Scribd
Upload
74 views6 pages

Ehang Play User Toolkit Manual

The document is an instruction manual for updating the firmware of the EHang GHOST 2.0 drone using the EHang GHOST 2.0 User Toolkit. It details downloading and installing the toolkit software on Windows operating systems, connecting the drone to the computer, downloading the latest firmware version, initiating the update process, and confirming when the update is complete. The update is intended to improve flight performance and the user experience of operating the GHOST 2.0 drone.

Uploaded by

atk meras
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views6 pages

Ehang Play User Toolkit Manual

The document is an instruction manual for updating the firmware of the EHang GHOST 2.0 drone using the EHang GHOST 2.0 User Toolkit. It details downloading and installing the toolkit software on Windows operating systems, connecting the drone to the computer, downloading the latest firmware version, initiating the update process, and confirming when the update is complete. The update is intended to improve flight performance and the user experience of operating the GHOST 2.0 drone.

Uploaded by

atk meras
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

EHang GHOST 2.

0 Toolkit Manual

EHang GHOST 2.0 User Toolkit Manual

GHOSTDRONE 2.0 Created by EHang Inc.


EHang GHOST 2.0 Toolkit Manual

Contents
1. About........................................................................................................................................ 2
2. System Requirements...............................................................................................................2
3. Instructions............................................................................................................................... 2

1. About
The firmware of GHOSTDRONE will be updated to the latest version
available at the time of shipping. However, EHang have been and will be
updating the firmware to improve the flight performance and offer better user
experience. It is strongly recommended that users download the EHang GHOST
2.0 User Toolkit to keep the firmware of your GHOSTDRONE up to date.

2. System Requirements.
Currently EHang GHOST 2.0 User Toolkit only supports Windows 10,
Windows 8.1, Windows 8 , Windows 7 operating system.

3. Instructions
3.1. Unzip the file. Click “EHangGHOST2UserToolkit.exe” to install the toolkit.
Once it is installed, a shortcut will be created on the desktop as shown below.

3.2. Double click the “EHang GHOST 2.0 User Toolkit” icon to open the user
toolkit.
EHang GHOST 2.0 Toolkit Manual

3.3. Connect the aircraft to the computer with USB cable. Click “Connect” only
when you see the headlight of GHOSTDRONE is flashing steadily. Once
GHOSTDRONE is successfully connected to User Tool Kit, you should see
the screen below.
EHang GHOST 2.0 Toolkit Manual

3.4. Click “Update firmware”.The latest firmware update will be downloaded to


your computer. When download is completed, you will see the lastest
firmware version and its release date.

3.5. Click “Update now” and follow the instructions in the pop-up window.
Disconnect the USB cable from the computer and re-connect it in 30
seconds, the firmware update process will start. And the progress will be
shown in the pop-up window below.
EHang GHOST 2.0 Toolkit Manual

3.6. After the firmware has been updated, there will be a pop-up window for
configuring the parameters in the flight control system. Wait until the
headlight of GHOSTDRONE is flashing steadily, then click “Connect”. And
the progress will be shown in the pop-up window.
EHang GHOST 2.0 Toolkit Manual

3.7. When the progress bar reaches 100%, updating is completed. And you will
see the confirmation screen as below.

You might also like