number: 4
    Mould: 176-798 Nozzle bore: 6 mm Article weight: 21,2 g
    Material: Stanyl TW341 PA4.6 Nozzle radius: 15 mm Article weight: g
    Pre-drying: 80 °C 240 min Machine type: ENGEL Shot weight: 84,92 g
    Metal part: Screw Ø: 35 mm Location:
    Setter: Birkholz Date: 2019-03-28

    Mold Barrel Heating °C


    Mold height: mm Noz. Noz.2 1 2 3 4 5 6 7 8 +/-
    Mold opening: 350 mm 310 310 305 300 290 10

    Mold close position: mm Inject. Time +/- Holding Time Cooling time Cycletime
    Mold protection: 90 mm 1,9 0,2 s 15 s 12 s 34 s
    Time s
    Clamp force kn Injection speed
    1. 2. 3. 4. 5. 6. 7. 8. 9. 10. +/-
    93,3 cm³
    Ejector 22 28 36 40 42 42 42 42 42 42 42
    Ejector retard pos. mm mm/s
    Ejector advanced pos. mm
    Ejector shake counter times Switch over pos./ Pressure Cushion min: Cushion max: Injection P. max
    Ejector shake pos. mm 22,3 cm³ 357 abs 2 cm³ 8 cm³ 860 abs
    Ejector advace delay s mm rel mm mm rel
    Ejector retard delay s Holding pressure
    1. 2. 3. 4. 5. 6. 7. 8. 9. 10. +/-
    0 15 s
    Core 600 600 600 600 600 600 600 600 600 600 bar (abs)
    moving side 0 fix side 0 bar (rel)
    Nr. start prio Nr. start prio
    Nr. In Out Nr. In Out Plasticizing Decompression
    mm mm 1. 2. 3. 4. 5. 6. 7. 8. +/- s
    mm mm 0,25 0,25 m/s 2,1 cm³
    mm mm 78 78 78 78 78 78 78 78 bar
    mm mm
    mm mm
    mm mm Microflow
    Nozzle stroke start stop set tol.
    0 mm 83,7 cm³ 26,9 cm³ 306 20 bar
    ShotOff Nozzle 0 delay mm mm
    Open Mode Close Mode
    Nr. Delay/Pos. Time from: Delay/Pos. Time from:

    1 Hotrunner
    2 Zone Name Temp.C° Zone Name Temp.C° Zone Name Temp.C°
    3 1 Nozzle 310 11 21
    4 2 Nozzle 310 12 22
    5 3 Nozzle 310 13 23
    6 4 Nozzle 300 14 24
    Notes: 5 Inlet 300 15 25
    6 Manifold 300 16 26
    7 Manifold 300 17 27
    8 18 28
    9 19 29
    10 20 30

    Temperature control devices Mold temp.


    Connectors °C +- l/min °C
    Name desired
    1 FS HB-Therm Inserts + Plate 95
    2 MS HB-Therm Slider 95 6,8
    3 MS HB-Therm C7+C8+I5+I6 95 4,6

    Setup Plan Technical Center


    Page 2

    Article: Gleitschiene Location: 0


    Drawingnumber: Date:
    Mould: Setter:

    , if not exist then use external 5/2 way external valve


    Comments
    min rejects in succession: 10

    Hotrunner +20°C at StarUp the process


    Trial run report

    Article: Gleitschiene Location: 0


    Drawingnumber: 762 326 154 678 Date: 0
    Mould: 176-798 Setter: Birkholz

    Comments

    You might also like