2022.10.28 3 Phase Decanter Centrifuge

3 Phase Decanter Centrifuge
（Solids/Liquid/Liquid Separation）
28/Oct/2022
Decanter Centrifuge
3 Phase Separation
Introduction
GN 3 phase decanter centrifuge is mainly designed for
Solid-liquid-liquid three-phase separation of materials.
With our over 10 years of experience in the separation
industry, it is the advanced type machine for 3 phase
separation. It is designed for 24 hours continuous and
smooth operation throughout the day. It is mainly
composed of driving system, decanter bowl, screw
conveyor inside the bowl, cover box, skid and VFD
control panel.
To ensure that the separation process can take place,

the solid phase must be the specifically heaviest phase
and the two liquid phases must have different densities.
The main difference between the 2 phase decanter and
3 phase decanter is that the 3 phase decanter not only
separate the solids but also separate two phase of the
liquid.
GN 3 phase decanter is widely used for oil , water,

solids separation industry.
2
www.gnseparation.com
3 Phase Decanter
Working Principle
The three-phase decanter centrifuge operation is based on the principle of sedimentation, that is, solid particles with specific liquid
weight precipitate in a predetermined time. This principle can also be applied to two immiscible liquids with different specific gravity.
When the material enters the high-speed rotating drum, the material rotates synchronously with the drum. Because of the different
specific gravity, the centrifugal force is different. The solid particles with the larger specific gravity are subjected to the greatest
centrifugal force, followed by the heavy phase liquid (such as water) and the light phase liquid (such as oil). So the centrifugal force is
becoming less from outside to inside according to the magnitude of centrifugal force. A concentric solid layer and two liquid layers are
formed. Solids are pushed out by the screw conveyor, and liquids are removed from their respective nozzles. Therefore, the application
of three-phase decanter centrifuge can not only separate the solid in the material, but also separate the two-phase liquid with different
specific gravity in the material, that is, Solid-liquid-liquid separation can be achieved.
3
Specifications
3 Phase Decanter
Model GNLWS-364 GNLWS-454 GNLWS-554
Type Solids Liquid Liquid Separation
Bowl Dia 360mm 450mm 550mm
Bowl Length 1567mm 1947mm 2347mm
Capacity 5 m3/h 10 m3/h 15m3/h
Max Speed 4000 RPM 3600 RPM 3000 RPM
Max G Force 3225 G 3265 G 2772 G
Diff. Speed 0-30 RPM 0-30 RPM 0-30 RPM
Main Drive 30 KW/22KW 45KW/37 KW 75KW/55KW
Back Drive 7.5KW 15 KW/11KW 18.5KW/22KW
Lubrication Grease type Grease Type Oil Lubrication
Oil Pump Size N/A N/A 0.37 KW

Feed Material Solids Less 10% and Particle Size less than 2mm
4
Bowl Assembly
Features
• Bowl Material: Duplex Stainless Steel SS2205 • Screw Conveyor Material: Duplex Stainless Steel SS2205
• Solids Discharge port: Tungsten Carbide insert • Material Distribution Nozzle: : Tungsten Carbide insert
• Screw Conveyor Wear Protection: Tungsten Carbide Tiles

• Bearing: SKF or Japan NSK Brand
• Differential Speed: Adjustable according to conditions
• Gearbox type: planetary wheel type
• Bearing: SKF or Japan NSK Brand
5
3 Phase Decanter
Adjustable Separation
Flexible for different Liquid Phase Proportion
An adjustable impeller discharges the "heavy" liquid phase. Furthermore, the operator can use
the adjustable impeller to adjust the pond depth of the heavy liquid without difficulty during
ongoing operation. According to the Proportion of two different phase, An adjustment
mechanism causes the position of the impeller to change, thus changing the separation line of
the liquids. The process engineering results can thus be influenced so as to achieve the
required separation result.
6
Decanter Centrifuge
3 Phase Separation
Bearing Lubrication System

Planetary Gear Box 1.Grease lubrication is selected for small models, which can be
1. The planetary gear box is of large equipped with automatic grease injection lubrication system. SKF High End Brand Bearing
transmission torque, small size, stable 2. The lubricating system of thin oil circulating oil station is 1. Excellent stability and long service life.
operation and convenient maintenance. adopted for large models, which can meet the requirements of 2. Convenient for users to find and replace
2. The differential speed ratio can be heavy load and high speed operation. The effect of thin oil spare parts.
selected according to different materials. circulation lubrication on the cleaning and cooling of bearings is
obvious, which greatly improves the service life of bearings.
7
Decanter Centrifuge
3 Phase Separation
Famous brand electric components Automation and intelligence

Stainless Steel VFD Control Panel 1.VFD from Yaskawa, ABB or Siemens series. 1. The Constant Torque control system can be realized
2. PLC and touch screen from Siemens or other according to the demand.
1.Excellent corrosion resistance and long service
life. famous brands. 2. The complete monitoring and alarm system can meet the
3. Circuit breakers and other components from requirements of bearing temperature rise protection, vibration
2. Minimum IP55 protection level meets outdoor
Schneider or other famous. monitoring and protection, overload protection, etc.
use demand.
4. Common DC (Direct Current) bus energy feedback 3. Control and display bowl speed and differential speed.
3.The positive pressurized explosion-proof control
braking is adopted to achieve the purpose of energy Monitor the current of main motor and back motor.
panel can be made according to requirement.
saving 4. Automatic flushing and dosing control can be equipped
according to customer requirements
8
Decanter Centrifuge
3 Phase Separation
Bearing Seat Processing Screw Processing

Bowl Processing The special processing tooling for bearing seat is The special processing tooling for processing
The centrifugal casting bowl is processed by high- made to ensure that the processing of bearing seat the screw is made to ensure that the shaft
precision CNC lathe to ensure the concentricity of bottom surface, bearing seat hole and bearing seat holes at both ends of the screw can be
end surface can be completed one-time installed in
inside & outside of the bowl and the bearing positions processed once installed in the CNC
CNC machining center. And the parallelism between
at both ends. bearing seat bottom surface and bearing seat hole,
machining center, and the rotary concentric
as well as the vertical accuracy of bearing seat hole accuracy of the screw is strictly guaranteed.
and bearing seat end surface can be strictly
guaranteed.
9
Facilities
No. 1 Factory: Headquarter Office No. 2 Factory: Centrifuge & Pumps Manufacture
Facilities
Pump & Centrifuges Workshop
Facilities
Fabrication & Coating
Laser Cutting Plasma cutting Ball Blasting and Paint
Welding
Powder Coating Warehouse & Stock
Facilities
GN America Company
Contact
GN Branches
China Headquarters USA Branch Russia Branch
Hebei GN Separation & Conveying GN Solids America LLC

GN Solids Russia
Equipment Co., Ltd
• Email: [email protected]
• Email: [email protected]
• Email: [email protected] Web: www.gnsolidsamerica.com
• Web: www.gnsolidscontrol.ru
• Web: www.gnseparation.com Tel: +1-713-8780880
• Tel: +7 925 304 25 70
• Tel: +86-316-5276988 • Fax:+1-832-288-5917
• Address: г.Москва.Радонежского
• Fax: +86-316-5276990 • Address: 6710 Windfern Road,
Сергия ул.
• Add: No. 1 Zhongxun Road, Houston, TX 77040, USA
Dachang Chaobai River Industry
Zone, Langfang, China
• Location: 40km to Beijing
International Airport
14

2022.10.28 3 Phase Decanter Centrifuge

Uploaded by

Copyright:

Available Formats

2022.10.28 3 Phase Decanter Centrifuge

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2022.10.28 3 Phase Decanter Centrifuge

Uploaded by

Copyright:

Available Formats

3 Phase Decanter Centrifuge

To ensure that the separation process can take place,

GN 3 phase decanter is widely used for oil , water,

Oil Pump Size N/A N/A 0.37 KW

• Screw Conveyor Wear Protection: Tungsten Carbide Tiles

Flexible for different Liquid Phase Proportion

Bearing Lubrication System

Famous brand electric components Automation and intelligence

Bearing Seat Processing Screw Processing

Laser Cutting Plasma cutting Ball Blasting and Paint

China Headquarters USA Branch Russia Branch

Hebei GN Separation & Conveying GN Solids America LLC

You might also like