Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Untitled

    Uploaded by

    Danica Camagong
    This document provides general notes for an electrical installation project that must follow the Philippine Electrical Code and requirements of the local utility. It specifies that the electrical supply voltage is 230V, single phase, and that all wiring must be enclosed in PVC conduit except for the power service, which uses rigid steel conduit. The minimum wire size is 2.5 sq. mm and the conduit size is 15mm diameter. All materials must be new and approved, and installation requires supervision by a licensed engineer or electrician.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Untitled

    Uploaded by

    Danica Camagong
    13 views1 page
    This document provides general notes for an electrical installation project that must follow the Philippine Electrical Code and requirements of the local utility. It specifies that the electrical supply voltage is 230V, single phase, and that all wiring must be enclosed in PVC conduit except for the power service, which uses rigid steel conduit. The minimum wire size is 2.5 sq. mm and the conduit size is 15mm diameter. All materials must be new and approved, and installation requires supervision by a licensed engineer or electrician.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides general notes for an electrical installation project that must follow the Philippine Electrical Code and requirements of the local utility. It specifies that the electrical supply voltage is 230V, single phase, and that all wiring must be enclosed in PVC conduit except for the power service, which uses rigid steel conduit. The minimum wire size is 2.5 sq. mm and the conduit size is 15mm diameter. All materials must be new and approved, and installation requires supervision by a licensed engineer or electrician.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views1 page

    Untitled

    Uploaded by

    Danica Camagong
    This document provides general notes for an electrical installation project that must follow the Philippine Electrical Code and requirements of the local utility. It specifies that the electrical supply voltage is 230V, single phase, and that all wiring must be enclosed in PVC conduit except for the power service, which uses rigid steel conduit. The minimum wire size is 2.5 sq. mm and the conduit size is 15mm diameter. All materials must be new and approved, and installation requires supervision by a licensed engineer or electrician.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    GENERAL NOTES

    1. ALL ELECTRICAL WORKS INDICATED HERE IN SHALL BE DONE IN ACCORDANCE WITH THE
    LATEST EDITION OF PHILIPPINE ELECTRICAL CODE , THE REQUIREMENTS OF THE LOCAL
    BUILDING OFFICIAL AND ELECTRIC UTILITY SERVING THE AREA.
    2. THE ELECTRICAL SUPPLY/SERVICE VOLTAGE IS 230V, SINGLE PHASE, TWO WIRES,
    GROUNDED, 60 HZ.
    3. CONTRACTOR SHALL VERIFY AND ORIENT THE ACTUAL LOCATIONS OF CONCRETE TERMINAL.
    4. ALL INSTALLATION SHALL BE INCASED IN PVC PIPE OR FLEXIBLE CONDUIT EXCEPT POWER
    SERVICE WHICH SHALL BE IN RSC.
    5. THE MINIMUM SIZE OF WIRE SHALL BE 2-3.5 SQ.MM AND 15MMØ CONDUIT
    6. ALL MATERIALS SHALL BE NEW AND APPROVED TYPE. APPROPRIATE FOR BOTH LOCATION
    AND INTENDED USE.
    7. ELECTRICAL INSTALLATION SHALL BE UNDER A DIRECT SUPERVISION OF DULY LICENSED
    ELECTRICAL ENGINEER OR REGISTERED MASTER ELECTRICIAN.
    8. NO REVISION IN THE DESIGN SHALL BE DONE WITHOUT PRIOR KNOWLEDGE AND APPROVAL
    OF THE DESIGNER AND THE OWNER.
    9. GROUND RESISTANCE HALL NOT EXCEED 25 OHMS.
    10. MOUNTING HEIGHTS FOR SWITCHES AND CONVINIENCE OUTLET SHALL BE IN 1.37M AND 0.30M
    RESPECTIVELY, UNLESS OTHERWISE INDICATED IN ARCHITECTURAL PLANS.
    PERSPECTIVE
    GENERAL NOTES
    LEGENDS MC DONALD'S
    KILOWATTHOUR METER Sa ONE GANG SWITCH

    D
    M

    LV
    CIRCUIT BREAKER Sab TWO GANG SWITCH

    OB
    LIGHTING AND POWER PANEL Sabc THREE GANG SWITCH

    LIN
    THREE-WAY, ONE GANG

    MO
    CIRCUIT HOMERUN S3a
    1
    SWITCH
    THREE-WAY, TWO GANG
    SERVICE ENTRANCE S3ab
    SWITCH SITE
    THREE-WAY, THREE GANG
    DUPLEX CONVENIENCE OUTLET S3abc
    SWITCH
    DUPLEX CONVENIENCE OUTLET WITH
    GROUND FAULT CIRCUIT INTERRUPTER R
    RECESSED LED LUMINAIRE
    GFCI
    PUMP OUTLET SUSPENDED LED LUMINAIRE ROBINSONS
    WALL-MOUNTED LED
    P SUPERMARKET
    LAUNDRY OUTLET
    L LUMINAIRE
    ABOVE-WALL-MOUNTED LED
    REFRIGERATOR OUTLET
    REF LUMINAIRE
    RANGE
    RANGE OUTLET FLOOR MOUNTED LUMINAIRE
    FLOOR MOUNTED OUTLET FLUORESCENT LAMP
    ACU
    AIR CONDITIONING UNIT CHANDELIER VICINITY MAP
    STUDENT NAME PROFESSOR SCHOOL PROJECT TITLE / LOCATION SHEET CONTENT SHEET NUMBER
    DANICA V. CAMAGONG TECHNOLOGICAL UNIVERSITY OF PROPOSED TWO STORY SINGLE
    BSEE - 4B ENGR. LYNDON BAGUE THE PHILLIPINES MANILA
    AS SHOWN E
    FAMILY DWELLING 1
    SCALE
    TUPM-22-17584 COLLEGE OF ENGINEERING BS ELECTRICAL ENGINEERING BACOOR, CAVITE 1:200

    You might also like