0% found this document useful (0 votes)
39 views2 pages

Microprocessor - Overview

A microprocessor is a controlling unit of a microcomputer fabricated on a small chip capable of performing arithmetic and logical operations. It consists of an arithmetic logic unit (ALU), register array, and control unit. The microprocessor fetches instructions from memory, decodes them, and executes them by sending results to output ports using registers and the ALU. Key terms include instruction set, clock speed, word length, and data types. Microprocessors are cost-effective, small in size, low power, versatile, and reliable.

Uploaded by

Alok Ankit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
39 views2 pages

Microprocessor - Overview

A microprocessor is a controlling unit of a microcomputer fabricated on a small chip capable of performing arithmetic and logical operations. It consists of an arithmetic logic unit (ALU), register array, and control unit. The microprocessor fetches instructions from memory, decodes them, and executes them by sending results to output ports using registers and the ALU. Key terms include instruction set, clock speed, word length, and data types. Microprocessors are cost-effective, small in size, low power, versatile, and reliable.

Uploaded by

Alok Ankit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

20/03/2023, 16:30 Microprocessor - Overview

Microprocessor - Overview

Microprocessor is a controlling unit of a micro-computer, fabricated on a small chip capable of


performing ALU (Arithmetic Logical Unit) operations and communicating with the other devices
connected to it.

Microprocessor consists of an ALU, register array, and a control unit. ALU performs arithmetical
and logical operations on the data received from the memory or an input device. Register array
consists of registers identified by letters like B, C, D, E, H, L and accumulator. The control unit
controls the flow of data and instructions within the computer.

Block Diagram of a Basic Microcomputer

How does a Microprocessor Work?


The microprocessor follows a sequence: Fetch, Decode, and then Execute.

Initially, the instructions are stored in the memory in a sequential order. The microprocessor
fetches those instructions from the memory, then decodes it and executes those instructions till
STOP instruction is reached. Later, it sends the result in binary to the output port. Between these
processes, the register stores the temporarily data and ALU performs the computing functions.

List of Terms Used in a Microprocessor


Here is a list of some of the frequently used terms in a microprocessor −

Instruction Set − It is the set of instructions that the microprocessor can understand.

Bandwidth − It is the number of bits processed in a single instruction.

Clock Speed − It determines the number of operations per second the processor can
perform. It is expressed in megahertz (MHz) or gigahertz (GHz).It is also known as Clock
Rate.

https://www.tutorialspoint.com/microprocessor/microprocessor_overview.htm 1/2
20/03/2023, 16:30 Microprocessor - Overview

Word Length − It depends upon the width of internal data bus, registers, ALU, etc. An 8-bit
microprocessor can process 8-bit data at a time. The word length ranges from 4 bits to 64
bits depending upon the type of the microcomputer.

Data Types − The microprocessor has multiple data type formats like binary, BCD, ASCII,
signed and unsigned numbers.

Features of a Microprocessor
Here is a list of some of the most prominent features of any microprocessor −

Cost-effective − The microprocessor chips are available at low prices and results its low
cost.

Size − The microprocessor is of small size chip, hence is portable.


Low Power Consumption − Microprocessors are manufactured by using metaloxide
semiconductor technology, which has low power consumption.
Versatility − The microprocessors are versatile as we can use the same chip in a number of
applications by configuring the software program.
Reliability − The failure rate of an IC in microprocessors is very low, hence it is reliable.

https://www.tutorialspoint.com/microprocessor/microprocessor_overview.htm 2/2

You might also like