The quick e-Guide to

Transportation Modeling:
Mastering sustainability, safety,
and efficiency in mobility
For mobility and transport planners

Written and produced by

Sagi Or, Tomasz Piernicki, Anna Wiegel
Table of contents

Introduction.................................................................................................. 4
Success story: Australia..................................................................... 12


What are transport models used for?................................. 14

Success story: EU................................................................................. 20


Principles and methods

of transportation modeling.......................................................... 22
Success story: London....................................................................... 26


Success story: Switzerland............................................................... 32



How to skillfully build

a transportation model.................................................................... 38
Success story: Abu Dhabi.................................................................. 44


Achieving sustainability, safety,

and efficiency in mobility................................................................ 50
Success story: E-charging................................................................. 54


Transportation modeling with

PTV Group technology...................................................................... 56

e-Guide to Transportation Modeling 3

01 Introduction

4 e-Guide to Transportation Modeling 5

What is transportation modeling?
How do you create a transportation
model and how are they used?
What are the so-called “four steps”
of transportation modeling?
What is activity- or agent-based
modeling?

This e-Guide answers the most important

questions concerning this topic.
6 e-Guide to Transportation Modeling 7
Prologue What is transportation modeling?
Today, city and traffic planners must balance between various com- Transport models are the foundation of transportation and traf-
peting demands. The transition towards a more sustainable mobility fic planning. Transportation systems involve many components and
ecosystem is more urgent than ever in order to meet challenges like stakeholders, each with their own perspective and interests. Further,
climate change and growing urbanization - and to shape livable envi- transportation is closely linked to many other aspects of society.
ronments.
Therefore, transportation planning is not usually about finding the
At the same time, the demand for mobility and easily accessible means ‘one optimal solution’, but considering a range of possible measures,
of transport is growing steadily. Everyone expects safe, accessible, policies and external conditions and then suggest suitable actions for
fast, and comfortable transportation. Planners are therefore tasked political or commercial decision making. This is called “what-if” analy-
with coming up with reliable transport solutions that are affordable, sis, or scenario analysis.
efficient, and equitable.
Transportation modeling tools enable the modeling experts to quickly
In transport planning and the development of advanced mobility sys- develop different scenarios for a transport network and test them un-
tems, forecasting travel behavior and demand for travel plays a crucial der a range of assumed future demographic or economic conditions.
role. Only if you can estimate how and where people will be traveling
The question of where people will live and work in the future and how
in the coming years, you can make the right decisions for a future mo-
and where they will travel is crucial for planning infrastructure and
bility system.
transport services and for creating a future-proven mobility system.
Traffic modeling and sim- Travel demand models represent all transport-relevant decision pro-
ulation enables planners cesses that make people move.
to understand the current
Within a model, future scenarios for population growth, land use,
issues in their transporta-
transport networks and mobility behavior can be built to assess the
tion system, identify oppor-
impact of these changes. This enables planners to determine whether
tunities and forecast and
a new highway lane is needed, how the public transportation network
measure effects of devel-
should be expanded to meet demand, where locations for new bus
opment planning. It serves
terminals or logistics hubs should be sited, or how people’s mobility
as the base to make sound
behavior will change with autonomous vehicles.
decisions and set the right
framework for the future of
transportation.

8 e-Guide to Transportation Modeling 9

What is the purpose Transportation modeling
of a transport model? enables planners to:
Transport models are the foundation of transportation and traf- develop advanced and future-proofed transport strategies
fic planning. Transportation systems involve many components and and solutions,
stakeholders, each with their own perspective and interests. Further, conduct traffic analyses and forecasts,
transportation is closely linked to many other aspects of society.
plan public transport services,
Therefore, transportation planning is not usually about finding the
determine ways to implement and foster infrastructure for
‘one optimal solution’, but considering a range of possible measures,
active mobility, such as cycling,
policies and external conditions and then suggest suitable actions for
political or commercial decision making. This is called “what-if” analy- set framework to adapt to new mobility services, such
sis, or scenario analysis. as autonomous vehicles.
Transportation modeling tools enable the modeling experts to quickly
develop different scenarios for a transport network and test them un-
der a range of assumed future demographic or economic conditions.

The question of where people will live and work in the future and how
and where they will travel is crucial for planning infrastructure and
transport services and for creating a future-proven mobility system.
Travel demand models represent all transport-relevant decision pro-
cesses that make people move.

Within a model, future scenarios for population growth, land use,

transport networks and mobility behavior can be built to assess the
impact of these changes. This enables planners to determine whether
a new highway lane is needed, how the public transportation network
should be expanded to meet demand, where locations for new bus
terminals or logistics hubs should be sited, or how people’s mobility
behavior will change with autonomous vehicles.

10 e-Guide to Transportation Modeling 11

 Transportation modeling success story

Demand model helps

Australian city grow
Melton, northwest of Melbourne, is one of the fastest growing popula-
tion centers in Victoria, Australia. With a population of over 200,000, it
is forecast to grow to over 450,000 inhabitants by 2051.

On such a rapid growth trajectory, Melton faces a lot of challenges to

ensure its infrastructure and its connection to Melbourne are keeping
up. Therefore, the city council decided to develop an integrated trans-
port model, set up with PTV Visum.

PTV Visum was selected because of its advanced demand modeling

and public transport functionalities, as well as its unique Simulation
Based Assignment (SBA). SBA is a mesoscopic assignment method that
enables planners to simulate individual vehicles and their interaction
with each other and the road network. The result is a more detailed
and realistic performance representation. SBA is also extremely help-
ful to understand the impacts of signals and other intersection types
on the flow of traffic.

The city-wide model was deployed in June 2022, covering 836 travel
zones, 432 intersections and 103 signals. Since then, it has been used
in the planning of major infrastructure projects, as well as in the plan-
ning for the city’s population growth.

12 e-Guide to Transportation Modeling 13

02 What are transport
models used for?

14 e-Guide to Transportation Modeling 15

Transportation masterplans Public Transport planning
& infrastructure planning A comprehensive public transportation system supports a sustainable,
Cities and transportation agencies today face the challenge of creating livable city where more people use transit as a preferred transporta-
a mobility infrastructure that satisfies all needs. Not only in terms of ef- tion choice. Concurrently, as public transport should be accepted and
ficient movement of people and goods, but also concerning planning used by every citizen, it should be inclusive and accessible to all.
goals such as safety and sustainability. Transport modeling helps to To make public transportation the preferred choice of more people,
plan and design new infrastructure while taking future developments planners need to address multiple questions: How can the public trans-
into account and making them easily adaptable to changing demo- port network be expanded? Where does a new bus line make sense,
graphic, economic or spatial conditions. where are new stops needed? Which frequency serves the demand
and creates an attractive offer?
Transportation modeling supports:
Transport modeling provides a detailed representation of all modes of
Planning & design of new infrastructure
public transport such as bus, taxi, as well as heavy and light rail. It al-
Long term development of transportation infrastructure lows planners to design reliable transit services which optimally serve
according to demographic projections and land use passengers needs and allow efficient operations.
development
Transport models support:
Accessibility to different services and by various modes
of transport Development of future lines & timetables (1, 5, 10 years)

Fleet planning & long-term vehicle procurement,

vehicle allocation

Planning for operation of electric buses

Planning of services

Subnetwork tendering in public transit agencies

Allocation of revenues & subsidies to operators by agency

Evaluation of fare structures

Analysis of passenger counts

Rider equity analysis

16 e-Guide to Transportation Modeling 17

Development of transportation policies
and regulations
Transportation models provide an important basis for defining frame-
work conditions and regulations in transportation policy. For example,
in the introduction of low emission zones or other traffic regulations,
or as a basis for efficient traffic management.

New mobility planning

The future of mobility is gearing towards electric and autonomous
vehicles.  In addition, ride and vehicle sharing are increasingly impor-
tant. Transport planners must adapt to these new mobility services and
make the necessary changes to serve their community’s needs. How
can the charging infrastructure for e-mobility be strategically planned?
What impact will autonomous vehicles have on traffic flow and road ca-
pacity? How can on-demand and sharing services be planned in such a
way that they enrich existing public transport services? Transportation
modeling is indispensable for setting the right course for a future-ori-
ented mobility ecosystem.

18 e-Guide to Transportation Modeling 19

 Transportation modeling success story

EU-wide model improves

transport & energy
Most borders across the European Union are open, allowing free move-
ment of people and goods without bureaucracy. To ensure the conti-
nent’s transportation networks continue to flow, the EU Commission
now uses modeling software PTV Visum, supplied by PTV Group.

PTV Visum is used in the development of TRIMODE - a multimodal

transport model covering in detail all freight and passenger transport
movements across Europe. The model also considers economic fac-
tors that generate transport demand, and how mobility affects the en-
vironment and the energy market.

TRIMODE is to become a robust, fully operational, and integrated

modeling system, with PTV Visum at its core. The overall development
phase lasted 43 months.

Based on PTV Visum, TRIMODE combines information about private

modes of mobility, local and international public transport, demand
models for passengers and freight, and economic and energy models.

TRIMODE will be used to forecast transport flows and to assess plan-

ning strategies and policies, considering population and economic
growth, and infrastructure schemes. The model forecast up to the year
2050 but can be extended even further.

20 21
03 Principles
and methods
of transportation
modeling

22 e-Guide to Transportation Modeling 23

What are
The three terms refer to the level of detail in which road traffic, in par-
ticular, is modeled.

In macroscopic models, traffic is modeled with a flow model like flu-

macroscopic,
ids, generating outputs as fractional volumes on links and turns. Mac-
roscopic models can be used to assess traffic in large scale networks,
at the expense of simulation detail.

In contrast, microscopic models provide a detailed simulation of in-

mesoscopic,
dividual vehicles, with their acceleration, deceleration, and precise
movements along links and through intersections. The output of mi-
croscopic models are therefore detailed trajectories of individual vehi-
cles. The higher computational requirements render them less appli-

and
cable to large scale networks. 

Mesoscopic models, also known as simulation-based assignment

models, combine aspects of both models, by simulating traffic in large
scale networks through a simplified vehicle movement models which

microscopic
omit aspects like acceleration or deceleration. Mesoscopic models pro-
vide enough detail for assessment of traffic management measures
and others, while still being applicable to large scale networks.

models?

24 e-Guide to Transportation Modeling 25

 Transport modeling success story

London’s new standard for

traffic model runtime
Transport for London (TfL) is responsible for the capital city’s transport
system. Its Operational Network Evaluator (ONE) is a tactical highway
traffic assignment model, used to assess the impact of schemes and to
evaluate mitigation strategies.

Built in PTV Visum, ONE provides a simplified representation of re-

al-world road traffic conditions. It is one of the largest and most de-
tailed junction-based highway models in the world: It covers 5,692
zones; 53,500 kilometers of links; and over 17,000 junctions modeled
in detail, of which more than 5,500 are signalized.

The ONE model in PTV Visum has been intensively used by TfL for
many years, with excellent results. It has helped to assess the impact
of schemes including cycle routes and major road redesign schemes.
It also helped the operational analysis of road and river crossing clo-
sures, and their impact on bus journey times.

Recently, TfL updated the model with the latest version PTV Visum
2022, which includes a move from scripted to built-in assignment. As a
result, the model sets a new standard for the industry for highway as-
signment runtimes on regular hardware. It converges within 2.5 hours,
including a bespoke outer loop for taxi in bus-lane adjustments. With-
out this outer loop, which is unique to TfL’s application, the runtime
would be even shorter - less than 1 hour!

These faster run times will significantly increase the computation

resources available for the TfL team and speed up the assessment
of transport schemes in London.

26 e-Guide to Transportation Modeling 27

What methods are used for destination and the effort required to get there such as road distance,
travel time, and toll/cost. The result is that the original demand of a
transportation modeling? TAZ is split across several destination zones. Depending on the seg-
mentation of the model, multiple distribution matrices may be gener-
ated, for example by trip purpose or household income.
Depending on the required level of detail and accuracy, the forecast
period, available input data, resources and know how, different math- Step 3: Mode Choice – what travel mode is used for each trip
ematical approaches can be used.
In the third step, trips between the TAZs are allocated to different
Historically, an aggregate methodology referred to as the 4-step-mod- transport modes. The mode of transport people use depends on their
el, or trip-based model, has been most used. Recently, more detailed preferences, and personal aspects such as car ownership. Other fac-
disaggregate approaches referred to as activity-based models or tors that affect the modal split are travel time, cost, parking availability,
agent-based models (ABM) have been implemented in many locations. and number of transfers. These variables and parameters are typically
incorporated into a logit model to calculate the split of demand across
Both approaches, and some other model types are explained in the
the modes. As an output of the mode choice procedure, the trip ma-
following:
trices from the distribution step are further refined into trip matrices
per mode.
The classical 4-step travel demand Step 4: Trip Assignment – what is the route of each trip?
modeling process
In the assignment step, the trips between an origin and destination by
The 4-step-process is an established methodology for urban, regional, a particular mode are ‘assigned’ to a specific path. This means that the
and national travel demand modeling. The aggregate planning trans- trip matrices from the prior steps are used as an input to assign route
portation model compromises of four steps related to travel choices. flows to the actual transportation network. Traffic volumes for road
Step 1: Trip generation – how many trips are generated? segments (or links) and transit vehicle loads are generated, and often
analyzed as a result.
This deals with the question of how many trips originate in or are des-
tined for a particular travel analysis zone (TAZ). The trips generated There are different network assignment procedures for different types
are related to different purposes, for example, work, shopping, or lei- of transport modes:
sure. The production and attraction of trips are driven by so-called trip Road traffic assignment: For road-based traffic by cars, heavy

rates, averages based on the number of people in households or the goods vehicles, etc., which are constrained by road capacity,
number of vehicles available. The output of the trip generation step is iterative equilibrium network assignment procedures are ap-
a set of production and attraction values associated with each zone. plied. The assignment procedures shift fractions of travel de-
Step 2: Trip distribution – where do trips go? mand between different routes, until all routes allocated to
each pair of origin-destination zones experience similar travel
Destination choice is the second component of four-step transporta- time (or generalized cost).
tion planning. The trip distribution step matches trip origins with des-
tination. This is done by weighing the attractiveness of the potential

28 e-Guide to Transportation Modeling 29

 Public Transport assignment: The process of assigning public
 as well which makes estimating tolled/priced travel and active mode
transport trips works differently from road assignments. Pub- travel more accurate.
lic transit networks consist of distinct transit lines with specific
ABM models generate daily activity plans covering each person’s rel-
service frequencies and possible stop waiting times. Different
evant activities along with their location, timing, mode, and in some
factors influence the journey experience, such as travel and
cases route.  This synthetic travel diary provides much higher spatial
waiting times and number of transfers, and they are consid-
and temporal resolution of model outputs for analysis. As the results
ered in a choice model. Various trip connection alternatives
are generated as individual tours, trips, and activities, they are easi-
are derived from the public transit network and the timetable.
er for non-experts to understand than the traditional fractional traffic
Trips are then distributed to these alternatives based on trav-
flows generated by aggregate models. On the other hand, setting up
eler preferences and the resulting public transit network line,
and calibrating ABM models is more complex than aggregate models.
stop, and vehicle boardings and volumes available for analysis.

Active modes / Bike assignment: Route choices and travel


speeds of cyclists are influenced by other factors than of driv-
ers. Therefore, choice models reflecting this are applied for as-
signing active mode travel to different route alternatives.

Disaggregate Activity-based / Agent-based

models (ABM)
In contrast to aggregate trip-based models, disaggregate models
model people and/or households individually and often with more
precise home and activity locations. Since individual data is not avail-
able for the entire population, a ‘synthetic population’ of households
and persons is generated from statistical data and distributions of key
variables such as household income and person age.

The general choice model structure applied in ABM is very flexible.

The person and household attributes attached to each individual, as
well as their previous decisions, can be considered in each subsequent
choice step. This allows a more realistic representation of their mobil-
ity in terms of travel during the simulation day as household context
variables, long-term decisions (e.g., car ownership), and tour variables
(e.g., drove to work) can be used to estimate travel decisions more
precisely. Understanding of time and space is typically more precision

30 e-Guide to Transportation Modeling 31

 Transport modeling success story

Swiss trains plan the future

with ABM modeling
Swiss Federal Railways (SBB) carries every day over 1.3 million passen-
gers and 200,000 tons of goods. It operates over 10,000 trains daily.

SBB aims to enable customer-oriented door-to-door mobility solu-

tions for future travelers. To that end, it applies an Activity-Based Mod-
el (ABM) that simulates travel as individual and interwoven decisions
for each inhabitant of the country on a typical weekday. In 2018, PTV
Group and SBB initiated a collaboration for the development of an
ABM of Switzerland, using PTV Visum software.

Fully disaggregated mobility decisions for every single inhabitant over

the course of a day result in a large and comprehensive data set. PTV
Visum is used to generate, store, manage, and visualize the model
data. The outputs are used for planning processes at SBB, including
decisions about future investments, rail service concepts, and strate-
gies.

The PTV Visum model provides:

Efficient data structure

Methodology for an ABM model

Optimized solutions for certain model steps

Run time of 12 hours for country-wide demand scenario

Those features allow SBB to simulate and deliver a wide range of sce-

narios and forecasts, as well as customer-oriented mobility solutions.

32 e-Guide to Transportation Modeling 33

Other modeling methods How is freight transport and commercial traffic
Aggregate tour-based / activity-based models
 considered?
While maintaining the spatial aggregation and segmentation Freight transport, as well as commercial and service activities, gener-
of the classical 4-step models, aggregate tour-based models ates a large share of the overall traffic volume. Due to the large vari-
consider tours of individuals spanning multiple activities at dif- ety of operations involved, and the heterogeneity and complexity of
ferent locations. They incorporate some aspects of ABM mod- logistics chains, modeling commercial and freight transportation is
els and some aspects of the traditional aggregate models. less standardized. The availability of input data and the calibration of
models restrains a wide application of these models.
Incremental / pivot-point models

Pivot-point models are like simple growth models that relate Many smaller scale models (for urban areas) only roughly assess com-
growth to a relevant variable (such as change in ticket price) in mercial and freight traffic. More complex, bespoke models are often
that they estimate changes in travel demand from changes in built on the national scale for assessing freight transport based on in-
travel cost. But instead of simply applying a fixed elasticity re- ternal and external supply chains
lated to one or a few selected variables, they typically reflect the
complex choices travelers take in an incremental logit model.
As this approach allows to consider various variables influenc-
ing travel choices, it has been widely adopted in transportation
planning. Some national guidelines for project appraisal provide
detailed instructions and model parameters for the workflow.

Multimodal modeling

For many travelers, mobility is not limited to using a single mode
of transportation for a trip. Instead, they may take their private
car to reach a park & ride facility, use public transit to get to
the city center and then continue their journey by e-scooter to
reach their destination. Other examples are car sharing or ride
sharing systems, which are operated by cars, but to the user
they appear much like a public transit mode. For multimodal
modeling these special requirements and framework condi-
tions need to be considered.

34 e-Guide to Transportation Modeling 35

How are
Spatial model structure: What are transport analysis zones

(TAZ)?
The core principle of aggregate models is the spatial dissection

aggregated
of the study area into travel analysis zones (TAZ). These zones
cover the study area and are often associated with statistical
units, such as communities and census tracts. Most inputs and
outputs are aggregated to these TAZ and can be prepared and
analyzed with GIS tools. Since TAZs are the core units of the

transportation
model computations, many outputs are generated in form of
square matrices. The rows are the origin zones, and the col-
umns are the destination zones.

models
Population segmentation

People have different travel patterns depending on their life
situation and other aspects. In 4-step-models, this is reflected
by segmentizing the total population of the TAZ into different

structured?
groups or “demand segments”. The number of segments and
the characteristics considered for the segmentation (e.g., age,
employment status, car availability) depend on model scope,
budget, and data availability. For each segment, individual
parameters for trip characteristics can then be applied in the
modeling steps.

Consideration of time – temporal scope


Most travel demand models are used for strategic considera-
tions. The planning horizon is in the range of years. So, it is
often sufficient to consider average daily traffic volumes. Thus,
many strategic models are designed to model traffic volumes
and trips per average day. As travel patterns tend to have a high
degree of temporal clustering, and because transportation in-
frastructure needs to be designed to meet peak demands, sep-
arate models for peak hour traffic estimates are often created.
If models are used for more operational studies, then a higher
temporal resolution of demand may be required.

36 e-Guide to Transportation Modeling 37

04 How to
skillfully build
a transportation
model?

38 e-Guide to Transportation Modeling 39

Developing, maintaining,
and applying a transport model
For strategic transportation planning there is a relatively clear distinc-
tion between model development and model application.
Data
Model development is the process to set up a base model which repro-
duces the mobility in the planning regions at a given time (the base
year). This model is built from various data sources, which all should
relate to the base year. By adjusting various parameters and inputs,
the model is calibrated to match traffic counts and various survey data,
such as vehicle counts, public transit passenger boardings, trip dis-
tance distributions. Those are also collected for the base model. Due
to these data and calibration requirements, the base year of the mod-
el will often be an earlier year than the actual year when the model is
developed.

Once calibrated and approved, this base (year) model can then be used
Model
in many different applications to develop projects and test scenarios. Creation
This model may then be handed to different agencies or consultants
for their project studies.

As the transport system evolves over time, also the base model needs
to be maintained and updated to accurately represent the model re-
gion. Bigger updates to the model will usually also require a recalibra-
tion. The frequency of such updates depends on the scope of mobility
changes in the region and the project timeline and budget.

Data
Visualization

40 e-Guide to Transportation Modeling 41

How are transportation models built? Observed control data

Although they are not needed for the model calculation itself,
control datasets are important for the model calibration pro-
Data cess. These can be observed traffic volumes from manual or
For setting up transportation models, existing datasets are processed automated vehicle counts, transit passenger counts from auto-
and combined wherever possible. In general, several different types of mated count systems or ticketing systems, or similar. Observed
input data are required to build a model. distributions - of actual trip distances, travel times, etc. - are
also useful for calibrating demand models and often come
Transportation networks and supply data
 from household travel surveys or Big Data.
Transportation networks form the base for any transportation
model. Road networks can be extracted from navigation data-
bases or from GIS datasets. Some processing may be required
to provide essential attributes specific to transportation mod-
els, such as capacity. Public transit networks and timetables are
often available in common formats such as GTFS from sched-
uling systems. Other networks – for cycling, sea, or air traffic
– may be available from GIS datasets or other online sources.
Although not required for most calculations, its best if the mod-
al networks can be merged into a single multi-modal network.
This enables multimodal analysis and consideration of interac-
tions between modes.

Land use, demographic, and economic data



Land use data, demographic variables, and other data are
needed to assess the origins and destination of travel demand.
Much of this data is available from census data and land use
monitoring in databases or GIS formats. For aggregated mod-
els, this information is usually condensed to the TAZ level, while
ABM models preserve the individual activity locations, house-
hold locations and synthetic population.

Travel behavior parameters


Most calculations in the transportation modeling process – re-
gardless of the model type – are based on parameters describ-
ing human travel behavior. These parameters can be estimated
from household travel diary surveys or estimated by statistical
methods from other datasets such as mobile phone data.

42 e-Guide to Transportation Modeling 43

 Transport modeling success story

Abu Dhabi creates a public

transport system from scratch
In 2008, the Abu Dhabi’s Department of Transport (DoT) launched
The Public Bus Transportation Service, aiming to create an integrat-
ed world-class public transport network. The bus network now carries
over 50 million annual passengers in the Emirate.

Setting up a public transport system in a culture dominated by cars

was a specific challenge. Overcoming it involves not only installing a
new mode of transport, but also convincing the population to change
their travel habits.

To analyze if the planned network would be sufficient for the expected

travel demand, a Bus Planning Model was created using PTV Visum.
PTV Visum considers all road users and their interactions and is used
as standard in transport planning.

Using the PTV Visum transport model, DoT can now:

Plan and evaluate the network

Plan timetables, based on realistic runtime profiles

Estimate line blocking and number of required vehicles

Connect with other solutions - scheduling software,

automated fare collection system, etc.

With PTV Visum, DoT planners incorporate passenger volumes from

automatic fare collection system and runtimes directly into the net-
work, to support bus planning. This has helped to streamline DoT’s
planning process and allowed implementation of a twice-yearly net-
work planning cycle.

44 e-Guide to Transportation Modeling 45

Model calibration How are transportation
To be used as a planning tool, trans-
portation models must achieve an ac-
models analyzed?
curate replication of travel patterns in
the base year. Only thereby can future Outputs and results
scenarios be assessed in a meaningful
way. To achieve this, model results are Transport models provide various results on different levels of detail
compared to observed data, usually at and segmentation.
least vehicle counts, public transport The most frequently used outputs are traffic volumes for different
passenger counts and/or trip distance modes of transport on the links. These provide direct insights into local
and travel time distributions. traffic impacts, for example noise and levels of emissions. For public
Based on these comparisons, model pa- transit planning, comparable outputs are volumes on transit lines or
rameters and other aspects are adjust- individual services, or boarding, alighting, and transferring at individ-
ed until the calibration requirements ual stops. The assignments generate full paths from trip origin to trip
are met: A maximal deviation of 5% at destination through the network, along with the respective volumes.
85% of the count locations. This allows for detailed analysis of which travelers use each link. It is
helpful, for example, when planning roadworks and bypasses.
Calibration is often a time-consuming
process, requiring expert knowledge For more comprehensive scenario assessments, a multitude of global
and experience. Several automated pro- KPIs can be provided for the full network, or for subsections like cer-
cedures can be applied to automatically tain relations or destinations. For studies regarding decarbonization,
adjust model components to match ob- this can be metrics such as total mileage or congestion length. For
served counts. For example, by adding transit studies, KPIs like total ridership, average travel time or number
constants to utility functions or by auto- of transfers, estimated fare revenues, operating cost are provided. The
mated a posteriori matrix adjustment. various network skim matrices generated during the model compu-
While speeding up the calibration pro- tation provide valuable insights on issues related to accessibility and
cess, these methods can have issues re- connectivity
garding model expressiveness and can
lead to model overfitting.
Tools to analyze transport model outputs
Many of the outputs produced by transportation models can easily be
analyzed in tables, charts, or GIS maps. For visualizing link volumes, 2D
or 3D bar maps are a popular rendering.

46 e-Guide to Transportation Modeling 47

The richness and structure of outputs from transportation models al-
lows for much more sophisticated analysis. Several of the numerous
tools are described below:

One of the most important tools is the “flow bundle” or “select

link” analysis. This tool extracts all the paths traversing selected
network elements. Analysts can assess which travelers will be af-
fected by changes to these elements.

Isochrone calculations provide insights to accessibility based


on detailed information on travel times and network connectiv-
ity contained in a transport model.

The information captured in network skim matrices and trip

demand matrices can be visualized and aggregated to identify
demand flows and overall travel patterns.

The time profiles of activities at selected locations can be inves-

tigated, for example the charging of electric vehicles at charg-
ing facilities or the presence of visitors at a shopping center.

Crowding profiles and transfer locations of transit lines or sig-


nalization coordination in green bands can be analyzed in spe-
cialized time-space diagrams.

48 e-Guide to Transportation Modeling 49

05 Achieving
sustainability, safety,
and efficiency
in mobility

50 e-Guide to Transportation Modeling 51

Connecting transportation models long lead times. Therefore, implementing or adjusting such
services is usually not a short-term matter but requires prop-
to other plannings and applications er advance planning. In particular, the conversion of gasoline
bus fleets to e-bus fleets requires careful assessment of the dif-
Mobility is at the heart of human activity. That’s why transportation ferent operational concepts (overnight charging, opportunity
planning never stands alone. It is linked to many other urban planning charging, etc.) and the needed charging infrastructure. Trans-
activities and provides invaluable inputs to the respective processes portation models can be used to evaluate the fleet of vehicles
and tools. Some examples are: required to operate a planned service or to assess how differ-
ent types of vehicles will perform in the planned service.
Air quality assessment and climate change

Roadworks planning

Road traffic is responsible for a large share of carbon emissions
and other pollutants affecting air quality in cities. Many trans- When infrastructure needs to be maintained or replaced, or
portation planning projects therefore aim to reduce those emis- other roadworks affect the available road capacity, transporta-
sions, e.g. by introducing Low Emission Zones in city centers. tion models help to assess the relocation of traffic flows and to
Transportation models compute the traffic volumes resulting ensure sufficient capacity and smooth operation on the alter-
from such measures, while also indicating unwanted side ef- nate routes.
fects like overall increases in trip lengths. The combination with Land use & energy grids

emission models enables planners, for example to assess dif-
When zoning systems and land use of a city or region are de-
ferent fleet compositions of electric and combustion engines.
signed, transportation systems need to be adjusted. Transpor-
Noise evaluations
 tation models play a major role to support this process. With

Like air quality, traffic volumes computed by transportation mod- the shift towards electric mobility, other parts of the urban
els can also feed into noise emission models. Based on detailed infrastructure such as the electric grid also may need adjust-
models of the built-up environment, planners can assess the ment. Transportation models provide key insights for helping
noise exposure and possible reductions with dedicated tools. to dimension these assets.

Accessibility and equity

 Road safety

Access to different types of services like health care, education, Road safety plays a major role in providing livable cities. Trans-
or groceries is strongly dependent on transportation – while portation models can help in identifying and analyzing accident
not all mobility alternatives are equally suitable for all people. hot spots and designing network alternatives for mitigation.
The detailed representation of all modes and the segmentation
of transportation models for different population types allow
concise planning for equity in service provisioning.

Public transit, rail and ride sharing fleet planning


The procurement of vehicles for public transit, rail services or
ride sharing offers requires huge financial investments and has

52 e-Guide to Transportation Modeling 53

 Transport modeling success story

Preparing EV charging
infrastructure
The need to plan for a future dominated by electric vehicles (EV) is
pressing. In northwest England, PTV Group, together with other stake-
holders, used PTV Visum to develop a detailed transport model for EV
charging requirements.

Using PTV Visum, the demand for charging has been quantified, to un-
derstand where and when EV are likely to charge.

Prior to building the model, scenarios were developed to explore the

uncertainties around the EV market, such as electricity demand and
infrastructure needs. But rather than providing a single outlook, the
scenario results highlight a range of plausible outcomes up until the
year 2050, allowing for robust analysis and decision-making.

The project tackled another critical issue: The capacity of the electric-
ity networks. Overlaying the transport model with electricity capacity
data made it possible to estimate how the charging demand will affect
the power network.

Using the data from the PTV Visum model, a free online tool was devel-
oped. It provides planners, local authorities, and charging point install-
ers with data to explore where public charging points will be needed,
and where connections to the grid can be made.

Authorities in the region can now better plan and coordinate the roll-
out of charging infrastructure by understanding drivers’ needs

54 e-Guide to Transportation Modeling 55

Transportation modeling with
PTV Group technology
PTV Visum

The world’s leading transport planning software. It is the stand-
ard for macroscopic simulations and macroscopic modeling of
transport networks and transport demand, public transport
planning, and for the development of transport strategies and
solutions. With PTV Visum, you create transportation mod-
els that provide insights for long-term strategic planning and
short-term operational use. 

PTV Model2Go

The ground-breaking new technology in the field of city and
transport planning, delivers a ready-to-use model for any city in
just one week. Automatically, fast, and cost-efficient. Model2Go
reduces the time and resources needed to set-up a transport
model and enables transport planners to focus on what mat-
ters – improving mobility in cities.

PTV Vissim

The world’s leading multimodal traffic simulation software. PTV
Vissim digitally reproduces the traffic patterns of all road users.
Trusted by traffic planners and engineers, PTV Vissim evaluates
and improves the performance of your traffic facilities.

PTV Visum Publisher


Tell your mobility story with attractive visualizations. PTV Visum
Publisher provides personalized cloud-based dashboards from
PTV Visum data. Use it to tell your mobility story with clear vis-
ualizations during your presentations and meetings.

Want to transform your transportation modeling?

Contact Us Form
Contact the PTV expert team!