Transvac TransPAC

TransPAC Carbon Dosing Solutions
About Us
Transvac Systems Limited is a privately owned Ejector Solutions provider formed
in 1973.
As both a designer and a manufacturer of Ejectors, Transvac has full in-

house control over process and mechanical design, supply of raw materials,
manufacturing, scheduling and testing. With all of our procedures certified to BS
EN ISO 9001:2015 the quality of the final product is assured.
Transvac is accredited to Module H of the Annexe III Pressure Equipment

Directive (PED) and our products are CE marked where appropriate. We are also
1st Point Assessment (FPAL) and Achilles registered.
All products are custom designed to suit the process and mechanical
requirements of each application to ensure maximum operating efficiency.
Transvac offers standard and exotic materials of construction including Hastelloy,

Duplex, Super Duplex, Titanium etc.
TransPAC The Complete Carbon Dosing Solution
Powdered Activated Carbon (PAC) is a primary form Transvac PAC dosing systems are available as
of treatment for pesticides and organics removal. It fully containerised or skid mounted packages.
is often added to drinking water supplies to remove Containerised systems are available for purchase or
pesticides (such as Metaldehyde) and herbicides, and low cost rental.
to neutalise the causes of taste and odour complaints,
to ensure current legislation requirements are met. A TransPAC offers outstanding value as it can be
taken from site to site as required, which is ideal for
Traditional PAC dosing methods incorporating treating seasonal issues such as algae bloom, taste &
mechanical agitators, tanks and slurry pumps have odour, chemical spills or pesticide contamination.
proved to be unreliable and ultimately very costly.
TransPAC systems are designed and built at our site
Transvac offer a variety of simple & reliable PAC dosing in Derbyshire, with a full range of performance testing
systems, using our Ejectors as the key element. carried out on every system we build.
No capital expenditure required

i Short & long term rental options
Competitive hire rates
Fast-track solution for failing works
Clients include:
3
TransPAC - a complete
PAC dosing solution
When water standards slip, you need to act fast. The TransPAC dosing solution puts
you back in control.
With minimal need for building or groundworks, TransPAC provides a safe and secure
home for your dosing solution. Simply hook it up and away you go.
TransPAC provides once-through inline dosing, so there are no batch mixing tanks to
contend with and the fully programmable HMI control panel provides accurate and
efficient dosing. After all, no one likes wastage.
The TransPAC is also supplied with a silo adapter kit which can be easily fitted by the
site operator to enable the system to receive carbon from a site silo, rather than a
bulk bag.
A Containerised TransPAC
Dosing System Includes
Secure, vandal-proof container with lighting
Transvac PAC Ejector, in-line wet mixing / pumping system
Powder handling / metering system (bulk bag or silo fed option)
Clean water pressure booster pumps
Water header tank
Site specific control panel with alarm interface
Interconnecting pipework and valves (manual or automated)
Instrumentation
Optional compressor
Silo feed adapter kit
Optional dust extraction system
Improved hydraulic bag clamping arrangement to eliminate dust
Performance tested prior to delivery

5
Advantages of a TransPAC
Dosing System
PAC dose rate to match works flow
Accurate dosing, no PAC wastage
Clean and reliable operation
Once through in-line mixing
Dosing lines flushed clean after use
No wet mixing moving parts
Minimal maintenance
Simple to install and operate, minimal civil

works required
Hygienic design
Manual or fully automatic operation
Compatible with site telemetry
Containers can be moved from site to site as

required
No requirement to involve M & E contractors
6
• Buy or hire options i
• Competitive monthly hire rates
• Plug in and start dosing!
• Fast-track solution for failing works
• Bulk-bag or silo feed
7
Silos
Transvac regularly work with silo providers to enable
silo fed PAC dosing systems. These can be coupled
with our mobile TransPAC systems or with our fixed skid
packages and can incorporate a varying range of silo
arrangements and sizes.
Our latest TransPAC designs allow for both silo and bulk
bag feed as standard and can be interchanged with
minimal modifications to the system.
Case Studies
Client Yorkshire Water
Issue Taste & Odour Issue
Flowrate 3kg/hr – 60kg/hr
Product Provided Fully containerised TransPAC system
Preferred Dosing Method Bulk-Bags
Client Welsh Water
Issue Spike in pesticide concentration

Fully containerised TransPAC system
Product Provided complete with free standing dust
extraction unit.
Preferred Dosing Method Silo
Client Yorkshire Water
Issue Taste & Odour Issue
Product Provided Fully containerised TransPAC system
Preferred Dosing Method Silo

Dosing Skid Packages
For installation of a PAC system inside an existing building, Transvac skid packages
can be tailor made to match the individual site needs.
uu Automatic or manual controls

uu Booster pumps
uu Washdown loop
uu Header tanks available (WRAS approved)
uu Duty standby systems available
uu Flexible layout
uu “Plug & Play” installation
uu Hygienic
uu Compatible with bulk-bag or silo systems
Isolator Hoods
Manual addition systems are designed to minimise exposure to dust and
contamination to clean areas with an isolation hood with port for extraction and
glove ports for operators.
uu Compatible with 25kg bags

uu Hygienic polished finish
uu Tri-clamp connections
uu Protection for operators
uu Quick & efficient dosing
9
Research & Development Test Facility
Transvac officially opened its R&D Test facility in April equipment for handling water, gas, multi-phase and
2010. The state-of-the-art test facility primarily develops slurry. Test programmes are supported by CFD studies
new oil & gas Ejector technology for subsea processing, and include fundamental University research.
flare gas recovery, sand slurry pumping and production
boosting. The Transvac facilities include liquid flow lines for
high, medium & low pressure testing (in excess of 250
Ejector applications for the nuclear, bio-fuel, chemical bar (g)) and solids handling systems.
and wastewater industries are also under development.
Transvac performs functional validation tests for Ejectors
The R&D test facility includes high and low pressure used in the oil & gas, nuclear and process industries.
i Why not visit Transvac head office and come

and see the first-class R&D facility for yourself?
10
Research & Development - Key Research Areas
Fluid Stucture Interaction Low energy inline micro bubble generation
uu Jet break up characterisation uu Optimisation of new equipment and envelope

uu Coalescing and dispersion of multiphase flows testing
uu Measurement techniques [laser Doppler]
uu CFD model calibration [new code development] Gas Motivate Liquid Units
uu Optimisation and stabilisation studies

High Motive Pressure Liquid Jet
Compressor Liquid Jet Pump Erosion Prediction
uu Optimisation & characterisation
Techniques
uu Scaled trials
uu Micro scale experimental trials
uu CFD model calibration
uu CFD modelling and calibration
uu Full scale Ejector testing
uu Accelerated testing methods
R&D clients include:
ejector solutions
1
Contact Us
Transvac Systems Ltd. Monsal House, 1 Bramble Way, Alfreton, Derbyshire, DE55 4RH, UK
Tel: +44 (0) 1773 831100 | Email: [email protected] | Web: www.transvac.co.uk
How to promote your BSI certification

Guidelines for clients | 2022
1.2 Where can I use the BSI Mark

1.0 Overview
1 1 How to use the
marketing logo?
BSI Mark of Trust
The table below shows where each of of the BSI Mark of Trust mar
1 2 Where can I use the
BSI Mark of Trust?
1 3 Accessing your Mark of Trust
Carbon ISO 9001
logos Monoxide Quality
Management
Alarms Systems
2.0 Kitemark™ (product logo)
2.1 Kitemark™ (marketing logo) Can I use the BSI Mark
BSI “KITEMARK” BSI “CERTIFIED” BSI “VER
3.0 Management systems of Trust on... marketing logo marketing logo marketin
3.1 HACCP & GMP certification

Transvac TransPAC

Uploaded by

Copyright:

Available Formats

Transvac TransPAC

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Transvac TransPAC

Uploaded by

Copyright:

Available Formats

TransPAC Carbon Dosing Solutions

As both a designer and a manufacturer of Ejectors, Transvac has full in-

Transvac is accredited to Module H of the Annexe III Pressure Equipment

Transvac offers standard and exotic materials of construction including Hastelloy,

No capital expenditure required

Transvac PAC Ejector, in-line wet mixing / pumping system

Powder handling / metering system (bulk bag or silo fed option)

Clean water pressure booster pumps

Water header tank

Site specific control panel with alarm interface

Interconnecting pipework and valves (manual or automated)

Silo feed adapter kit

Optional dust extraction system

Improved hydraulic bag clamping arrangement to eliminate dust

Performance tested prior to delivery

PAC dose rate to match works flow

Accurate dosing, no PAC wastage

Clean and reliable operation

Once through in-line mixing

Dosing lines flushed clean after use

No wet mixing moving parts

Simple to install and operate, minimal civil

Manual or fully automatic operation

Compatible with site telemetry

Containers can be moved from site to site as

No requirement to involve M & E contractors

Issue Taste & Odour Issue

Flowrate 3kg/hr – 60kg/hr

Product Provided Fully containerised TransPAC system

Preferred Dosing Method Bulk-Bags

Client Welsh Water

Issue Spike in pesticide concentration

Flowrate 1kg/hr – 10kg/hr

Preferred Dosing Method Silo

Client Yorkshire Water

Issue Taste & Odour Issue

Flowrate 5kg/hr – 95kg/hr

Product Provided Fully containerised TransPAC system

Preferred Dosing Method Silo

uu Automatic or manual controls

uu Compatible with 25kg bags

i Why not visit Transvac head office and come

uu Jet break up characterisation uu Optimisation of new equipment and envelope

uu Optimisation and stabilisation studies

How to promote your BSI certification

1.2 Where can I use the BSI Mark

You might also like