Base 2/08

Base 2/08
HALFEN-DEHA also encloses details of its large product range with this price list. Products are divided into categories;
CONCRETE, FACADE and FRAMING SYSTEMS.
Every single product comes with the quality and technical know-how of a well-known brand.
The HALFEN, DEHA, FRIMEDA and DEMU brands have the right system for every fastening problem imaginable –
user-focused solutions to problems with highly technical requirements that satisfy the highest possible standards
of quality and safety.
Ordering example
Item name Article no.
0001.020-
FV = hot-dip galvanised
HTA 38/17 - FV -100 - Vf 03001
HTA 38/17 - FV -150 - Vf 03002
0001.020-03004 = Your article no.
HTA 38/17 - FV -200 - Vf 03003
Item wanted: HTA 38/17 - FV -250 - Vf 03004
HTA 38/17 - FV -300 - Vf 03005
Explanation of Abbreviations
hot dip galvanised. Short and cut lengths are galvanised after cutting, so that thre is an overall
fv corrosion protection.
wb mill finish (without corrosion protection)
gv electro plated
A4
and stainless steel
A2
HCR high corrosion resistance stainless steel
Vf Polystyrene Bead Filler (Material: Polystyrene)
Kf Combination Strip Filler (Material: Polyethylene)
KS Plastic
All deliveries are made in accordance with our 'General terms and conditions of business' .
Other important information relating to the details provided in this price list are as follows:
When using our materials, please observe the installation manual or the relevant usage instructions provided in our technical or
user´s manual.
We reserve the right to price changes, mistakes and technical modifications.

The quality management system deployed by Halfen GmbH is
DIN EN ISO 9001:2000, certified for the sites in Germany, Switzerland and Poland, with certificate no. QS-218 HH.
PRICE LIST 2008
Index
1 Concrete connection systems

page 6 - 14 HALFEN cast-in channels, HTA, HZA, DYNAGRIP, HGB
15 Cast-in channels HTU
15 HALFEN HKW corner guards
16 - 18 Sockets / inserts / Headed Studs
2 Reinforcement systems
Environmental products
page 20 - 27 HIT balcony connections
38 - 41 HBB, HTF, HTT impact sound insulation
Reinforcement couplers
page 28 - 32 HBS-05 threaded connectors
33 HGC grip connector
34 HBT rebend connection
Reinforcement technology
page 35 - 37 HDB shear reinforcement
42 - 43 HCC column shoe
41 - 42 Spacer system
45 Stud Connector HSC
46 - 47 Schubdorn HSD
3 Lif ting systems

Quick-clutch systems
page 50 - 57 DEHA KKT transport anchor system
58 - 63 FRIMEDA TPA transport anchor system
Threaded lifting systems

64 - 66 HD-anchor
67 - 70 HA socket anchor
4 Façade connection systems

Concrete façade connections
page 72 - 74 FPA pre-cast panel anchor
75 - 77 BRA, WPA parapet corbels
78 - 84 DS, HKZ, WDI, WDK, SPV, HFV horizontal anchors
84 - 85 SPA wire sandwich panel anchor
86 - 87 MVA sleeve sandwich panel anchor
Brickwork support systems

page 88 - 100 HK4 brickwork support
HW, KW, KWL support angles
HK4-S, HSL, FSW pre-cast lintel connection components
LSA, HEA, HPV brick ties
HMS, HAV, ML, JF brickwork support system-accessories
HGA rack anchor
Natural stone systems

page 101 - 106 BA, DA, HRM, HRC body anchors
UMA, UHA grout-in stone anchors
GE, HGA, NAS-LW stone support systems-accessories
3
PRICE LIST 2008
Index
5 Tension rod systems

page 108 - 111 DETAN tension rod system S460
DETAN stainless steel tension rod systems
DETAN accessories
6 Framing systems
page 114 - 119 HM, HL, HZM, HZL framing channels
120 DGM, SDM rubber insulation for pipe clamps
121 - 126 HVT connection parts
127 - 128 KON brackets
129 - 134 Pipe clamps HRS, HCS, HRG
7 Bolts, accessories
page 136 - 141 HALFEN HS HZS T-head bolts
141 - 144 GWP, MU, US, GWS locking nut, threaded rods and hex-head nuts
145 - 146 SIC, VBM, KUS, KLP safety accessories and sleeves
146 - 147 HJV, HNA, HSF timber fixing, ML, BL masonry tie anchor
148 LSA, HEA, HPV brick ties
149 - 155 Chemical anchor bolt systems
156 - 162 Mechanical heavy duty dowels
163 - 164 HCB concrete bolt
4
Anchoring Technology – HALFEN cast-in channels
Concrete connection systems

Features Benefits
connections Connections 1
can be easily and
precisely positioned
Hot-rolled channels available
Saves time
Reinforcement systems
High dynamic load capacity
No drilled holes needed in the concrete
Hot-rolled
t-rolled
t-rolled HALFEN HT
HTA
A for reliably supporting
2
HALFEN cast-in channels ar
aree particularly vital components ov over their
recommended for cases entire service
vice liv
lives
wheree dynamic loads occur
wher occur..
Lifting systems
3
No vibr
vibration, no dust or
noise, no damage to
r
reinforcement
Façade connection systems

Easy to install, reliable,
implementation, high load 4
capacit faster
capacity,
Select fr
from
om the HALFEN cast-in
channel pr
product line.
DETAN
5
Framing systems
6
Special additional features of the Particular benefits of the
HZA-Dynagrip
-Dynagrip ttype
ype HALFEN cast-in channel HALFEN cast-in channel ttype HZA
Toothed channel profile and

matching HALFEN T-bolts with
Bolts, accessories
toothing
Hot-rolled
t-r
t-rolled toothed
thed HALFEN
7
cast-in channels type HZA Ideal for dynamic loads
with toothed
thed HALFEN HZS
along the length of rails
bolts.
5
H A L F E N ca s t - i n channel s
H TA 7 2 / 4 8 H TA 7 2 / 4 9
HALFEN cast-in channel, HALFEN cast-in channel,

hot-rolled, officially approved
officially approved Z - 21.4 - 34
1 Z - 21.4 - 34
2
Item name Number of Article no. Price Item name Number of Article no. Price
Length [mm] anchors 0001.120- [EUR/item] Length [mm] anchors 0001.130- [EUR/item]
FV = hot-dip galvanised SS 316
HTA 72/48 - FV - 150 - Vf 2 00301 20.25 HTA 72/49 - A4 - 150 - Vf 2 00101 52.00
HTA 72/48 - FV - 200 - Vf 2 00302 22.65 HTA 72/49 - A4 - 200 - Vf 2 00102 62.40
HTA 72/48 - FV - 250 - Vf 2 00303 25.15 HTA 72/49 - A4 - 250 - Vf 2 00103 72.80
HTA 72/48 - FV - 300 - Vf 2 00304 27.55 HTA 72/49 - A4 - 300 - Vf 2 00104 83.30
Lifting systems
HTA 72/48 - FV - 350 - Vf 3 00305 35.25 HTA 72/49 - A4 - 350 - Vf 3 00105 95.70
3 HTA 72/48 - FV - 400 - Vf

HTA 72/48 - FV - 550 - Vf
3
3
00306
00307
37.70
47.00
HTA 72/49 - A4 - 400 - Vf
HTA 72/49 - A4 - 550 - Vf
3
3
00106
00107
110.25
142.45
HTA 72/48 - FV - 1050 - Vf 5 00308 84.60 HTA 72/49 - A4 - 1050 - Vf 5 00108 260.55
HTA 72/48 - FV - 6070 - Vf 25 00003 461.40
Item price per metre: 76.01 EUR/metre H TA 5 5 / 4 2
HTA 72/48 - FV - cut length - Vf HALFEN cast-in channel,
L > 1050 mm Price per metre: 76.01 EUR/metre hot-rolled,
Standard cut length surcharge: 10 % officially approved

Z - 21.4 - 34
H TA 7 2 / 4 8
4 HALFEN cast-in channel,
hot-rolled,
officially approved
Z - 21.4 - 34
DETAN
Item name Number of Article no. Price

5 Length [mm] anchors 0001.110- [EUR/item]
HTA 55/42 - FV - 6070 - Vf 25 00003 346.35
Other lengths available upon request
Item name Number of Article no. Price , See explanations on page 13.
Length [mm] anchors 0001.120- [EUR/item] Special cut length surcharge 20 % , see explanations on page 13.
SS 316
HTA 72/48 - A4 - 150 - Vf 83.10
Framing systems
2 00101
HTA 72/48 - A4 - 200 - Vf 2 00102 99.65
6 HTA 72/48 - A4 - 250 - Vf

HTA 72/48 - A4 - 300 - Vf
2
2
00103
00104
115.85
132.60
HTA 72/48 - A4 - 350 - Vf 3 00105 156.15
HTA 72/48 - A4 - 400 - Vf 3 00106 172.55
HTA 72/48 - A4 - 550 - Vf 3 00107 221.75
HTA 72/48 - A4 - 1050 - Vf 5 00108 400.80
HTA 72/48 - A4 - 6070 - Vf 25 00001 2,036.60
Item price per metre: 335.52 EUR/metre
Bolts, accessories
HTA 72/48 - A4 - cut length - Vf

L > 1050 mm Price per metre: 335.52 EUR/metre
7 Standard cut length surcharge: 10 %

H TA 5 2 / 3 4 H TA 5 4 / 3 3

Z - 21.4 - 34
1
Note:
Supplied with bolt anchors or welded anchors,
Delivery subject to confirmation, unless
otherwise specified at the time of order (see below)
Length [mm] anchors 0001.090- [EUR/item] Length [mm] anchors 0001.100- [EUR/item] 2
FV = hot-dip galvanised FV = hot-dip galvanised
HTA 52/34 - FV - 150 - Vf 2 00301 12.95 HTA 54/33 - FV - 150 - Vf 2 00301 12.40
HTA 52/34 - FV - 200 - Vf 2 00302 14.65 HTA 54/33 - FV - 200 - Vf 2 00302 14.00
HTA 52/34 - FV - 250 - Vf 2 00303 16.35 HTA 54/33 - FV - 250 - Vf 2 00303 15.55
HTA 52/34 - FV - 300 - Vf 2 00304 17.95 HTA 54/33 - FV - 300 - Vf 2 00304 17.20
HTA 52/34 - FV - 350 - Vf 3 00305 22.80 HTA 54/33 - FV - 350 - Vf 3 00305 21.75
HTA 52/34 - FV - 400 - Vf 3 00306 24.50 HTA 54/33 - FV - 400 - Vf 3 00306 23.20
Lifting systems
HTA 52/34 - FV - 550 - Vf 3 00307 30.30 HTA 54/33 - FV - 550 - Vf 3 00307 27.15
HTA 52/34 - FV - 1050 - Vf
HTA 52/34 - FV - 6070 - Vf
5
25
00308
00003
54.35
293.65
HTA 54/33 - FV - 1050 - Vf
HTA 54/33 - FV - 6070 - Vf
5
25
00308
00003
51.45
235.60
3
Item price per metre: 48.38 EUR/metre Item price per metre: 38.81 EUR/metre
HTA 52/34 - FV - cut length - Vf HTA 54/33 - FV - cut length - Vf
L > 1050 mm Price per metre: 48.38 EUR/metre L > 1050 mm Price per metre: 38.81 EUR/metre
Standard cut length surcharge: 10 % Standard cut length surcharge: 10 %

SS 316-anchor SS 316 = channel + anchor, stainless steel SS 316-anchor SS 316 = channel + anchor, stainless steel
HTA 52/34 - A4 - 150 - Vf - anch.A4 2 00101 41.40 HTA 54/33 - A4 - 150 - Vf 2 00101 33.80
HTA 52/34 - A4 - 300 - Vf - anch.A4 2 00104 68.05 HTA 54/33 - A4 - 300 - Vf 2 00104 56.30 4
HTA 52/34 - A4 - 6070 - Vf - anch.A4 25 00001 1,214.65 HTA 54/33 - A4 - 6070 - Vf 25 00001 818.60
Item price per metre: 200,11 EUR/metre Item price per metre: 134.86 EUR/metre
HTA 52/34 - A4 - cut length - Vf - anch.A4 HTA 54/33 - A4 - cut length - Vf - anch.A4
L > 1050 mm Price per metre: 200,11 EUR/metre L > 1050 mm Price per metre: 134.86 EUR/metre
DETAN
10 % Standard cut length surcharge: 10 %
Standard cut length surcharge:
, See explanations on page 13.
5
H TA 5 2 / 3 4 - Q Special cut length surcharge 20 % , see explanations on page 13.
HALFEN cast-in channel,
holt rolled, with Q welded anchors
officially approved
Z - 21.4 - 34
for dynamic loads
Framing systems

Length [mm]
anchors 0001.140- [EUR/item] 6
HTA 52/34 - Q - FV - 150 - Vf 2 00304 12.95
HTA 52/34 - Q - FV - 200 - Vf 2 00305 14.65
HTA 52/34 - Q - FV - 250 - Vf 2 00306 16.35
HTA 52/34 - Q - FV - 300 - Vf 2 00307 17.95
HTA 52/34 - Q - FV - 350 - Vf 3 00301 22.80
HTA 52/34 - Q - FV - 400 - Vf 3 00308 24.50
Bolts, accessories
HTA 52/34 - Q - FV - 550 - Vf 3 00309 30.30

HTA 52/34 - Q - FV - 1050 - Vf 5 00310 54.35
HTA 52/34 - Q - FV - 6070 - Vf 25 00003 293.65 7
HTA 52/34 - Q - cut length - Vf
Standard cut length surcharge: 10 %

H TA 5 0 / 3 0 H TA 4 9 / 3 0

1 Z - 21.4 - 34
1 bundle = 54 items 1 bundle = 54 items

2 HTA 50/30 - FV - 150 - Vf 2 00301 9.10 HTA 49/30 - FV - 150 - Vf 2 00301 8.00
HTA 50/30 - FV - 200 - Vf 2 00302 10.20 HTA 49/30 - FV - 200 - Vf 2 00302 8.65
HTA 50/30 - FV - 250 - Vf 2 00303 11.30 HTA 49/30 - FV - 250 - Vf 2 00303 9.25
HTA 50/30 - FV - 300 - Vf 2 00304 12.45 HTA 49/30 - FV - 300 - Vf 2 00304 9.95
HTA 50/30 - FV - 350 - Vf 3 00305 15.50 HTA 49/30 - FV - 350 - Vf 3 00305 13.00
HTA 50/30 - FV - 400 - Vf 3 00306 16.60 HTA 49/30 - FV - 400 - Vf 3 00306 13.80
HTA 50/30 - FV - 550 - Vf 3 00307 19.90 HTA 49/30 - FV - 550 - Vf 3 00307 15.85
HTA 50/30 - FV - 800 - Vf 4 00308 27.55 HTA 49/30 - FV - 1050 - Vf 5 00308 27.05
Lifting systems
HTA 50/30 - FV - 1050 - Vf 5 00309 35.20 HTA 49/30 - FV - 3050 - Vf 13 00309 76.55
3 HTA 50/30 - FV - 3050 - Vf

HTA 50/30 - FV - 6070 - Vf
13
25
00313
00003
92.25
177.60
HTA 49/30 - FV - 6070 - Vf
Item price per metre:
25 00003 146.15
24.08 EUR/metre
Item price per metre: 29.26 EUR/metre HTA 49/30 - FV - cut length - Vf
HTA 50/30 - FV - cut length - Vf L > 1050 mm Price per metre: 24.08 EUR/metre
L > 1050 mm Price per metre: 29.26 EUR/metre Standard cut length surcharge: 5.10 EUR/item
Standard cut length surcharge: 5.90 EUR/item
SS 316-anchor SS 316 = channel + anchor, stainless steel
SS 316-anchor SS 316 = channel + anchor, stainless steel HTA 49/30 - A4 - 150 - Vf - anch.A4 2 00101 21.20
HTA 50/30 - A4 - 150 - Vf - anch.A4 2 00101 29.35 HTA 49/30 - A4 - 200 - Vf - anch.A4 2 00102 24.70
4 HTA 50/30 - A4 - 250 - Vf - anch.A4
HTA 50/30 - A4 - 300 - Vf - anch.A4
2
2
00103
00104
43.10
50.10
HTA 49/30 - A4 - 300 - Vf - anch.A4
HTA 49/30 - A4 - 350 - Vf - anch.A4
2
3
00104
00105
33.05
40.15
DETAN
5 Standard cut length supplement: 10 % Standard cut length surcharge: 10 %
ENA HCR = channel + anchor, stainless steel

Stainless steel nail, size 28/65 HTA 49/30 - HCR - 6070 - Vf 25 00009 upon request
recommended for securing Other lengths available upon request
stainless steel HALFEN cast-in channels
, See explanations on page 13.
to timber formwork
Special cut length surcharge 20 % , see explanations on page 13.
Framing systems
Item name Article no. Price
6 SS 304 = stainless steel

0034.010- [EUR/100 items]
ENA 28/65 00001 28.60

Bolts, accessories

H TA 4 0 / 2 2 H TA 4 0 / 2 5

Z - 21.4 - 34
1
HTA 40/22 - FV - 150 - Vf 2 00302 6.75 HTA 40/25 - FV - 150 - Vf 2 00301 6.25
HTA 40/22 - FV - 200 - Vf 2 00303 7.50 HTA 40/25 - FV - 200 - Vf 2 00302 7.00
HTA 40/22 - FV - 250 - Vf 2 00305 8.20 HTA 40/25 - FV - 250 - Vf 2 00303 7.45 2
HTA 40/22 - FV - 300 - Vf 2 00306 9.00 HTA 40/25 - FV - 300 - Vf 2 00304 8.00
HTA 40/22 - FV - 350 - Vf 3 00307 11.55 HTA 40/25 - FV - 350 - Vf 3 00305 10.05
HTA 40/22 - FV - 400 - Vf 3 00308 12.35 HTA 40/25 - FV - 400 - Vf 3 00306 10.70
HTA 40/22 - FV - 550 - Vf 3 00311 14.40 HTA 40/25 - FV - 550 - Vf 3 00307 12.55
HTA 40/22 - FV - 800 - Vf 4 00312 19.85 HTA 40/25 - FV - 1050 - Vf 5 00308 21.95
HTA 40/22 - FV - 1050 - Vf 5 00313 25.25 HTA 40/25 - FV - 3050 - Vf 13 00309 58.10
HTA 40/22 - FV - 1300 - Vf 6 00314 30.35 HTA 40/25 - FV - 6070 - Vf 25 00003 110.60
Lifting systems
HTA 40/22 - FV - 1550 - Vf 7 00315 35.75 Item price per metre: 18.22 EUR/metre
HTA 40/22 - FV - 1800 - Vf
HTA 40/22 - FV - 2050 - Vf
8
9
00316
00317
41.10
46.45
HTA 40/25 - FV - cut length - Vf
3
HTA 40/22 - FV - 2300 - Vf 10 00318 51.80 Standard cut length surcharge: 4.30 EUR/item
HTA 40/22 - FV - 2550 - Vf 11 00319 57.10
HTA 40/22 - FV - 3050 - Vf 13 00320 67.80 SS 316-anchor SS 316 = channel + anchor, stainless steel
HTA 40/22 - FV - 6070 - Vf 25 00003 129.55 HTA 40/25 - A4 - 150 - Vf - anch.A4 2 00101 18.05
Item price per metre: 21.34 EUR/metre HTA 40/25 - A4 - 200 - Vf - anch.A4 2 00102 20.25

HTA 40/22 - FV - cut length - Vf HTA 40/25 - A4 - 250 - Vf - anch.A4 2 00103 23.95
L > 1050 mm Price per metre: 21.34 EUR/metre HTA 40/25 - A4 - 300 - Vf - anch.A4 2 00104 27.20
Standard cut length surcharge: 4.40 EUR/item HTA 40/25 - A4 - 350 - Vf - anch.A4 3 00105 32.35
H TA 4 0 / 2 2
HTA 40/25 - A4 - 400 - Vf - anch.A4
HTA 40/25 - A4 - 550 - Vf - anch.A4
3
3
00106
00107
35.45
45.30
4
Item name Number of Article no. Price HTA 40/25 - A4 - 1050 - Vf - anch.A4 5 00108 82.30
Length [mm] anchors 0001.040- [EUR/item] HTA 40/25 - A4 - 6070 - Vf - anch.A4 25 00001 435.05
SS 316-anchor SS 316 = channel + anchor, stainless steel Item price per metre: 71.51 EUR/metre
HTA 40/22 - A4 - 150 - Vf - anch.A4 2 00101 20.95 HTA 40/25 - A4 - cut length - Vf - anch.A4
HTA 40/22 - A4 - 200 - Vf - anch.A4 2 00102 24.90 L > 1050 mm Price per metre: 71.51 EUR/metre
HTA 40/22 - A4 - 250 - Vf - anch.A4 2 00103 29.35 Standard cut length supplement: 10 %
HTA 40/22 - A4 - 300 - Vf - anch.A4 2 00104 34.05
ANK-E
DETAN
HTA 40/22 - A4 - 350 - Vf - anch.A4 3 00105 40.95
HTA 40/22 - A4 - 400 - Vf - anch.A4 3 00106 45.45 End anchor for assembly at a later date on HALFEN cast-in channel cut parts, 5
HTA 40/22 - A4 - 550 - Vf - anch.A4 3 00107 58.85 officially approved Z - 21.4 - 34
HTA 40/22 - A4 - 1050 - Vf - anch.A4 5 00108 108.55 Assembly
HTA 40/22 - A4 - 6070 - Vf - anch.A4 25 00001 597.90 hex head bolt diagram
HTA 40/22 - A4 - cut length - Vf - anch.A4
Standard cut length surcharge: 10 % clamping
Framing systems
element
H TA - V 4 0 / 2 2
6
hot-rolled, suitable for
with shortened anchors Article no.
Item HALFEN cast-in PU Price
name channel [items] [EUR/item]
0031.010-
type HTA
Item name Number of Article no. Price ANK-E1-FV 28/15 25 00002 2.25
Bolts, accessories
Length [mm] anchors 0004.020- [EUR/item] ANK-E2-FV 38/17, 40/22, 40/25 25 00004 2.50
FV = hot-dip galvanised SS 316 = stainless steel
HTA-V 40/22 - FV - 6070 - Vf 25 00003 129.55 ANK-E1-A4 28/15 25 00001 5.55 7
Item price per metre: 21.34 EUR/metre ANK-E2-A4 38/17, 40/22, 40/25 25 00003 6.80
HTA-V 40/22 - FV - cut length - Vf , See explanations on page 13.
L > 1050 mm Price per metre: 21.34 EUR/metre Special cut length surcharge 20 % , see explanations on page 13.
Standard cut length surcharge: 10 % PU [items] = packaging nit [items]

H TA 3 8 / 17 H TA 2 8 / 15

officially approved officially approved
Z - 21.4 - 34 Z - 21.4 - 34
1
HTA 38/17 - FV - 100 - Vf 2 03001 4.85 HTA 28/15 - FV - 100 - Vf 2 03001 3.90
HTA 38/17 - FV - 150 - Vf 2 03002 5.35 HTA 28/15 - FV - 150 - Vf 2 03002 4.30
HTA 38/17 - FV - 200 - Vf 2 03003 5.85 HTA 28/15 - FV - 200 - Vf 2 03003 4.75
2 HTA 38/17 - FV - 250 - Vf 2 03004 6.25 HTA 28/15 - FV - 250 - Vf 2 03004 5.10
HTA 38/17 - FV - 300 - Vf 2 03005 7.10 HTA 28/15 - FV - 300 - Vf 2 03005 5.40
HTA 38/17 - FV - 350 - Vf 3 03006 10.30 HTA 28/15 - FV - 350 - Vf 3 03006 8.55
HTA 38/17 - FV - 400 - Vf 3 03007 10.70 HTA 28/15 - FV - 400 - Vf 3 03007 8.85
HTA 38/17 - FV - 550 - Vf 3 03008 12.00 HTA 28/15 - FV - 550 - Vf 3 03008 9.70
HTA 38/17 - FV - 1050 - Vf 5 03010 20.25 HTA 28/15 - FV - 1050 - Vf 5 03010 16.10
HTA 38/17 - FV - 3050 - Vf 13 03011 49.85 HTA 28/15 - FV - 3050 - Vf 13 03011 37.45
HTA 38/17 - FV - 6070 - Vf 25 00003 94.75 HTA 28/15 - FV - 6070 - Vf 25 00003 70.95
Lifting systems
3 HTA 38/17 - FV - cut length - Vf

HTA 28/15 - FV - cut length - Vf
Standard cut length surcharge: 3.60 EUR/item Standard cut length surcharge: 3.15 EUR/item
SS 316-anchor SS 316 = channel + anchor, stainless steel SS 316-anchor SS 316 = channel + anchor, stainless steel
4 HTA 38/17 - A4 - 350 - Vf - anch.A4
HTA 38/17 - A4 - 400 - Vf - anch.A4
3
3
01006
01007
27.55
29.75
HTA 28/15 - A4 - 350 - Vf - anch.A4
HTA 28/15 - A4 - 400 - Vf - anch.A4
3
3
01006
01007
20.50
21.90
10 %
DETAN
Standard cut length surcharge: Standard cut length surcharge: 10 %

5
HCR = channel + anchor, stainless steel HCR = channel + anchor, stainless steel
HTA 38/17 - HCR - 6070 - Vf 25 00009 1.227,25 HTA 28/15 - HCR - 6070 - Vf 25 00009 781.70
Other lengths available upon request Other lengths available upon request
K-SS 316-anchor SS 136 = reduced anchor distance ≤ 200 mm, channel and H TA - V 3 8 / 17
anchor, stainless steel HALFEN cast-in channel,
0001.030-
Framing systems
with shortened anchors

HTA 38/17 -K - A4 - 250 - Vf - anch.A4 3 00101 23.15
6 HTA 38/17 -K - A4 - 300 - Vf - anch.A4

HTA 38/17 -K - A4 - 550 - Vf - anch.A4
3
4
00102
00103
25.15
41.40
HTA 38/17 -K - A4 - 1050 - Vf - anch.A4 6 00104 73.30
HTA 38/17 -K - A4 - 6070 - Vf - anch.A4 31 00001 407.65 Item name Number of Article no. Price
Length [mm] anchors 0004.010- [EUR/item]
ANK-E FV = hot-dip galvanised
End anchor for assembly at a later date on HALFEN cast-in channel cut parts, HTA-V 38/17 - FV - 6070 - Vf 25 00003 94.75
officially approved Z - 21.4 - 34, see page 9. Item price per metre: 15.61 EUR/metre
Bolts, accessories
hex head bolt HTA-V 38/17 - FV - cut length - Vf

7 Standard cut length surcharge: 3.60 EUR/item
clamping element , See explanations on page 13.
Special cut length supplement 20 % , see explanations on page 13.
10
H A L F E N ca s t - i n channel s , br i ck t i e channel s
H Z A 41 / 2 2 HZA 38/23

Toothed HALFEN cast-in channels, HALFEN cast-in channel DYNAGRIP
officially approved hot - rolled,
Z - 21.4 - 145 officially approved
Z - 21.4 - 1691
1
Teeth
hot-rolled,
Item name Number of Article no. Price Teeth
FV = hot-dip galvanised Item name Number of Article no. Price
HZA 41/22 - FV - 100 - Vf 2 00301 6.75 Length [mm] anchors 0002.020- [EUR/item]
HZA 41/22 - FV - 150 - Vf 2 00302 7.70 FV = hot-dip galvanised
HZA 41/22 - FV - 200 - Vf 2 00303 8.40 HZA 38/23 - FV - 150 - Vf 2 00301 9.10 2
HZA 41/22 - FV - 250 - Vf 2 00304 9.10 HZA 38/23 - FV - 200 - Vf 2 00302 10.20
HZA 41/22 - FV - 300 - Vf 2 00305 9.85 HZA 38/23 - FV - 250 - Vf 2 00303 11.30
HZA 41/22 - FV - 350 - Vf 3 00306 12.45 HZA 38/23 - FV - 300 - Vf 2 00304 12.45
HZA 41/22 - FV - 400 - Vf 3 00307 13.05 HZA 38/23 - FV - 350 - Vf 3 00305 15.50
HZA 41/22 - FV - 550 - Vf 3 00308 15.45 HZA 38/23 - FV - 400 - Vf 3 00306 16.60
HZA 41/22 - FV - 1050 - Vf 5 00309 26.90 HZA 38/23 - FV - 550 - Vf 3 00307 19.90
HZA 41/22 - FV - 6070 - Vf 25 00003 136.75 HZA 38/23 - FV - 800 - Vf 4 00308 27.55
Lifting systems
Item price per metre: 22.53 EUR/metre HZA 38/23 - FV - 1050 - Vf 5 00309 35.20
HZA 41/22 - FV - cut length - Vf
HZA 38/23 - FV - 3030 - Vf
HZA 38/23 - FV - 6070 - Vf
13
25
00310
00003
92.20
177.60 3
Standard cut length surcharge: 4.30 EUR/item Item price per metre: 29.26 EUR/metre
SS 316-anchor SS 316 = channel + anchor, stainless steel L > 1050 mm Price per metre: 29.26 EUR/metre
HZA 41/22 - A4 - 100 - Vf - anch.A4 2 00101 19.25 Standard cut length surcharge: 5.90 EUR/item
HZA 41/22 - A4 - 150 - Vf - anch.A4 2 00102 22.40

HZA 41/22 - A4 - 200 - Vf - anch.A4 2 00103 25.60 SS 316-anchor SS 316 = channel + anchor, stainless steel
HZA 41/22 - A4 - 250 - Vf - anch.A4 2 00104 28.90 HZA 38/23 - A4 - 150 - Vf - Anch.A4 2 00101 29.70
HZA 41/22 - A4 - 350 - Vf - anch.A4
HZA 41/22 - A4 - 400 - Vf - anch.A4
3
3
00106
00107
40.00
43.10
HZA 38/23 - A4 - 250 - Vf - Anch.A4
HZA 38/23 - A4 - 300 - Vf - Anch.A4
2
2
00103
00104
43.90
50.85
4
Item price per metre: 82.03 EUR/metre HZA 38/23 - A4 - 800 - Vf - anch.A4 4 00108 126.50
HZA 38/23 - A4 - 1050 - Vf - anch.A4 5 00109 164.61
HZA 41/22 - A4 - cut length - Vf - anch.A4
HZA 38/23 - A4 - 3030 - Vf - anch.A4 13 00110 468.85
Standard cut length surcharge: 10 % HZA 38/23 - A4 - 6070 - Vf - anch.A4 25 00001 903.60
DETAN
Item price per metre: 148,86 EUR/metre
, See explanations on page 13. HZA 38/23 - A4 - cut length - Vf 5
Special cut length surcharge 20 % , see explanations on page 13. L > 1050 mm Price per metre: 148,86 EUR/metre
Standard cut length surcharge: 10%
H M S 2 5 / 15 D , See explanations on page 12
HALFEN brick tie channels with Special cut length surcharge 20 % , see explanations in right-hand column,
lug anchors and filler (Vf) lug anchors page 12.
(pre-cut,
easy to
Framing systems
bent out)
6
1 bundle = 100 items

Length [mm] 0013.010- [EUR/item]
SV = pre-galvanised
HMS 25/15 D - SV - 2500 - Vf 00001 5.85
Bolts, accessories
SS 316 = stainless steel 7

HMS 25/15 D - A4 - 2500 - Vf 00002 25.90
Note: ML type brick tie anchor suitable for HMS 25/15 D
→ see Bolts/accessories section, pages 146 and 147.
11
H alfen ca s t - i n channel s Dynag r i p s y s tem
HZA 29/20 HALFEN cast-in channel DYNAGRIP system - cut lengths

HALFEN cast-in channel DYNAGRIP When using the term cut lengths for HALFEN cast-in channels, a distinction is
hot-rolled, made between
officially approved • standard cut lengths (recommended)
1 Z - 21.4 - 1691 • special cut lengths

• Standard cut lengths
Standard cut lengths for the HALFEN cast-in channel DYNAGRIP system result from
Teeth positioning the anchors at the same distances, depending on the profile type:
Type HZA 38/23

Standard cut lengths [mm] / number of anchor type HZA 38/23

1300/ 6 1550/ 7 1800/ 8
2050/ 9 2300/ 10 2550/ 11 2800/ 12
HZA 29/20 - FV - 150 - Vf 2 00301 6.75
2 HZA 29/20 - FV - 200 - Vf 2 00302 7.50
3030/ 13
4050/ 17
3300/ 14
4300/ 18
3550/ 15
4550/ 19
3800/ 16
4800/ 20
HZA 29/20 - FV - 250 - Vf 2 00303 8.20
5050/ 21 5300/ 22 5550/ 23 5800/ 24
HZA 29/20 - FV - 300 - Vf 3 00304 9.00
HZA 29/20 - FV - 350 - Vf 3 00305 11.55
HZA 29/20 - FV - 400 - Vf 3 00306 12.35
HZA 29/20 - FV - 550 - Vf 4 00307 14.40
HZA 29/20 - FV - 1050 - Vf 6 00309 25.25
HZA 29/20 - FV - 3030 - Vf 16 00315 67.30
Lifting systems
HZA 29/20 - FV - 6070 - Vf 31 00003 129.55
3 Item price per metre:

21.34 EUR/metre Type HZA 29/20
Standard cut lengths [mm] / number of anchor type HZA 29/20
Standard cut length surcharge: 4.40 EUR/item 1650/ 9 1850/ 10 2050/ 11 2250/ 12
2450/ 13 2650/ 14 2850/ 15 3030/ 16
, See explanations in right-hand column. 3250/ 17 3450/ 18 3650/ 19 3850/ 20
Special cut length surcharge 20 % , see explanations in right-hand column. 4050/ 21 4250/ 22 4450/ 23 4650/ 24
4850/ 25 5050/ 26 5250/ 27 5450/ 28

5650/ 29 5850/ 30
At the time of order, please specify the cut length L [mm] required!
Ordering example for standard cut length:
HALFEN cast-in channel type: HZA 38/23 - FV

Standard cut length L required: 2550 mm
Item name: HZA 38/23 - FV - 2550
DETAN
5
Item price for standard cut lengths:
Metre price x standard cut length L [mm] + standard cut length
1000 surcharge/ Item
Example: 1 item HZA 38/23 - FV - 2550

Framing systems
EUR 29,26/m x 2550 mm

+ EUR 5.90/item = EUR 80.51
6 1000
Standard lengths, for prices see left-hand column.
• Special cut lengths

A cut length surcharge of 20% is added for HTA special cut lengths that do not
correspond to the standard cut lengths production. This surcharge covers the
additional technical product costs.
Bolts, accessories
This cut length surcharge is reduced for large volumes which make special
profiling possible. Please contact us for details of these prices.
7
12
H alfen ca s t - i n channel s - c u t len g th s , s pec i al ver s i o n s
HALFEN cast-in channels - cut lengths BS T concrete blocks with HALFEN cast-in channels

Explanations for footers , (on pages 4 to 11): Concrete block
When using the term cut lengths for HALFEN cast-in channels, a distinction is made between with HALFEN cast-in channel concrete block
• standard cut lengths (recommended) embedded in concrete
• special cut lengths
• Standard cut lengths
HALFEN cast-in 1
channel
Standard cut lengths result from an anchor module of 250 mm (with the
exception of the HTA-K type with ≤ 200 mm and 29/20 DYNAGRIP system →
page 12). This results in the following lengths: Item name Article no. Price
with HALFEN cast-in channel Concrete block dim.:
Standard cut lengths [mm] / number of anchors
Type: l x h x d [cm] 0039.020- [EUR/item]
1300/ 6 1550/ 7 1800/ 8
HALFEN cast-in channel version: FV = hot-dip galvanised
2050/ 9 2300/ 10 2550/ 11 2800/ 12
BST - HTA 40/22 - FV 24 x 11.3 x 11.5 00001 18.35
3030/ 13 3300/ 14 3550/ 15 3800/ 16
BST - HTA 40/22 - FV 49 x 7.1 x 24.0 00002 28.55
4050/ 17
5050/ 21
4300/ 18
5300/ 22
4550/ 19
5550/ 23
4800/ 20
5800/ 24
2
Radiused HALFEN cast-in channels
slot slot
inwards outwards
Lifting systems
Ordering example for standard cut length:
3
HALFEN cast-in channel type: HTA 40/25 - FV
Standard cut length required L: 1800 mm Min. bending radii for HALFEN cast-in channels type HTA (also see catalogue B)
Item name: HTA 40/25 - FV - 1800 Profile 72/48 55/42 52/34 54/33 50/30 49/30 40/22 40/25 38/17 28/15
min.Rsi 1.0 1.0 0.8 4.0 0.8 0.8 0.7 1.0 0.5 0.5
min.Rsa 4.0 4.0 4.0 8.0 4.0 8.0 2.0 3.0 1.5 1.0

Item price for standard cut lengths: The minimum bending radii apply to normal steel (wb, fv version) and stainless
Metre price x standard cut length L [mm] + standard cut length steel SS 316 (apart from HTA 72/48 and 55/42) profiles
1000 surcharge/ Item
Prices for bends upon request 4
Example: 1 item HTA 40/25 - FV - 1800
EUR 18.22/m x 1800 mm
+ EUR 4.30/item = EUR 37.10 HALFEN cast-in channels corner pieces
1000
for façade connection,
e.g. for conecting
• Special cut lengths HALFEN support brackets for
A cut length surcharge of 20 % is added for HTA special cut lengths that do not cladding masonry.
correspond to the standard cut lengths production. This surcharge covers the Standard version:
DETAN
additional technical product costs. HTA 38/17, side dimensions
a/b = 125/250 mm
5
This cut length surcharge is reduced for large volumes which make special
profiling possible. Please contact us for details of these prices. Other side dimensions Diagram:
a and b and other channel sizes can HTA 38/17 - corner piece
Note:
Special cut lengths can be produced economically on the construction site using be supplied upon request. Subject to alteration
Halfen ANK-E type end anchors (officially approved).
Material/version:
SS 316-anch.SS 316 = channel and anchor
in stainless steel SS 316
Framing systems
Diagram showing
application:
6
Prices upon request
ANK-E end anchors

can be supplied to
Bolts, accessories
match HALFEN cast-in

channels
HTA 28/15,
HTA 38/17,
7
HTA 40/22,
HTA 40/25,
Special cut length required
→ see page 9.
13
H alfen H andra i l Co nnect i o n s
HGB E H G B E E 17 0 / 17 0
Halfen handrail connections Halfen handrail connections, corner installation
Version:

W 1.4571/1.4401
SS 316 = stainless steel
W 1.4571/1.4401

Price and delivery details available upon request Price and delivery details available upon request
HGB E - 54/33 H G B E E 5 4 / 3 3 - 17 0 / 17 0
Corners installation
2 stainless steel SS 316 stainless steel SS 316

Item name Article no. Price Item name Article no. Price
Length [mm] 0003.040- [EUR/item] Length [mm] 0003.080- [EUR/item]
HGB E - 54/33 - 100 -A4 00001 43.10 HGB EE - 54/33 - 170/170 -A4 00001 109.50
HGB E - 54/33 - 150 -A4 00003 49.10
HGB E - 54/33 - 200 -A4 00004 55.25
Lifting systems
HGB E - 49/30 H G B E E 4 9 / 3 0 - 17 0 / 17 0
3 Corners installation
stainless steel SS 316 stainless steel SS 316
HGB E - 49/30 - 100 -A4 00001 33.20 HGB EE - 49/30 - 170/170 -A4 00001 94.65
HGB E - 49/30 - 150 -A4 00003 36.55
HGB E - 49/30 - 200 -A4 00004 40.15
4 HGB E - 40/25 H G B E E 4 0 / 2 5 - 17 0 / 17 0
:
HGB E - 40/25 - 100 -A4 00001 29.65 HGB EE - 40/25 - 170/170 -A4 00001 79.20
DETAN
HGB E - 40/25 - 150 -A4 00003 32.40

5 HGB E - 40/25 - 200 -A4 00004 34.85
H G B E - 3 8 / 17 H G B E E 3 8 / 17 - 17 0 / 17 0

Framing systems
6 HGB E - 38/17 - 100 -A4

HGB E - 38/17 - 150 -A4
00001
00003
28.35
30.50
HGB EE - 38/17 - 170/170 -A4 00001 63.05
HGB E - 38/17 - 200 -A4 00004 32.60
HGB M HGB M
Halfen handrail connections, T-bolt & nut Item Thread x length Material Article no. Price
name [mm] 0030. [EUR/100 items]
suitable for HGB M - 50/30 - M12 x 40 - A4 - 70 090-00001 1,280.95
Bolts, accessories
Version: Type: Profiles HGB M - 50/30 - M16 x 50 - A4 - 70 090-00002 2,386.85

SS 316-70 = stainless steel
HGB E - 54/33
7 Material grade
A4-70
HGB M - 50/30
HGB E - 49/30 HGB M - 40/22 - M12 x 40 - A4 - 70 070-00001 1,216.25
HGB M - 40/22 HGB E - 40/25 HGB M - 40/22 - M16 x 40 - A4 - 70 070-00002 1,331.35
HGB M - 38/17 HGB E - 38/17 HGB M - 38/17 - M12 x 40 - A4 - 70 050-00001 805.95

HGB M - 38/17 - M16 x 40 - A4 - 70 050-00002 1,101.10
14
H alfen channel s f o r s elf - tapper s & co rner g uard s
HTU 60/22/3 HKW

Halfen channels for self-tappers with foam filler (Sf), HALFEN corner guard
officially approved
Z - 21.4 - 84
1
Anchor shape AN
1 bundle = 48 items

Anchor shape D
1 bundle = 100 items Length [mm] anchors 0027. [EUR/item] 2
Item Anchor shape/ length No. of anch. Article no. Price HKW 50/5 - FV - 500/ 2 2 010-00001 21.85
name position [mm] (pairs) 0015.010- [EUR/item] HKW 50/5 - FV - 750/ 2 2 010-00002 26.20
FV = hot-dip galvanised HKW 50/5 - FV - 1000/ 2 2 010-00003 35.00
HTU 60/22/3 - AN2 - FV - 3000 - Sf 8 00001 41.10 HKW 50/5 - FV - 1500/ 3 3 010-00004 43.15
Item price per metre: 13.67 EUR/metre HKW 50/5 - FV - 2000/ 4 4 010-00005 55.45
HTU 60/22/3 - D2 - FV - 3000 - Sf 8 00003 41.10
Lifting systems
HTU 60/22/3 - AN3 - FV - 3000 - Sf
20 00002
19.23 EUR/metre
57.70 HKW 80/6 - FV - 750/ 2
HKW 80/6 - FV - 1000/ 2
2
2
020-00002
020-00003
37.45
49.90 3
HTU 60/22/3 - D3 - FV - 3000 - Sf 20 00004 57.70 HKW 80/6 - FV - 1500/ 3 3 020-00004 65.20
SS 316 = stainless steel HKW 100/8 - FV - 500/ 2 2 030-00001 38.55

HTU 60/22/3 - AN2 - A4 - 3000 - Sf 8 00051 164.90 HKW 100/8 - FV - 750/ 2 2 030-00002 52.75

HTU 60/22/3 - D2 - A4 - 3000 - Sf 8 00053 164.90 HKW 100/8 - FV - 1500/ 3 3 030-00004 95.40
HTU 60/22/3 - AN3 - A4
- 3000 - Sf 20 00052
71.93 EUR/metre
215.80
4
HTU 60/22/3 - D3 - A4 - 3000 - Sf 20 00054 215.80 HKW 50/5 - A2- 500/ 2 2 010-00006 53.20
Item price per metre: 71.93 EUR/metre HKW 50/5 - A2- 750/ 2 2 010-00007 66.20
HKW 50/5 - A2- 1000/ 2 2 010-00008 89.05
HTU 60/22/6 HKW 50/5 - A2- 1500/ 3 3 010-00009 113.85
Halfen channels for self-tappers with foam filler (Sf), HKW 50/5 - A2- 2000/ 4 4 010-00010 148.30
officially approved
Z - 21.4 - 84 HKW 80/6 - A2- 500/ 2 2 020-00006 75.95
DETAN
HKW 80/6 - A2- 750/ 2 2 020-00007 101.45
HKW 80/6 - A2- 1000/ 2 2 020-00008 136.00 5
HKW 80/6 - A2- 1500/ 3 3 020-00009 183.15
HKW 80/6 - A2- 2000/ 4 4 020-00010 239.80
HKW 100/8 - A2- 500/ 2 2 030-00006 107.55

HKW 100/8 - A2- 750/ 2 2 030-00007 149.85
Anchor shape AN HKW 100/8 - A2- 1000/ 2 2 030-00008 202.00
1 bundle = 48 items
HKW 100/8 - A2- 1500/ 3 3 030-00009 279.80
Framing systems
HKW 100/8 - A2- 2000/ 4 4 030-00010 366.85

Anchor shape D
1 bundle = 100 items
Explanation of anchor positioning HTU (measurements in mm):
6
Item Anchor shape/ length No. of anch. Article no. Price AN2 and D 2 with 8 anchors or pairs of anchors, can be cut in the centre
name position [mm] (pairs) 0015.020- [EUR/item]
HTU 60/22/6 - AN2 - FV - 3000 - Sf 8 00001 66.35
HTU 60/22/6 - D2 - FV - 3000 - Sf 8 00003 66.35
Bolts, accessories
Item price per metre: 22.12 EUR/metre AN3 and D 3 with 20 anchors or pairs of anchors,
HTU 60/22/6 - AN3 - FV - 3000 - Sf 20 00002 83.70 can be cut into length by the customer
Item price per metre: 27.90 EUR/metre 7
HTU 60/22/6 - D3 - FV - 3000 - Sf 20 00004 83.70
15
dem u s o cket s / i n s ert s
AH-Q AH-WN
Demu sockets/inserts Demu sockets/inserts

with cross pin with waved end,
with nailing plate
Item name PU Article no. Price Item name PU Article no. Price
d x L [mm] [items] 0020.080- [EUR/100 items] d x L [mm] [items] 0020.110- [EUR/100 items]
GV = electro plated GV = electro plated

AH - Q - M 10 x 50 - GV 200 00001 98.35 AH - WN - M 10 x 60 - GV 200 00001 78.70
2 AH - Q - M 12 x 60 - GV 200 00002 110.45 AH - WN - M 12 x 70 - GV 200 00002 98.35

Lifting systems
AH-QN AH-H
3 Demu sockets/inserts
with cross pin,
Demu sockets/inserts
angled
with nailing plate
Item name PU Article no. Price

d x L [mm] [items] 0020.040- [EUR/100 items]
Item name PU Article no. Price GV = electro plated
4 d x L [mm] [items] 0020.090- [EUR/100 items] AH - H - M 8 x 50 - GV 500 00001 55.95
GV = electro plated
AH - QN - M 10 x 50 - GV 200 00001 128.60 AH - H - M 10 x 60 - GV 400 00002 75.60


AH - H - M 16 x 100 - GV 100 00006 175.50
DETAN
AH - QN - M 24 x 120 - GV 524.35
5 50 00005
AH - H - M 20 x 70 - GV 100 00007 192.15
AH-W AH - H - M 20 x 100 - GV 50 00008 228.45
with waved end AH - H - M 24 x 80 - GV 50 00009 329.80
AH-HN
Framing systems
angled,
with nailing plate
6 Item name PU Article no. Price

GV = electro plated
AH - W - M 10 x 50 - GV 500 00001 42.35
AH - W - M 10 x 60 - GV 500 00002 48.40 Item name PU Article no. Price
AH - W - M 12 x 50 - GV 400 00003 53.00 GV = electro plated
Bolts, accessories
AH - W - M 12 x 70 - GV 400 00004 62.05 AH - HN - M 10 x 60 - GV 400 00001 104.40
7 AH - W - M 16 x 100 - GV 100 00005 127.05 AH - HN - M 12 x 70 - GV 200 00002 136.15
16
dem u s o cket s / i n s ert s
AH-L AH-D

Demu sockets/inserts Demu sockets/inserts,
with round hole thick-walled, with round hole
for reinforcement loop
1
d x L [mm] [items] 0020.060- [EUR/100 items] d x L [mm] [items] 0020.030- [EUR/100 items]
AH - L - M 6 x 40 - GV 500 00001 28.70 AH - D - M 12 x 60 - GV 200 00001 110.45
AH - L - M 8 x 40 - GV 500 00002 28.70 AH - D - M 16 x 75 - GV 100 00002 151.30
AH - L - M 8 x 50 - GV 500 00003 31.80
AH - D - M 20 x 90 - GV 75 00003 266.25 2
AH - L - M 10 x 50 - GV 500 00004 53.00
AH - D - M 24 x 100 - GV 50 00004 393.30
AH - L - M 12 x 60 - GV 400 00005 66.55
AH - L - M 12 x 70 - GV 400 00006 72.65 AH - D - M 30 x 135 - GV 25 00005 833.65
AH - L - M 16 x 70 - GV 200 00007 101.35 AH-Z1

AH - L - M 16 x 80 - GV 200 00008 108.95 Retaining disc,
Lifting systems
AH - L - M 16 x 100 - GV 100 00009 128.60 for nailing
AH - L - M 16 x 120 - GV 100 00010 154.30 to the framework
3
AH - L - M 20 x 100 - GV 100 00011 183.00
AH - L - M 20 x 120 - GV 100 00012 210.30
AH - L - M 24 x 120 - GV 50 00013 334.35 Item name Article no. Price

Ø s for thread 0021.010- [EUR/100 items]

AH - L - M 30 x 150 - GV 25 00014 526.50 KS = plastic
AH - Z1 - M 8 - KS 00001 31.80
AH-LN AH - Z1 - M 10 - KS 00002 33.30
Demu sockets/inserts AH - Z1 - M 12 - KS
AH - Z1 - M 16 - KS
00003
00004
33.30
36.30
4
with round hole,
and nailing plate AH - Z1 - M 20 - KS 00005 36.30
AH - Z1 - M 24 - KS 00006 37.80
AH - Z1 - M 27 - KS 00008 37.80
AH - Z1 - M 30 - KS 00007 40.85
PU [items] = packaging nit [items]
DETAN
GV = electro plated 5
AH - LN - M 10 x 50 - GV 200 00001 81.70
AH - LN - M 12 x 70 - GV 200 00002 105.85
AH - LN - M 16 x 80 - GV 100 00003 157.30

AH - LN - M 16 x 100 - GV 100 00004 177.00
Framing systems
AH - LN - M 20 x 100 - GV 100 00005 231.50
AH - LN - M 24 x 120 - GV 50 00006 375.15

6
Bolts, accessories
Note
Demu sockets/inserts can also be supplied in the following
versions:
Delivery 7
and pricing
SS 316 = stainless steel W 1.4571/1.4401 (A4) details
SS 304 = stainless steel W 1.4301 (A2) upon request
WB = mill finish
17
deha s hear b o lt anch o r s
3800 3801
Shear bolt anchor with ceramic ring, Shear bolt anchor with ceramic ring,
Ø 10 to 16 mm Ø 19 to 22 mm
Material S 235 J2 G3+C450 Material S 235 J2 G3+C450
1 (St 37-3 K) (St 37-3 K)

d x L [mm] [items] 0025.010- [EUR/item] d x L [mm] [items] 0025.020- [EUR/item]
3800 -10 - 50 4000 00001 0.60 3801 -19 - 60 1200 00001 0.95
2 3800 -10 - 75 3000 00002 0.60 3801 -19 - 75 1000 00002 1.00
3800 -10 -100 2500 00003 0.70 3801 -19 - 80 1000 00003 1.00
3800 -10 -125 2000 00004 0.90 3801 -19 -100 800 00004 1.10
3800 -10 -150 1500 00005 0.90 3801 -19 -125 600 00005 1.35
3800 -10 -175 1000 00006 0.95 3801 -19 -150 500 00006 1.45
3801 -19 -175 400 00007 1.65
3800 -13 - 50 2000 00007 0.70
3800 -13 - 75 2000 00008 0.70 3801 -22 - 75 850 00008 1.15
Lifting systems
3800 -13 -100 1500 00009 0.85 3801 -22 -100 600 00009 1.35
3 3800
3800
-13
-13
-125
-150
1200
900
00010
00011
0.95
0.95
3801
3801
-22
-22
-125
-150
500
350
00010
00011
1.60
1.75
3800 -13 -175 600 00012 1.00 3801 -22 -175 350 00012 2.00
PU [items] = packaging unit [items]
3800 -16 - 50 1500 00013 0.90
3800 -16 - 75 1200 00014 0.90
3800 -16 -100 1000 00015 0.95
3800 -16 -125 800 00018 1.10

3800 -16 -150 600 00016 1.15
3800 -16 -175 500 00017 1.35
4
DETAN
5
Framing systems
6
Bolts, accessories
18
concrete connection systems

Features Benefits
▪ Efficient modular sizes Cost saving installation 1

▪ Meets insulation No costly component
requirements (EnEv) insulation verification for
the planner
▪ Official approval
▪ Thermally separates external HALFEN HIT Reduces risk of condensa-
concrete components from the tion and mould 2
building
lifting systems
Features Benefits 3
▪ Force-fit special thread No torque
wrenches needed
▪ Visual thread engagement check
façade connection systems

▪ Pre-fabricated Safety
reinforcement connection
Rapid availability
4
▪ Metric thread to diam. 20
Steel connections possible
▪ Special sockets for steel
HALFEN HBS-05 More stringent corrosion
connections also available in
protection requirements
stainless steel and hot-dip
can be met
galvanised versions
Detan
5
Features Benefits
▪ Type testing based on DIN 1045-1 Costly verification not

framing systems
▪ Low box heights needed, more time is
▪ Extensive product range

gained during planning 6
▪ Can be used horizontally and Easy to install because
vertically there is no conflict with
reinforcement system
Bolts, accessories
Custom part configuration

can be produced 7
HALFEN HBT Simplifies construction
19
19
H a l f e n h i t - B X b a lco n y co n n e c t i o n s
HIT-BX
Hit-Bx
Connections for projecting balconies with positive shear load support
Balcony Floor slab Basic type Concrete Module Items per Price
1 cover length
[m]
PU
for slab thickness h [cm] [EUR/item]
HIT-BX 8/5 1.00 96.15
HIT-BX 8/10 1.00 131.15
HIT-BX 8/14 1,2) 1.00 157.80
HIT-BX 12/8 1,2) All specified 1.00 175.30
20 when h = 16 cm
concrete covers
HIT-BX 12/10 1,2) 1.00 18 when h = 18 cm 210.20
can be supplied
HIT-BX 12/11 1,2,3) 1.00 16 when h = 20 cm 222.70

upon request
HIT-BX 12/12 1,2,3)
1.00 236.65
HIT-BX 14/10 1,2,3) 1.00 263.20
2 HIT-BX 14/12 1,2,3) 1.05 311.10
Additional product features Additional charge
[EUR/item]
Hit-B 1.0
Hit-Bx 1.0metre
metremodule
module for slab thickness h ≥ 21 cm, logistics supplement upon request
F90 = fire resistant F90 18.75
1)
QE = increased absorption of shearing force as of slab thickness h ≥ 18 cm
upon request
2)
QEE = increased absorption of shearing force as of slab thickness h ≥ 19 cm
3)
Tension rods as HBS-05 type reinforcement connection + 10 % on top of basic price
Lifting systems
HIT-BX±Q
3 HIT-BX±Q Connections for projecting balconies with positive shear load support
Balcony Floor slab Basic type Concrete Module Items per Price
cover length PU
[m] for slab thickness h [cm] [EUR/item]
HIT-BX±Q 8/5 1.00 120.10
HIT-BX±Q 8/10 1.00 163.95

Officially approved Z - 15.7 - 238 HIT-BX±Q 8/14 1,2) 1.00 196.80
HIT-BX±Q 12/8 1,2) All specified 1.00 212.70
20 when h = 16 cm
4 HIT-BX±Q
HIT-BX±Q
12/10 1,2)
12/11 1,2,3)
concrete covers
can be supplied
1.00
1.00
18 when h = 18 cm
16 when h = 20 cm
246.50
259.40
upon request
HIT-BX±Q 12/12 1,2,3) 1.00 272.25
HIT-BX±Q 14/10 1,2,3) 1.00 297.90
HIT-BX±Q 14/12 1,2,3) 1.05 365.30

[EUR/item]
for slab thickness h ≥ 21 cm, logistics supplement upon request
DETAN

5 1)
upon request
2)
3)
HIT-BX-MOD
Connections for projecting balconies with positive shear load support, 20 cm module
Framing systems
Basic type Concrete Module Items per Price

cover length PU
6 HIT-BX-MOD-A All specified

[m]
0.20
42.05
50 when h = 16 cm
Hit-Bx-20 cm-Modul HIT-BX-MOD-B2) concrete covers 0.20 62.20
45 when h = 18 cm
HIT-BX-MOD-C1,2) can be supplied 0.20 66.80
40 when h = 20 cm
Officially approved Z - 15.7 - 238 HIT-BX-MOD-D1) upon request 0.20 46.65

[EUR/item]
Bolts, accessories

7 1)
can be supplied as of slab thickness h ≥ 18 cm
2)
20
H a l f e n H IT - B X b a lco n y co n n e c t i o n s
HIT-BX-CORNER HIT-BX-CORNER

Connection for balconies that project at external corners
Balcony Floor slab
cover length
[m]
PU
1
HIT-BX corner 10/7 1) 0.68/0.68 278.30
Can be supplied 5 when h = 18 cm
HIT-BX corner 12/7 1.2) 0.68/0.68 397.90
upon request 4 when h = 20 cm
HIT-BX corner 12/10 3) 0.68/0.68 509.50
[EUR/item]
1)
can be supplied as of slab thickness h ≥ 18 cm 2
2)
QE = increased shear resistance for slab thickness
h ≥ 18 cm upon request
3)
Hit-Bx corner
Lifting systems
HIT-BX-HV
HIT-BX-HV Connection for projecting balconies set lower than the floor slab
3
HIT-BF-HV
Floor slab

Balcony
cover length PU
[m] [EUR/item]

HIT-BX-HV10 8/5 1.00 129.70
HIT-BX-HV10 8/10 All 1.00 174.50
HIT-BX-HV10 8/14 specified 1.00 209.95
HIT-BX-HV10 12/8
HIT-BX-HV10 12/10
concrete covers
can be supplied
1.00
1.00
2 236.60
277.05
4
HIT-BX-HV10 12/11 upon request 1.00 311.70
HIT-BX-HV10 12/12 1.00 320.45
HIT-BX-HV15 8/5 1.00 129.70

HIT-BX-HV15 8/10 All 1.00 174.50
HIT-BX-HV15 8/14 specified 1.00 209.95
Hit-Bx-HV 1.0 metre module HIT-BX-HV15 12/8 concrete covers 1.00 2 236.60
can be supplied
DETAN
HIT-BX-HV15 12/10 1.00 277.05
HIT-BX-HV15 12/11 upon request 1.00 311.70 5
HIT-BX-HV15 12/12 1.00 320.45

[EUR/item]
Framing systems
6
Bolts, accessories
21
H a l f e n h i t - B X b a lco n y co n n e c t i o n s
HIT-BX-BH
Connection for projecting balconies set higher than the floor slab
Balcony Basic type Concrete Module Items per Price
1 Floor slab
cover length
[m]
PU
[EUR/item]
HIT-BX-BH HIT-BX-BH10 8/5 1.00 129.70
HIT-BF-BH
HIT-BX-BH10 8/10 All 1.00 174.50
HIT-BX-BH10 8/14 specified 1.00 209.95
HIT-BX-BH10 12/8 concrete covers 1.00 2 236.60
HIT-BX-BH10 12/10 can be supplied 1.00 277.05
HIT-BX-BH10 12/11 upon request 1.00 311.70

HIT-BX-BH10 12/12 1.00 320.45
2 HIT-BX-BH15 8/5 1.00 129.70

HIT-BX-BH15 8/10 All 1.00 174.50
Hit-Bx BH 1.0 metre module HIT-BX-BH15 8/14 specified 1.00 209.95
HIT-BX-BH15 12/8 concrete covers 1.00 2 236.60
HIT-BX-BH15 12/10 can be supplied 1.00 277.05
HIT-BX-BH15 12/11 upon request 1.00 311.70
HIT-BX-BH15 12/12 1.00 320.45
Lifting systems
3 for slab thickness h ≥ 21 cm, logistics supplement

[EUR/item]
upon request
HIT-BX- WO/- WU
Connection for projecting balconies to upstand or downstand walls
Wall
HIT-BX-WO
4 HIT-BF-WO Basic type Concrete

cover
Module
length
Items per
PU
Price
[m] [EUR/item]
Balcony
HIT-BX-WO 8/5 1.00 129.70
HIT-BX-WO 8/10 All 1.00 174.50
HIT-BX-WO 8/14 specified 1.00 209.95
HIT-BX-WO 12/8 concrete covers 1.00 2 236.60
HIT-BX-WO 12/10 can be supplied 1.00 277.05
HIT-BX-WO 12/11 upon request 1.00 311.70
HIT-BX-WO 12/12 1.00 320.45
DETAN
5 HIT-BX-WU 8/5 1.00 129.70

HIT-BX-WU 8/10 All 1.00 174.50
HIT-BX-WU 8/14 specified 1.00 209.95
HIT-BX-WU 12/8 concrete covers 1.00 2 236.60
Hit-Bx WO 1.0 metre module HIT-BX-WU 12/10 can be supplied 1.00 277.05
HIT-BX-WU 12/11 upon request 1.00 311.70
HIT-BX-WU 12/12 1.00 320.45
Framing systems

6 [EUR/item]
Hit-Bx WU 1.0 metre module

Bolts, accessories
22
H a l f e n h i t - B F b a lco n y co n n e c t i o n s
HIT-BF

Two-part connection for projecting precast balconies.
HIT-BF
Balcony Floor slab cover length
[m]
PU
1
HIT-BF 8/5 1.00 96.15
HIT-BF 8/10 1.00 131.15
HIT-BF 8/14 1,2) All 1.00 Upper section and lower 157.80
HIT-BF 12/8 1,2) specified 1.00 section pair. 175.30
HIT-BF 12/10 1,2) concrete covers 1.00 20 when h = 16 cm 210.20
HIT-BF 12/11 1,2,3) can be supplied 1.00 18 when h = 18 cm 222.70
HIT-BF 12/12 1,2,3) upon request 1.00 16 when h = 20 cm 236.65
HIT-BF 14/10 1,2,3) 1.00 263.20
HIT-BF 14/12 1,2,3) 1.05 311.10 2
[EUR/item]
Two-part HIT-BF, 1.0 metre module for slab thickness h ≥ 21 cm, logistics supplement upon request
Officially approved Z - 15.7 - 238 F90 = fire resistant F90 18.75
1)
upon request
2)
Lifting systems
3)
Tension rod as HBS-05 type reinforcement connection + 10 % on top of basic
HIT-BF±Q 3
Two-part connection for projecting balconies with positive and negative shear load support
HIT-BF-±Q
Balcony Floor slab cover length PU

HIT-BF±Q 8/5 1.00 120.10
HIT-BF±Q 8/10 1.00 163.95
HIT-BF±Q 8/14 1,2) All 1.00 Upper section and lower 196.80
HIT-BF±Q
HIT-BF±Q
12/8 1,2)
12/10 1,2)
specified
concrete covers
1.00
1.00
section pair.
20 when h = 16 cm
212.70
246.50
4
HIT-BF±Q 12/11 1,2,3) can be supplied 1.00 18 when h = 18 cm 259.40
HIT-BF±Q 12/12 1,2,3) upon request 1.00 16 when h = 20 cm 272.25
HIT-BF±Q 14/10 1,2,3) 1.00 297.30
HIT-BF±Q 14/12 1,2,3) 1.05 365.30

[EUR/item]
DETAN
F90 = fire resistant F90 18.75 5
1)
upon request
2)
3)
HIT-BF -MOD
Two-part connection for projecting balcony - 20 cm module
Framing systems

cover length
[m]
PU
6
HIT-BF-MOD-A All specified 0.20 42.05
50 when h = 16 cm
HIT-BF-MOD-B2) concrete covers 0.20 62.20
45 when h = 18 cm
HIT-BF-MOD-C1,2) can be supplied 0.20 66.80
40 when h = 20 cm
Two-part HIT-BF 20 cm module HIT-BF-MOD-D1) upon request 0.20 46.65
Officially approved Z - 15.7 - 238
Bolts, accessories
[EUR/item]
F90 = fire resistant F90 6.50 7
1)
2)
23
H a l f e n h i t - B F + B Q b a lco n y co n n e c t i o n s
HIT-BF -HV/-BH/- WO/- WU

Connection for projecting balconies with height offset or as wall connection
Basic type Module Items per Price
1 length
[m]
PU
[EUR/item]
All BF modules
Price
can be supplied modelled on the BX 1.00 2
see HIT-BX
connections
2
HIT-BQ 1.0 metre module
Continous connection for balconies at columns

HIT-BQ
length PU
Balcony Floor slab HIT-BQ 0406 1.00 53.00
Lifting systems
HIT-BQ 0506 1.00 63.75
3 HIT-BQ
HIT-BQ
0606
0806
1.00
1.00
40 when h = 16 cm
67.95
79.40
36 when h = 18 cm
HIT-BQ 0608 1.00 90.90
32 when h = 20 cm
HIT-BQ 0808 1.00 102.35
HIT-BQ 0610 1) 1.00 115.15
HIT-BQ 0810 1) 1.00 138.90

[EUR/item]
4 F90 = fire resistant F90
1)
18.75
Hit-BQ 1.0 metre module
HIT-BQ shor t length options

Continous connection for balconies at columns
HIT-BQ
DETAN
5 Balcony Floor slab

Basic type Module Slab thickness h Items per Price
length PU
[m] [cm] for slab thickness h [cm] [EUR/item]
HIT-BQ 6/4 K 0.50 16/18/20 80/72/64 51.00
HIT-BQ 8/2 0.30 16/18/20 100/88/76 38.60
HIT-BQ 8/3 0.40 16/18/20 56/46/40 59.80
HIT-BQ 8/4 0.50 16/18/20 80/72/64 74.70
HIT-BQ 10/2 1) 0.30 18/20 88/76 61.00
Framing systems
HIT-BQ 10/3 1) 0.40 18/20 48/40 80.00
6 HIT-BQ
HIT-BQ
10/4 1)
12/2 2)
0.50
0.30
18/20
20
72/64
76
100.30
76.95
HIT-BQ 12/3 2) 0.40 20 40 103.50
HIT-BQ 12/4 2) 0.50 20 64 131.70
Hit-BQ short length example Additional product features Additional charge

Officially approved Z - 15.7 - 238 [EUR/item]
Bolts, accessories

1)
7 2)
24
H a l f e n h i t - B Q b a lco n y co n n e c t i o n s
HIT±BQ 1.0 metre module

Hit-±BQ Continous connection for balconies with positive and negative shear loads at column

Balcony Floor slab length
[m]
PU
1
Hit-±BQ 1.0 metre HIT±BQ 0406 1.00 76.80
module HIT±BQ 0506 1.00 92.40
Officially approved Z - 15.7 - 238 HIT±BQ 0606 1.00 98.55
40 when h = 16 cm
HIT±BQ 0806 1.00 115.15
36 when h = 18 cm
HIT±BQ 0608 1.00 131.80
32 when h = 20 cm
HIT±BQ 0808 1.00 148.40
HIT±BQ 0610 1) 1.00 167.05
HIT±BQ 0810 1) 1.00 200.25
2
[EUR/item]
HIT±BQ 1)
Lifting systems
HIT±BQ shor t pieces
Hit-±BQ
Continous connection for balconies with positive and negative shear loads at column
3
Basic type Module Slab thickness Items per Price
length h PU
Balcony Floor slab
[m] [cm] for slab thickness h [cm] [EUR/item]
HIT±BQ 6/4 K 0.50 16/18/20 80/72/64 70.90
HIT±BQ 8/2 0.30 16/18/20 100/88/76 60.20

HIT±BQ 8/3 0.40 16/18/20 56/48/40 79.70
HIT±BQ 8/4 0.50 16/18/20 80/72/64 94.60
HIT±BQ 10/2 1) 0.30 18/20 88/76 75.85
HIT±BQ 10/3 1) 0.40 18/20 48/40 99.90 4
HIT±BQ 10/4 1) 0.50 18/20 72/64 120.10
HIT±BQ 12/2 2) 0.30 20 76 100.15
HIT±BQ 12/3 2) 0.40 20 40 140.25
HIT±BQ 12/4 2) 0.50 20 64 180.15
HIT±BQ short length example Additional product features Additional charge

[EUR/item]
DETAN
1)
can be supplied as of slab thickness h ≥ 18 cm 5
2)
Hit-BQn
HIT-BQ 8/2 N
Column connection for balconies with negative shear loads.
Floor slab
Framing systems
Balcony Basic type Product Module Items per Price

feature length PU
[m] for slab thickness h [cm] [EUR/item] 6
HIT-BQ 8/2 N Normal 0.30 100/88/76 38.60
HIT-BQ 8/2 N F 90 0.30 when h = 16/18/20 cm 49.60

[EUR/item]
Bolts, accessories
Hit-BQ 8/2 N F90 = fire resistant F90 11.05
25
H a l f e n h i t - B D / - AT / - FT / - OT b a lco n y co n n e c t i o n s
HIT-BD
Connection for positive and negative moment and shear loads
1 Balcony Floor slab cover length

[m]
PU
HIT-BD 12/7 1.00 11 when h = 16 cm 218.20
Can be supplied
HIT-BD 12/10 1.00 10 when h = 18 cm 264.65
upon request
HIT-BD 14/10 1.00 9 when h = 20 cm 315.40

[EUR/item]
for slab thickness h ≥ 21 cm, logistics supplement 11.40
2 QE = increased absorption of shearing force as of slab thickness h ≥ 18 cm 37.50
QEE = increased absorption of shearing force as of slab thickness h ≥ 19 cm 56.25
HIT-BD
Attic HIT- AT
Connection for attic parapet
Lifting systems
HIT-AT Basic type Product Module Price

Items per
3 Floor slab
features length
[m]
PU
[EUR/item]
HIT-AT Normal 0.30 76.50
20
HIT-AT F90 0.30 100.90

[EUR/item]
for attic width h ≥ 21 cm, logistics supplement 8.30

4 HIT-AT
HIT-FT
HIT-FT
Parapet connection
Parapet
Basic type Product Module Items per Price
Floor slab
features length PU
[m] [EUR/item]
HIT-FT Normal 0.30 70.55
20
DETAN
HIT-FT F90 0.30 95.00

5
[EUR/item]
HIT-FT
Framing systems
HIT-OT
6 Corbel
Corbel connection
Floor slab
Basic type Product Module Items per Price
feature length PU
[m] [EUR/item]
HIT-OT
HIT-OT 1) Normal 0.30 84.55
20
HIT-OT 1) F90 0.30 108.90
Bolts, accessories

7 [EUR/item]
HIT-OT 1)
26
h a l f e n h i t - ST / - W T / - S a n c h o r b a lco n y co n n e c t i o n s
HIT-ST

Corbel connections
Inside Basic type Module Items per Price

Corbel shear
wall
dimensions
w x h [cm]
PU
[EUR/item]
1
HIT-ST1 20/40 119.50
HIT-ST2 20/40 143.70
2
HIT-ST HIT-ST3 20/40 186.60
HIT-ST4 20/40 252.85
[EUR/item]
Additional charge for VBII tension rods (moderate connection) 27.35 2
Price for special designs provided upon request
HIT-ST
Lifting systems
HIT- W T
Connection for wall panels
3
Outside shear wall Inside shear wall Basic type Module Price
Items per
dimensions PU
w x h [cm] [EUR/item]
HIT-WT 1 15-25/150-350 2 upon request


[EUR/item]
4
F90 = fire resistant F90 upon request
Price for special designs provided upon request
HIT-WT
DETAN
HIT-S anchor 5
Separate reinforcement rod for horizontal shear loads
Basic type length Article no. PU Price

[mm] 0940.010- [EUR/item]
HIT-S anchor-8 820 00001
Delivery
HIT-S anchor-10 1150 00002 upon request
Framing systems
as loose rod
HIT-S anchor HIT-S anchor-12 1180 00003
6
Bolts, accessories
27
H a l f e n H B s - 0 5 t H R e a D e D R e i n f o R c e M e n t co n n e c t i o n s
HBs-05-s HBs-05-B
Socket bar with threaded socket, Forged socket bar with nailing slab,
incl. threaded screw plug, incl. threaded plug,
officially approved Z - 1.5 - 189 officially approved Z - 1.5 - 189
Item name Dimensions Screw-in Article no. Price Item name Dimensions Screw-in Article no. Price
dS/L of thread depth dS/L of thread depth

[mm] L1 [mm] 0053.020- [EUR/item] [mm] L1 [mm] 0053.010- [EUR/item]
HBs-05-s-12/ 400* 00001 5.00 HBs-05-B-12/ 400* 00001 5.90
2 HBs-05-s-12/ 610
M12 16.5
00002 5.25 HBs-05-B-12/ 610 00002 5.95
HBs-05-s-12/ 860 00003 5.50 HBs-05-B-12/ 860 M12 18 00003 6.50
HBs-05-s-12/1180 00004 6.00 HBs-05-B-12/1180 00004 8.00
HBs-05-B-12/1300 00005 8.50
HBs-05-s-14/ 400* 00005 6.10
HBs-05-s-14/ 700 00006 6.45 HBs-05-B-14/ 400* 00006 7.05
M14 19.5
HBs-05-s-14/ 990 00007 7.15 HBs-05-B-14/ 700 00007 7.30
M14 21
HBs-05-s-14/1370 00008 7.55 HBs-05-B-14/ 990 00008 8.15
lifting systems
HBs-05-B-14/1370 00009 9.55
3 HBs-05-s-16/ 400*
HBs-05-s-16/1110 M16 22.5
00009
00010
6.75
7.85 HBs-05-B-16/ 400* 00010 7.35
HBs-05-s-16/1570 00011 9.10 HBs-05-B-16/1110 M16 25.5 00011 8.90
HBs-05-B-16/1570 00012 10.05
HBs-05-s-20/ 400* 00012 8.35
HBs-05-s-20/1380 M20 28.5 00013 12.10 HBs-05-B-20/ 400* 00013 8.40
HBs-05-s-20/1960 00014 14.10 HBs-05-B-20/1380 M20 30 00014 12.60
HBs-05-B-20/1960 00015 14.75

HBs-05-s-25/ 400* 00015 10.85
HBs-05-s-25/1730 M25 x 2.5 36.0 00016 18.75 HBs-05-B-25/ 400* 00016 11.40
4 HBs-05-s-25/2460 00017 21.90 HBs-05-B-25/1730
HBs-05-B-25/2460
M25 x 2.5 39 00017
00018
19.80
24.05
HBs-05-s-28/ 400* 00018 14.00
HBs-05-s-28/1930 M28 x 2.5 40.5 00019 23.60 HBs-05-B-28/ 400* 00019 14.65
HBs-05-s-28/2740 00020 28.90 HBs-05-B-28/1930 M28 x 2.5 44 00020 25.05
HBs-05-B-28/2740 00021 31.30
HBs-05-s-32/ 400* 00021 22.25 note: Other HBS-05-S and -B lengths available upon request.
HBs-05-s-32/2170 M32 x 3 45.5 00022 32.90 DIN 13-1 thread for bar diameter of 12 to 20 mm and special threads
HBs-05-s-32/3100 00023 38.30 for bar diameters 25 mm and greater.
note: Connection with standard metric ISO thread → see page 31.
Detan
other lengths: Specify total measurement L.

5 note: Special thread *note: Note reduced load capacity resulting from reduced bar length!
HBs-05-sg HBs-05-Bg
Bent socket bars Outside dimension x Bent socket bars Outside dimension x
with threaded socket with forged socket
Dimensions needed Threaded Dimensions needed Threaded
at the time of order: plug at the time of order: plug
L = ... L = ...
framing systems
x = ... x = ...
y = ... y = ...
6 α = ...
dBR = ... α = Bending angle
α = ...
dBR = ... α = Bending angle
Note min. x and bar length Note min. x and bar length
deduction z deduction z
→ see Product Information – Technical for HBS-05 → see Product Information – Technical for HBS-05
dS/L, x, y, dBR dS/L, x, y, dBR
Bolts, accessories
[mm] 0053.220- [EUR/item] [mm] 0053.120- [EUR/item]

HBs-05-sg-12 to 32/ upon request HBs-05-Bg-12 to 28/ upon request
7 Ordering example Ordering example

HBs-05-Bg-14/1370 x = 350, y = remainder, dBR = 15dS
HBs-05-sg-12/1180 x = 1050, y = remainder, dBR = 4ds
Measurement L, bent shape, measurements x, y, dBR Measurement L, bent shape, measurements x, y, dBR
Bar diameter ds [mm] Bar diameter ds [mm]
Type Type
if not supplied at the time of order, we will supply α = 90° and dBR = 4(7) ds, if x>y or dBR ≥ 10 ds if x<y
28
H a l f e n H B s - 0 5 t R e a D e D R e i n f o R c e M e n t co n n e c t i o n s
HBs-05- a HBs-05-P

Connector bar, Can also be supplied left-hand Position sleeve, officially approved Z - 1.5 - 189
incl. threaded protective cap, thread as HBs-05-al-... Set consisting of:
officially approved Z - 1.5 - 189 • Threaded stud with nuts • Long socket
Fixed nut
Counter nut, loose
1
Installation diagram:
Item name Dimensions Screw-in Article no. Price
dS/L of thread depth
[mm] L3 [mm] 0053.030- [EUR/item]
HBs-05-a-12/ 400* 00001 3.40
HBs-05-a-12/ 610
M12 16.5
00002 3.60 2
HBs-05-a-12/ 860 00003 3.90 Item name Installation length Article no. Price
HBs-05-a-12/1180 00004 4.20 for bar diameter dS between bar
[mm] ends A [mm] 0725.050- [EUR/item]
HBs-05-a-14/ 400* 00005 4.05 HBs-05-P - 12 -set 171 ± 20.0 00001 29.55
HBs-05-a-14/ 700 00006 4.30 HBs-05-P - 14 -set 187 ± 20.0 00002 34.85
M14 19.5
HBs-05-a-14/ 990 00007 4.80 HBs-05-P - 16 -set 203 ± 20.0 00003 38.30
HBs-05-a-14/1370 00008 5.15 HBs-05-P - 20 -set 270 ± 30.0 00004 50.20
lifting systems
HBs-05-P - 25 -set 314 ± 30.5 00005 83.85
HBs-05-a-16/ 400*
HBs-05-a-16/1110 M16 22.5
00009
00010
5.00
6.00
HBs-05-P - 28 -set
HBs-05-P - 32 -set
336 ± 30.5
385 ± 34.5
00006
00007
105.35
124.30 3
HBs-05-a-16/1570 00011 6.90
HBs-05-Rl
HBs-05-a-20/ 400* 00012 5.65 Right/left-hand threaded socket,
HBs-05-a-20/1380 M20 28.5 00013 9.50 officially approved Z - 1.5 - 189
HBs-05-a-20/1960 00014 11.70

Right-hand Left-hand HBS-05-RL application example
thread thread
HBs-05-a-25/ 400* 00015 7.35
HBs-05-a-25/1730 M25 x 2.5 36.0 00016 14.65
HBs-05-a-25/2460 00017 18.35 4
HBs-05-a-28/ 400* 00018 8.90 Thread overlap area Order trapeze rail for recess suitable for
HBs-05-a-28/1930 M28 x 2.5 40.5 00019 18.80 R/L socket separately → p. 31
HBs-05-a-28/2740 00020 23.60 Item name Article no. Price
for bar diameter dS
HBs-05-a-32/ 400* 00021 13.90 [mm] 0725.010- [EUR/item]
HBs-05-a-32/2170 M32 x 3 45.5 00022 26.45 HBs-05-Rl - 12 00001 4.30
HBs-05-a-32/3100 00023 27.95 HBs-05-Rl - 14 00002 5.00
Detan
note: Other lengths available upon request. DIN 13-1 thread for bar diameters of HBs-05-Rl - 16 00003 5.70
12 to 20 mm and special threads for bar diameter 25 mm and greater. HBs-05-Rl - 20 00004 6.70 5
HBs-05- ag / alg HBs-05-Rl - 25 00005 9.25
Bent connector bars HBs-05-Rl - 28 00006 11.70
Outside dimension x
HBs-05-Rl - 32 00007 14.55
Dimensions needed
at the time of order:
HBs-05-RDZ
L = ...
Reducing socket bar,
x = ...
framing systems
y = ...
α = ...
dBR = ...
α = Bending angle
6
Note min. x and bar length
deduction z
→ see Technical Product Information Catalogue for HBS-05
Item name Article no. Price Item name Screw-in Article no. Price
dS/L, x, y, dBR Bar diameter dS1/dS2 x depth
[mm] [EUR/item] [mm] [mm] L1R [mm] 0053.420- [EUR/item]
Bolts, accessories
HBs-05-ag-12 to 32/ 0053.370 HBs-05-RDZ- 16/14- 19.5

upon request
HBs-05-alg-12 to 32/ (left-hand thread) 0053.350 HBs-05-RDZ- 20/16- 22.5 (see
Ordering example
HBs-05-alg-12/1180 x = 300, y = remainder, dBR ≥ 10dS
HBs-05-RDZ- 25/20- 28.5 ordering
example)
upon request 7
HBs-05-RDZ- 28/25- 36.0
Measurement L, bent shape, measurements x, y, dBR HBs-05-RDZ- 32/28- 40.5
Bar diameter ds [mm] Ordering example:
Type HBs-05-RDZ-20/16-1900 Article no. 0053.420 dS1/dS2 = 20/16, x = 1900
if not specified at the time of order, we will supply α = 90° and dBR = 4(7) specify length x required at the time of order
ds, if x>y or dBR ≥ 10 ds if x<y
29
H ALFEN hb s - 0 5 Thr e a d e d r e i n f o r c e m e n t co n n e c t i o n s
HBS-05-SEA HBS-05-BEA
Socket bar with end anchor, threaded socket, Socket bar with end anchor, threaded socket,
incl. threaded screw plug, officially approved Z - 1.5 - 189 incl. threaded plug, officially approved Z - 1.5 - 189
fixed fixed
1
Threaded Threaded
plug screw plug
Item name AxD Screw-in Article no. Price Item name AxD Screw-in Article no. Price
dS/x depth dS/x depth

[mm] [mm] L1 [mm] 0053.280- [EUR/item] [mm] [mm] L1 [mm] 0053.160- [EUR/item]
HBS-05-SEA - 12/ 41 x 18 16.5 HBS-05-BEA - 12/ 41 x 18 18
2 HBS-05-SEA - 14/ 46 x 20 19.5 HBS-05-BEA - 14/ 46 x 20 21
(see
HBS-05-SEA - 16/ 52 x 25 22.5 (see HBS-05-BEA - 16/ 52 x 25 24
ordering upon request
HBS-05-SEA - 20/ 64 x 30 28.5 ordering upon request HBS-05-BEA - 20/ 64 x 30 30
example)
HBS-05-SEA - 25/ 80 x 35 36.0 example) HBS-05-BEA - 25/ 80 x 35 37.5
HBS-05-SEA - 28/ 90 x 40 40.5 HBS-05-BEA - 28/ 90 x 40 42
HBS-05-SEA - 32/ 110 x 45 45.5 Ordering example:
Ordering example: HBS-05-BEA - 16/990 Article no. 0053.160 dS = 16, x = 990
HBS-05-SEA - 12/850 Article no. 0053.280 dS = 12, x = 850
Lifting systems
HBS-05-SD HBS-05-SA
3 Double socket bar, threaded sockets, Combi bar, threaded socket,
incl. threaded plugs, incl. threaded plug,
officially approved Z - 1.5 - 189 officially approved Z - 1.5 - 189
4 Item name
dS/x
Screw-in depth Article no. Price Item name
dS1/x
Screw-in depth Article no. Price
[mm] L1 [mm] 0053.230- [EUR/item] [mm] L1/L3 [mm] 0053.260- [EUR/item]

HBS-05-SD - 12/ 16.5 HBS-05-SA - 12/ 16.5
HBS-05-SD - 14/ 19.5 HBS-05-SA - 14/ 19.5
HBS-05-SD - 16/ 22.5 (see HBS-05-SA - 16/ 22.5 (see
HBS-05-SD - 20/ 28.5 ordering upon request HBS-05-SA - 20/ 28.5 ordering upon request
HBS-05-SD - 25/ 36.0 example) HBS-05-SA - 25/ 36.0 example)
HBS-05-SD - 28/ 40.5 HBS-05-SA - 28/ 40.5
DETAN
HBS-05-SD - 32/ 45.5 HBS-05-SA - 32/ 45.5

5 Ordering example: Ordering example:
HBS-05-SD - 14/430 Article no. 0053.230 dS = 14, x = 430 HBS-05-SA - 20/2300 Article no. 0053.260 dS = 20, x = 2300
HBS-05-SRZ HBS-05- ARZ

Double socket bar, with reducing sleeve at one end, threaded sockets, Combi bar, with reducing sleeve at one end, threaded sockets,
incl. threaded plugs, officially approved Z - 1.5 - 189 incl. threaded plugs, officially approved Z - 1.5 - 189
Framing systems
Item name Screw-in depth Article no. Price Item name Screw-in depth Article no. Price
dS1/dS2 - x L1 L1R dS1/dS2 - x L1R L3
[mm] [mm] [mm] 0053.440- [EUR/item] [mm] [mm] [mm] 0053.430- [EUR/item]
HBS-05-SRZ - 16/14 - 19.5 16.5 HBS-05-ARZ - 16/14 - 16.5 19.5
Bolts, accessories
HBS-05-SRZ - 20/16 - 22.5 19.5 (see HBS-05-ARZ - 20/16 - 19.5 22.5 (see
HBS-05-SRZ - 25/20 - 28.5 22.5 ordering upon request HBS-05-ARZ - 25/20 - 22.5 28.5 ordering upon request
7 HBS-05-SRZ - 28/25 - 36.0 28.5 example) HBS-05-ARZ - 28/25 - 28.5 36.0 example)
HBS-05-SRZ - 32/28 - 40.5 36.0 HBS-05-ARZ - 32/28 - 36.0 40.5
Ordering example: Ordering example:
HBS-05-SRZ - 16/14 - 950 Article no. 0053.440 dS1/dS2 = 16/14, x = 950 HBS-05-ARZ - 20/16 - 1450 Article no. 0053.430 dS1/dS2 = 20/16, x = 1450
Specify length x required at the time of order Specify length x required at the time of order
30
H ALFEN H B s - 0 5 Thr e a d e d r e i n f o r c e m e n t co n n e c t i o n s , ac c e s s o r i e s
HBS-05-SB 3905

Steel connection socket bar with DIN 13 metric thread HBS-05 plastic nail plate
incl. threaded plug
1
Item name for socket PU Article no. Price
bar Ø dS
[mm] [items] 0725.020- [EUR/item]
3905-12 12 1 00002 0.35
Item name Thread Screw-in Article no. Price 3905-14 14 1 00003 0.35
dS / L DIN 13 depth 3905-16 16 1 00004 0.35
[mm] Size L1 [mm] 0053.610- [EUR/item] 3905-20 20 1 00005 0.35
FV version: Hot-dip galvanised sleeve, reinforcement bar BSt500S anchor rod
HBS-05-SB-12/ 410-FV M16 30 00001 14.05 6306 2
HBS-05-SB-16/ 565-FV M20 40 00002 16.95 HBS-05 adhesive connector slab
HBS-05-SB-20/ 715-FV M24 45 00003 22.45 for sticking to steel formwork
HBS-05-SB-25/1025-FV M30 55 00004 34.45
SS 316 version: SS 316 stainless steel sleeve, reinforcement bar BSt500S anchor rod Item name for socket PU Article no. Price
0053.640- bar Ø dS
HBS-05-SB-12/ 410-A4 M16 30 00001 25.15 [mm] [items] 0741.100- [EUR/item]
HBS-05-SB-16/ 565-A4 M20 40 00002 33.75 6306-12 12 500 00002 0.30
Lifting systems
HBS-05-SB-20/ 715-A4 M24 45 00003 48.30 6306-16 16 500 00003 0.30
HBS-05-SB-25/1025-A4 M30 55 00004 upon request
Other lengths available upon request. Note 'l' according to calculation!
6306-20 20 500 00004 0.30
3
Other shapes can be supplied: 3916
• Bent version: HBS-05-SBG, bending cost supplements upon request HBS-05 metal nail slab,
• End anchor version: HBS-05-SBEA, for end anchor measurements see → page 30. for multiple use
HBS-05 special bolts

Item Thread Ø x L Grade Article no. Price Item name for socket PU Article no. Price
name [mm] 0725.090- [EUR/100 items] bar Ø dS
HBS-05-HSK-M25 x 25 x 55 10.9 00001 2,482.50 [mm] [items] 0725.030- [EUR/item]
HBS-05-HSK-M28 x 25 x 60 10.9 00002 2,951.70 3916-25
3916-28
25
28
1
1
00001
00002
2.00
2.00
4
HBS-05 special nuts 3916-32 32 1 00003 2.00
Item Grade Article no. Price
name 0725.080- [EUR/100 items] 3915
HBS-05-MU-25 x 2.5 10.9 00001 411.80 HBS-05 high speed wrench
HBS-05-MU-28 x 2.5 10.9 00002 501.20
HBS-TPL Item for bar Article no. Price
DETAN
name Ø [mm] 0725.040- [EUR/item]
Trapeze rail with holes for HBS-05-A bars
3915-14 12-14 00001 72.05 5
Standard-Dimensions 3915-20 16-20 00002 89.10
End cap for e ds 3915-32 25-32 00003 111.60
trapeze rail 7,5 cm 13
(ordered 10,0 cm 10
separately) 12,5 cm 8
15,0 cm 7
20,0 cm 5
Framing systems
25,0 cm 4

30,0 cm
40,0 cm
4
3 6
Use with reinforcement connection 45,0 cm 3
with HBS-05-R/L socket → see page 29.
Item name for bar Article no. Price
h/w- L Ø
[mm] [mm] 0725.060- [EUR/100 items]
Trapeze rail:
Bolts, accessories
HBS-05-TPL 35/60 - 12-20

upon request
HBS-05-TPL 50/90 - 25-32
7
End cap: 0725.070-
HBS-05-TPL-EDK 35/60 12-20 00001
upon request
HBS-05-TPL-EDK 50/90 25-32 00002
At the time of order, please specify perforations required with
measurements e, dS [mm].
For measurements dS → see pages 28 - 29. Standard length L = 100 cm.
31
H ALFEN H b s - 0 5 b ox Thr e a d e d r e i n f o r c e m e n t co n n e c t i o n s
HBS-05 box
made from steel sheet, galvanised, perforated, with inserted strip filler.
Supplied complete with HBS-05-B socket bars.
1 HBS-05 box Options:

Casing HBS-05-BG
Galvanised cover
-B
Cross-section
HBS-05 box -BEA
Foam strip
2
HBS-05-B
Socket bar
Item Box length LB Article no. Price
name [mm] 0053.500- [EUR/item]
HBS-05 box 1250 upon request
Specify the perforations required at the time of order;
hole Ø of 12, 14, 16 mm,hole spacing of 7.5-10-12.5-15-20-25 can be supplied.
Lifting systems
3 Ordering example:
HBS-05 box-1250-14/15 - 8/BG: L=800 x=200 10dS
Dimensions for socket bar

according to version shape
(also see page 28)
Reinforcement type

4 Length of box
DETAN
5
Framing systems
6
Bolts, accessories
32
h g c r e i n f o r c e m e n t co up l e r
HGC

HGC reinforcement coupler
Item for bar Ø Reduction Outer Ø x Article no. Price
name dS [mm] to [mm] Length L [mm] 0712.010- [EUR/item]
HGC 8/10 8/10 10...8 26.5 x 76 00001 28.65
HGC 12 12 12..10 31.8 x 100 00002 31.70
HGC 14 14 14...12 38.0 x 112 00003 38.95 2
HGC 16 16 16..14 38.0 x 140 00004 38.95
HGC 20 20 20...16 48.3 x 164 00005 47.80
HGC 25 25 25...20 51.0 x 216 00006 73.35
HGC 28 28 28...25/20 60.3 x 252 00007 91.55
Note: Bar Ø dS 32 + 40 on request
Assembly tools
Lifting systems
Manual tools Article no. Price
(for small volumes only)
Changeover ratchet with 3/4” connection and handle
0712.020- [EUR/item]
00101 244.30
3
Associated T60 Torx bits 3/4”
00111 64.55
for changeover ratchet for HGC 14+16
Associated T70 Torx attachments 3/4”
00112 64.55
for changeover ratchet for HGC 20
T55 Torx attachments 1/2” for standard changeover

00110 15.45
ratchet with 1/2” connection for HGC 8/10, 12
Electric tools Article no. Price

(recommended)
HGC electrical screw driver LDE-16
0712.025- [EUR/item] 4
rental set Deposit
0712.025-
incl. Torx inserts and 3,000.00
Torx bits for all diameters
Rental/day
HGC electric screw driver 00999
60.00
HGC power screw driver KSZKN-16-28 Deposit
00201
Rental tool set 600.00
HGC power screw driver KSZKN-32-40 Deposit
DETAN
00202
Rental tool set 600.00
Rental/day
5
HGC servo screw driver 00998
30.00

(provided as spare parts only) 0712.020- [EUR/item]
HGC-Torx 16 x T55 insert for HGC 8/10, 12 00007 71.75
HGC-Torx 16 x T60 insert for HGC 14, 16 00008 71.75
Framing systems
HGC-Torx 16 x T70 insert for HGC 20 00009 71.75

Upon request
3205
6
Corrosion protection
Item Article no. Price

name 0711.010- [EUR/item]
3205-01 Denso-fill paste (cartridge) 00001 18.20
Bolts, accessories
Item Article no. Price

name 0711.010- [EUR/item]
3205-02 Denso-fill paste 20kg container 00002 361.60 7
33
H a l f e n H B t R e i n f o R c e M e n t R e B e n D co n n e c t i o n s
HBt 55, HBt 85 HBt 120, HBt 150, HBt 190, HBt 220
Type tested reinforcement connection – single row Type tested reinforcement connection – double row
Type 5 standard bar

1
Type 1 standard bar
Packaging unit
Type: 120 150 190 220
Item: 48 48 48 48
Packaging unit
m: 60 60 60 60 Other lengths and types upon request
200 items = 250 m
2 Item ds/s Type Length B Article no. Price Price per metre
name [mm/cm] [mm] [mm] 0054.010- [EUR/item] [EUR/metre] Item ds/s Type Length B Article no. Price Price per metre
HBt 55 - 8/15 - 1 - 1250 58 00001 15.65 12.52 name [mm/cm] [mm] [mm] 0054.040- [EUR/item] [EUR/metre]
HBt 55 - 8/20 - 1 - 1250 58 00002 14.10 11.28 HBt 120 - 8/15 - 5 - 1250 122 00001 27.80 22.24
HBt 55 - 8/25 - 1 - 1250 58 00003 13.55 10.84 HBt 120 - 8/20 - 5 - 1250 122 00002 24.70 19.76
HBt 120 - 8/25 - 5 - 1250 122 00003 22.85 18.28
HBt 55 - 10/15 - 1 - 1250 58 00004 17.50 14.00
HBt 55 - 10/20 - 1 - 1250 58 00005 15.75 12.60 HBt 120 - 10/15 - 5 - 1250 122 00004 33.60 26.88
lifting systems
HBt 55 - 10/25 - 1 - 1250 58 00006 15.00 12.00 HBt 120 - 10/20 - 5 - 1250 122 00005 29.05 23.24
HBt 120 - 10/25 - 5 - 1250 26.65 21.32
3 HBt 85 - 10/10 - 1 - 1250 86
0054.020-
00007 23.45 18.76
122 00006
HBt 85 - 10/15 - 1 - 1250 86 00001 19.15 15.32 HBt 120 - 12/15 - 5 - 1250 122 00007 43.05 34.44
HBt 85 - 10/20 - 1 - 1250 86 00002 17.20 13.76 HBt 120 - 12/20 - 5 - 1250 122 00008 36.50 29.20
HBt 85 - 10/25 - 1 - 1250 86 00003 16.40 13.12 HBt 120 - 12/25 - 5 - 1250 122 00009 33.30 26.64
HBt 85 - 12/10 - 1 - 1250 86 00008 30.00 24.00
HBt 85 - 12/15 - 1 - 1250 86 00004 24.00 19.20 0054.050-
HBt 85 - 12/20 - 1 - 1250 86 00005 21.05 16.84 HBt 150 - 8/15 - 5 - 1250 150 00001 29.65 23.72
HBt 85 - 12/25 - 1 - 1250 86 00006 19.60 15.68 HBt 150 - 8/20 - 5 - 1250 150 00002 26.15 20.92
HBt 150 - 8/25 - 5 - 1250 150 00003 24.40 19.52
4 HBt 80 HBt 150 - 10/10 - 5 - 1250
HBt 150 - 10/15 - 5 - 1250
150
150
00010
00004
46.15
36.00
36.92
28.80
Precast reinforcement connection
HBt 150 - 10/20 - 5 - 1250 150 00005 31.15 24.92
HBt 150 - 10/25 - 5 - 1250 150 00006 28.90 23.12
HBt 150 - 12/10 - 5 - 1250 150 00011 55.55 44.44
Type 6 standard bar HBt 150 - 12/15 - 5 - 1250 150 00007 47.40 37.92
HBt 150 - 12/20 - 5 - 1250 150 00008 40.00 32.00
HBt 150 - 12/25 - 5 - 1250 150 00009 36.20 28.96
Detan
0054.060-
5 HBt 190 - 8/15 - 5 - 1250 186 00001 31.75 25.40
Packaging unit HBt 190 - 8/20 - 5 - 1250 186 00002 28.40 22.72
64 items = 80 m HBt 190 - 8/25 - 5 - 1250 186 00003 26.65 21.32
HBt 190 - 10/10 - 5 - 1250 186 00010 50.05 40.04
Item ds/s Type Length B Article no. Price Price per metre HBt 190 - 10/15 - 5 - 1250 186 00004 39.40 31.52
name [mm/cm] [mm] [mm] 0054.030- [EUR/item] [EUR/metre] HBt 190 - 10/20 - 5 - 1250 186 00005 34.45 27.56
HBt 80 - 8/15 - 1250 86 00001 26.80 21.44 HBt 190 - 10/25 - 5 - 1250 186 00006 31.65 25.32
HBt 80 - 8/20 - 1250 86 00002 22.05 17.64 HBt 190 - 12/10 - 5 - 1250 186 00011 65.50 52.40
framing systems
HBt 80 - 8/25 - 1250 86 00003 19.80 15.84 HBt 190 - 12/15 - 5 - 1250 186 00007 49.60 39.68
6 HBt 80 - 10/15 - 1250 86 00004 33.50 26.80

HBt 190 - 12/20 - 5 - 1250
HBt 190 - 12/25 - 5 - 1250
186
186
00008
00009
42.55
38.80
34.04
31.04
HBt 80 - 10/20 - 1250 86 00005 27.20 21.76
HBt 80 - 10/25 - 1250 86 00006 24.25 19.40 0054.070-
HBt 220 - 8/15 - 5 - 1250 222 00001 34.45 27.56
HBt-RZ HBt 220 - 8/20 - 5 - 1250 222 00002 30.80 24.64
Rebend gripper HBt 220 - 8/25 - 5 - 1250 222 00003 28.90 23.12
HBt 220 - 10/10 - 5 - 1250 222 00010 52.15 41.72
Bolts, accessories
HBt 220 - 10/15 - 5 - 1250 222 00004 40.90 32.72

HBt 220 - 10/20 - 5 - 1250 222 00005 36.00 28.80
7 HBt 220 - 10/25 - 5 - 1250 222 00006 33.50 26.80
Item Article no. Price HBt 220 - 12/10 - 5 - 1250 222 00011 70.00 56.00
name 0064.010- [EUR/item] HBt 220 - 12/15 - 5 - 1250 222 00007 52.50 42.00
HBt RZ - 8/10 00001 361.95 HBt 220 - 12/20 - 5 - 1250 222 00008 45.00 36.00
HBt RZ - 10/10 00002 385.40 HBt 220 - 12/25 - 5 - 1250 222 00009 41.25 33.00
34
halfen HDB shear rails
HALFEN HDB shear rail - s tandard units HDB with 2 studs with 3 studs

Punching shear Item Ø dA/hA L Article no. Price L Article no. Price
Officially approved name [mm] [mm] 0057.110- [EUR/item] [mm] 0057.110- [EUR/item]
Z-15.1-213 , HDB - 16 / 165 # 16.70 # 25.05
Z-15.1-84
Note: Clip bar for
HDB - 16 / 175
HDB - 16 / 185
#
#
16.90
16.90
#
#
25.35
25.35
1
assembly HDB - 16 / 195 # 17.00 # 25.50
→ see page 37 with 2 studs with 3 studs HDB - 16 / 205 280 00055 17.00 420 00056 25.50
Item Ø dA/hA L Article no. Price L Article no. Price HDB - 16 / 215 300 00057 17.10 450 00058 25.65
name [mm] [mm] 0057.110- [EUR/item] [mm] 0057.110- [EUR/item] HDB - 16 / 225 # 17.30 # 25.95
HDB - 10 / 125 # 12.60 # 18.90 HDB - 16 / 235 340 00059 17.50 510 00060 26.25
HDB - 10 / 135 200 00001 12.70 300 00002 19.05 HDB - 16 / 245 360 00061 17.50 540 00062 26.25
HDB - 10 / 145 200 00003 12.70 300 00004 19.05 HDB - 16 / 255 360 00063 17.50 540 00064 26.25
HDB - 10 / 155 220 00005 12.70 330 00006 19.05 HDB - 16 / 265 # 17.60 # 26.40
HDB - 10 / 165 240 00007 12.80 360 00008 19.20 HDB - 16 / 275 400 00065 17.60 600 00066 26.40 2
HDB - 10 / 175 240 00009 12.80 360 00010 19.20 HDB - 16 / 285 420 00067 17.90 630 00068 26.85
HDB - 10 / 185 280 00011 12.80 420 00012 19.20 HDB - 16 / 295 # 18.00 # 27.00
HDB - 10 / 195 280 00013 12.80 420 00014 19.20 HDB - 16 / 305 # 18.00 # 27.00
HDB - 10 / 205 280 00015 12.80 420 00016 19.20 HDB - 16 / 315 # 18.10 # 27.15
HDB - 10 / 215 300 00017 13.00 450 00018 19.50 HDB - 16 / 325 # 18.20 # 27.30
HDB - 10 / 225 # 13.10 # 19.65 HDB - 16 / 335 # 18.20 # 27.30
HDB - 10 / 235 # 13.10 # 19.65 HDB - 16 / 345 # 18.30 # 27.45
Lifting systems
HDB - 10 / 245 # 13.10 # 19.65 HDB - 16 / 355 # 18.40 # 27.60
HDB - 10 / 255 # 13.20 # 19.80
HDB - 20 / 185 # 20.40 # 30.60 3
HDB - 12 / 125 # 13.70 # 20.55 HDB - 20 / 195 # 20.40 # 30.60
HDB - 12 / 135 # 13.80 # 20.70 HDB - 20 / 205 # 20.60 # 30.90
HDB - 12 / 145 # 14.00 # 21.00 HDB - 20 / 215 # 20.90 # 31.35
HDB - 12 / 155 220 00019 14.10 330 00020 21.15 HDB - 20 / 225 # 20.90 # 31.35
HDB - 12 / 165 240 00021 14.10 360 00022 21.15 HDB - 20 / 235 340 00069 21.00 510 00070 31.50

HDB - 12 / 175 240 00023 14.20 360 00024 21.30 HDB - 20 / 245 360 00071 21.20 540 00072 31.80
HDB - 12 / 185 280 00025 14.20 420 00026 21.30 HDB - 20 / 255 360 00073 21.30 540 00074 31.95
HDB - 12 / 195 280 00027 14.20 420 00028 21.30 HDB - 20 / 265 # 21.40 # 32.10
HDB - 12 / 205
HDB - 12 / 215
280
300
00029
00031
14.20
14.40
420
450
00030
00032
21.30
21.60
HDB - 20 / 275
HDB - 20 / 285 420
#
00076
21.40
21.60 630
#
00077
32.10
32.40
4
HDB - 12 / 225 # 14.40 # 21.60 HDB - 20 / 295 440 00078 21.70 660 00079 32.55
HDB - 12 / 235 340 00033 14.50 510 00034 21.75 HDB - 20 / 305 440 00080 21.80 660 00081 32.70
HDB - 12 / 245 360 00035 14.60 540 00036 21.90 HDB - 20 / 315 # 21.90 # 32.85
HDB - 12 / 255 # 14.60 # 21.90 HDB - 20 / 325 # 22.00 # 33.00
HDB - 12 / 265 # 14.70 # 22.05 HDB - 20 / 335 # 22.00 # 33.00
HDB - 12 / 275 # 14.80 # 22.20 HDB - 20 / 345 # 22.20 # 33.30
HDB - 12 / 285 # 14.80 # 22.20 HDB - 20 / 355 # 22.40 # 33.60
DETAN
HDB - 12 / 295 # 14.80 # 22.20 HDB - 20 / 375 # 22.70 # 34.05
HDB - 12 / 305 # 14.80 # 22.20 HDB - 20 / 395 # 22.90 # 34.35 5
HDB - 20 / 405 # 24.30 # 36.45
HDB - 14 / 125 # 14.70 # 22.05 HDB - 20 / 425 # 24.60 # 36.90
HDB - 14 / 135 # 14.80 # 22.20 HDB - 20 / 435 # 24.70 # 37.05
HDB - 14 / 145 # 14.80 # 22.20 HDB - 20 / 455 # 25.00 # 37.50
HDB - 14 / 155 # 15.00 # 22.50
HDB - 14 / 165 # 15.00 # 22.50 HDB - 25 / 265 # 30.10 # 45.15
HDB - 14 / 175 # 15.10 # 22.65 HDB - 25 / 275 30.20 45.30
Framing systems
# #
HDB - 14 / 185 280 00037 15.10 420 00038 22.65 HDB - 25 / 285 # 30.40 # 45.60
HDB - 14 / 195
HDB - 14 / 205
280
280
00039
00041
15.20
15.20
420
420
00040
00042
22.80
22.80
HDB - 25 / 295
HDB - 25 / 305
#
#
30.60
30.60
#
#
45.90
45.90
6
HDB - 14 / 215 300 00043 15.30 450 00044 22.95 HDB - 25 / 325 # 30.80 # 46.20
HDB - 14 / 225 320 00045 15.30 480 00046 22.95 HDB - 25 / 335 # 31.10 # 46.65
HDB - 14 / 235 340 00047 15.50 510 00048 23.25 HDB - 25 / 345 # 31.10 # 46.65
HDB - 14 / 245 360 00049 15.50 540 00050 23.25 HDB - 25 / 355 # 31.20 # 46.80
HDB - 14 / 255 360 00051 15.50 540 00052 23.25 HDB - 25 / 375 # 31.50 # 47.25
HDB - 14 / 265 # 15.70 # 23.55 HDB - 25 / 395 # 31.80 # 47.70
Bolts, accessories
HDB - 14 / 275 # 15.80 # 23.70 HDB - 25 / 405 # 33.40 # 50.10

HDB - 14 / 285 420 00053 15.90 630 00054 23.85 HDB - 25 / 425 # 33.50 # 50.25
HDB - 14 / 295 # 15.90 # 23.85 HDB - 25 / 435 # 33.70 # 50.55 7
HDB - 14 / 305 # 16.00 # 24.00 HDB - 25 / 455 # 34.10 # 51.15
HDB - 14 / 315 # 16.10 # 24.15 For ratings according to DIN 1045-1:2001-07 officially approved Z-15,1-213.
HDB - 14 / 325 # 16.10 # 24.15 not applicable
# = Special, please use item name at the time of order. Please specify length L [mm]. Special lengths also available.
35
halfen HDB shear rails
HALFEN HDB shear rail - complete element HALFEN HDB shear rail - complete element
Type: HDB Type: HDB Note: For spacer bar and clip bar assembly
Officially approved Z-15.1-213 accessories, see → page 37
Stud dimensions: Number of studs per unit: Stud dimensions: Number of studs per unit:
1 Type Ø Height
dA hA
4
Price
5
Price
6
Price
[mm] [mm] [EUR/item] [EUR/item] [EUR/item]
HDB - 16 / 165 33.40 41.75 50.10
Type Ø Height Price Price Price HDB - 16 / 175 33.80 42.25 50.70
dA hA HDB - 16 / 185 33.80 42.25 50.70
[mm] [mm] [EUR/item] [EUR/item] [EUR/item] HDB - 16 / 195 34.00 42.50 51.00
HDB - 10 / 125 25.20 31.50 37.80 HDB - 16 / 205 34.00 42.50 51.00
HDB - 10 / 135 25.40 31.75 38.10 HDB - 16 / 215 34.20 42.75 51.30
HDB - 10 / 145 25.40 31.75 38.10 HDB - 16 / 225 34.60 43.25 51.90
2 HDB - 10 / 155 25.40 31.75 38.10 HDB - 16 / 235
HDB - 16 / 245
35.00
35.00
43.75
43.75
52.50
52.50
HDB - 10 / 165 25.60 32.00 38.40
HDB - 10 / 175 25.60 32.00 38.40 HDB - 16 / 255 35.00 43.75 52.50
HDB - 10 / 185 25.60 32.00 38.40 HDB - 16 / 265 35.20 44.00 52.80
HDB - 10 / 195 25.60 32.00 38.40 HDB - 16 / 275 35.20 44.00 52.80
HDB - 10 / 205 25.60 32.00 38.40 HDB - 16 / 285 35.80 44.75 53.70
HDB - 10 / 215 26.00 32.50 39.00 HDB - 16 / 295 36.00 45.00 54.00
HDB - 10 / 225 26.20 32.75 39.30 HDB - 16 / 305 36.00 45.00 54.00
Lifting systems
HDB - 10 / 235 26.20 32.75 39.30 HDB - 16 / 315 36.20 45.25 54.30
HDB - 10 / 245 26.20 32.75 39.30 HDB - 16 / 325 36.40 45.50 54.60
3 HDB - 10 / 255 26.40 33.00 39.60 HDB - 16 / 335 36.40 45.50 54.60
HDB - 16 / 345 36.60 45.75 54.90
HDB - 12 / 125 27.40 34.25 41.10 HDB - 16 / 355 36.80 46.00 55.20
HDB - 12 / 135 27.60 34.50 41.40
HDB - 12 / 145 28.00 35.00 42.00 HDB - 20 / 185 40.80 51.00 61.20
HDB - 12 / 155 28.20 35.25 42.30 HDB - 20 / 195 40.80 51.00 61.20
HDB - 12 / 165 28.20 35.25 42.30 HDB - 20 / 205 41.20 51.50 61.80
HDB - 12 / 175 28.40 35.50 42.60 HDB - 20 / 215 41.80 52.25 62.70
HDB - 12 / 185 28.40 35.50 42.60 HDB - 20 / 225 41.80 52.25 62.70
HDB - 12 / 195 28.40 35.50 42.60 HDB - 20 / 235 42.00 52.50 63.00
4 HDB - 12 / 205 28.40 35.50 42.60 HDB - 20 / 245 42.40 53.00 63.60
HDB - 12 / 215 28.80 36.00 43.20 HDB - 20 / 255 42.60 53.25 63.90
HDB - 12 / 225 28.80 36.00 43.20 HDB - 20 / 265 42.80 53.50 64.20
HDB - 12 / 235 29.00 36.25 43.50 HDB - 20 / 275 42.80 53.50 64.20
HDB - 12 / 245 29.20 36.50 43.80 HDB - 20 / 285 43.20 54.00 64.80
HDB - 12 / 255 29.20 36.50 43.80 HDB - 20 / 295 43.40 54.25 65.10
HDB - 12 / 265 29.40 36.75 44.10 HDB - 20 / 305 43.60 54.50 65.40
HDB - 12 / 275 29.60 37.00 44.40 HDB - 20 / 315 43.80 54.75 65.70
HDB - 12 / 285 29.60 37.00 44.40 HDB - 20 / 325 44.00 55.00 66.00
DETAN
HDB - 12 / 295 29.60 37.00 44.40 HDB - 20 / 335 44.00 55.00 66.00
5 HDB - 12 / 305 29.60 37.00 44.40 HDB - 20 / 345 44.40 55.50 66.60
HDB - 20 / 355 44.80 56.00 67.20
HDB - 14 / 125 29.40 36.75 44.10 HDB - 20 / 375 45.40 56.75 68.10
HDB - 14 / 135 29.60 37.00 44.40 HDB - 20 / 395 45.80 57.25 68.70
HDB - 14 / 145 29.60 37.00 44.40 HDB - 20 / 405 48.60 60.75 72.90
HDB - 14 / 155 30.00 37.50 45.00 HDB - 20 / 425 49.20 61.50 73.80
HDB - 14 / 165 30.00 37.50 45.00 HDB - 20 / 435 49.40 61.75 74.10
HDB - 14 / 175 30.20 37.75 45.30 HDB - 20 / 455 50.00 62.50 75.00
Framing systems
HDB - 14 / 185 30.20 37.75 45.30

HDB - 25 / 265 60.20 75.25 90.30
6 HDB - 14 / 195
HDB - 14 / 205
30.40
30.40
38.00
38.00
45.60
45.60 HDB - 25 / 275 60.40 75.50 90.60
HDB - 14 / 215 30.60 38.25 45.90 HDB - 25 / 285 60.80 76.00 91.20
HDB - 14 / 225 30.60 38.25 45.90 HDB - 25 / 295 61.20 76.50 91.80
HDB - 14 / 235 31.00 38.75 46.50 HDB - 25 / 305 61.20 76.50 91.80
HDB - 14 / 245 31.00 38.75 46.50 HDB - 25 / 325 61.60 77.00 92.40
HDB - 14 / 255 31.00 38.75 46.50 HDB - 25 / 335 62.20 77.75 93.30
HDB - 14 / 265 31.40 39.25 47.10 HDB - 25 / 345 62.20 77.75 93.30
Bolts, accessories
HDB - 14 / 275 31.60 39.50 47.40 HDB - 25 / 355 62.40 78.00 93.60
HDB - 14 / 285 31.80 39.75 47.70 HDB - 25 / 375 63.00 78.75 94.50
7 HDB - 14 / 295
HDB - 14 / 305
31.80
32.00
39.75
40.00
47.70
48.00
HDB
HDB
-
-
25
25
/
/
395
405
63.60
66.80
79.50
83.50
95.40
100.20
HDB - 14 / 315 32.20 40.25 48.30 HDB - 25 / 425 67.00 83.75 100.50
HDB - 14 / 325 32.20 40.25 48.30 HDB - 25 / 435 67.40 84.25 101.10
Ordering HDB - 14 - 4 - 235 - ... HDB - 25 / 455 68.20 85.25 102.30
Length of flat steel
example:
Type diam. dA No. of studs Stud height hA (nominal measurement)
36
H a l f e n s H e a R R a i l s , ac c e s s o R i e s
HDB aBs t HDB clip

Spacer Ks = plastic Clip bar can be attached to Usage:
for installation of any point on the assembly
HDB assembly, We recommend plan- bar of HDB-/HDB-S
e.g. in slabs: ning for two spacers
per HDB-/HDB-S unit
units.
1
Cnom is the nominal measurement
of the bottom concrete cover As a rule, we recommend theoretically
planning 2 clip bars per HDB unit.
Item Cnom h Article no. Price
name [mm] [mm] 0066.010- [EUR/item] Item Article no. Price
HDB aBst - 15 15 00001 0.30 name 0066.020- [EUR/item]
HDB aBst - 20 15 00001 0.30 HDB clip 35/3x275 00001 1.05
HDB aBst - 25 20 00002 0.30
HDB aBst - 30 25 00003 0.30 2
HDB aBst - 35 30 00004 0.30
HDB aBst - 40 35 00005 0.30
HDB aBst - 45 40 00006 0.30
h measurement marking on spacer bar
fen HDB-f shear rail

Punching shear for slabs,
lifting systems
officially approved
Z-15.1-213
3
Especially for the precast
concrete industry, we can
supply complete units
with 2 to 6 anchors and a
temporary means of securing
their position in the slabs.

Item dA/ Article no. Price
name [mm] 0057.050- [EUR/item]
HDB - f - 10/
HDB - f - 12/
4
HDB - f - 14/ upon request
HDB - f - 16/
HDB - f - 20/
Explanation: Stud height hA, no. of studs, element length L, stud spacing
L A1-L An, under concrete cover Cnom, see ordering diagram:
HDB - f - da / ha - na / l - (l a1 + l a2 + ... + l an) -Cnom

Stud diameter
Detan
Stud height [mm]
No. of studs [items]
5
Total length [mm]
Chain tape [mm]
Bottom concrete cover [mm]
For ratings according to DIN 1045-1:2001-07 officially approved Z-15.1-213

framing systems
6
Bolts, accessories
37
h a l F e n hbb b i - t r a p e z - b ox ®
HBB-F for precas t landings HBB-O for concrete landings made on site
Type HBB-F Type HBB-O

incl. bi-Trapez Layer® incl. bi-Trapez Layer® and cardboard
strips, 1 polystyrene rigid foam body
1 and 4 special nails

2 landing Inside dimensions [items] landing External dimensions [items]
thickness [cm] - type hxwxd [mm] 0970.010- [EUR/item] thickness [cm] - type hxwxd [mm] 0970.020- [EUR/item]
HBB 16 - F 160x250x140 24 00001 55.15 HBB 16 - O 187x274x155 20 00001 64.00
HBB 18 - F 180x250x140 24 00002 61.90 HBB 18 - O 207x274x155 20 00002 67.45
HBB 20 - F 200x250x140 24 00003 68.75 HBB 20 - O 227x274x155 20 00003 71.00
HBB-FQ for precas t landings HBB-OQ mixed concrete landings made on site
Type HBB-FQ Type HBB-OQ
Lifting systems
incl. 2 x bi-Trapez Layer® incl. 2 x bi-Trapez Layer® and card-
3 for additional lifting loads board strips, 1 polystyrene rigid

foam body and 4 special nails; for
additional lifting loads

landing Inside dimensions [items] landing External dimensions [items]
thickness [cm] - type hxwxd [mm] 0970.010- [EUR/item] thickness [cm] - type h x w x d [mm] 0970.020- [EUR/item]
HBB 16 - FQ 160x250x140 24 00004 66.95 HBB 16 - OQ 187x274x155 20 00004 67.10
HBB 18 - FQ 180x250x140 24 00005 68.85 HBB 18 - OQ 207x274x155 20 00005 69.70
HBB 20 - FQ 200x250x140 24 00006 70.65 HBB 20 - OQ 227x274x155 20 00006 73.20
HBB-FQS for precas t landings HBB-OQS mixed concrete landings made on site
DETAN
5 Type HBB-FQS
incl. 4 x bi-Trapez Layer®
Type HBB-OQS
incl. 4 x bi-Trapez Layer® and card-
for additional lifting board strips, 1 polystyrene rigid
and side loads foam body and 4 special nails; for
additional lifting and side loads
Framing systems
6
landing Inside dimensions [items] Item name PU
External dimensions Article no. Price
thickness [cm] - type hxwxd [mm] 0970.010- [EUR/item] landing [items]
h x w x d [mm] [EUR/item]
HBB 16 - FQS 160x250x140 24 00007 76.05 thickness [cm] - type 0970.020-
HBB 18 - FQS 180x250x140 24 00008 78.50 HBB 16 - OQS 187x274x155 20 00007 upon request
HBB 20 - FQS 200x250x140 24 00009 79.80 HBB 18 - OQS 207x274x155 20 00008 79.40
Bolts, accessories
PU [items] = packaging unit [items] HBB 20 - OQS 227x274x155 20 00009 86.25
38
h a l F e n hbb b i - t r a p e z - b ox ®
HBB-T (bi-Trapez-Box ® incl. HBB suppor t anchors ...) HBB support elem./HBB support elem. Q - concrete C35/45

Type HBB-T support unit Type HBB support unit Type HBB support unit Q for
for installation on site; additional lifting loads
additional scope
also available as HBB-O
1
2
Item name for landing PU Article no. Price
thickness [items]
[mm] 0970.040- [EUR/item]
HBB support unit 16 ≥ 160 4 00001 70.80
HBB support unit 18 ≥ 180 4 00002 70.80
HBB support unit 20 ≥ 200 4 00003 70.80
Lifting systems
landing thickness [items] HBB support unit 16-Q ≥ 160 4 00004 75.05
thickness [cm] - type
HBB 16 - T
[mm]
≥ 160 20
0970.030-
00001
[EUR/item]
128.95
HBB support unit 18-Q
HBB support unit 20-Q
≥ 180
≥ 200
4
4
00005
00006
75.05
75.05 3
HBB 18 - T ≥ 180 20 00002 135.70
HBB 20 - T ≥ 200 20 00003 142.50 HBB reinforcement cage/HBB reinforcement cage Q
Type HBB reinforcement cage Type HBB reinforcement cage Q
HBB-TQ (bi-Trapez-Box ® incl. HBB support unit ... Q) for additional lifting loads

Type HBB-TQ support unit
for installation on site;
additional scope also available
as HBB-OQ, for additional
lifting loads
4

thickness [items]
DETAN
[mm] 0970.050- [EUR/item]
HBB reinforcement cage 16 ≥ 160 4 00001 40.45 5
HBB reinforcement cage 18 ≥ 180 4 00002 40.45
HBB reinforcement cage 20 ≥ 200 4 00003 40.45
HBB reinforcement cage 16-Q ≥ 160 4 00004 44.85

HBB reinforcement cage 18-Q ≥ 180 4 00005 44.85
Item name for landing PU Article no. Price HBB reinforcement cage 20-Q ≥ 200 4 00006 44.85
landing thickness [items]
Framing systems
thickness [cm] - type [mm] 0970.030- [EUR/item]

HBB 16 - TQ
HBB 18 - TQ
≥ 160
≥ 180
20
20
00004
00005
131.20
137.90
6
HBB 20 - TQ ≥ 200 20 00006 144.75
Bolts, accessories
39
h a l F e n SO U N D INS U LATION P R O D U CTS
HTT Impact Sound insulation Element Continuation of the left column

For the connection of a cast in-situ concrete stairway HTT - 6 - 16 - 120 20 00101 83.35
to a cast in-situ landing platform HTT - 6 - 17 - 120 20 00102 83.35
Load range 4 HTT - 6 - 18 - 120 20 00103 90.45
1 HTT - 6
HTT - 6
- 19
- 20
- 120
- 120
20
20
00104
00105
90.45
97.85
HTT - 6 - 21 - 120 20 00106 97.85
HTT - 6 - 22 - 120 20 00107 97.85
HTT - 6 - 23 - 120 20 00108 103.45
HTT - 6 - 24 - 120 20 00109 103.45
HTT - 6 - 25 - 120 20 00110 103.45
0971.029
Item name PU Article no. Price HTT - 6 - special length 1 00001
Load- Floor length [items] We invoice a surcharge of € 2.00 per started 10 cm for special
2 range thickness [cm] [cm] 0971.010- [EUR/item] lengths (90 - 200 cm) that deviate from our standard lengths.
HTT - 4 - 16 - 100 20 00001 71.50
HTT - 4 - 17 - 100 20 00002 71.50 HTT Impact Sound Insulation Element
HTT - 4 - 18 - 100 20 00003 75.15 For the connection of a cast in-situ concrete stairway
HTT - 4 - 19 - 100 20 00004 75.15 to a cast in-situ landing platform
HTT - 4 - 20 - 100 20 00005 78.70 Load range 8
HTT - 4 - 21 - 100 20 00006 78.70
HTT - 4 - 22 - 100 20 00007 78.70
Lifting systems
HTT - 4 - 23 - 100 20 00008 84.35
3 HTT - 4
HTT - 4
- 24
- 25
- 100
- 100
20
20
00009
00010
84.35
84.35
HTT - 4 - 16 - 120 20 00101 75.45

HTT - 4 - 17 - 120 20 00102 75.45
HTT - 4 - 18 - 120 20 00103 79.10 Item name PU Article no. Price
HTT - 4 - 19 - 120 20 00104 79.10 Load- Floor length [items]
HTT - 4 - 20 - 120 20 00105 82.65 range thickness [cm] [cm] 0971.030- [EUR/item]
HTT - 4 - 21 - 120 20 00106 82.65 HTT - 8 - 16 - 100 20 00001 89.15
HTT - 4 - 22 - 120 20 00107 82.65 HTT - 8 - 17 - 100 20 00002 89.15
4 HTT - 4
HTT - 4
- 23
- 24
- 120
- 120
20
20
00108
00109
88.30
88.30
HTT - 8
HTT - 8
- 18
- 19
- 100
- 100
20
20
00003
00004
97.85
97.85
HTT - 4 - 25 - 120 20 00110 88.30 HTT - 8 - 20 - 100 20 00005 105.90
0971.019 HTT - 8 - 21 - 100 20 00006 105.90
HTT - 4 - special length 1 00001 HTT - 8 - 22 - 100 20 00007 105.90
We invoice a surcharge of € 2.00 per started 10 cm for special HTT - 8 - 23 - 100 20 00008 111.50
lengths (90 - 200 cm) that deviate from our standard lengths. HTT - 8 - 24 - 100 20 00009 111.50
HTT - 8 - 25 - 100 20 00010 111.50
HTT Impact Sound Insulation Element
DETAN
HTT - 8 - 16 - 120 20 00101 93.10

5 For the connection of a cast in-situ concrete stairway
to a cast in-situ stairhead. HTT - 8 - 17 - 120 20 00102 93.10
Load range 6 HTT - 8 - 18 - 120 20 00103 101.80
HTT - 8 - 19 - 120 20 00104 101.80
HTT - 8 - 20 - 120 20 00105 109.85
HTT - 8 - 21 - 120 20 00106 109.85
HTT - 8 - 22 - 120 20 00107 109.85
HTT - 8 - 23 - 120 20 00108 115.45
Framing systems
HTT - 8 - 24 - 120 20 00109 115.45

HTT - 8 - 25 - 120 20 00110 115.45
6 Item name PU Article no. Price HTT - 8 - special length 1

0971.039
00001
Load- Floor length [items] We invoice a surcharge of € 2.00 per started 10 cm for special
range thickness [cm] [cm] 0971.020- [EUR/item] lengths (90 - 200 cm) that deviate from our standard lengths.
HTT - 6 - 16 - 100 20 00001 79.40
HTT - 6 - 17 - 100 20 00002 79.40
HTT - 6 - 18 - 100 20 00003 86.55
HTT - 6 - 19 - 100 20 00004 86.55
Bolts, accessories
HTT - 6 - 20 - 100 20 00005 93.95

HTT - 6 - 21 - 100 20 00006 93.95
7 HTT - 6 - 22 - 100 20 00007 93.95
HTT - 6 - 23 - 100 20 00008 99.50
HTT - 6 - 24 - 100 20 00009 99.50
HTT - 6 - 25 - 100 20 00010 99.50
Continuation: see right column
PU [items] = packaging unit [item]
40
h a l F e n SO U N D INS U LATION P R O D U CTS
HTF Impact Sound Insulation Element for HTF -B for pre-cas t s tair base

pre-cast stair ways Impact sound insulation element for pre-cast stairs
For the placing of a pre-cast stair flights onto a for mounting a pre-cast stair flight onto the
console in the landing platforms (stairheads) base plate in the lowest storey
1
length [cm] [items] 0972.010 [EUR/item] Maße [items] 2
HTF - 100 20 00001 24.30 [cm] 0973.010 [EUR/item]
HTF - 120 20 00002 30.00 HTF - B - 125 x 55 5 00001 51.25
HTF - B - 125 x 80 5 00002 54.85
HTF insulation s trips 100 HTF - B - 145 x 55 5 00003 54.85
For the placing of a pre-cast stair flight HTF - B - 145 x 80 5 00004 56.75
onto a console in the stair head
HTPL-10 for pre-cas t s tair side panel
Lifting systems
Impact sound insulation plate
Separation at the side between the stair flight and the
stairwell wall
3

length [cm] [items] 0972.020 [EUR/item]
HT Finsulating strips 100 20 00001 20.25
HTF bedding s trip 100 Item name Breite d PU Article no. Price
4
For the placing of a pre-cast stair flight onto a length [cm] [cm] [mm] [items] 0974.010 [EUR/item]
console in the stair head HTPL - 100 35 10 45 A 00001 12.65
Material: d = 10 mm with fire protection requirement B2
Halfen Adhesive Tape 50mm

For the placing of a pre-cast stair flight
onto a console in the stair head
DETAN
Item name PU Article no. Price 5
Breite [mm] [items] 9602.040 [EUR/item]
Halfen adhesive tape 50mm 1 A 00054 5.35
Item name PU Article no. Price PU [items] = packaging unit [item]
length [cm] [items] 0972.020 [EUR/item]
HT Bedding strips 100 20 00002 22.35
Framing systems
6
Bolts, accessories
41
h a l f e n H CC co lum n s h o e
HCC and HCC M HAB H and HAB MH

HALFEN column shoe HALFEN anchor bolt, headed anchor bolt

including 2 nuts + 2 washers
HAB MH
1
HAB H Anchor
arrangement:
triple
2
quadruple
Item name l Number Article no. Price

suitable for Ø anchor rods
Item name Article no. Price Ø d3 [mm] [mm] d1 [mm] 0951.010- [EUR/item]
suitable for HAB Ø d3 - L HAB H16 280 1, diam. 16 00001 6.80
Lifting systems
[mm] [mm] 0950.010- [EUR/item] HAB H20 350 1, diam. 20 00002 8.20
3 HCC 16- 640

HCC 20- 830
00001
00002
12.10
15.40
HAB H24
HAB H30
430
500
1, diam. 25
1, diam. 32
00003
00004
11.10
16.35
HCC 24- 905 00003 25.35 HAB H39 700 1, diam. 40 00005 37.95
HCC 30- 1100 00004 44.70 0951.030-
HCC 39- 1450 00005 91.50 HAB MH30-(36) 755 4, diam. 20 00003 32.65
HAB MH36 755 4, diam. 20 00004 47.00
HCC M30-1650 00006 73.35 HAB MH39 880 3, diam. 25 00005 83.00
HCC M36-1650 00007 108.30 HAB MH45 980 4, diam. 25 00006 108.15
HCC M39-1650 00008 127.10 HAB MH52 1160 4, diam. 32 00007 195.25
HCC M45-2070 00009 190.30
4 HCC M52-2290 00010 289.70 HAB S and HAB MS
HALFEN anchor bolt, straight anchor bolt
Assembly cap including 2 nuts + 2 washers
The steel assembly cap protects the
Sketch of HCC MKA HAB MS
thread of the anchor bolt during
installation HAB S
assembly, therefore preventing damage
HAB
DETAN
5 Item name Article no. Price Anchor

suitable for Ø d3 arrangement:
[mm] 0952.060- [EUR/item]
HCC MKA-16 00001 6.60
HCC MKA-20 00002 7.85 triple
HCC MKA-24 00003 8.85
HCC MKA-30 00004 10.45
Framing systems
HCC MKA-36 00005 12.00 quadruple

HCC MKA-39 00006 12.95
6 HCC MKA-45
HCC MKA-52
00007
00008
15.00
17.05 Item name l Number Article no. Price
Note: For recess former, fixing set and assembly frame assembly accessories, suitable for Ø anchor rods
→ see page 43. Ø d3 [mm] [mm] d1 [mm] 0951.020- [EUR/item]
HAB S16 970 1, diam. 16 00001 8.75
HAB S20 1170 1, diam. 20 00002 10.80
HAB S24 1360 1, diam. 25 00003 16.10
HAB S30 1660 1, diam. 32 00004 28.70
Bolts, accessories
HAB S39 1980 1, diam. 40 00005 54.75

0951.040-
7 HAB MS30-(36) 1265 4, diam. 20 00003 37.00
HAB MS36 1265 4, diam. 20 00004 49.40
HAB MS39 1415 3, diam. 25 00005 88.15
HAB MS45 1605 4, diam. 25 00006 116.60
HAB MS52 1670 4, diam. 32 00007 200.95
42
h a l f e n H CC co lum n s h o e ; s pac e r s y s t e m
Recess former 2100

Plastic triangular strip
1
Recess former for Recess former for
column cover HCC A1 column edge HCC A2 Item Edge length a/c length Pack. unit Article no. Price
name [mm] [m] [m] 0715.020- [EUR/100 m]
Item name Article no. Price 2100-10RV 10/14 2.5 300 00001 76.20
suitable for Ø d3 2100-10RH 10/14 2.5 300 00002 56.00
[mm] 0952.010- [EUR/item] 2100-15RH 15/21 2.5 125 00003 79.00
HCC A1 - 16 00001 1.00 2100-20RH 20/28 2.5 125 00004 104.95
HCC A1 - 20 00002 1.10 RV = solid section RH = hollow section
HCC A1 - 24 00003 1.20 2
HCC A1 - 30 00004 1.50 2110
HCC A1 - 39 00005 2.00 Plastic triangular strip with attachment lip
HCC A1-M30 00006 1.50
HCC A1-M36 00007 2.00
HCC A1-M39 00008 2.25
HCC A1-M45 00009 2.50
HCC A1-M52 00010 2.90
Lifting systems
0952.020- Item Dim. a/b/c/d/ length PU Article no. Price
HCC A2 - 16
HCC A2 - 20
00001
00002
1.00
1.10
name
2110-05W
[mm]
5/12/7/2.5
[m]
2.5
[m]
150
0715.030-
00001
[EUR/100 m]
86.25 3
HCC A2 - 24 00003 1.20 2110-07R 7/13/10/2.7 2.5 100 00002 69.00
HCC A2 - 30 00004 1.50 2110-10R 10/20/15/4.1 2.5 100 00003 102.05
HCC A2 - 39 00005 2.00 2110-10RF 10/20/15/3.8 2.5 100 00004 102.05
HCC A2-M30 00006 2.00 2110-15R 15/20/21/3.8 2.5 100 00005 158.15
HCC A2-M36 00007 2.15 2110-20R 20/20/28/4.4 2.5 100 00006 228.60

HCC A2-M39 00008 2.50 2125-10R 10/15/15/2.1 2.5 100 00007 83.35
HCC A2-M45 00009 3.75 2126-10R 10/15/15/3.2 2.5 100 00008 83.35
HCC A2-M52 00010 4.00 W = soft PVC for gluing; R = standard version for manual nailing; RF = standard
Connection set
version suitable for automatic nailing tool
4
Connection set HCC-Fix for securing 2030
the column shoe to the formwork Steel triangular strip
Sketch of
M16 thread installation
Item Dim. a/b/c PU Article no. Price
DETAN
name [mm] [m] 0715.010- [EUR/100 m]
Item name Article no. Price 2030-07 7/10 100 00001 283.20 5
suitable for 2030-10 10/14 100 00002 293.30
HCC type 0952.090- [EUR/item] 2030-15 15/21 50 00003 940.15
HCC fix type 16 00001 16.55
HCC fix type 20 00002 18.15 2130
HCC fix type 24 00003 20.30 Double triangular strip made from soft PVC
HCC fix type 30 00004 23.45
HCC fix type 39/M36/M39 00005 31.00
Framing systems
HCC fix type M30 00006 27.80

HCC fix type M45
HCC fix type M52
00007
00008
41.50
45.95 Item Dim. a/b/c/d/ length PU Article no. Price
6
name [mm] [m] [m] 0715.040- [EUR/100 m]
Assembly frame 2130-10 10/25/15/4 2.5 100 00001 217.10
Steel assembly frame for precise
installation of HALFEN HAB anchor Sketch of
bolt in the foundations. installation
Special sized items available upon request.
Bolts, accessories
7
0952.089- [EUR/item]
HCC MRA-SK assembly frame 00001 upon request
43
s pac e r s y s t e m
1560
Rapid
1
Item Concrete cover Rod Ø PU Article no. Price
name [mm] [mm] [items] 0716.050- [EUR/1000 items]
1560- 6-15 15 4-6 1000 00001 28.70
1560- 8-15 15 6-8 1000 00005 28.70
1560-10-15 15 8-10 1000 00010 28.70

1560-12-15 15 10-12 1000 00015 28.70
2 1560- 6-20 20 4-6 1000 00002 43.15

1560- 8-20 20 6-8 1000 00006 43.15
1560-10-20 20 8-10 1000 00011 43.15
1560-12-20 20 10-12 1000 00016 43.15
3060
Stacking separator with hooks, splitable
Lifting systems
3
Item Dimensions Slab PU Article no. Price
name [mm] thickness [mm] [items] 0716.130- [EUR/1000 items]
3060 175x63 13 100 00001 661.25
3070
Shim
Item Dimensions Thickness PU Article no. Price

name [mm] [mm] [items] 0716.140- [EUR/1000 items]
3070- 772 70x70 2 1000 00001 57.50
3070- 773 70x70 3 500 00002 86.25
3070- 775 70x70 5 500 00003 129.35
DETAN
3070-7710 70x70 10 250 00007 330.65

5
3050, 3010
Cover cap Sealing plug
3050 3010
Item for PU Article no. Price

Framing systems
name Thread [items] 0716.120- [EUR/1000 items]
6 3050-10
3050-12
M 10
M 12
1000
1000
00001
00002
71.90
71.90
3050-16 M 16 1000 00003 86.25
3050-20 M 20 1000 00004 86.25
3050-24 M 24 1000 00005 129.35
3050-27 M 27 1000 00006 143.80
for tube inner Ø
[mm] 0716.110-
Bolts, accessories
3010-10 10 1000 00001 14.40

3010-13 13 1000 00002 14.40
7 3010-18 18 1000 00003 28.70
3010-20 20 1000 00004 28.70
3010-22 22 1000 00005 28.70
3010-26 26 1000 00006 43.15
44
H ALFEN ST U D CONNECTO R H SC
HSC-S HSC- A

Female bar, single headed, Male bar, single-headed,
approved by German building inspectorate approved by German building inspectorate
Z - 15.6 - 204 or Z - 15 - 189 Z - 15.6 - 204, or Z - 1.5 - 189
1
Material: Material:
L reinforcement steel L reinforcement steel
BSt 500S BSt 500S
ds
ds
Type - bar - ∅ ds / length L [mm] 0060. [EUR/item] Type - bar - ∅ ds / length L [mm] 0060. [EUR/item] 2
HSC - S - 16 / ... 310 upon request HSC - A - 16 / ... 410 upon request
Please quote required length L (mm) when ordering. Please quote required length L (mm) when ordering.
Observe minimum component dimensions acc. to approval. Observe minimum component dimensions acc. to approval.
Lifting systems
HSC-H HSC-HD
Sigle-head bar, Double-headed bar, 3
approved by German building inspectorate approved by German building inspectorate
Z - 15.6 - 204 Z - 15.6 - 204

Material: Material:
L reinforcement steel L reinforcement steel
BSt 500S BSt 500S
4
ds
ds
Type - bar - ∅ ds / length L [mm] 0060. [EUR/item] Type - bar - ∅ ds / length L [mm] 0060. [EUR/item]
HSC - H - 16 / ... 110 upon request HSC - HD - 16 / ... 210 upon request
Please quote required length L (mm) when ordering. Please quote required length L (mm) when ordering.
Observe minimum component dimensions acc. to approval. Observe minimum component dimensions acc. to approval.
DETAN
5
HSC-SD Nailing and Magnetic Plates
Double-headed female bar, Plastic nailing plate Magnetic plate
approved by German building inspectorate
Z - 1.5 - 189
L
Framing systems
Material:
reinforcement steel
BSt 500S
6
ds
3916 Steel nailing plate (not illustrated)

Item name For bar- ∅ D H Article no. Price
Item name Article no. Price ds [mm] [mm] [mm] 0725. [EUR/item]
Typ Stab - ∅ ds / length L [mm] 0060. [EUR/item] 3905 - 16 16 60 10 020-00004 0.35
Bolts, accessories
HSC - SD - 16 / ... 510 upon request 3905 - 20 20 60 10 020-00005 0.35

HSC - SD - 20 / ... 520 upon request 3916 - 25 25 – 9 030-00001 2.00
HSC - SD - 25 / ... 530 upon request 0741. 7
Please quote required length L (mm) when ordering. 6365 - 16 16 40 12 180-00002 94.80
Observe minimum component dimensions acc. to approval 6365 - 20 20 55 12 180-00003 98.95
45
H a l f e n S H EA R D OW EL H S D
Heav y - dut y shear dowel HSD - CRET Fire protec tion pad HSD - F - CRET
Longitudinally adjustable sleeve For heavy-duty shear dowel HSD-CRET and HSD_CRET_V
1
Item name Dowel-Ø Article no. Price Item name Thickness For sleeve Width/Height Article no. Price
2 [mm] 0730.010- [EUR/item] t b/h
SS 316 = stainless steel W 1.4462 / 1.4404 (A4) [mm] HSD-CRET [mm] 0730.320- [EUR/item]
HSD-CRET 122 22 00001 81.65 20 00001 5.05
HSD-F-CRET 122 122 120/120
HSD-CRET 124 24 00002 103.30 30 00002 5.45
HSD-CRET 128 28 00003 142.85 20 00003 5.55
HSD-F-CRET 124 124 130/130
HSD-CRET 134 34 00004 303.60 30 00004 6.00
HSD-CRET 140 40 00005 413.15 20 00005 6.80
HSD-F-CRET 128 128 140/140
30 00006 7.65
Lifting systems
Heavy-duty shear dowel HSD-CRET-V 20 00007 9.45

HSD-F-CRET 134 132 160/180
3 Longitudinally and transversely adjustable sleeve 30
20
00008
00009
10.10
10.45
HSD-F-CRET 140 140 180/220
30 00010 11.20
0730.330-
20 00001 5.95
HSD-F-CRET 122 V 122 V 150/150
30 00002 6.20
20 00003 6.10
HSD-F-CRET 124 V 124 V 160/160

30 00004 6.50
20 00005 9.05
HSD-F-CRET 128 V 128 V 170/170
30 00006 9.30
4 HSD-F-CRET 134 V
20
30
132 V 190/190
00007
00008
10.50
11.85
Item name Dorn-Ø Article no. Price 20 00009 12.35
HSD-F-CRET 140 V 140 210/220
[mm] 0730.020- [EUR/item] 30 00010 14.70
SS 316 = stainless steel W 1.4462 / 1.4404 (A4)
HSD-CRET 122 V 22 00001 110.25
HSD-CRET 124 V 24 00002 132.70
HSD-CRET 128 V 28 00003 185.35
HSD-CRET 134 V 34 00004 395.15
DETAN
HSD-CRET 140 V 40 00005 478.90

5
Framing systems
6
Bolts, accessories
46
H a l f e n s H e a R D oW e l H s D
single shear dowel HsD-D sleeves HsD-P

For HSD-P, -S and -SV sleeves For single shear dowel HSD-D
Item name Dowel-Ø Article no. Price
[mm] 0729.030- [EUR/item]
Item name length Dowel-Ø Article no. Price Type: longitudinally adjustable sleeve, plastic
HsD-P 20 20 00001 2.95
2
L d
[mm] [mm] 0729.010- [EUR/item] HsD-P 22 22 00002 2.95
Type: S 355 hot galvanised HsD-P 25 25 00003 3.05
HsD-D 20 fV 300 20 00001 3.95 HsD-P 30 30 00004 3.35
HsD-D 22 fV 300 22 00002 5.25
HsD-D 25 fV 300 25 00003 8.45 single shear dowel HsD-D with sleeve HsD-s
HsD-D 30 fV 350 30 00004 13.10 Longitudinally adjustable sleeve with single shear dowel
lifting systems
0729.020-
ss 316 = stainless steel
HsD-D 20 a4 300 20 00001 9.20 3
HsD-D 22 a4 300 22 00002 12.00
HsD-D 25 a4 300 25 00003 16.80
HsD-D 30 a4 350 30 00004 27.70
fire protec tion pad HsD - f

For single shear dowels HSD-D and HSD-SET
Item name Dorn-Ø

d
Article no. Price
4
[mm] 0729.110- [EUR/item]
Type: ss 316 Stainless steel dowel: longitudinally adjustable sleeve, stainless steel ss 304
HsD-set 20 - a4 20 00001 21.25
HsD-set 22 - a4 22 00002 25.60
HsD-set 25 - a4 25 00003 32.95
HsD-set 30 - a4 30 00004 49.00
single shear dowel HsD-D with sleeve HsD-sV
Detan
Item name Thickness For sleeve Width/Height Article no. Price Longitudinally and transversely adjustable sleeve with 5
t b/h single shear dowel
[mm] HSD-CRET [mm] 0730.300- [EUR/item]
20 00001 6.55
HsD-f- 20 S 20
30 00002 6.90
20 00003 6.85
HsD-f- 22 S 22
30 00004 7.35
110/110
framing systems
20 00005 7.60
HsD-f- 25 S 25
30 00006 7.85
HsD-f- 30
20
30
S 30
00007
00008
8.30
9.00
6
0730.310- Item name Dowel-Ø Article no. Price
20 00001 7.30 d
HsD-f- 20 V SV 20
30 00002 7.55 [mm] 0729.120- [EUR/item]
20 00003 7.85 Type: SS 316 Stainless steel dowel : longitudinally and
HsD-f- 22 V SV 22
30 00004 8.10 transversely adjustable sleeve, stainless steel ss 304
160/110
20 00005 8.65 HsD-set 20 V- a4 20 00001 30.75
Bolts, accessories
HsD-f- 25 V SV 25
30 00006 9.20 HsD-set 22 V- a4 22 00002 37.70
20 00007 9.30 HsD-set 25 V- a4 25 00003 45.70
HsD-f- 30 V
30
SV 30
00008 10.00 HsD-set 30 V- a4 30 00004 68.90 7
47
Lifting systems
1
Features Benefits
▪ Anchors made from special Saves time and money

high grade steel

No possible confusion
2 ▪ Rapid engagement and release of between the different load
anchors and lifting devices groups
▪ Load capacities up to Anchors can also be sup-

45 tonnes per anchor plied in hot-dip galvanised
and stainless steel variants
Lifting systems
DEHA spherical head
3 lifting anchor system

KKA
Features Benefits
DETAN
5 ▪ Rapid engagement and release of Saves time and money

anchors and lifting devices
No possible confusion
▪ Remot release system can be used between the different
load groups
▪ Especially applicable for the erection
Framing systems
of pre - cast elements anchors can also be sup-

6 ▪ Load capacities from 0.7 up to plied in hot-dip galvanised
26.00 tonnes version
FR
FRIMEDA transport
Tr
anchor system
TPA
Bolts, accessories
TPA
7
48
Lifting systems

1
Features Benefits
▪ Smaller socket diameter combined with Sockets and lifting hook
high load capacity coating free of chromium6
▪ Integrated threaded socket protection 8 anchor sizes provide 2

to prevent ingress of water a load capacity range
of 1.3 to 15 tonnes
▪ Load capacity up to 15 tonnes
Robust, durable lifting
hook
Lifting systems
DEHA HD socket 3
anchor system

4
Features Benefits
DETAN
▪ Small recesses on the Sockets coating free of 5
component surface chromium6
▪ Special round thread, Low-cost lifting device

insensitive to low levels of dirt
Simple installation thanks
Framing systems
to rotationally symmetrical
installation parts 6
DEHA socket
anchor system
Bolts, accessories
49
de h a s p h er i cal h ead l i ft i n g anc h o r
6000 - mill finish 6000 Spherical head lifting anchor, mill finish – continuation from left-hand column
Spherical head lifting anchor Item name PU Article no. Price

l Load group l [mm] [items] 0735.010- [EUR/item]
6000- 20.0- 180 1 00168 24.10
1 6000-
6000-
20.0- 200
20.0- 240
1
1
00070
00071
24.20
26.15
6000- 20.0- 340 1 00074 30.75
Item name PU Article no. Price 6000- 20.0- 500 1 00075 32.55
Load group l [mm] [items] 0735.010- [EUR/item] 6000- 20.0- 1000 1 00076 56.30
6000- 1.3- 35 300 00001 0.90
6000- 1.3- 40 300 00002 0.90 6000- 32.0- 200 1 00077 41.70
6000- 1.3- 50 300 00003 0.95 6000- 32.0- 250 1 00078 43.50
6000- 1.3- 55 300 00004 0.95 6000- 32.0- 280 1 00079 44.35
6000- 1.3- 65 300 00005 1.10 6000- 32.0- 320 1 00080 45.20
2 6000- 1.3- 85 200 00006 1.30 6000- 32.0- 700 1 00082 82.90
6000- 1.3- 120 200 00007 1.35 6000- 32.0- 1200 1 00083 122.20
6000- 1.3- 240 100 00008 1.40
6000- 45.0- 500 1 00197 122.55
6000- 2.5- 45 150 00015 1.40 6000- 45.0- 1200 1 00159 171.75
6000- 2.5- 55 150 00016 1.40 Other dimensions available upon request / stainless steel version available upon request
6000- 2.5- 65 100 00017 1.60
6000- 2.5- 85 100 00018 1.60 6000 - hot-dip galvanised
Lifting systems
6000- 2.5- 120 50 00019 1.70 Spherical head lifting anchor

3 6000-
6000-
2.5-
2.5-
170
280
50
40
00020
00022
2.00
2.65 Load group l [mm] [items] 0735.200- [EUR/item]
6000- 1.3- 35 FV 300 00066 1.05
6000- 4.0- 75 50 00023 2.30 6000- 1.3- 40 FV 300 00067 1.05
6000- 4.0- 100 50 00024 2.65 6000- 1.3- 50 FV 300 00068 1.10
6000- 4.0- 120 50 00025 2.70 6000- 1.3- 55 FV 300 00069 1.10
6000- 4.0- 170 40 00027 3.00 6000- 1.3- 65 FV 300 00070 1.40
6000- 4.0- 210 25 00028 3.65 6000- 1.3- 85 FV 200 00071 1.50
6000- 4.0- 240 25 00029 3.85 6000- 1.3- 120 FV 200 00072 1.55
6000- 4.0- 340 20 00030 4.75 6000- 1.3- 240 FV 100 00073 1.70
4 6000- 5.0- 75 50 00034 2.80 6000- 2.5- 45 FV 150 00080 1.70

6000- 5.0- 85 50 00035 3.00 6000- 2.5- 55 FV 150 00081 1.70
6000- 5.0- 95 50 00036 3.35 6000- 2.5- 65 FV 100 00082 1.90
6000- 5.0- 120 40 00038 3.45 6000- 2.5- 75 FV 100 00156 1.90
6000- 5.0- 180 25 00039 3.85 6000- 2.5- 85 FV 100 00083 1.90
6000- 5.0- 240 25 00040 4.35 6000- 2.5- 120 FV 50 00084 2.00
6000- 5.0- 340 1 00041 6.70 6000- 2.5- 170 FV 50 00085 2.45
6000- 5.0- 480 1 00042 8.45 6000- 2.5- 210 FV 40 00086 2.60
6000- 2.5- 280 FV 40 00087 3.20
DETAN
5 6000- 7.5- 100 25 00043 4.80

6000- 7.5- 120 25 00046 4.80 6000- 4.0- 75 FV 50 00088 2.75
6000- 7.5- 140 20 00047 5.45 6000- 4.0- 100 FV 50 00089 3.20
6000- 7.5- 165 20 00049 5.65 6000- 4.0- 120 FV 50 00090 3.25
6000- 7.5- 200 1 00050 6.50 6000- 4.0- 170 FV 40 00091 3.60
6000- 7.5- 300 1 00051 8.35 6000- 4.0- 210 FV 25 00092 4.35
6000- 7.5- 540 1 00052 12.95 6000- 4.0- 240 FV 25 00093 4.65
6000- 4.0- 340 FV 40 00094 5.70
Framing systems
6000- 10.0- 115 1 00054 8.80
6 6000-
6000-
10.0-
10.0-
135
150
1
1
00056
00057
8.85
9.15
6000-
6000-
5.0-
5.0-
65
75
FV
FV
50
50
00096
00097
3.35
3.35
6000- 10.0- 170 1 00058 9.75 6000- 5.0- 85 FV 50 00098 3.60
6000- 10.0- 340 1 00061 12.65 6000- 5.0- 95 FV 50 .010-00172 4.05
6000- 10.0- 680 1 00062 19.95 6000- 5.0- 120 FV 40 00100 4.20
6000- 5.0- 180 FV 25 00101 4.65
6000- 15.0- 140 1 00063 10.85 6000- 5.0- 210 FV 25 00102 4.65
6000- 15.0- 165 1 00064 10.45 6000- 5.0- 240 FV 25 .010-00174 5.25
Bolts, accessories
6000- 15.0- 200 1 00065 13.20 6000- 5.0- 340 FV 1 00104 8.05
6000- 15.0- 300 1 00066 16.35 6000- 5.0- 480 FV 1 00105 10.15
7 6000- 15.0- 400 1 00067 20.60 –Continued on next page –
6000- 15.0- 840 1 00068 31.40
–Continued right column – PU [items] = packaging unit [items]
50
6000 Hot-dip galvanised spherical head lifting anchor - cont. from page 50 6050 - mill finish

Item name PU Article no. Price Spherical head rod anchor
Load group l [mm] [items] 0735.200- [EUR/item] l
6000- 7.5- 85 FV 25 .010-00187 6.00
6000-
6000-
7.5- 100 FV
7.5- 120 FV
25
25
00106
00107
5.75
5.75
1
6000- 7.5- 140 FV 20 00108 6.50 Item name PU Article no. Price
6000- 7.5- 165 FV 20 00110 6.80 Load group l [mm] [items] 0735.070- [EUR/item]
6000- 7.5- 200 FV 1 00111 7.85 6050- 2,5- 400 1 00002 2.95
6000- 7.5- 300 FV 1 .010-00188 10.05 6050- 2,5- 520 1 00003 3.10
6000- 7.5- 540 FV 1 00113 15.50
6050- 4,0- 510 1 00004 5.50
6000- 10.0- 115 FV 1 00116 10.55 6050- 4,0- 720 1 00005 5.90
6000- 10.0- 120 FV 1 00157 10.60
6000- 10.0- 135 FV 1 00117 10.60 6050- 5,0- 580 1 00007 6.70 2
6000- 10.0- 150 FV 1 00118 10.90 6050- 5,0- 900 1 00008 7.50
6000- 10.0- 170 FV 1 00119 11.65
6000- 10.0- 220 FV 1 00149 15.05 6050- 7,5- 750 1 00009 12.65
6000- 10.0- 250 FV 1 00120 13.45 6050- 7,5- 1150 1 00010 14.10
6000- 10.0- 340 FV 1 00121 15.25
6000- 10.0- 500 FV 1 00122 17.40 6050- 10,0- 870 1 00011 16.25
6000- 10.0- 680 FV 1 00123 23.90 6050- 10,0- 1300 1 00012 18.25
Lifting systems
6000-
6000-
15.0-
15.0-
140
165
FV
FV
1
1
00124
00125
13.05
12.55
6050-
6050-
15,0- 1080
15,0- 1550
1
1
00013
00014
32.05
37.95
3
6000- 15.0- 200 FV 1 00126 15.85 Other dimensions available upon request
6000- 15.0- 300 FV 1 00127 19.60
6000- 15.0- 400 FV 1 00128 24.75 6050 - hot-dip galvanised
6000- 15.0- 840 FV 1 00129 37.75 Spherical head rod anchor

6000- 20.0- 165 FV 1 00130 28.85 Item name PU Article no. Price
6000- 20.0- 240 FV 1 00132 31.35 6050- 2.5- 400 FV 1 00158 3.55
6000-
6000-
20.0- 250
20.0- 340
FV
FV
1
1
00133
00134
33.90
36.85
6050- 5.0- 580 FV 1 00159 8.05
4
6000- 20.0- 500 FV 1 00135 39.05
6000- 20.0- 1000 FV 1 00136 67.50 6052 - mill finish
Spherical head rod anchor, offset for lifting
6000- 32.0- 200 FV 1 00137 50.05 precast concrete sandwich panels
6000- 32.0- 250 FV 1 00138 52.25
6000- 32.0- 280 FV 1 00139 53.25
6000- 32.0- 320 FV 1 00140 54.20
l
DETAN
6000- 32.0- 500 FV 1 00141 99.45
6000- 32.0- 700 FV 1 00142 114.95 Item name PU Article no. Price 5
PU [items] = packaging unit [items] 6052- 2.5- 508 1 00002 5.10
6052- 5.0- 885 1 00004 9.45
6052- 7.5- 1134 1 00006 16.05
6052- 10.0- 1284 1 00008 20.80
6052- 15.0- 1535 1 00010 41.05
Framing systems
Galvanised anchors available upon request
6
Bolts, accessories
51
6006 - mill finish 6000 D - mill finish

Erection anchor Double-headed lifting anchor

l l
1
For corresponding recess former 6134 → see page 53
Item name PU Article no. Price Load group l [mm] [items] 0735.018- [EUR/item]
Load group l [mm] [items] 0735.120- [EUR/item] 6000- 10.0- 340D 1 00056 12.65
6006- 2.5- 240 1 00001 6000- 15.0- 400D 1 00057 20.60
upon request
6006- 5.0- 240 1 00002 6000- 20.0- 500D 1 00067 36.75

6000- 32.0- 700D 1 00058 82.90
6006 - hot-dip galvanised
2 Item name PU Article no. Price 6000 D - hot-dip galvanised
Load group l [mm] [items] 0735.120- [EUR/item] Item name PU Article no. Price
Load group l [mm] [items] 0735.208- [EUR/item]
6006- 2.5- 240 FV 1 00151
upon request 6000- 10.0- 340D FV 1 00056 10.80
6006- 5.0- 240 FV 1 00152
6000- 15.0- 400D FV 1 00057 24.75
6000- 32.0- 700D FV 1 00058 44.05
6060 6000- 20.0- 500D FV 1 00067 99.45
Base plate b
Lifting systems
a
6002 - mill finish
3 Spherical head lifting anchor,
offset for lifting
precast sand-
wich panels
Item name Load a/b PU Article no. Price

group [mm] [items] 0737.050- [EUR/item]
6060- 1.3 1.3 120/65 1 00001 upon request l
6001 - mill finish Item name PU Article no. Price
4 Anchor with eye

(installation in walls)
l
6002-
Load group l [mm]
1.3- 227
[items]
1
0735.030-
00001
[EUR/item]
3.35
6002- 2.5- 268 1 00002 4.65
6002- 4.0- 406 1 00003 8.45
6002- 5.0- 466 1 00004 10.30
6002- 7.5- 664 1 00005 15.65
Item name PU Article no. Price 6002- 10.0- 667 1 00006 22.35
Load group l [mm] [items] 0735.050- [EUR/item] 6002- 15.0- 825 1 00007 34.35
6001- 1.3- 65 300 00001 1.60 6002- 20.0- 986 1 00008 59.55
6001- 2.5- 90 100 00002 2.50
DETAN
5 6001-
6001-
5.0-
10.0-
120
180
1
1
00003
00004
5.05
13.00
6002 - hot-dip galvanised
6001- 20.0- 250 1 00005 28.35
Load group l [mm] [items] 0735.200- [EUR/item]
6002- 1.3- 227 FV 1 00053 4.05
6002- 2.5- 268 FV 1 00054 5.55
6001 - hot-dip galvanised 6002- 4.0- 406 FV 1 00055 10.15
Item name PU Article no. Price 6002- 5.0- 466 FV 1 00056 12.30
Framing systems
Load group l [mm] [items] 0735.200- [EUR/item] 6002- 7.5- 664 FV 18.75
1 00057
6001- 1.3- 65 FV 300 00061 1.90
6 6001- 2.5- 90 FV 100 00062 3.00
6002- 10.0-
6002- 15.0-
667 FV
825 FV
1
1
00058
00059
26.80
41.15
6001- 5.0- 120 FV 1 00063 6.05 6002- 20.0- 986 FV 1 00060 71.40
6001- 10.0- 180 FV 1 00064 15.55 Other dimensions and stainless steel anchors available upon request
6001- 20.0- 250 FV 1 00065 33.95 PU [items] = packaging unit [items]
Bolts, accessories
52
de h a s p h er i cal h ead l i ft i n g anc h o r + acce s s o r i e s
6010 - mill finish 6003, 6004

Spherical head panel anchor DKR conical pipe anchor
l
l 1
6003 anchor shaft 6004 anchor head
Accessories: Recess former 6173 → page below

Sealing cap 6171 → page 56
Item name Anchor PU Article no. Price
Load group l plate Item name PU Article no. Price
[mm] [mm] [items] 0735.060- [EUR/item] Load group l [mm]* [items] 0735.140- [EUR/item]
6010- 2.5- 55 70x70x6 50 00001 4.75 6003- 10.0- 60 1 00011
6010- 2.5- 120 70x70x6 25 00002 5.10 6003- 10.0- 75 1 00001 2
6010- 5.0- 65 90x90x8 25 00004 6.70 6003- 10.0- 100 1 00002
6010- 5.0- 110 90x90x8 1 00007 7.15 6003- 10.0- 125 1 00003
6010- 10.0 - 115 90x90x10 1 00009 11.50 6003- 20.0- 100 1 00012
6003- 20.0- 130 1 00004
6010 - hot-dip galvanised 6003- 20.0- 155 1 00005
upon
Item name Anchor PU Article no. Price 6003- 20.0- 180 1 00006
request
Load group l plate 6003- 32.0- 120 1 00013
Lifting systems
[mm] [mm] [items] 0735.200- [EUR/item] 6003- 32.0- 140 1 00015
6010- 2.5-
6010- 2.5-
55 FV
120 FV
70x70x6
70x70x6
50
25
00043
00044
5.70
6.10
6003- 32.0-
6003- 32.0-
155
175
1
1
00007
00008 3
6010- 5.0- 65 FV 90x90x8 25 00046 8.05 6003- 32.0- 200 1 00009
6010- 5.0- 110 FV 90x90x8 1 00047 8.55 6003- 32.0- 225 1 00010
6010- 10.0- 115 FV 90x90x10 1 00048 13.80 6003- 32.0- 235 1 00014
* measurement l: see technical information
6073 - mill finish 0735.150-

6004- 10.0 1 00001 upon
l 6004- 20.0 1 00002 request
DSM quick 6004- 32.0 1 00003
assembly
anchor 6134
4
Rubber recess former
for erection
anchor 6006 (→ page 52)
Load group l
Item name Color PU Article no. Price
6073- 1.3- 65 200 00005 Load group [items] 0736.150- [EUR/item]
upon request
6073- 1.3- 120 100 00004 6134- 2.5 yellow 10 00001
DETAN
upon request
6073- 2.5- 85 100 00001 0.95
6134- 5.0 blue 10 00002
5
6073- 2.5- 120 50 00002 1.10
6073- 2.5- 170 50 00003 2.80 6173
Rubber recess former
6073- 5.0- 110 40 00006 2.60 for DKR conical pipe anchor
6073- 5.0- 240 40 00007 4.15 (→ see above)
6073 - hot-dip galvanised Color PU Article no. Price

Framing systems
Item name
Load group [items] 0736.180- [EUR/item]
Load group

l
6173-
6173-
10.0
20.0
yellow
black
1
1
00001
00002
28.60
44.00
6
6073- 1.3- 65 FV 200 00001 6173- 32.0 black 1 00003 84.45
upon request
6073- 1.3- 120 FV 100 00002 PU [items] = packaging unit [items]
6073- 2.5- 85 FV 100 00003 1.10

6073- 2.5- 120 FV 50 00004 1.40
6073- 2.5- 170 FV 50 00005 3.35
Bolts, accessories
6073- 5.0- 110 FV 40 00006 3.15

6073- 5.0- 240 FV 40 00007 5.00 7
53
de h a s p h er i cal h ead l i ft i n g anc h o r - acce s s o r i e s
6132 6133 6138 6145

6132 Round rubber recess 6133 Round rubber recess Narrow rubber recess former, Narrow rubber recess former,
former (incl. threaded former (incl. threaded plate complete incl. threaded plate with sleeve
plate 6141, with sleeve 6153,
1 see column
below on
see column
below on
the right) the right)
Item name Color PU Article no. Price Item name Color PU Article no. Price
Load group [items] 0736.020- [EUR/item] Load group [items] 0736.070- [EUR/item]
6132- 1.3 blue 10 00001 9.80 6138- 1.3 10 00001 8.00

6132- 2.5 yellow 10 00002 13.65 6138- 2.5 10 00002 11.75
6132- 4.0 black 10 00003 18.70 6138- 4.0 10 00003 15.90
2 6132- 5.0 blue 10 00004 18.70 6138- 5.0
black
10 00004 15.90
6132- 7.5 red 10 00005 25.10 6138- 7.5 10 00005 21.30
6132- 10.0 yellow 10 00006 25.10 6138- 10.0 10 00006 21.30
6132- 15.0 grey 10 00007 50.85 6138- 15.0 10 00007 41.70
6132- 20.0 black 10 00008 50.85 6138- 20.0 10 00008 41.70
6132- 32.0 + 45.0 black 1 00009 100.50 Thread
0736.080-
0736.030- M
6133- 1.3 blue 10 00001 16.50 6145- 1.3 8 10 00001 14.65
Lifting systems
6133- 2.5 yellow 10 00002 19.35 6145- 2.5 12 10 00002 17.65

6145- 4.0 12 10 00003 22.05
3 6133-
6133-
4.0
5.0
black
blue
10
10
00003
00005
24.80
24.80 6145- 5.0 12 10 00004 22.05
6133- 7.5 red 10 00006 31.65 6145- 7.5 12 10 00005 27.80
6133- 10.0 yellow 10 00007 31.65 6145- 10.0 12 10 00007 27.80
6133- 15.0 grey 10 00008 57.55 6145- 15.0 12 10 00008 48.35
6133- 20.0 black 10 00004 57.55 6145- 20.0 12 10 00009 60.10
6133- 32.0 + 45.0 black 1 00009 93.30
6141 6153
6131 Threaded plate, com- Threaded plate,
Round rubber recess former, plete with threaded rod sleeve with inner thread
4 no steel parts
Can also be used as breech body
l
Item name Color PU Article no. Price Item name Thread PU Article no. Price
Load group [items] 0736.010- [EUR/item] Load group M [items] 0737.020- [EUR/item]
6131- 1.3 blue 10 00001 7.10 6141- 1.3 8 10 00001 2.65
6131- 2.5 yellow 10 00002 9.85 6141- 2.5 12 10 00002 3.80
6141- 4.0/5.0 12 10 00003 4.10
DETAN
6131- 4.0 black 10 00003 14.65

5 6131- 5.0 blue 10 00004 14.65 6141- 7.5/10.0 12 10 00004 4.15
6131- 7.5 red 10 00005 21.05 6141- 15.0/20.0 12 10 00005 5.05
6131- 10.0 yellow 10 00006 21.05 6141- 32.0 16 10 00006 30.90
6131- 15.0 grey 10 00007 45.65 0737.040-
6131- 20.0 black 10 00008 45.65 6153- 1.3 8 10 00001 7.75
6131- 32.0 + 45.0 black 1 00009 69.80 6153- 2.5 12 10 00002 7.90
6153- 4.0/5.0 12 10 00003 8.45
6137 6153- 7.5/10.0 12 10 00004 9.00
Framing systems
6153- 15.0/20.0 16 10 00005 10.10

Narrow rubber recess former
6153- 32.0 16 1 030-00006 21.85
6 no steel parts
6160
Item name Color PU Article no. Price Retaining screw
6137- 1.3 10 00001 5.35
6137- 2.5 10 00002 8.05
Bolts, accessories
6137- 4.0 10 00003 11.95

6137- 5.0 10 00004 11.95
black
7 6137-
6137-
7.5
10.0
10
10
00005
00006
17.20
17.20
See TPA-S1, page 62
6137- 15.0 10 00007 36.60
6137- 20.0 10 00008 36.60
54
de h a s p h er i cal h ead l i ft i n g anc h o r - acce s s o r i e s
6150 6152

Steel recess former Steel recess former,
trumpet shape
Item name Thread PU Article no. Price Item name Thread PU Article no. Price
Load group M [items] 0736.100- [EUR/item] Load group M [items] 0736.120- [EUR/item]
6150- 1.3 8 1 00001 22.95 6152- 1.3 8 1 00001 27.10
6150- 2.5 12 1 00002 29.45 6152- 2.5 12 1 00002 34.10
6150- 5.0 12 1 00003 43.65 6152- 4.0/5.0 12 1 00003 54.20
6150- 10.0 12 1 00004 upon request
6152 M 2
6150 M Steel recess former with magnet,
Steel recess former with magnet trumpet shape
Lifting systems
Item name Thread Adhesive force PU Article no. Price
Thread Adhesive force PU Article no. Price Load group M [kg] [items] 0736.130- [EUR/item]
Item name
Load group M [kN] [items] 0736.110- [EUR/item] 6152- 1.3M 8 140 1 00001 63.45 3
6150- 1.3M 8 1.4 1 00001 58.45 6152- 2.5M 12 170 1 00002 73.15
6150- 2.5M 12 1.7 1 00002 68.50 6152- 4.0M 12 250 1 00003 82.95
6150- 5.0M 12 2.5 1 00003 78.15 6152- 5.0M 12 250 1 00004 82.95
6152- 7.5M 12 300 1 00005 112.35
6151

Rubber sleeve 6015
for recess former Breech body, polystyrene,
Type 6150 + 6150M for spherical head lifting
H
anchor
4
Item name H PU Article no. Price
Load group [mm] [items] 0737.060- [EUR/item]
6151- 1.0/1.3 11 100 00001 0.95
6151- 2.5 12 100 00002 1.40 Item name Outer Ø PU Article no. Price
6151- 5.0 14 100 00003 2.20 Load group [mm] [items] 0737.010- [EUR/item]
6151- 7.5 22 1 00004 14.00 6015- 1.3 60 100 00001 0.55
6151- 10.0 22 1 00005 24.45 6015- 2.5 74 100 00002 0.60
6015- 4.0/5.0 94 100 00003 0.60
DETAN
6151 D 6015- 7.5/10.0 118 50 00004 1.00 5
Rubber sleeve 6015- 15.0/20.0 160 50 00005 1.80
for recess former
Types 6152, 6152M 6172
VKF breech body made from asbestos cement,
H for spherical head lifting anchor
and DKR conical pipe anchor
Item name H PU Article no. Price
Framing systems

6151- 1.3D 22 100 00001 2.20
6151- 2.5D 24 100 00002 3.10 6
6151- 4.0D 28 100 00003 5.65 Item name Outer Ø PU Article no. Price
6172- 7.5 / 10.0 114 1 00001
upon
6172- 15.0 / 20.0 156 1 00002
request
6172- 32.0 / 45.0 210 1 00003
Bolts, accessories
55
de h a s p h er i cal h ead l i ft i n g anc h o r acce s s o r i e s + l i ft i n g dev i ce
6126 6109
Magnetic recess former for Pipe lifting device,

DSM quick assembly anchor 6073 Zinc plated, chromium6 free
(see page 53)
Item name Thread Adhesive force PU Article no. Price

Load group M [kg] [items] 0736.190- [EUR/item] Item name PU Article no. Price
6126- 1.3 8 140 1 00001 Load group [items] 0738.020- [EUR/item]
upon 6109- 1.3 1 00001 66.90

6126- 2.5 12 140 1 00002
request
6126- 5.0 12 140 1 00003 6109- 2.5 1 00002 75.10
6109- 4.0/5.0 1 00003 112.00
2 6127 6128 6109- 7.5/10.0 1 00004 186.10
Magnetic recess formers for
DSM quick assembly anchor 6073 6116
(see page 53) Rotary and lifting clutch Cable ordered separately.
without cable Article no.:
6127 made from polyurethane 6128 made from rubber 0568.129-00001
Note: + load group + length
Cable + positioning of cable
upon request eye stiffener;
Lifting systems
3 Cable assembly
Article no.:
Item name Material PU Article no. Price 0738.049-00001;
Load group M [items] 0736. [EUR/item] Prices upon request
6127- 1.3 Polyurethane 1 170-00001 Item name PU Article no. Price
6127- 2.5 Polyurethane 1 170-00002 Load group [items] 0738.040- [EUR/item]
upon 6116- 1.0/1.3 1 00001 1,886.15
6127- 5.0 Polyurethane 1 170-00003
request
6128- 1.3 Rubber 1 140-00002 6116- 1.5/2.5 1 00002 3,640.15
6128- 2.5 Rubber 1 140-00001 6116- 3.0/5.0 1 00003 8,311.20
6116- 6.0/10.0 1 00004 9,124.70
4 6171 6116-
6116-
12.0/20.0
32.0
1
1
00005
00006
10,284.90
11,236.20
DKR plastic sealing cap
for DKR conical pipe anchor
(see page 53) 6112
Pipe installation device
Item name Outer Ø PU Article no. Price

6171- 10.0 43 1 00001
upon
DETAN
6171- 20.0 65 1 00002

5 6171- 32.0 83 1 00003
request
6102
Universal head clutch
Zinc plated, chromium6 free,
Item name for pipe PU Article no. Price
Load group lengths [items] 0738.030- [EUR/item]
6112- 1.5/2.5 up to 3.5 m 1 00001 1,162.20
Framing systems
6112- 3.0/5.0 up to 3.5 m 1 00002 2,386.35
6 6112-
6112-
6.0/10.0
12.0/20.0
up to 3.5 m
of 2.5 m
1
1
00003
00004
3,974.30
4,316.30
6112- 12.0/20.0 of 3.0 m 1 00005 4,492.65
6112- 12.0/20.0 of 3.5 m 1 00006 4,732.75

Bolts, accessories
6102- 1.0/1.3 1 00001 103.60

6102- 1.5/2.5 1 00002 125.45
7 6102- 3.0/5.0 1 00003 181.90
6102- 6.0/10.0 1 00004 312.85
6102- 12.0/20.0 1 00005 538.45
6102- 32.0 1 00006 1,175.05
6102- 45.0 1 00007 1,222.25
56
deha lifting loops
6325

Lifting loop
l
1
Item name Cable Ø Length l PU Article no. Price
Load group [mm] [mm] [items] 0742.110- [EUR/item]
6325- 0,8 6 200 1 00001 1.40
6325- 1,2 7 220 1 00002 1.80
6325- 1,6 8 240 1 00003 2.00 2
6325- 2,0 9 270 1 00004 2.50
6325- 2,5 10 300 1 00005 2.70
6325- 4,0 12 350 1 00006 3.80
6325- 6,3 16 400 1 00007 7.20
6325- 8,0 18 450 1 00008 10.45
6325- 10,0 20 500 1 00009 15.70
6325- 12,5 22 530 1 00010 19.50
Lifting systems
6325- 16,0 26 600 1 00011 26.05
6325-
6325-
20,0
25,0
28
32
700
800
1
1
00012
00013
42.10
52.30 3

4
DETAN
5
Framing systems
6
Bolts, accessories
57
fr i meda t pa l i ft i n g anc h o r
TPA -FS mill finish TPA - FS - hot-dip galvanised

- Continuation of left page -

Spread anchor Spread anchor
PU Price
Load capacity l
[items] 0070.110- [EUR/item]
1 [t] [cm]
TPA - FS- 5.0- 24 FV 1 00048 5.70
l
TPA - FS- 5.0- 40 FV 1 00049 8.70
TPA - FS- 7.5- 26 FV 1 00053 10.20

TPA - FS- 7.5- 30 FV 1 00054 11.15
TPA - FS- 7.5- 42 FV 1 00055 15.05
PU Price TPA - FS- 10.0- 30 FV 1 00056 13.60

Load capacity l
[t] [cm] TPA - FS- 10.0- 37 FV 1 00057 16.60
TPA - FS - 0.7 - 11 150 00001 1.00 TPA - FS- 10.0- 52 FV 1 00058 22.40
2 TPA - FS - 1.4 - 11 150 00002 1.30
TPA - FS - 1.4 - 16 100 00003 1.40 TPA - FS- 14.0- 37 FV 1 00059 26.95
TPA - FS - 2.0 - 13 100 00004 1.45 TPA - FS- 14.0- 46 FV 1 00060 33.05
TPA - FS - 2.0 - 16 50 00005 1.70 TPA - FS- 22.0- 50 FV 1 00061 43.50
TPA - FS - 2.0 - 21 50 00006 1.80 TPA - FS- 22.0- 62 FV 1 00062 53.75
TPA - FS - 2.5 - 15 50 00007 1.75
TPA - FS - 2.5 - 20 50 00008 2.20 TPA -FZ mill finish
TPA - FS - 2.5 - 25 25 00009 2.65 Two-hole anchor
Lifting systems
3 TPA - FS -
TPA - FS -
3.0 - 16
3.0 - 20
1
1
00010
00011
2.50
3.00 l
TPA - FS - 3.0 - 28 1 00012 3.75
TPA - FS - 4.0 - 18 1 00013 3.15
TPA - FS - 4.0 - 24 1 00014 4.00
TPA - FS - 4.0 - 32 1 00015 5.05
TPA - FS - 5.0 - 18 1 00016 4.00

TPA - FS - 5.0 - 24 1 00017 4.75 PU Price
Load capacity l
TPA - FS - 5.0 - 40 1 00018 7.20 [items] 0070.020- [EUR/item]
[t] [cm]
TPA - FZ - 1.4- 09 200 00002 0.95
4 TPA - FS - 7.5 - 26
TPA - FS - 7.5 - 30
1 00022 8.50
9.25
TPA - FZ - 2.0- 09 150 00003 1.35
1 00023
TPA - FZ - 2.5- 09 100 00004 1.45
TPA - FS - 7.5 - 42 1 00024 12.55
TPA - FS - 10.0 - 30 1 00025 11.30
TPA - FZ - 3.0- 12 1 00005 2.20
TPA - FS - 10.0 - 37 1 00026 13.85
TPA - FZ - 4.0- 12 1 00006 2.95
TPA - FS - 10.0 - 52 1 00027 18.70
TPA - FZ - 5.0- 12 1 00007 3.30
TPA - FS - 14.0 - 37 1 00028 22.40

TPA - FZ - 7.5- 16 1 00009 6.05
TPA - FS - 14.0 - 46 1 00029 27.55
TPA - FZ - 10.0- 17 1 00010 7.55
DETAN
TPA - FS - 22.0 - 50 1 00030 36.25

5 TPA - FS - 22.0 - 62 1 00031 44.80
TPA - FZ - 14.0- 24 1 00011 16.60
TPA - FZ - 22.0- 30 1 00013 23.60
TPA - FS hot-dip galvanised TPA - FZ - 26.0- 30 1 00012 35.25
PU Price
Load capacity l
[t] [cm]
[items] 0070.110- [EUR/item] TPA -FZ hot-dip galvanised
TPA - FS- 0.7- 11 FV 150 00032 1.20 Item name Article no.
PU Price
Load capacity l
TPA - FS- 1.4- 11 FV 150 00033 1.50 [items] [EUR/item]
Framing systems
[t] [cm] 0070.110-

TPA - FS- 1.4- 16 FV 100 00034 1.70
TPA - FZ- 1.4- 9 FV 200 00064 1.10
6 TPA - FS- 2.0- 13 FV
TPA - FS- 2.0- 16 FV
100
50
00035
00036
1.75
2.00
TPA - FZ- 2.0- 9 FV
TPA - FZ- 2.5- 9 FV
150
100
00065
00066
1.55
1.75
TPA - FS- 2.0- 21 FV 50 00037 2.20
TPA - FS- 2.5- 15 FV 50 00038 2.15
TPA - FZ- 3.0- 12 FV 1 00067 2.60
TPA - FS- 2.5- 20 FV 50 00039 2.60
TPA - FZ- 4.0- 12 FV 1 00068 3.55
TPA - FS- 2.5- 25 FV 25 00040 3.20
TPA - FZ- 5.0- 12 FV 1 00069 4.00
TPA - FS- 3.0- 16 FV 1 00041 3.00

TPA - FZ- 7.5- 16 FV 1 00071 7.30
Bolts, accessories
TPA - FS- 3.0- 20 FV 1 00042 3.60

TPA - FZ- 10.0- 17 FV 1 00072 9.05
TPA - FS- 3.0- 28 FV 1 00043 4.45
7 TPA
TPA
-
-
FS-
FS-
4.0-
4.0-
18 FV
24 FV
1
1
00044
00045
3.75
4.75
TPA - FZ- 14.0- 24 FV 1 00073 19.90
TPA - FZ- 22.0- 30 FV 1 00074 28.30
TPA - FS- 4.0- 32 FV 1 00046 6.05
TPA - FZ- 26.0- 30 FV 1 00075 42.30
TPA - FS- 5.0- 18 FV 1 00047 4.75
–Continued see right column –
58
TPA -FX mill finish TPA-FD - Continuation of left column -

Lifting anchor Item name
PU Article no. Price
for sandwich panels Load capacity l
[items] [EUR/item]
[t] [cm] 0070.009-
TPA - FD - 2.5 - L-SK FV 1 00001 ➀
1
TPA - FD - 5.0 - L-SK FV 1 00001 ➀
l TPA - FD - 7.5 - L-SK FV 1 00001 ➀
TPA - FD - 10.0 - L-SK FV 1 00001 ➀ upon request
TPA - FD - 12.5 - L-SK FV 1 00001 ➀
TPA - FD - 17.0 - L-SK FV 1 00001 ➀
TPA - FD - 22.0 - L-SK FV 1 00001 ➀
➀ Please specify anchor length (measurement l) (note installation depth)!
Item name
PU
Article no.
Price
TPA -FF mill finish 2
Load capacity l Flat foot anchor
[t] [cm]
Version for Version for
TPA - FX - 2.5- 25 1 00001 5.55 load groups load groups
2.5 - 5.0 t 10.0 - 26.0 t
TPA - FX - 5.0- 30 1 00002 9.20
(load stages l (load stages l
0.7 - 5.0 t 5.3 - 22.0 t
Lifting systems
TPA - FX - 7.5- 35 1 00003 16.20
see table) see table)
TPA - FX - 10.0- 35 1 00004 21.05
Item name
Load capacity l
PU Article no. Price 3
TPA - FX - 17.0- 40 1 00005 61.20 [items] [EUR/item]
[t] [cm] 0070.070-
TPA - FF - 0.7 - 6 100 00001 2.15
T PA - F X hot - dip ga lva nised
TPA - FX - 2.5- 25 - FV 1 00006 6.60 TPA - FF - 1.4 - 6 100 00002 2.30
TPA - FF - 2.0 - 7 100 00003 2.65

TPA - FX - 5.0- 30 - FV 1 00007 11.10 TPA - FF - 2.5 - 7 100 00004 3.00
TPA - FX - 7.5- 35 - FV 1 00008 19.45 TPA - FF - 3.0 - 9 1 00005 3.85

TPA - FX - 10.0- 35 - FV 1 00009 25.25 TPA - FF - 4.0 - 11 1 00006 4.30
TPA - FF - 5.0 - 12 1 00007 5.50 4
TPA - FX - 17.0- 40 - FV 1 00010 73.45
TPA - FF - 7.5 - 17 1 00009 8.75
TPA -FD mill finish TPA - FF - 10.0 - 20 1 00010 11.00
Double-head stud
TPA - FF - 12.5 - 22 1 00011 16.05
TPA - FF - 17.0 - 27 1 00012 23.20
TPA - FF - 22.0 - 31 1 00013 35.95
DETAN
TPA -FF hot-dip galvanised
l Item name Article no.
5
PU Price
Load capacity l
[t] [cm]
TPA FF- 0.7- 6 FV 100 00019 2.50
TPA FF- 1.4- 6 FV 100 00020 2.75
TPA FF- 2.0- 7 FV 100 00021 3.20
TPA FF- 2.5- 7 FV 100 00022 3.60
Framing systems
Article no.
Item name
PU Price TPA FF- 3.0- 9 FV 1 00023 4.65
Load capacity l
[t] [cm]
[items]
0070.009-
[EUR/item] TPA FF- 4.0- 11 FV
TPA FF- 5.0- 12 FV
1
1
00024
00025
5.15
6.55
6
TPA - FD - 2.5 - L-SK 1 00001 ➀
TPA - FD - 5.0 - L-SK 1 00001 ➀ TPA FF- 7.5- 17 FV 1 00027 10.45
TPA - FD - 10.0 - L-SK 1 00001 ➀ upon request
Bolts, accessories

➀ Please specify anchor length (measurement l) (note installation depth)! PU [items] = packaging unit [items]
7
59
TPA -FP mill finish TPA -FA/-FE mill finish

Panel anchor TPA-FA TPA-FE

Double shoulder Single shoulder
l erection anchor erection anchor
1 Item name Base l

PU Article no. Price l
Load capacity l plate
[items] [EUR/item]
[t] [cm] [mm] 0070.050-
TPA - FP - 1.4 - 5 80/80 1 00001 5.50
TPA - FP - 2.5 - 8 80/80 1 00002 5.90 Item name
Load capacity l
[items] [EUR/item]
TPA - FP - 5.0 - 12 100/100 1 00003 9.35 [t] [cm] 0070.030-

TPA - FA - 1.4 - 20 50 00001 3.45
TPA - FP - 10.0 - 16 140/140 1 00004 17.30 TPA - FA - 2.5 - 23 25 00002 5.00
2
TPA-FP hot-dip galvanised TPA - FA - 4.0 - 27 1 00003 7.50
Item name Article no. TPA - FA - 5.0 - 29 1 00004 9.45
PU Price
Load capacity l
[t] [cm] TPA - FA - 7.5 - 32 1 00005 15.10
TPA - FP - 1.4- 5 FV 1 00076 6.55 TPA - FA - 10.0 - 39 1 00006 21.40
TPA - FP - 2.5- 8 FV 1 00077 7.10
TPA - FA - 12.5 - 50 1 00007 54.10
Lifting systems
TPA - FP - 5.0- 12 FV 1 00078 11.25 TPA - FA - 17.0 - 50 1 00008 65.35
3 TPA - FP - 10.0- 16 FV 1 00079 20.80

TPA - FA - 22.0 - 50 1 00009
0070.040-
69.80
TPA - FE - 1.4 - 20 50 00001 3.45

TPA -FG TPA - FE - 2.5 - 23 25 00002 5.05
Garage anchor
TPA - FE - 4.0 - 27 1 00003 7.55
TPA - FE - 5.0 - 29 1 00004 9.55
Item name TPA - FE - 7.5 - 32 1 00005 15.30

Load capacity l TPA - FE - 10.0 - 39 1 00006 21.50
[items] [EUR/item]
4 [t] [cm]
TPA - FG - 4.0 - 7 1
0070.060-
00001 12.30 TPA - FE - 12.5 - 50 1 00007 53.60
TPA - FE - 17.0 - 50 1 00008 64.75
TPA -FU TPA - FE - 22.0 - 50 1 00009 69.00
Universal anchor
TPA-FA/-FE hot-dip galvanised
PU
Load capacity l [EUR/
l [items]
[t] [cm] 0070.110- item]
DETAN
TPA FA- 1.4- 20 FV 50 00001 4.20

5 TPA FA- 2.5- 23 FV 25 00002 6.00
TPA FA- 4.0- 27 FV 1 00003 9.00

Item name TPA FA- 5.0- 29 FV 1 00004 11.30
Load capacity l
[items] [EUR/item]
[t] [cm] 0070.100- TPA FA- 7.5- 32 FV 1 00005 18.15
Normal version without corrosion protection TPA FA- 10.0- 39 FV 1 00006 25.65
Framing systems
TPA - FU - 1.25 - 12 100 00001 1.35

FV = hot-dip galvanised TPA FA- 12.5- 50 FV 1 00007 64.90
6 TPA - FU - 1.25 - 12 - FV
SS 304 = stainless steel W 1.4301 (SS 304)
100 00003 1.55 TPA FA- 17.5-
TPA FA- 22.0-
50 FV
50 FV
1
1
00008
00009
78.40
83.70
TPA - FU - 1.25 - 12 - A2 100 00002 5.25 TPA-FD double head stud
PU [items] = packaging unit [items] TPA FE- 1.4- 20 FV 50 00010 4.20
TPA FE- 2.5- 23 FV 25 00011 6.05
TPA FE- 4.0- 27 FV 1 00012 9.05

TPA FE- 5.0- 29 FV 1 00013 11.50
Bolts, accessories
TPA FE- 7.5- 32 FV 1 00014 18.30

7 TPA FE- 10.0- 39 FV 1 00015 25.85
TPA FE- 12.5- 50 FV 1 00016 64.35

TPA FE- 17.5- 50 FV 1 00017 77.65
TPA FE- 22.0- 50 FV 1 00018 82.85
60
fr i meda l i ft i n g anc h o r – acce s s o r i e s
TPA - A1 TPA - A8

Recess former Recess former
with threaded / bayonet connection, (twin shell),
plastic, for all anchors except plastic
TPA-FU/-FG
1
TPA - A1 - 2.5 t 1 00001 11.15 TPA - A8 - 2.5 t 1 00001 0.45
TPA - A1 - 5.0 t 1 00002 13.55
TPA - A1 - 10.0 t 1 00003 32.05 TPA - A -E1
TPA - A1 - 26.0 t 1 00004 90.00 Spare wedge for
recess former -A4/5
TPA - A2
Rubber recess former Item name PU Article no. Price
cannot be used with erection anchors, Load group [items] 0072.120- [EUR/item] 2
for anchor TPA-FS/-FZ/-FD/-FP/-FF TPA - A - E1 - 2.5 t 1 00002 2.00
Item name PU Article no. Price TPA - A - E1 - 5.0 t 1 00003 3.15
Load group [items] 0072.020- [EUR/item] TPA - A - E1 - 10.0 t 1 00004 17.30
TPA - A2 - 2.5 t 1 00001 7.10 TPA - A - E1 - 26.0 t 1 00005 27.15
TPA - A2 - 5.0 t 1 00002 9.45
TPA - A2 - 10.0 t 1 00003 27.90 TPA - A -Z1
Foam strips
Lifting systems
TPA - A3 for recess former
Rubber recess former,
including fastener,
3
for garage anchor TPA-FG Item name PU Article no. Price
Load group [items] 0072.120- [EUR/100 items]
TPA - A - Z1 - 2.5 t 1 00006 5.05
Item name PU Article no. Price TPA - A - Z1 - 5.0 t 1 00007 5.05
Load group [items] 0072.030- [EUR/item] TPA - A - Z1 - 10.0 t 1 00008 37.00

TPA - A3 - 5.0 t 1 00001 17.25 TPA - A - Z1 - 26.0 t 1 00009 72.30
TPA - A4/- A5 TPA -H1

Recess former
including wedge
Holding plate for 4
recess formers A1 and A9
TPA-A4 = plastic
TPA-A5 = steel
for all anchors except TPA-FU/-FG Item name PU Article no. Price
Item name PU Article no. Price Load group [items] 0073.010- [EUR/item]
Load group [items] 0072. [EUR/item] TPA - H1 - 1.25 t 1 00001 3.75
TPA - A4 - 2.5 t 1 040-00001 8.85 TPA - H1 - 2.5 t 1 00002 3.80
TPA - A4 - 5.0 t 1 040-00002 12.60 TPA - H1 - 5.0 t 1 00003 4.10
DETAN
TPA - A4 - 10.0 t 1 040-00003 35.05 TPA - H1 - 10.0 t 1 00004 7.35
TPA - A4 - 26.0 t 1 040-00004 69.60 TPA - H1 - 26.0 t 1 00005 10.65 5
TPA - A5 - 2.5 t 1 050-00001 59.05
TPA - A5 - 5.0 t 1 050-00002 78.95 TPA -H2
TPA - A5 - 10.0 t 1 050-00003 103.55 Holding plate for floating
TPA - A5 - 26.0 t 1 050-00004 257.40 installation of recess
formers A1 and A9
TPA - A7
Framing systems
Recess former PU
with threaded connection Load group [items] 0073.020- [EUR/item]
plastic, for TPA-FU
TPA - H2 - 2.5 t
TPA - H2 - 5.0 t
1
1
00001
00002
8.45
8.50
6
Load group [items] 0072.070- [EUR/item] TPA - H2 - 10.0 t 1 00003 13.25
TPA - A7 - 1.25 t 1 00001 4.80 TPA - H2 - 26.0 t 1 00004 16.40
TPA - A9 TPA -H3

Recess former Holding plate for
as TPA-A1, but without side recess, recess former A2
Bolts, accessories
(cannot be used for erection anchors)

Load group [items] 0072.090- [EUR/item] Item name PU Article no. Price 7
TPA - A9 - 2.5 t 1 00001 11.15 Load group [items] 0073.030- [EUR/item]
TPA - A9 - 5.0 t 1 00002 16.40 TPA - H3 - 2.5 t 1 00001 8.80
TPA - A9 - 10.0 t 1 00003 32.05 TPA - H3 - 5.0 t 1 00002 8.90
TPA - A9 - 26.0 t 1 00004 90.00 TPA - H3 - 10.0 t 1 00003 9.85
61
F R I M E DA l i ft i n g anc h o r – acce s s o r i e s , r i n g clutc h
TPA -HM TPA -R1

Magnetic holding plate Ring clutch with steel bracket / zinc plated (chromium6 free)
for recess former
A1 and A9

TPA - HM - 2.5 t 1 00001 143.05
TPA - HM - 5.0 t 1 00002 143.05
TPA - HM - 10.0 t 1 00003 upon request
TPA -S1 Item name PU Article no. Price

Retaining bolt Load group [items] 0071.010- [EUR/item]
TPA - R1 - 2.5 t 1 00001 105.10
2 TPA - R1 - 5.0 t 1 00002 147.55
TPA - R1 - 10.0 t 1 00003 259.50
TPA - R1 - 26.0 t 1 00004 553.45
PU Article no. Price TPA -R2/-R3

Item name Load group
[items] 0073.060- [EUR/item] Ring clutch with cable / zinc plated (chromium6 free)
1.25/2.5/
TPA - S1 - M 8 1 00001 4.75
5.0
Lifting systems
TPA - S1 - M 12 10.0 1 00002 7.10
3 TPA - S1 - M 16 26.0 1 00003 10.45
TPA -S2 Version for Version for

load groups load groups
Bayonet retaining bolt for
1,25 - 10,0 t 26,0 t
recess formers A1 and A9
PU Article no. Price Item name PU Article no. Price

Item name Load group
4 TPA - S2 - M 8 2.5/5.0
[items]
1
0073.070-
00001
[EUR/item]
7.35
Load group
TPA - R2 - 1.25 t
[items]
1
0071.020-
00001
[EUR/item]
88.35
TPA - S2 - M 12 10.0/26.0 1 00002 9.25 TPA - R2 - 2.5 t 1 00002 106.20
TPA - R2 - 5.0 t 1 00003 143.25
TPA -V1 TPA - R2 - 10.0 t 1 00004 251.95
Breech body, TPA - R3 - 26.0 t 1 00005 581.10
Styrofoam ®
TPA -R-E1
Spare latch for ring clutches
DETAN
Zi = zinc plated
5 (chromium6 free)
TPA - V1 - 2.5 t 1 00001 0.55 TPA - R - E1 - 1.25 t -Zi 1 00001 7.10
TPA - V1 - 5.0 t 1 00002 0.75 TPA - R - E1 - 2.5 t -Zi 1 00002 8.75
TPA - V1 - 10.0 t 1 00003 1.35 TPA - R - E1 - 5.0 t -Zi 1 00003 12.25
TPA - V1 - 26.0 t 1 00004 2.15 TPA - R - E1 - 10.0 t 1 00004 27.40
Framing systems
TPA - R - E1 - 26.0 t 1 00005 48.70
6 TPA - AM
Magnetic recess former,
plastic for all anchors

except TPA-FU/-FG

Bolts, accessories

TPA - AM - 2.5 t 1 00001 140.30
7 TPA - AM - 5.0 t 1 00002 286.40
62
F R I M E DA l i ft i n g anc h o r – r i n g clutc h
TPA -F1

Ring clutch with pneumatic remote release
Note:
Manual valve for pneumatic remote release
is ordered separately. 1
Other accessories (available separately):
• Fabric hose TPA-F1-Z10, length …
• Hose coupling TPA-F1-Z4
for other accessories,
see technical product information TPA
TPA - F1 - 2.5 t 1 00001
TPA - F1 - 5.0 t 1 00002 upon
TPA - F1 - 10.0 t 1 00003 request 2
TPA - F1 - 26.0 t 1 00004
TPA -F2
Ring clutch with manual remote release
Lifting systems
3
Item name: Length of PU Article no.: Price

Load group Bowden cable [items] 0071.040- [EUR/item]

TPA - F2 - 2.5 t L = 2.5 m 1 00001
TPA - F2 - 2.5 t L = 5.0 m 1 00002 upon
TPA - F2 - 2.5 t L = 7.5 m 1 00003 request
TPA - F2 - 2.5 t L = 10.0 m 1 00004 4
TPA - F2 - 5.0 t L = 2.5 m 1 00005
upon
TPA - F2 - 5.0 t L = 5.0 m 1 00006
request
TPA - F2 - 5.0 t L = 7.5 m 1 00007
TPA - F2 - 5.0 t L = 10.0 m 1 00008
TPA - F2 - 10.0 t L = 2.5 m 1 00009

TPA - F2 - 10.0 t L = 5.0 m 1 00010 upon
DETAN
TPA - F2 - 10.0 t L = 7.5 m 1 00011 request
TPA - F2 - 10.0 t L = 10.0 m 1 00012 5
TPA - F2 - 26.0 t L = 2.5 m 1 00013
TPA - F2 - 26.0 t L = 5.0 m 1 00014 upon
TPA - F2 - 26.0 t L = 7.5 m 1 00015 request
TPA - F2 - 26.0 t L = 10.0 m 1 00016
Framing systems
6
Bolts, accessories
63
de h a h d - anc h o r
6360 6370
DEHA HD anchor and HD short anchor with Sleeve: zinc plated DEHA HD panel anchor Zinc plated (chromium6 free)
sleeve protection – increased load capacity (chromium6 free) - increased load capacity -
l
1
l
Item name l Thread ID PU Article no. Price
Load group [mm] color [items] 0740.130- [EUR/item]
6360 - 1.3 - 130 Rd12 red 25 00001 1.70 Item name Thread l ID PU Article no. Price
6360 - 2.5 - 200 Rd16 dark grey 25 00002 2.30 Load group [mm] color [items] 0740.180- [EUR/item]
6360 - 4.0 - 258 Rd20 green 25 00003 3.90 6370 - 1.3 - GV Rd12 46 red 1 00001 3.85
6360 - 5.0 - 325 Rd24 blue 1 00004 5.50 6370 - 2.5 - GV Rd16 54 dark grey 1 00002 4.30
6360 - 7.5 - 400 Rd30 bright grey 1 00005 10.55 6370 - 4.0 - GV Rd20 72 green 1 00003 6.70
2 6360 - 10.0 - 475 Rd36 orange 1 00006 20.00 6370 - 5.0 - GV Rd24 89 blue 1 00004 7.35
6360 - 12.5 - 550 Rd42 yellow 1 00007 34.35 6370 - 7.5 - GV Rd30 98 bright grey 1 00005 10.05
6360 - 15.0 - 575 Rd52 black 1 00008 37.70
6376
6360 - 1.3 - 70 Rd12 red 1 00017 1.55 DEHA HD plain anchor with hole Zinc plated (chromium6 free)
6360 - 2.5 - 90 Rd16 dark grey 1 00018 2.25
6360 - 4.0 - 125 Rd20 green 1 00019 4.30
6360 - 5.0 - 140 Rd24 blue 1 00020 5.20
Lifting systems
Other anchor lengths available upon request

l
3 6336
Identification tag Zinc plated (chromium6 free)
Item name Thread l ID PU Article no. Price

6376 - 1.3 GV Rd12 65 red 1 00001 1.55
Item name PU Article no. Price 6376 - 2.5 GV Rd16 70 dark grey 1 00002 2.50
Load group 6376 - 4.0 GV Rd20 85 green 1 00003 4.30
Thread [items] 0741.340- [EUR/item]
6336 Rd16 2.5 t 1 00001 upon request 6376 - 5.0 GV Rd24 98 blue 1 00004 6.70
4 6376 - 7.5 GV
6376 - 10.0 GV
Rd30
Rd36
115 bright grey
135 orange
1
1
00005
00006
11.15
14.95
6361
Note: for 6370 + 6376
DEHA HD rod anchor with sleeve protection Sleeve: zinc plated
Upon request, all anchors can be supplied Dacromet coated or in stainless steel.
– increased load capacity (chromium6 free)
l 6364
DEHA HD nailing plate
made of plastic
for perfect head 6333
Item name l Thread ID PU Article no. Price
DETAN

5 6361 - 1.3 - 300 Rd12 red 25 00001 1.70
6361 - 2.5 - 400 Rd16 dark grey 25 00002 3.25
Item name Thread Outer ID PU Article no. Price
6361 - 4.0 - 480 Rd20 green 25 00003 4.75
Load group Ø [mm] color [items] 0741.160- [EUR/item]
6361 - 5.0 - 540 Rd24 blue 25 00004 6.60
6364 - 1.3 Rd12 40 red 100 00001 0.15
6361 - 7.5 - 700 Rd30 bright grey 1 00005 11.50
6364 - 2.5 Rd16 40 dark grey 100 00002 0.15
6361 - 10.0 - 800 Rd36 orange 1 00006 21.30
6364 - 4.0 Rd20 55 green 100 00003 0.15
6361 - 12.5 - 920 Rd42 yellow 1 00007 32.65
6364 - 5.0 Rd24 55 blue 100 00004 0.15
Framing systems
6361 - 15.0 - 1100 Rd52 black 1 00008 41.40

6364 - 7.5 Rd30 70 bright grey 100 00005 0.35
Other anchor lengths available upon request
6364 - 10.0 Rd36 70 orange 100 00006 0.35
6 PU [items] = packaging unit [items]
6364 - 12.5 Rd42 95 yellow 100 00007 0.55
6364 - 15.0 Rd52 95 black 100 00008 0.60
Bolts, accessories
64
de h a h d - anc h o r + acce s s o r i e s
6369 6365 6362

DEHA HD nailing plate, zinc plated DEHA HD magnetic plate DEHA HD lifting hook Zinc plated (chromium6 free)
- increased load capacity -
use with retaining bolt 6160

Item name Thread Outer Ø PU Article no. Price
6369- 1.3 Rd12 40 1 00001 14.45
6369- 2.5 Rd16 40 1 00002 16.65 Item name Thread ID PU Article no. Price
6369- 4.0 Rd20 55 1 00003 25.95 Load group color [items] 0742.130- [EUR/item]
6369-
6369-
5.0
7.5
Rd24
Rd30
55
70
1
1
00004
00005
26.10
29.45
6362 - 1.3
6362 - 2.5
Rd12
Rd16
red
dark grey
1
1
00001
00002
71.80
72.00
2
6369- 10.0 Rd36 70 1 00006 38.40 6362 - 4.0 Rd20 green 1 00003 85.95
6369- 12.5 Rd42 95 1 00007 39.60 6362 - 5.0 Rd24 blue 1 00004 91.80
6369- 15.0 Rd52 95 1 00008 41.90 6362 - 7.5 Rd30 bright grey 1 00005 100.50
0741.180- 6362 - 10.0 Rd36 orange 1 00006 103.45
6365- 1.3 Rd12 40 1 00001 94.80 6362 - 12.5 Rd42 yellow 1 00007 194.25
6365- 2.5 Rd16 40 1 00002 94.80 6362 - 15.0 Rd52 black 1 00008 206.35
Lifting systems
6365- 4.0 Rd20 55 1 00003 98.95
6365- 5.0 Rd24 55 1 00004 98.95
6377
6365- 7.5 Rd30 70 1 00005 105.45 DEHA HD perfect head
3
6365- 10.0 Rd36 70 1 00006 108.50
6365- 12.5 Rd42 95 1 00007 124.60 Zinc plated (chromium6 free)
6365- 15.0 Rd52 95 1 00008 126.95
6369 – pre-fitted

DEHA HD nailing plate, Suitable for:
steel with adapter, Assembly pin 6330
pre-fitted
Item name Thread Outer Ø PU Article no. Price

6369- 2.5 - A Rd16 40 1 00102
Item name Thread ID PU Article no. Price
6369- 4.0 - A Rd20 55 1 00103 upon Load group color [items] 0742.170- [EUR/item]
6369- 5.0 - A Rd24 55 1 00104 request
DETAN
6377 - 1.3 Rd12 red 1 00001 113.75
6369- 7.5 - A Rd30 70 1 00105
6377 - 2.5 Rd16 dark grey 1 00002 114.80 5
6377 - 4.0 Rd20 green 1 00003 162.25
6330
6377 - 5.0 Rd24 blue 1 00004 173.20
Assembly pin, plastic 6377 - 7.5 Rd30 bright grey 1 00005 286.90
6377 - 10.0 Rd36 orange 1 00006 359.85
6377 - 12.5 Rd42 yellow 1 00007 370.85
6377 - 15.0 Rd52 black 1 00008 414.40
Framing systems
6366

DEHA HD adapter
6
6330- 1.3-7.5 1 00001 23.30
Item name Thread ID PU Article no. Price
Load group color [items] 0742.140- [EUR/item]
6366 - 1.3 Rd12 red 1 00001 45.15
Bolts, accessories
6366 - 2.5 Rd16 dark grey 1 00002 48.70

6366 - 4.0 Rd20 green 1 00003 55.00
6366 - 5.0 Rd24 blue 1 00004 56.60 7
6366 - 7.5 Rd30 bright grey 1 00005 67.80
6366 - 10.0 Rd36 orange 1 00006 99.90
6366 - 12.5 Rd42 yellow 1 00007 106.30
6366 - 15.0 Rd52 black 1 00008 218.50
65
de h a h d - anc h o r - acce s s o r i e s
6363
HD sleeve protection with data

carrier, plastic
1
Load group [items] 0741.170- [EUR/100 items]
6363- 1.3 1 00001 10.70
6363- 2.5 1 00002 10.90
6363- 4.0 1 00003 12.15

6363- 5.0 1 00004 13.10
6363- 7.5 1 00005 21.00
2 6363-
6363-
10.0
12.5
1
1
00006
00007
34.70
64.35
6363- 15.0 1 00008 81.55
6334
Sealing plate, rubber
Lifting systems
3
6364- 1.3 - 2.5 1 00001
6364- 4.0 - 5.0 1 00002 upon request
6364- 7.5 - 10.0 1 00003
6513
DEHA HD sealing plate, plastic
4
Item name Load Outer Ø PU Article no. Price

RD thread group [mm] [items] 0741.280- [EUR/item]
6513- 12 1.3 40 1 00001 1.75
6513- 16 2.5 40 1 00002 1.75
6513- 20 4.0 40 1 00003 2.15
DETAN
5 6513- 24 5.0 40 1 00004 2.15
6329
Stencil form,
rubber
Framing systems
6
6329- 1.3 - 2.5 1 00001 37.80
6329- 4.0 - 5.0 1 00002 52.45
6329- 7.5 - 10.0 1 00003 63.95
6329- 12.5 - 15.0 1 00004 57.15
Bolts, accessories
66
D E H A s o cket anc h o r
6351 6380

Combi anchor Crown anchor l
l
1
Thread Thread
Load group l [mm] [items] 0740.010- [EUR/item] Load group l [mm] [items] 0740.020- [EUR/item]
Electro plated sleeve (chromium6 free) Electro plated (chromium6 free)
6351- 0.5- 100 Rd12 150 00002 1.00 6380- 0.5- 60 Rd12 300 00001 1.30
6351- 0.5- 150 Rd12 100 00003 1.30 6380- 0.8- 70 Rd14 200 00002 1.60
6351- 0.8- 105 Rd14 150 00005 1.10 6380- 1.2- 80 Rd16 100 00003 1.80
6351- 0.8- 155 Rd14 100 00006 1.70 6380- 1.6- 90 Rd18 75 00004 2.45
6351- 1.2- 130 Rd16 100 00009 1.30 6380- 2.0- 100 Rd20 75 00005 3.00
6351- 1.2- 175 Rd16 25 00010 1.80 6380- 2.5- 115 Rd24 50 00006 3.85 2
6351- 1.6- 150 Rd18 50 00013 2.00 6380- 4.0- 150 Rd30 25 00007 6.80
6351- 1.6- 225 Rd18 50 00014 2.45
6351- 2.0- 183 Rd20 50 00017 2.30 SS 316 = stainless steel SS 316
6351- 2.0- 250 Rd20 1 00018 3.45 6380- 0.5- 60 -A4 Rd12 300 00008 9.10
6351- 2.5- 200 Rd24 40 00021 2.80 6380- 0.8- 70 -A4 Rd14 200 00009 12.30
6351- 2.5- 275 Rd24 1 00022 4.20 6380- 1.2- 80 -A4 Rd16 100 00010 14.75
6351- 4.0- 275 Rd30 1 00026 5.45 6380- 2.0- 100 -A4 Rd20 75 00011 26.40
Lifting systems
6351- 4.0- 350 Rd30 1 00027 6.45 6380- 2.5- 115 -A4 Rd24 50 00012 37.10
6351- 6.3-
6351- 6.3-
334
450
Rd36
Rd36
1
1
00029
00030
9.35
14.75
6380- 4.0- 150 -A4 Rd30 25 00013 64.35
3
6351- 8.0- 385 Rd42 1 00031 14.90 6372
6351- 8.0- 500 Rd42 1 00032 18.75 Plain anchor with hole l
6351- 12.5- 550 Rd52 1 00033 40.70
6351- 12.5- 700 Rd52 1 00034 50.95

SS 316 = stainless steel SS 316 sleeve, sealed to protect against corrosion
6351- 0.5- 100 A4 Rd12 150 00036 7.55 Item name PU Article no. Price
Thread
6351- 0.8- 105 A4 Rd14 150 00038 9.10 Load group l [mm] [items] 0740.040- [EUR/item]
6351-
6351-
1.2-
1.6-
130 A4
150 A4
Rd16
Rd18
100
50
00040
00041
12.55
19.15
Electro plated (chromium6 free)
6372- 0.5- 50 Rd12 300 00001 0.95
4
6351- 2.0- 183 A4 Rd20 50 00042 23.10 6372- 0.8- 54 Rd14 200 00002 1.30
6351- 2.5- 200 A4 Rd24 40 00044 27.45 6372- 1.2- 61 Rd16 150 00003 1.60
6351- 4.0- 275 A4 Rd30 1 00046 64.05 6372- 1.6- 70 Rd18 100 00004 1.95
6351- 6.3- 334 A4 Rd36 1 00047 91.80 6372- 2.0- 73 Rd20 75 00005 2.20
6351- 8.0- 385 A4 Rd42 1 00048 138.95 6372- 2.5- 86 Rd24 50 00006 3.00
6351- 12.5- 550 A4 Rd52 1 00049 179.20 6372- 4.0- 107 Rd30 25 00007 5.15
6372- 6.3- 136 Rd36 1 00008 24.75
6319
DETAN
Rod anchor SS 316 = stainless steel SS 316 5
l 6372- 0.5-A4- 50 Rd12 300 00009 8.25
6372- 0.8-A4- 54 Rd14 200 00016 upon request
6372- 1.2-A4- 61 Rd16 150 00011 13.00
6372- 1.6-A4- 70 Rd18 100 00012
Item name PU Article no. Price 6372- 2.0-A4- 73 Rd20 75 00013
Thread upon
Load group l [mm] [items] 0740.030- [EUR/item] 6372- 2.5-A4- 86 Rd24 50 00014
request
Electro plated sleeve (chromium6 free) 6372- 4.0-A4- 107 Rd30 25 00015
Framing systems
6319 - 0.5- 190 Rd12 100 00001 1.10 6372- 6.3-A4- 136 Rd36 1 00017
6319 - 0.8-
6319 - 1.2-
230
270
Rd14
Rd16
50
50
00003
00004
1.60
1.75
6
6319 - 1.6- 310 Rd18 1 00006 2.45
6319 - 2.0- 350 Rd20 1 00007 2.95
6319 - 2.5- 400 Rd24 1 00010 3.85
6319 - 4.0- 540 Rd30 1 00012 5.65
6319 - 6.3- 670 Rd36 1 00013 10.80
6319 - 8.0- 780 Rd42 1 00014 15.55
Bolts, accessories
6319- 12.5- 1100 Rd52 1 00015 38.70

Other lengths available upon request.
Sleeve available in stainless steel upon request. 7
Accessories (nail plate, data carrier, plugs) → pages 68 - 69
67
D E H A s o cket anc h o r acce s s o r i e s
6346 6358
Threaded panel anchor Combi nailing plate,

plastic,
for perfect head type 6313
1 l
(→ page 70)
Suitable for Rd and M threads
Item name Outer Height PU Article no. Price

Color
Item name Thread PU Article no. Price Thread Ø [mm] [mm] [Item] 0741.040- [EUR/item]
Load group l [mm] [items] 0740.050- [EUR/item] 6358-12 orange 40 10 100 00001 0.15
Electro plated sleeve (chromium6 free) 6358-14 white 40 10 100 00002 0.15
6346- 12- 30 Rd12 100 00001 3.75 6358-16 red 40 10 100 00003 0.15
6346- 14- 33 Rd14 100 00002 3.80 6358-18 pink 55 10 100 00004 0.15
2 6346- 16- 35 Rd16 100 00003 4.20 6358-20 bright green 55 10 100 00005 0.15
6346- 18- 44 Rd18 50 00004 5.05 6358-24 dark grey 55 10 100 00006 0.15
6346- 20- 47 Rd20 50 00005 6.00 6358-30 dark green 70 10 100 00007 0.35
6346- 24- 54 Rd24 50 00006 6.40 6358-36 blue 70 10 100 00008 0.35
6346- 30- 72 Rd30 25 00007 9.55 6358-42 bright grey 95 12 100 00009 0.55
6346- 36- 84 Rd36 1 00015 upon request 6358-52 yellow 95 12 100 00010 0.60
SS 316 = stainless steel SS 316

Lifting systems
6346- 12 A4- 30 Rd12 100 00008 15.35 6510

3 6346- 14 A4-
6346- 16 A4-
33
35
Rd14
Rd16
100
100
00009
00010
18.30
20.70
Combi nailing plate with steel core and replaceable ring,
for perfect head type 6313
6346- 18 A4- 44 Rd18 50 00011 27.60 (→ page 70)
6346- 20 A4- 47 Rd20 50 00012 32.70
6346- 24 A4- 54 Rd24 50 00013 45.40
6346- 30 A4- 72 Rd30 25 00014 69.30
6346- 36 A4- 84 Rd36 1 00016 upon request Suitable for
Rd and M thread
6316
Nailing plate, Item name Outer Ø Height h PU Article no. Price
4 plastic Thread
6510-12
[mm]
40
[mm]
10
[items]
10
0741.080-
00001
[EUR/item]
12.00
6510-14 40 10 10 00002 12.00
6510-16 40 10 10 00003 12.95
Suitable for
Rd and M thread 6510-18 55 10 10 00004 13.85
6510-20 55 10 10 00005 13.85
6510-24 55 10 10 00006 14.95
Item name Outer Ø Height PU Article no. Price 6510-30 70 10 10 00007 26.30
Thread [mm] [mm] [items] 0741.010- [EUR/item] 6510-36 70 10 10 00008 31.30
6316-12 0.35
DETAN
58 10 100 00001
5 6316-14 58 10 100 00002 0.35 6512
6316-16 58 10 100 00003 0.35
Replaceable ring
6316-18 58 10 100 00004 0.35
for 6510
6316-20 58 10 100 00005 0.45 (→ see above)
6316-24 58 10 100 00007 0.45
6316-30 58 10 100 00008 0.45
Framing systems
Item name Outer Ø Height h PU Article no. Price

6 Thread
6512-12
[mm]
40
[mm]
10
[items]
10
0741.090-
00001
[EUR/item]
0.95
6512-14 40 10 10 00002 0.95
6512-16 40 10 10 00003 0.95
6512-18 55 10 10 00004 1.00
6512-20 55 10 10 00005 1.00
6512-24 55 10 10 00006 1.00
6512-30 70 10 10 00007 1.30
Bolts, accessories
6512-36 70 10 10 00008 1.30
68
D E H A s o cket anc h o r acce s s o r i e s
6357 6359

Plastic data carrier, for rod anchor 6319 Sealing plug,
and rod anchor 6361,combi anchor 6351, for rod anchor 6319,
crown anchor 6380 and combi anchor 6351, crown anchor 6380 and
plain anchor with hole 6372 (→ page 67)
plain anchor with hole 6372 (→ page 67)
1
Color identification Color identification
of thread [items] 0741.110- [EUR/100 items] Thread [items] 0741.120- [EUR/100 items]
6357-12 orange 100 00001 10.10 6359- 12 orange 100 00001 5.05
6357-14 white 100 00002 10.10 6359- 14 white 100 00002 5.05
6357-16 red 100 00003 10.10 6359- 16 red 100 00003 6.70
6357-18 pink 100 00004 10.10 6359- 18 pink 100 00004 6.70
6357-20 bright green 100 00005 11.75 6359- 20 bright green 100 00005 6.70
6357-24 dark grey 100 00006 11.75 6359- 24 dark grey 100 00006 6.70
6357-30 dark green 100 00007 18.55 6359- 30 dark green 100 00007 10.10
6357-36 blue 100 00008 18.55 6359- 36 blue 100 00008 10.10 2
6357-42 bright grey 100 00009 26.95 6359- 42 bright grey 100 00009 21.90
6357-52 yellow 100 00010 26.95 6359- 52 yellow 100 00010 21.90
6303 6306
Adapter for universal head clutch 6102 Adhesive fixing plate,
in conjunction with socket anchor for sticking socket anchors to
with Rd thread. the formwork; suitable for Rd and M threads
Lifting systems
Use nail plate 6314 or 6321
(→ page below) Item name
Thread
Outer Ø
[mm]
Height h PU Article no.
[mm] [items] 0741.100-
Price
[EUR/item] 3
6306- 10 50 3 500 00001 0.30
Item name Load Thread for uni- Outer PU Article no. Price
6306- 12 50 3 500 00002 0.30
group Rd/M versal- Ø [Items]
6306- 16 50 3 500 00003 0.30
head type [mm] 0742.090- [EUR/item]
6306- 20 50 3 500 00004 0.30
GV = Electro plated
6306- 24 50 3 500 00005 0.30

6303-12 0.5 12 1/1.3 70 1 00001 17.00
6303-14 0.8 14 1.5/2.5 78 1 00002 18.70
6315
6303-16 1.2 16 1.5/2.5 78 1 00003 18.70
Sealing plug,
6303-18
6303-20
1.6
2.0
18
20
1.5/2.5
3/5
78
97
1
1
00004
00005
19.50
57.80
for rod anchor 6319, combi anchor 6351,
crown anchor 6380, panel anchor 6346 and
4
6303-24 2.5 24 3/5 97 1 00006 67.15 plain anchors with holes 6372 (→ pages 67 - 68)
6303-30 4.0 30 3/5 97 1 00007 76.85 Color: pearl grey
6303-36 6.3 36 6/10 117 1 00008 118.45
6303-42 8.0 42 6/10 117 1 00009 123.10 Thread [items] 0741.130- [EUR/100 items]
6303-52 12.5 52 12/20 177 1 00010 258.85
6315- 12 100 00001 10.10
6315- 14 100 00002 13.45
6321 6322 6315- 16 100 00003 13.45
Nail plate with steel core and Individual replaceable ring
DETAN
6315- 18 100 00004 18.55
replaceable ring for adapter 6303-Rd
Suitable for Rd and M threads
6315- 20 100 00005 18.55 5
6315- 24 100 00006 18.55
6315- 30 100 00007 21.90
6315- 36 100 00008 23.60
6315- 42 100 00009 25.25
6315- 52 100 00010 28.60
Framing systems
Item Thread Outer Ø Height PU Article no. Price 6

name [mm] [mm] [items] 0741.060- [EUR/item]
6321-12 Rd12 50 10 250 00001 2.50
6321-14 Rd14 58 10 200 00002 3.40
6321-16 Rd16 58 10 250 00003 3.45
6321-18 Rd18 58 10 200 00004 5.05
6321-20 Rd20 70 10 100 00005 5.90
Bolts, accessories
6321-24 Rd24 70 10 100 00006 6.05

6321-30 Rd30 70 10 100 00007 7.35
6322-12 Rd12 50 10 10
0741.070-
00001 0.90
7
6322-14/18 Rd14-18 58 10 10 00002 0.90
6322-20/30 Rd20-30 70 10 10 00003 1.10
69
de h a s o cket anc h o r , l i ft i n g dev i ce
6313
Perfect head lifter

for rod anchor 6319,
Combi anchor 6351,
1 crown anchor 6380 and
plain anchor with hole 6372
(→ page 67)
Use nailing plate 6358 or 6510 (→ page 68)
Item name Load Color PU Article no. Price

Thread group ID [items] 0742.060- [EUR/item]

6313-12 0.5 orange 1 00001 59.45
6313-14 0.8 white 1 00002 62.95
2 6313-16 1.2 red 1 00003 66.15
6313-18 1.6 pink 1 00004 86.25
6313-20 2.0 bright green 1 00005 90.45
6313-24 2.5 dark grey 1 00006 102.75
6313-30 4.0 dark green 1 00007 167.85
6313-36 6.3 blue 1 00008 207.00
6313-42 8.0 bright grey 1 00009 439.35
6313-52 12.5 yellow 1 00010 491.10
Lifting systems
3 6311
Loop lifter
for rod anchor 6319,
Combi anchor 6351,
crown anchor 6380,
panel anchor 6346 and plain anchor
with holes 6372
with Rd thread (→ pages 67 - 68)
4 Item name
Thread
Load
group
Color
ID
PU Article no.
[items] 0742.040-
Price
[EUR/item]
6311-12 0.5 orange 10 00001 9.25
6311-14 0.8 white 10 00002 9.35
6311-16 1.2 red 10 00003 12.95
6311-18 1.6 pink 10 00004 15.30
6311-20 2.0 bright green 10 00005 18.05
6311-24 2.5 dark grey 10 00006 21.00
6311-30 4.0 dark green 1 00007 32.85
DETAN
6311-36 6.3 blue 1 00008 63.40

5 6311-42 8.0 bright grey 1 00009 79.20
6311-52 12.5 yellow 1 00010 131.00
Note: 6311 with M thread same price as Rd thread
Framing systems
6
Bolts, accessories
70

Features Benefits
▪ Adjustable anchor system for Quick and easy assembly

precast façade panels
1
Satisfies heat insulation
▪ Extensive range of types and load requirements
to accommodate large façade cavities
and high loads Suitable for all conditions
reinforcement systems
▪ High quality stainless steel
2
HALFEN FPA
precast panel anchor for
concrete precast façades
lifting systems
3
Features Benefits

Available to suit individual
▪ Three load types in one
customer requirements
extensive product range
Reliable performance 4
▪ Type tested
▪ Excellent height adjustment Easy to assemble
HALFEN HK4 support
of +/- 3.5 cm
bracket for brickwork
support systems
Detan
5
framing systems
Features Benefits
▪ Can be attached to the structure

6
Rapid installation
using HALFEN anchor channels or
Range covers all
drilled bolts
applications
▪ Large range of anchors
Precise positioning of
Bolts, accessories
▪ Can be adjusted precisely in

stone façade for perfect
three dimensions
HALFEN body anchors for façade appearance
7
natural stone façades
71
71
h a l f e n p r e c a s t pa n e l a n c h o r
FPA - 3 - Continuation of left column -

HALFEN precast panel anchor, FPA-3 HALFEN precast panel anchor

type tested, material: stainless steel SS 316 Item name Article no. Price
Load group Distance of wall b
1 FPA-3-R:
(structural
Support arm and
recess former
[kN] from/to [mm]
FPA - 3 - G = complete set
0240.080- [EUR/item]
component)
FPA - 3 - G - 22.0 - 40/ 130 00009 99.45
FPA-3-M: Perforated strap with
(assembly Oscillating bolt, nut, FPA - 3 - G - 22.0 - 140/ 240 00010 107.70
component) locking bolt FPA - 3 - G - 34.0 - 40/ 120 00011 166.30
FPA - 3 - G - 34.0 - 130/ 210 00012 176.30
FPA-3/5-E: U-shaped bracket with
(installation angle cleat and recess FPA - 3 - G - 46.0 - 50/ 120 00013 305.20
component) former FPA - 3 - G - 46.0 - 130/ 220 00014 321.50

FPA-3-G: Structural component FPA - 3 - G - 56.0 - 60/ 120 00015 369.80
(complete set) + assembly component FPA - 3 - G - 56.0 - 130/ 230 00016 391.85
2 + installation component
FPA - 5
Item name Article no. Price HALFEN precast panel anchor,
Load group Distance of wall b type tested, material: stainless steel SS 316
[kN] from/to [mm] 0240.110- [EUR/item]
FPA - 3 - R = structural component FPA-5-M: Perforated strap with nut,
FPA - 3 - R - 5.0 00001 10.45 (assembly washer, locking
FPA - 3 - R - 8.0 00002 11.40 component) bolt and stirrup
Lifting systems
FPA - 3 - R - 11.5 00003 14.25 FPA-3/5-E: U-shaped bracket with

3 FPA - 3 - R - 16.0
FPA - 3 - R - 22.0
00004
00005
17.40
22.10
(installation
component)
angle cleat and recess
former
FPA - 3 - R - 34.0 00006 41.90 FPA-5-G: Assembly component
FPA - 3 - R - 46.0 00007 56.50 (complete set) + installation component
FPA - 3 - R - 56.0 00008 70.35
FPA - 3 - M = assembly component 0240.220-

FPA - 3 - M - 5.0 - 40/ 120 00001 16.25
FPA - 3 - M - 5.0 - 130/ 220 00002 18.05
FPA - 3 - M - 8.0 - 40/ 120 00003 18.30
4 FPA - 3 - M - 8.0 - 130/ 220 00004 21.15

Load group Distance of wall b
[kN] from/to [mm] 0240.170- [EUR/item]
FPA - 3 - M - 11.5 - 40/ 130 00005 23.15
FPA - 5 - M = assembly component
FPA - 3 - M - 11.5 - 140/ 220 00006 27.00
FPA - 5 - M - 5.0 - 60/ 100 00001 22.55
FPA - 3 - M - 16.0 - 40/ 120 00007 30.35
FPA - 5 - M - 5.0 - 110/ 180 00002 23.65
FPA - 3 - M - 16.0 - 130/ 200 00008 34.95
FPA - 5 - M - 5.0 - 190/ 280 00003 25.55
FPA - 3 - M - 22.0 - 40/ 130 00009 45.60
FPA - 5 - M - 8.0 - 60/ 110 00004 26.10
FPA - 3 - M - 22.0 - 140/ 240 00010 54.00
FPA - 5 - M - 8.0 - 120/ 180 00005 27.50
FPA - 3 - M - 34.0 - 40/ 120 00011 69.65
FPA - 5 - M - 8.0 - 190/ 260 00006 30.25
FPA - 3 - M - 34.0 - 130/ 210 00012 79.65
DETAN
FPA - 5 - M - 11.5 - 60/ 120 00007 33.70

5 FPA - 3 - M - 46.0 - 50/ 120
FPA - 3 - M - 46.0 - 130/ 220
00013
00014
122.50
138.70
FPA - 5 - M - 11.5 - 130/ 190 00008 35.50
FPA - 5 - M - 11.5 - 200/ 290 00009 39.40
FPA - 3 - M - 56.0 - 60/ 120 00015 160.75
FPA - 5 - M - 16.0 - 60/ 140 00010 44.40
FPA - 3 - M - 56.0 - 130/ 230 00016 182.80
FPA - 5 - M - 16.0 - 150/ 190 00011 45.85
FPA - 5 - M - 16.0 - 200/ 280 00012 50.40
FPA - 3 - E = installation component 0240.250-
FPA - 5 - M - 22.0 - 60/ 140 00013 51.00
FPA - 3 - E - 5.0 00001 15.15
FPA - 5 - M - 22.0 - 150/ 200 00014 55.35
FPA - 3 - E - 8.0 00002 17.10
FPA - 5 - M - 22.0 - 210/ 320 63.50
Framing systems
00015
FPA - 3 - E - 11.5 00003 21.20
FPA - 5 - M - 34.0 - 70/ 160 00016 80.75
FPA - 3 - E - 16.0 00004 27.55
6 FPA - 3 - E - 22.0 00005 31.55
FPA - 5 - M - 34.0 - 170/ 220
FPA - 5 - M - 34.0 - 230/ 310
00017
00018
84.20
94.20
FPA - 3 - E - 34.0 00006 54.80
FPA - 5 - M - 46.0 - 90/ 160 00019 163.30
FPA - 3 - E - 46.0 00007 126.20
FPA - 5 - M - 46.0 - 170/ 230 00020 168.85
FPA - 3 - E - 56.0 00008 138.70
FPA - 5 - M - 46.0 - 240/ 310 00021 184.95
FPA - 5 - M - 56.0 - 100/ 190 00022 212.90
FPA - 3 - G = complete component 0240.080-
FPA - 5 - M - 56.0 - 200/ 250 00023 220.50
FPA - 3 - G - 5.0 - 40/ 120 00001 41.75
FPA - 5 - M - 56.0 - 260/ 350 00024 242.55
FPA - 3 - G - 5.0 - 130/ 220 00002 43.70
Bolts, accessories
FPA - 3 - G - 8.0 - 40/ 120 00003 46.65

FPA - 5 - E = FPA - 3/5 - E = installation component 0240.250-
FPA - 3 - G - 8.0 - 130/ 220 49.50
7 FPA - 3 - G - 11.5 - 40/ 130
00004
00005 58.55
FPA-3/5 -E - 5.0 00001 15.15
FPA-3/5 -E - 8.0 00002 17.10
FPA - 3 - G - 11.5 - 140/ 220 00006 62.50
FPA-3/5 -E - 11.5 00003 21.20
FPA - 3 - G - 16.0 - 40/ 120 00007 75.40
FPA-3/5 -E - 16.0 00004 27.55
FPA - 3 - G - 16.0 - 130/ 200 00008 80.00
- continued on next page -
- continued on right column -
72
- Continuation of previous page - - Continuation of left column -

FPA-5 HALFEN precast panel anchor FPA-5Z HALFEN precast panel anchor
Load group Distance of wall b Load group Distance of wall b
[kN] from/to [mm]
FPA-3/5 -E - 22.0
0240.250-
00005
[EUR/item]
31.55
[kN] from/to [mm]
FPA - 5Z - M = assembly component
0240.200- [EUR/item]
1
FPA-3/5 -E - 34.0 00006 54.80 FPA - 5Z - M - 16.0 - 60/ 140 00010 55.80
FPA-3/5 -E - 46.0 00007 126.20 FPA - 5Z - M - 16.0 - 150/ 190 00011 57.20
FPA-3/5 -E - 56.0 00008 138.70 FPA - 5Z - M - 16.0 - 200/ 280 00012 61.75
FPA - 5Z - M - 22.0 - 60/ 140 00013 63.50
FPA - 5 - G = complete set 0240.030- FPA - 5Z - M - 22.0 - 150/ 200 00014 67.85
FPA - 5 - G - 5.0 - 60/ 100 00001 37.60 FPA - 5Z - M - 22.0 - 210/ 320 00015 76.20
FPA - 5 - G - 5.0 - 110/ 180 00002 38.70 FPA - 5Z - M - 34.0 - 70/ 160 00016 90.50
FPA - 5 - G - 5.0 - 190/ 280 00003 40.65 FPA - 5Z - M - 34.0 - 170/ 220 00017 93.95
FPA - 5 - G - 8.0 - 60/ 110 00004 43.10 FPA - 5Z - M - 34.0 - 230/ 310 00018 101.30 2
FPA - 5 - G - 8.0 - 120/ 180 00005 44.60 FPA - 5Z - M - 46.0 - 90/ 160 00019 101.40
FPA - 5 - G - 8.0 - 190/ 260 00006 47.35 FPA - 5Z - M - 46.0 - 170/ 230 00020 109.75
FPA - 5 - G - 11.5 - 60/ 120 00007 54.85 FPA - 5Z - M - 46.0 - 240/ 310 00021 120.45
FPA - 5 - G - 11.5 - 130/ 190 00008 56.65 FPA - 5Z - M - 56.0 - 100/ 190 00022 177.45
FPA - 5 - G - 11.5 - 200/ 290 00009 60.65 FPA - 5Z - M - 56.0 - 200/ 250 00023 193.45
FPA - 5 - G - 16.0 - 60/ 140 00010 72.00 FPA - 5Z - M - 56.0 - 260/ 350 00024 206.70
FPA - 5 - G - 16.0 - 150/ 190 00011 73.40
Lifting systems
FPA - 5 - G - 16.0 - 200/ 280 00012 77.95 FPA - 5Z - E = FPA - 3/5 - E = installation component 0240.250-
FPA - 5 - G - 22.0 - 60/ 140
FPA - 5 - G - 22.0 - 150/ 200
00013
00014
82.50
86.75
FPA - 3/5 - E - 5.0
FPA - 3/5 - E - 8.0
00001
00002
15.15
17.10 3
FPA - 5 - G - 22.0 - 210/ 320 00015 95.10 FPA - 3/5 - E - 11.5 00003 21.20
FPA - 5 - G - 34.0 - 70/ 160 00016 135.45 FPA - 3/5 - E - 16.0 00004 27.55
FPA - 5 - G - 34.0 - 170/ 220 00017 138.90 FPA - 3/5 - E - 22.0 00005 31.55
FPA - 5 - G - 34.0 - 230/ 310 00018 148.95 FPA - 3/5 - E - 34.0 00006 54.80
FPA - 5 - G - 46.0 - 90/ 160 00019 289.45 FPA - 3/5 - E - 46.0 00007 126.20

FPA - 5 - G - 46.0 - 170/ 230 00020 295.00 FPA - 3/5 - E - 56.0 00008 138.70
FPA - 5 - G - 46.0 - 240/ 310 00021 311.15
FPA - 5 - G - 56.0 - 100/ 190 00022 351.65 FPA - 5Z - G = complete set 0240.060-
FPA - 5 - G - 56.0 - 200/ 250
FPA - 5 - G - 56.0 - 260/ 350
00023
00024
359.15
381.20
FPA - 5Z - G - 5.0 - 60/ 100
FPA - 5Z - G - 5.0 - 110/ 180
00001
00002
54.00
55.15
4
FPA - 5Z - G - 5.0 - 190/ 280 00003 57.05
FPA - 5 Z FPA - 5Z - G - 8.0 - 60/ 110 00004 58.85
HALFEN precast panel anchor with two-point connection FPA - 5Z - G - 8.0 - 120/ 180 00005 60.20
Material: stainless steel SS 316 FPA - 5Z - G - 8.0 - 190/ 260 00006 62.95
FPA - 5Z - G - 11.5 - 60/ 120 00007 69.40
FPA-5Z-M: Perforated strap with nut, FPA - 5Z - G - 11.5 - 130/ 190 00008 71.20
(assembly washer, locking FPA - 5Z - G - 11.5 - 200/ 290 00009 75.00
DETAN
component) bolt and two-point connection FPA - 5Z - G - 16.0 - 60/ 140 00010 83.35
FPA - 5Z - G - 16.0 - 150/ 190 00011 84.75 5
FPA-3/5-E: U-shaped bracket with FPA - 5Z - G - 16.0 - 200/ 280 00012 89.35
(installation angle cleat and recess
FPA - 5Z - G - 22.0 - 60/ 140 00013 95.10
component) former
FPA - 5Z - G - 22.0 - 150/ 200 00014 99.45
FPA - 5Z - G - 22.0 - 210/ 320 00015 107.70
FPA-5Z-G: Assembly component
FPA - 5Z - G - 34.0 - 70/ 160 00016 145.25
(complete set) + installation component
FPA - 5Z - G - 34.0 - 170/ 220 00017 148.70
FPA - 5Z - G - 34.0 - 230/ 310 158.65
Framing systems
00018
FPA - 5Z - G - 46.0 - 90/ 160 00019

FPA - 5Z - G - 46.0 - 170/ 230
FPA - 5Z - G - 46.0 - 240/ 310
00020
00021
6
upon request
Load group Distance of wall b FPA - 5Z - G - 56.0 - 100/ 190 00022
[kN] from/to [mm] 0240.200- [EUR/item] FPA - 5Z - G - 56.0 - 200/ 250 00023
FPA - 5Z - M = assembly component FPA - 5Z - G - 56.0 - 260/ 350 00024
FPA - 5Z - M - 5.0 - 60/ 100 00001 38.95
FPA - 5Z - M - 5.0 - 110/ 180 00002 40.00
FPA - 5Z - M - 5.0 - 190/ 280 00003 41.95
Bolts, accessories
FPA - 5Z - M - 8.0 - 60/ 110 00004 41.75

FPA - 5Z - M - 8.0 - 120/ 180 00005 43.10
FPA - 5Z - M - 8.0 - 190/ 260 00006 45.95 7
FPA - 5Z - M - 11.5 - 60/ 120 00007 48.15
FPA - 5Z - M - 11.5 - 130/ 190 00008 49.95
FPA - 5Z - M - 11.5 - 200/ 290 00009 53.95
73
FPA - 5 A FPA - 5 A Z
HALFEN precast panel anchor, attic version HALFEN precast panel anchor, attic version
Material: stainless steel SS 316 with two-point connection
Material: stainless steel SS 316
1 FPA-5A-M: Perforated strap with nut, washer,
(assembly locking bolt, stirrup FPA-5AZ-M: Perforated strap with nut, washer,
component) and edge protection bracket (loose) (assembly locking bolt, two-point connection and
component) 2 edge protection brackets (loose)
FPA-3/5-E: U-shaped bracket with
(installation angle cleat and recess FPA-3/5-E: U-shaped bracket with
former (installation angle cleat and recess
component)
component) former
FPA-5A-G: Assembly component
FPA-5AZ-G: Assembly component
(cpmlete set) + installation component
2 (complete set) + installation component
Load group Distance of wall b Load group Distance of wall b
[kN] from/to [mm] 0240.180- [EUR/item] [kN] from/to [mm] 0240.210- [EUR/item]
FPA - 5A - M = assembly component FPA - 5AZ - M = assembly component
FPA - 5A - M - 5.0 - 60/ 100 00001 37.35 FPA - 5AZ - M - 5.0 - 60/ 100 00001 52.10
Lifting systems
FPA - 5A - M - 5.0 - 110/ 180 00002 38.50 FPA - 5AZ - M - 5.0 - 110/ 180 00002 53.30
3 FPA - 5A - M - 5.0 - 190/ 280
FPA - 5A - M - 8.0 - 60/ 110
00003
00004
40.50
42.70
FPA - 5AZ - M - 5.0 - 190/ 280
FPA - 5AZ - M - 8.0 - 60/ 110
00003
00004
55.15
56.50
FPA - 5A - M - 8.0 - 120/ 180 00005 44.10 FPA - 5AZ - M - 8.0 - 120/ 180 00005 57.95
FPA - 5A - M - 8.0 - 190/ 260 00006 46.85 FPA - 5AZ - M - 8.0 - 190/ 260 00006 60.70
FPA - 5A - M - 11.5 - 60/ 120 00007 53.60 FPA - 5AZ - M - 11.5 - 60/ 120 00007 63.75
FPA - 5A - M - 11.5 - 130/ 190 00008 55.40 FPA - 5AZ - M - 11.5 - 130/ 190 00008 65.45
FPA - 5A - M - 11.5 - 200/ 290 00009 59.30 FPA - 5AZ - M - 11.5 - 200/ 290 00009 69.45
FPA - 5A - M - 16.0 - 60/ 140 00010 69.40 FPA - 5AZ - M - 16.0 - 60/ 140 00010 71.45
FPA - 5A - M - 16.0 - 150/ 190 00011 70.75 FPA - 5AZ - M - 16.0 - 150/ 190 00011 72.85
FPA - 5A - M - 16.0 - 200/ 280 00012 75.30 FPA - 5AZ - M - 16.0 - 200/ 280 00012 77.45
4 FPA - 5A - M - 22.0 - 60/ 140 00013 80.60 FPA - 5AZ - M - 22.0 - 60/ 140 00013 84.00
FPA - 5A - M - 22.0 - 150/ 200 00014 84.90 FPA - 5AZ - M - 22.0 - 150/ 200 00014 88.25
FPA - 5A - M - 22.0 - 210/ 320 00015 93.25 FPA - 5AZ - M - 22.0 - 210/ 320 00015 96.65
FPA - 5A - M - 34.0 - 70/ 160 00016 132.35 FPA - 5AZ - M - 34.0 - 70/ 160 00016 116.80
FPA - 5A - M - 34.0 - 170/ 220 00017 135.75 FPA - 5AZ - M - 34.0 - 170/ 220 00017 120.15
FPA - 5A - M - 34.0 - 230/ 310 00018 145.70 FPA - 5AZ - M - 34.0 - 230/ 310 00018 130.20
FPA - 5A - E = FPA - 3/5 - E = installation component 0240.250- FPA - 5AZ - E = FPA - 3/5 - E = installation component 0240.250-
FPA - 3/5 - E - 5.0 00001 15.15 FPA - 3/5 - E - 5.0 00001 15.15
DETAN
5 FPA - 3/5 - E - 8.0

FPA - 3/5 - E - 11.5
00002
00003
17.10
21.20
FPA - 3/5 - E - 8.0
FPA - 3/5 - E - 11.5
00002
00003
17.10
21.20
FPA - 3/5 - E - 16.0 00004 27.55 FPA - 3/5 - E - 16.0 00004 27.55
FPA - 3/5 - E - 22.0 00005 31.55 FPA - 3/5 - E - 22.0 00005 31.55
FPA - 3/5 - E - 34.0 00006 54.80 FPA - 3/5 - E - 34.0 00006 54.80
FPA - 5A - G = complete set 0240.040- FPA - 5AZ - G = complete set 0240.070-

FPA - 5A - G - 5.0 - 60/ 100 00001 52.40 FPA - 5AZ - G - 5.0 - 60/ 100 00001 67.25
Framing systems
FPA - 5A - G - 5.0 - 110/ 180 00002 53.65 FPA - 5AZ - G - 5.0 - 110/ 180 00002 68.45
FPA - 5A - G - 5.0 - 190/ 280 00003 55.60 FPA - 5AZ - G - 5.0 - 190/ 280 00003 70.30
6 FPA - 5A - G - 8.0 - 60/ 110
FPA - 5A - G - 8.0 - 120/ 180
00004
00005
59.75
61.10
FPA - 5AZ - G - 8.0 - 60/ 110
FPA - 5AZ - G - 8.0 - 120/ 180
00004
00005
73.60
74.95
FPA - 5A - G - 8.0 - 190/ 260 00006 63.85 FPA - 5AZ - G - 8.0 - 190/ 260 00006 77.75
FPA - 5A - G - 11.5 - 60/ 120 00007 74.75 FPA - 5AZ - G - 11.5 - 60/ 120 00007 84.90
FPA - 5A - G - 11.5 - 130/ 190 00008 76.60 FPA - 5AZ - G - 11.5 - 130/ 190 00008 86.70
FPA - 5A - G - 11.5 - 200/ 290 00009 80.55 FPA - 5AZ - G - 11.5 - 200/ 290 00009 90.70
FPA - 5A - G - 16.0 - 60/ 140 00010 96.95 FPA - 5AZ - G - 16.0 - 60/ 140 00010 99.10
FPA - 5A - G - 16.0 - 150/ 190 00011 98.30 FPA - 5AZ - G - 16.0 - 150/ 190 00011 100.45
Bolts, accessories
FPA - 5A - G - 16.0 - 200/ 280 00012 102.90 FPA - 5AZ - G - 16.0 - 200/ 280 00012 105.00
FPA - 5A - G - 22.0 - 60/ 140 00013 112.15 FPA - 5AZ - G - 22.0 - 60/ 140 00013 115.55
7 FPA - 5A - G - 22.0 - 150/ 200 00014 116.40 FPA - 5AZ - G - 22.0 - 150/ 200 00014 119.85
FPA - 5A - G - 22.0 - 210/ 320 00015 124.80 FPA - 5AZ - G - 22.0 - 210/ 320 00015 128.25
FPA - 5A - G - 34.0 - 70/ 160 00016 187.00 FPA - 5AZ - G - 34.0 - 70/ 160 00016 171.55
FPA - 5A - G - 34.0 - 170/ 220 00017 190.45 FPA - 5AZ - G - 34.0 - 170/ 220 00017 174.95
FPA - 5A - G - 34.0 - 230/ 310 00018 200.50 FPA - 5AZ - G - 34.0 - 230/ 310 00018 184.95
74
h a l f e n pa r a p e t co r b e l
B RA - N B RA - A

HALFEN parapet corbel, HALFEN parapet corbel, attic version
type tested, type tested, material: stainless steel SS 316
normal version l b
without
height adjustment screw
1
l
b -A
Material: stainless steel SS 316 Attic
Item Basic measurement b*) Profile length Article no. Price Item Basic measurement b*) Profile length Article no. Price
name. from/to [mm] l [mm] 0242.120- [EUR/item] name. from/to [mm] l [mm] 0242.110- [EUR/item]
BRA-N 1 - 0/40 -A4 400 00002 47.10 BRA-A 1 - 0/40 -A4 400 00002 47.10
BRA-N 1 - 60/100 -A4 450 00003 50.45 BRA-A 1 - 60/100 -A4 450 00003 50.45
BRA-N 1 - 120/140 -A4 500 00004 53.85 BRA-A 1 - 120/140 -A4 500 00004 53.85 2
BRA-N 2 - 0/40 -A4 450 00009 54.45 BRA-A 2 - 0/40 -A4 450 00009 54.45
BRA-N 2 - 60/100 -A4 500 00010 58.25 BRA-A 2 - 60/100 -A4 500 00010 58.25
BRA-N 2 - 120/140 -A4 550 00011 62.05 BRA-A 2 - 120/140 -A4 550 00011 62.05
BRA-N 3 - 0/40 -A4 500 00016 77.10 BRA-A 3 - 0/40 -A4 500 00016 77.10
BRA-N 3 - 60/100 -A4 550 00017 82.55 BRA-A 3 - 60/100 -A4 550 00017 82.55
Lifting systems
BRA-N 3 - 120/140 -A4 600 00018 88.05 BRA-A 3 - 120/140 -A4 600 00018 88.05
BRA-N 4 - 0/40 -A4 550 00023 101.70 BRA-A 4 - 0/40 -A4 550 00023 101.70
3
BRA-N 4 - 60/100 -A4 600 00024 108.65 BRA-A 4 - 60/100 -A4 600 00024 108.65
BRA-N 4 - 120/140 -A4 650 00025 115.50 BRA-A 4 - 120/140 -A4 650 00025 115.50
BRA-N 5 - 0/40 -A4 550 00031 125.35 BRA-A 5 - 0/40 -A4 550 00031 125.35
BRA-N 5 - 60/100 -A4 600 00032 133.70 BRA-A 5 - 60/100 -A4 600 00032 133.70

BRA-N 5 - 120/140 -A4 650 00033 141.95 BRA-A 5 - 120/140 -A4 650 00033 141.95
BRA-N 6 - 0/40 -A4 600 00038 152.75 BRA-A 6 - 0/40 -A4 600 00038 152.75
BRA-N 6
BRA-N 6

- 60/100 -A4
- 120/140 -A4
650
700
00039
00040
162.65
172.55
BRA-A 6 - 60/100 -A4 650 00039 162.65 4
BRA-A 6 - 120/140 -A4 700 00040 172.55
BRA-N 7 - 0/40 -A4 650 00046 196.95 BRA-A 7 - 0/40 -A4 650 00046 196.95
BRA-N 7 - 60/100 -A4 700 00047 209.85 BRA-A 7 - 60/100 -A4 700 00047 209.85
BRA-N 7 - 120/140 -A4 750 00048 222.80 BRA-A 7 - 120/140 -A4 750 00048 222.80
BRA-N 8 - 0/40 -A4 700 00056 246.25 BRA-A 8 - 0/40 -A4 700 00056 246.25
BRA-N 8 - 60/100 -A4 750 00057 261.80 BRA-A 8 - 60/100 -A4 750 00057 261.80
DETAN
BRA-N 8 - 120/140 -A4 800 00058 277.35 BRA-A 8 - 120/140 -A4 800 00058 277.35
*) A
t the time of order, please specify the basic measurement b in 10 mm *) A
t the time of order, please specify the basic measurement b in in 10 mm
5
increments, e.g. 40 mm increments, e.g. 40 mm Framing systems
6
Bolts, accessories
75
h a l f e n pa r a p e t co r b e l
B RA - N J B RA - A J
HALFEN parapet corbel, height adjustable, HALFEN parapet corbel, hight adjustable, attic version,
type tested, material: SS 316 type tested, material: SS 316
l b
1 -NJ
Normal
-A
l Attic
b
Item Basic measurement b*) Profile length Article no. Price Item Basic measurement b*) Profile length Article no. Price
name. from/to [mm] l [mm] 0242.140- [EUR/item] name. from/to [mm] l [mm] 0242.130- [EUR/item]
BRA-NJ 1 - 0/40 -A4 400 0000 # 58.55 BRA-AJ 1 - 0/40 -A4 400 0000 # 58.55
BRA-NJ 1 - 60/100 -A4 450 0000 # 61.85 BRA-AJ 1 - 60/100 -A4 450 0000 # 61.85
2 BRA-NJ 1 - 120/140 -A4 500 0000 # 65.20 BRA-AJ 1 - 120/140 -A4 500 0000 # 65.20
BRA-NJ 2 - 0/40 -A4 450 0000 # 66.10 BRA-AJ 2 - 0/40 -A4 450 0000 # 66.10
BRA-NJ 2 - 60/100 -A4 500 0001 # 69.80 BRA-AJ 2 - 60/100 -A4 500 0001 # 69.80
BRA-NJ 2 - 120/140 -A4 550 0001 # 73.60 BRA-AJ 2 - 120/140 -A4 550 0001 # 73.60
BRA-NJ 3 - 0/40 -A4 500 0001 # 91.30 BRA-AJ 3 - 0/40 -A4 500 0001 # 91.30
BRA-NJ 3 - 60/100 -A4 550 0001 # 96.80 BRA-AJ 3 - 60/100 -A4 550 0001 # 96.80
Lifting systems
BRA-NJ 3 - 120/140 -A4 600 0002 # 102.35 BRA-AJ 3 - 120/140 -A4 600 0002 # 102.35
3 BRA-NJ 4 - 0/40 -A4 550 0002 # 121.25 BRA-AJ 4 - 0/40 -A4 550 0002 # 121.25
BRA-NJ 4 - 60/100 -A4 600 0002 # 128.10 BRA-AJ 4 - 60/100 -A4 600 0002 # 128.10
BRA-NJ 4 - 120/140 -A4 650 0002 # 135.05 BRA-AJ 4 - 120/140 -A4 650 0002 # 135.05
BRA-NJ 5 - 0/40 -A4 550 0002/3 # 136.85 BRA-AJ 5 - 0/40 -A4 550 0002/3 # 136.85
BRA-NJ 5 - 60/100 -A4 600 0003 # 145.20 BRA-AJ 5 - 60/100 -A4 600 0003 # 145.20
BRA-NJ 5 - 120/140 -A4 650 0003 # 153.45 BRA-AJ 5 - 120/140 -A4 650 0003 # 153.45
BRA-NJ 6 - 0/40 -A4 600 0003 # 170.55 BRA-AJ 6 - 0/40 -A4 600 0003 # 170.55
4 BRA-NJ 6 - 60/100 -A4
BRA-NJ 6 - 120/140 -A4
650
700
0003/4 #
0004 #
180.45
190.35
BRA-AJ 6 - 60/100 -A4
BRA-AJ 6 - 120/140 -A4
650
700
0003/4 #
0004 #
180.45
190.35
BRA-NJ 7 - 0/40 -A4 650 0004 # 221.60 BRA-AJ 7 - 0/40 -A4 650 0004 # 221.60
BRA-NJ 7 - 60/100 -A4 700 0004 # 234.60 BRA-AJ 7 - 60/100 -A4 700 0004 # 234.60
BRA-NJ 7 - 120/140 -A4 750 0004 # 247.50 BRA-AJ 7 - 120/140 -A4 750 0004 # 247.50
BRA-NJ 8 - 0/40 -A4 700 0005 # 280.95 BRA-AJ 8 - 0/40 -A4 700 0005 # 280.95
BRA-NJ 8 - 60/100 -A4 750 0005 # 296.55 BRA-AJ 8 - 60/100 -A4 750 0005 # 296.55
DETAN
BRA-NJ 8 - 120/140 -A4 800 0005 # 312.15 BRA-AJ 8 - 120/140 -A4 800 0005 # 312.15
5 # = configuration item, note: # = configuration item, note:
*) At the time of order, please specify the basic measurement b in 10 mm *) At the time of order, please specify the basic measurement b in 10 mm
increments, e.g. 40 mm increments, e.g. 40 mm
Framing systems
6
Bolts, accessories
76
h a l f e n pa r a p e t co r b e l , h a l f e n a n g l e d a n c h o r p l at e
B RA - M 1 W PA - A / B

Assembly components HALFEN angled anchor plate Installation diagram WPA,
for HALFEN parapet corbel Material: stainless steel SS 316 Vertical cross-section
WPA-B WPA-A
Complete set: flexible
b
1
Locking plate sleeve
2 shims for
level adjustment
t = 3 mm and t = 6 mm
Item suitable for Article no. Price Item Measurement b Load group V Article no. Price
name BRA profile 0250.150- [EUR/item] name from/to [mm] [kN] 0241.010- [EUR/item] 2
GV = electro plated SS 316 = stainless steel
BRA - M1 - 1 GV 1 00006 3.15 WPA - A - 5.0 - 20/ 70 5.0 00001 56.10
BRA - M1 - 2/3 GV 2/3 00007 3.20 WPA - A - 8.0 - 20/ 70 8.0 00002 64.55
BRA - M1 - 4 GV 4 00008 3.75 WPA - A - 11.5 - 30/ 80 11.5 00003 80.75
BRA - M1 - 5 GV 5 00009 4.80 WPA - A - 16.0 - 30/ 80 16.0 00004 98.90
BRA - M1 - 6/7/8 GV 6/7/8 00010 5.10 WPA - A - 22.0 - 30/ 80 22.0 00005 134.55
SS 316 = stainless steel WPA - A - 34.0 - 30/ 80 34.0 00006 164.30
Lifting systems
BRA - M1 - 1 A4 1 00001 10.30 0241.020-
BRA - M1 - 2/3 A4
BRA - M1 - 4 A4
2/3
4
00002
00003
10.60
12.35
WPA - B - 5.0 - 20/ 70
WPA - B - 8.0 - 20/ 70
5.0
8.0
00001
00002
58.85
67.30 3
BRA - M1 - 5 A4 5 00004 17.35 WPA - B - 11.5 - 30/ 80 11.5 00003 84.00
BRA - M1 - 6/7/8 A4 6/7/8 00005 18.50 WPA - B - 16.0 - 30/ 80 16.0 00004 102.35
WPA - B - 22.0 - 30/ 80 22.0 00005 138.10
B RA - M 2 WPA - B - 34.0 - 30/ 80 34.0 00006 168.30

Height adjustment
for HALFEN parapet corbel B RA a s s e m b l y a c c e s s o r i e s
BRA-NJ/-AJ
Complete set:
BRA assembly accessories M1 depending on profile
4
recommended HALFEN bolt
hexagonal head bolt, Assembly set 1
ordered separately [mm]
locking plate,
two shims for level BRA-M1-1 HS 40/22 M12 x 80
adjustment, t=6 mm BRA-M1-2 HS 50/30 M16 x 80
BRA-M1-3 HS 50/30 M16 x 80
suitable for Article no. Price BRA-M1-4 HS 50/30 M16 x 80
Item name
BRA profile 0250.160- [EUR/item] BRA-M1-5 HS 50/30 M20 x 75
GV = electro plated BRA-M1-6 HS 50/30 M20 x 75
DETAN
BRA - M2 - 1 GV 1 00007 3.00
BRA - M2 - 2 GV 2 00008 3.00
BRA-M1-7
BRA-M1-8
HS 50/30 M20 x 75
HS 50/30 M20 x 75 5
BRA - M2 - 3 GV 3 00009 3.05
Material: stainless steel SS 316 or electro plated
BRA - M2 - 4 GV 4 00010 4.10
BRA - M2 - 5/6 GV 5/6 00011 8.25
BRA - M2 - 7/8 - GV 7/8 00012 9.60 BRA assembly accessories M2 depending on profile
Dimensions of hexagonal head bolts
BRA - M2 - 1 A4 1 00001 9.90 and foot plate [mm]
Assembly set 2
BRA - M2 - 2 A4 2 00002 9.90
Framing systems
HSK Foot plate

BRA - M2 - 3 A4 3 00003 17.00
BRA - M2 - 4 A4
BRA - M2 - 5/6 A4
4
5/6
00004
00005
24.75
52.75
BRA-M2-1
BRA-M2-2
M16 x 60
M16 x 60
40 x 40 x 6
40 x 40 x 6
6
BRA - M2 - 7/8 - A4 7/8 00006 68.45
BRA-M2-3 M20 x 60 40 x 40 x 7
BRA-M2-4 M24 x 80 40 x 40 x 7
BRA-M2-5 M27 x 80 60 x 60 x 10
BRA-M2-6 M27 x 80 60 x 60 x 10
Bolts, accessories
BRA-M2-7 M30 x 80 70 x 70 x 12
BRA-M2-8 M30 x 80 70 x 70 x 12
Material: stainless steel SS 316 or electro plated
7
77
s pac e r b o lt s
DS 1 DS 3
HALFEN spacer bolt HALFEN tensile/compressive socket Sketch of installation:

l DS 1
Material: stainless steel SS 316 for setting in concrete in precast panels
Material: stainless steel SS 316 DS 1
1 suitable for: DS 3 DS 3
DS 13 DS 16
Ø x l [mm] [EUR/item]
b = [mm] b = [mm] 0243.010-
DS 1 - M 10 × 70 -A4 40 - 00002 5.70 LH
DS 1 - M 10 × 90 -A4 60 40 00003 5.70 Item name Sleeve length Article no. Price
DS 1 - M 10 × 110 -A4 80 60 00004 5.70 LH [mm] 0243.030- [EUR/item]
DS 1 - M 10 × 130 -A4 100 80 00005 5.70 DS 3 - M 10 -A4 58 00001 8.70

DS 1 - M 10 × 150 -A4 120 100 00006 5.70 DS 3 - M 12 -A4 59 00002 8.95
DS 1 - M 10 × 170 -A4 140 120 00007 6.25 DS 3 - M 16 -A4 64 00003 9.85
2 DS 1 - M 10 × 190 -A4 160 140 00008 6.25 DS 3 - M 20 -A4 72 00004 16.05
DS 1 - M 10 × 210 -A4 180 160 00009 6.25 DS 3 - M 24 -A4 75 00005 18.85
DS 1 - M 10 × 230 -A4 200 180 00010 6.90
DS 1 - M 10 × 250 -A4 - 200 00011 7.70 DS 6
Pressure plate
DS 1 - M 12 × 72 -A4 40 - 00012 6.75 Material: Stainless steel
DS 1 - M 12 × 92 -A4 60 40 00013 6.75 SS 316
DS 1 - M 12 × 112 -A4 80 60 00014 6.75
Lifting systems
DS 1 - M 12 × 132 -A4 100 80 00015 6.75
3 DS 1 - M 12 × 152 -A4
DS 1 - M 12 × 172 -A4
120
140
100
120
00016
00017
6.75
7.10 Item name Article no. Price
DS 1 - M 12 × 192 -A4 160 140 00018 7.10 0243.060- [EUR/item]
DS 1 - M 12 × 212 -A4 180 160 00019 7.10 DS 6 - M 10 - A4 00001 2.70
DS 1 - M 12 × 232 -A4 200 180 00020 8.15 DS 6 - M 12 - A4 00002 2.80
DS 1 - M 12 × 252 -A4 - 200 00021 9.90 DS 6 - M 16 - A4 00003 2.80
DS 6 - M 20 - A4 00004 6.25
DS 1 - M 16 × 75 -A4 40 - 00022 10.55

DS 1 - M 16 × 95 -A4 60 40 00023 10.55 DS 7
DS 1 - M 16 × 115 -A4 80 60 00024 10.55 Plastic socket Sketch of installation:
4 DS 1 - M 16 × 135 -A4
DS 1 - M 16 × 155 -A4
100
120
80
100
00025
00026
10.55
10.55
for setting in concrete or
inserting at a later date DS 7 DS 16
DS 1 - M 16 × 175 -A4 140 120 00027 11.10 in precast panels

DS 1 - M 16 × 195 -A4 160 140 00028 11.10
DS 1 - M 16 × 215 -A4 180 160 00029 11.10
DS 1 - M 16 × 235 -A4 200 180 00030 12.00
DS 1 - M 16 × 255 -A4 220 200 00031 14.80 LH
DS 1 - M 16 × 275 -A4 240 220 00032 15.45
DS 1 - M 16 × 295 -A4 - 240 00033 15.45
Item name Sleeve length Article no. Price
DETAN
5 DS 1 - M 20 × 80 -A4 40 - 00035 18.60

DS 7 - 10
LH [mm]
70
0243.070- [EUR/item]
00001 0.65
DS 1 - M 20 × 100 -A4 60 40 00036 18.60
DS 7 - 12 70 00002 0.75
DS 1 - M 20 × 120 -A4 80 60 00037 18.60
DS 7 - 16 80 00003 0.80
DS 1 - M 20 × 140 -A4 100 80 00038 18.60
DS 7 - 20 80 00004 0.80
DS 1 - M 20 × 160 -A4 120 100 00039 18.60
DS 1 - M 20 × 180 -A4 140 120 00040 20.45
DS 1 - M 20 × 200 -A4 160 140 00041 20.45
DS 1 - M 20 × 220 -A4 180 160 00042 20.45
Framing systems
DS 1 - M 20 × 240 -A4 200 180 00043 21.30
6 DS 1 - M 20 × 260 -A4
DS 1 - M 20 × 280 -A4
220
240
200
220
00044
00045
27.75
28.85
DS 1 - M 20 × 300 -A4 - 240 00046 30.20
DS 1 - M 24 × 105 -A4 60 - 00047 34.35

DS 1 - M 24 × 125 -A4 80 60 00048 34.35
DS 1 - M 24 × 145 -A4 100 80 00049 34.35
DS 1 - M 24 × 165 -A4 120 100 00050 34.35
Bolts, accessories
DS 1 - M 24 × 185 -A4 140 120 00051 36.70

DS 1 - M 24 × 205 -A4 160 140 00052 36.70
7 DS 1 - M 24 × 225 -A4 180 160 00053 36.70
DS 1 - M 24 × 245 -A4 200 180 00054 38.15
DS 1 - M 24 × 265 -A4 220 200 00055 39.75
DS 1 - M 24 × 285 -A4 240 220 00056 41.25
DS 1 - M 24 × 305 -A4 - 240 00057 43.35
78
S pac e r b o lt s
D S 13 D S 18

HALFEN spacer bolt with tensile/ Sketch of installation: HALFEN spacer bolt and threaded plate Sketch of installation:
compressive socket, consisting of DS 1 and DS 3 b consisting of DS 1 and DS 8
Material: stainless steel SS 316 Material: stainless steel SS 316
DS 1
1
DS 3 DS 3
DS 8
Item name Distance of wall b Article no. Price Item name Distance of wall b Article no. Price
Thread from/to Thread from/to
M [mm] 0243.130- [EUR/item] M [mm] 0243.180- [EUR/item]
DS 13 - 10 - 40 - A4 00001 14.35 DS 18 - 10 - 40 - A4 00001 8.40
DS 13 - 10 - 60 - A4 00002 14.35 DS 18 - 10 - 60 - A4 00002 8.40 2
DS 13 - 10 - 80 - A4 00003 14.35 DS 18 - 10 - 80 - A4 00003 8.40
DS 13 - 10 - 100 - A4 00004 14.35 DS 18 - 10 - 100 - A4 00004 8.40
DS 13 - 10 - 120 - A4 00005 14.35 DS 18 - 10 - 120 - A4 00005 8.95
DS 13 - 10 - 140 - A4 00006 14.95 DS 18 - 10 - 140 - A4 00006 8.95
DS 13 - 10 - 160 - A4 00007 14.95 DS 18 - 10 - 160 - A4 00007 8.95
DS 13 - 10 - 180 - A4 00008 14.95 DS 18 - 10 - 180 - A4 00008 9.60
DS 13 - 10 - 200 - A4 00009 15.55 DS 18- 10 - 200 - A4 00009 10.45
Lifting systems
DS 13 - 12 - 40 - A4
DS 13 - 12 - 60 - A4
00010
00011
15.70
15.70
DS 18 - 12 - 40 - A4
DS 18 - 12 - 60 - A4
00010
00011
9.60
9.60 3
DS 13 - 12 - 80 - A4 00012 15.70 DS 18 - 12 - 80 - A4 00012 9.60
DS 13 - 12 - 100 - A4 00013 15.70 DS 18 - 12 - 100 - A4 00013 9.60
DS 13 - 12 - 120 - A4 00014 15.70 DS 18 - 12 - 120 - A4 00014 10.05
DS 13 - 12 - 140 - A4 00015 16.05 DS 18 - 12 - 140 - A4 00015 10.05
DS 13 - 12 - 160 - A4 00016 16.05 DS 18 - 12 - 160 - A4 00016 10.05

DS 13 - 12 - 180 - A4 00017 16.05 DS 18 - 12 - 180 - A4 00017 11.10
DS 13 - 12 - 200 - A4 00018 17.15 DS 18 - 12 - 200 - A4 00018 12.75
DS 13 - 16 -
DS 13 - 16 -
40 - A4
60 - A4
00019
00020
20.45
20.45
DS 18 - 16 - 40 - A4
DS 18 - 16 - 60 - A4
00019
00020
13.40
13.40
4
DS 13 - 16 - 80 - A4 00021 20.45 DS 18 - 16 - 80 - A4 00021 13.40
DS 13 - 16 - 100 - A4 00022 20.45 DS 18 - 16 - 100 - A4 00022 13.40
DS 13 - 16 - 120 - A4 00023 20.45 DS 18 - 16 - 120 - A4 00023 13.90
DS 13 - 16 - 140 - A4 00024 20.95 DS 18 - 16 - 140 - A4 00024 13.90
DS 13 - 16 - 160 - A4 00025 20.95 DS 18 - 16 - 160 - A4 00025 13.90
DS 13 - 16 - 180 - A4 00026 20.95 DS 18 - 16 - 180 - A4 00026 14.95
DS 13 - 16 - 200 - A4 00027 22.00 DS 18 - 16 - 200 - A4 00027 17.60
DETAN
DS 13 - 16 - 220 - A4 00028 22.55 DS 18 - 16 - 220 - A4 00028 18.20
DS 13 - 16 - 240 - A4 00029 23.15 DS 18 - 16 - 240 - A4 00029 18.20 5
DS 18 - 16 - 260 - A4 00030 upon request
DS 13 - 20 - 40 - A4 00030 34.70
DS 13 - 20 - 60 - A4 00031 34.70 DS 18 - 20 - 40 - A4 00031 24.85
DS 13 - 20 - 80 - A4 00032 34.70 DS 18 - 20 - 60 - A4 00032 24.85
DS 13 - 20 - 100 - A4 00033 34.70 DS 18- 20 - 80 - A4 00033 24.85
DS 13 - 20 - 120 - A4 00034 34.70 DS 18 - 20 - 100 - A4 00034 24.85
DS 13 - 20 - 140 - A4 00035 36.50 DS 18 - 20 - 120 - A4 00035 26.70
Framing systems
DS 13 - 20 - 160 - A4 00036 36.50 DS 18 - 20 - 140 - A4 00036 26.70

DS 13 - 20 - 180 - A4
DS 13 - 20 - 200 - A4
00037
00038
36.50
37.35
DS 18 - 20 - 160 - A4
DS 18 - 20 - 180 - A4
00037
00038
26.70
27.55
6
DS 13 - 20 - 220 - A4 00039 42.05 DS 18 - 20 - 200 - A4 00039 34.50
DS 13 - 20 - 240 - A4 00040 43.30 DS 18 - 20 - 220 - A4 00040 35.60
DS 18 - 20 - 240 - A4 00041 36.95
DS 13 - 24 - 60 - A4 00041 53.10 DS 18 - 24 - 260 - A4 00042 upon request
DS 13 - 24 - 80 - A4 00042 53.10
DS 13 - 24 - 100 - A4 00043 53.10
Bolts, accessories
DS 13 - 24 - 120 - A4 00044 53.10

DS 13 - 24 - 140 - A4 00045 55.60
DS 13 - 24 - 160 - A4 00046 55.60 7
DS 13 - 24 - 180 - A4 00047 55.60
DS 13 - 24 - 200 - A4 00048 57.00
DS 13 - 24 - 220 - A4 00049 57.70
DS 13 - 24 - 240 - A4 00050 59.30
79
S pac e r b o lt s , a dj u s ta b l e r e s t r a i n t
DS 2 DS 5
HALFEN spacer bolt with slot HALFEN tensile/compressive socket Sketch of installation:
Material: stainless steel SS 316 for setting in concrete in precast panels
l Material: stainless steel SS 316 DS 2
1 DS 2
with slot DS 5
suitable for: ±20

DS 25 f
[EUR/item]
Ø x L [mm] b = [mm] 0243.020-
DS 2 - M 10 x 70 -A4 40 00001 8.10 Item name
Article no.
Price
DS 2 - M 10 x 90 -A4 60 00002 8.10 Sleeve length
[EUR/item]
DS 2 - M 10 x 110 -A4 80 00003 8.10 f [mm] 0243.050-
DS 2 - M 10 x 130 -A4 100 00004 8.10 DS 5 - M 10 - A4 - f = #
2 DS 2 - M 10 x 150 -A4 120 00005 8.10 DS 5 - M 12 - A4 - f = #
upon request
DS 2 - M 10 x 170 -A4 140 00006 8.70 DS 5 - M 16 - A4 - f = #
DS 2 - M 10 x 190 -A4 160 00007 8.70 DS 5 - M 20 - A4 - f = #
DS 2 - M 10 x 210 -A4 180 00008 8.70 Note:
DS 2 - M 10 x 230 -A4 200 00009 9.30 Production is to order – specified with measurement f [mm] =
Thickness of precast panel = Sleeve length = max. 140 mm
DS 2 - M 12 x 72 -A4 40 00011 9.00 Ordering example: DS 5 - M 12 - A4 - f = 120
DS 2 - M 12 x 92 -A4 60 00012 9.00 Type
Lifting systems
DS 2 - M 12 x 112 -A4 80 00013 9.00 Thread
3 DS 2 - M 12
DS 2 - M 12
x
x
132
152
-A4
-A4
100
120
00014
00015
9.00
9.00
Measurement f [mm]
# = Configuration/special items, please give item name at

DS 2 - M 12 x 172 -A4 140 00016 9.55
the time of order.
DS 2 - M 12 x 192 -A4 160 00017 9.55
DS 2 - M 12 x 212 -A4 180 00018 9.55
DS 2 - M 12 x 232 -A4 200 00019 10.55 LD
Adjustable restraint
DS 2 - M 16 x 75 -A4 40 00021 12.90 Material: stainless steel SS 316
DS 2 - M 16 x 95 -A4 60 00022 12.90 Sketch of installation:
DS 2 - M 16 x 115 -A4 80 00023 12.90 HALFEN bolt,
4 DS 2 - M 16 x 135
DS 2 - M 16 x 155
-A4
-A4
100
120
00024
00025
12.90
12.90
HALFEN cast-in
channel,
DS 2 - M 16 x 175 -A4 140 00026 13.40 Thrust/tension
screw DS 13
DS 2 - M 16 x 195 -A4 160 00027 13.40
(ordered sepa-
DS 2 - M 16 x 215 -A4 180 00028 13.40
rately)
DS 2 - M 16 x 235 -A4 200 00029 14.35
DS 2 - M 16 x 255 -A4 220 00030 18.20 When using
DS 2 - M 16 x 275 -A4 240 00031 18.85 DS 13-M 10,
consists of:
M 10 shim,
- restraint tie
DETAN
DS 2 - M 20 x 80 -A4 40 00033 21.75 DIN 9021 ordered

5 DS 2 - M 20 x 100 -A4 60 00034 21.75
- connection bolt
separately
DS 2 - M 20 x 120 -A4 80 00035 21.75
DS 2 - M 20 x 140 -A4 100 00036 21.75 Item name Suitable
Article no. Price
DS 2 - M 20 x 160 -A4 120 00037 21.75 Load group (tension) HALFEN bolt type
[EUR/item]
DS 2 - M 20 x 180 -A4 140 00038 23.50 [kN] (ordered separately) 0244.000-
DS 2 - M 20 x 200 -A4 160 00039 23.50 LD - 2.0 - A4 HS28/15-A4-70-M10x40 00001 19.90
DS 2 - M 20 x 220 -A4 180 00040 23.50 LD - 3.5 - A4 HS38/17-A4-50-M12x50 00002 28.85
DS 2 - M 20 x 240 -A4 200 00041 24.35 LD - 6.0 - A4 HS50/30-A4-50-M16x50 00003 53.65
Framing systems
DS 2 - M 20 x 260 -A4 220 00042 31.90
6 DS 2 - M 20 x 280 -A4 240 00043 33.15 Accessories: shim

(ordered separately, also see note provided above)
Article no. Price
0370.040- [EUR/100 items]
DS 2 - M 24 x 105 -A4 60 00045 38.35 US M10 A4 DIN 9021 00002 45.60
DS 2 - M 24 x 125 -A4 80 00046 38.35
DS 2 - M 24 x 145 -A4 100 00047 38.35
DS 2 - M 24 x 165 -A4 120 00048 38.35
DS 2 - M 24 x 185 -A4 140 00049 40.65
DS 2 - M 24 x 205 -A4 160 00050 40.65
Bolts, accessories
DS 2 - M 24 x 225 -A4 180 00051 40.65

DS 2 - M 24 x 245 -A4 200 00052 42.05
7 DS 2 - M 24 x 265 -A4 220 00053 42.85
DS 2 - M 24 x 285 -A4 240 00054 44.35
80
a dj u s ta b l e r e s t r a i n t, r e s t r a i n t t i e s
LD- A HKZ 28/15 HALFEN restraint tie with toothed washer

adjustable restraint Sketch of installation: t - Continuation of left column -
Item name suitable for b Article no. Price
Measurement a1 [mm] [mm] 0245.010- [EUR/item]
GV = electro plated
HKZ 28/15 - 50 - GV 0 00008 5.85
1
x l HKZ 28/15 - 75 - GV 25 00009 5.95
HKZ 28/15 - 100 - GV 50 00010 6.00
consists of: HKZ 28/15 - 125 - GV 75 00011 6.05
Clamping fork, a
HKZ 28/15 - 150 - GV 100 00012 6.35
HALFEN cast-in HALFEN bolts, cast in channels, HKZ 28/15 - 175 - GV 125 00013 6.40
channel, washer spacer bolts with tensile/compressive
HKZ 28/15 - 200 - GV 150 00014 6.45
Material: stainless steel SS 316 socket DS13 to be ordered seperately
HKZ 28/15 - 225 - GV 175 00018 upon
HKZ 28/15 - 250 - GV 200 00019 request
Item name
Load group
Bearing
bolt
a t l Article no. Price
0245.020- 2
HKZ 38/17 - 75 - GV 0 00009 6.80
(tension) [kN] [mm] [mm] [mm] 0261.150- [EUR/item]
HKZ 38/17 - 100 - GV 25 00010 6.90
LD-A - 1.8 M12 21 22 130 00001 16.15
HKZ 38/17 - 125 - GV 50 00011 7.00
LD-A - 1.8 M16 25 22 130 00002 16.40
HKZ 38/17 - 150 - GV 75 00012 7.10
LD-A - 3.5 M12 21 30 135 00003 20.80
HKZ 38/17 - 175 - GV 100 00013 7.25
LD-A - 3.5 M16 25 30 135 00004 21.05
HKZ 38/17 - 200 - GV 125 00014 7.30
LD-A - 3.5 M20 29 30 135 00005 21.55
HKZ 38/17 - 225 - GV 150 00019
Lifting systems
LD-A - 6.0 M16 27 35 135 00006 33.50
HKZ 38/17 - 250 - GV 175 00020 upon
LD-A - 6.0 M20 31 35 135 00007 34.65
Ordering example: LD-A-3.5-12
HKZ 38/17 - 275 - GV
HKZ 38/17 - 300 - GV
200
225
00021
00022
request
3
HKZ HKZ-GF
HALFEN restraint tie Sketch of installation:
HALFEN restraint tie Sketch of
with toothed washer
with toothed washer installation:

b
b 4
a1
a1
Item name suitable for b Article no. Price Item name suitable for b Article no. Price
Measurement a1 [mm] [mm] 0245.010- [EUR/item] Measurement a1 [mm] [mm] 0245.050- [EUR/item]
SS 316 = stainless steel SS 316 = stainless steel
HKZ 28/15 - 50 - A4 0 00001 10.35 HKZ - GF 28/15 - 75 - A4 25 00001 20.10
HKZ 28/15 - 75 - A4 25 00002 10.65 HKZ - GF 28/15 - 100 - A4 50 00002 20.45
DETAN
HKZ 28/15 - 100 - A4 50 00003 10.95 HKZ - GF 28/15 - 125 - A4 75 00003 20.90
HKZ 28/15 - 125 - A4 75 00004 11.35 HKZ - GF 28/15 - 150 - A4 100 00004 21.50 5
HKZ 28/15 - 150 - A4 100 00005 11.65 HKZ - GF 28/15 - 175 - A4 125 00005 21.80
HKZ 28/15 - 175 - A4 125 00006 12.00 0245.060-
HKZ 28/15 - 200 - A4 150 00007 12.30 HKZ - GF 38/17 - 100 - A4 25 00002 26.95
HKZ 28/15 - 225 - A4 175 00015 12.70 HKZ - GF 38/17 - 125 - A4 50 00003 27.05
HKZ 28/15 - 250 - A4 200 00016 13.40 HKZ - GF 38/17 - 150 - A4 75 00004 28.05
0245.020- HKZ - GF 38/17 - 175 - A4 100 00005 28.30
Framing systems
HKZ 38/17 - 75 - A4 0 00002 12.60

HKZ 38/17 - 100 - A4 25 00003 13.05 GV = electro plated
HKZ 38/17 - 125 - A4
HKZ 38/17 - 150 - A4
50
75
00004
00005
13.70
14.10 HKZ - GF 28/15 - 75 - GV 25
0245.050-
00006 10.20
6
HKZ 38/17 - 175 - A4 100 00006 14.65 HKZ - GF 28/15 - 100 - GV 50 00007 10.35
HKZ 38/17 - 200 - A4 125 00007 15.05 HKZ - GF 28/15 - 125 - GV 75 00008 10.40
HKZ 38/17 - 225 - A4 150 00015 16.95 HKZ - GF 28/15 - 150 - GV 100 00009 10.50
HKZ 38/17 - 250 - A4 175 00016 18.60 HKZ - GF 28/15 - 175 - GV 125 00010 10.55
HKZ 38/17 - 275 - A4 200 00017 20.70 0245.060-
HKZ 38/17 - 300 - A4 225 00018 22.15 HKZ - GF 38/17 - 100 - GV 25 00007 11.95
Bolts, accessories
- continued on right column - HKZ - GF 38/17 - 125 - GV 50 00008 12.05

HKZ - GF 38/17 - 150 - GV 75 00009 12.15
HKZ - GF 38/17 - 175 - GV 100 00010 12.40 7
HALFEN bolts and HALFEN cast-in channels ordered separately
81
r e s t r a i n t t i e s , r e s t r a i n t w i t h t u r n b u c k l e , p r e c a s t co n n e c t i o n
HKZ-GU SP V
HALFEN restraint tie Sketch of installation: HALFEN restraint with turnbuckle Sketch of installation:
with toothed washer Material: stainless steel SS 316
b Scope of supply:
a1 - turnbuckle
- 2 HALFEN bolts
Item name suitable for b Article no. Price

(right- and left-hand thread),
Measurement a1 [mm] [mm] 0245.090- [EUR/item]
3 flat nuts, 2 washers
A4 = stainless steel W 1.4571/1.4401 (A4) and 2 locking washers
2 HKZ - GU 38/17 - 200 - A4 125 00001 32.20
Note: HALFEN cast-in channels ordered separately
b
HKZ - GU 38/17 - 225 - A4 150 00002 33.25

HKZ - GU 38/17 - 250 - A4 175 00003 34.25 Item name
Article no. Price
0245.100- Load group
[EUR/item]
HKZ - GU 50/30 - 200 - A4 50 00001 45.30 [kN] b [mm] 0248.000-
HKZ - GU 50/30 - 225 - A4 75 00002 46.00 SPV - 5.0 - 100 - A4 00001 34.05
HKZ - GU 50/30 - 250 - A4 100 00003 46.85 SPV - 5.0 - 120 - A4 00002 34.35
HKZ - GU 50/30 - 275 - A4 125 00004 47.85 SPV - 5.0 - 140 - A4 00003 35.35
Lifting systems
HKZ - GU 50/30 - 300 - A4 150 00005 49.05 SPV - 5.0 - 160 - A4 00004 35.70
3 GV = electro plated
SPV -
SPV -
5.0 - 180 - A4
5.0 - 200 - A4
00005
00006
36.20
36.45
0245.090-
HKZ - GU 38/17 - 200 - GV 125 00004 14.30 SPV - 7.0 - 100 - A4 00007 47.40
HKZ - GU 38/17 - 225 - GV 150 00005 14.40 SPV - 7.0 - 120 - A4 00008 48.15
HKZ - GU 38/17 - 250 - GV 175 00006 14.45 SPV - 7.0 - 140 - A4 00009 48.25
0245.100- SPV - 7.0 - 160 - A4 00010 50.15
HKZ - GU 50/30 - 200 - GV 50 00006 18.40 SPV - 7.0 - 180 - A4 00011 51.25
HKZ - GU 50/30 - 225 - GV 75 00007 18.70 SPV - 7.0 - 200 - A4 00012 52.30
HKZ - GU 50/30 - 250 - GV 100 00008 19.00
4 HKZ - GU 50/30 - 275 - GV
HKZ - GU 50/30 - 300 - GV
125
150
00009
00010
19.15
19.35
SPV - 10.0 - 140 - A4
SPV - 10.0 - 160 - A4
00013
00014
75.70
76.85
HALFEN bolts and HALFEN cast-in channels ordered separately SPV - 10.0 - 180 - A4 00015 77.85
SPV - 10.0 - 200 - A4 00016 78.95
UL Z
Universal tie Sketch of installation: HVL
with toothed washer
HALFEN precast connection (→ HVL technical information)
HVL-M pre-assembled unit
consists of:
DETAN
5 l - hammer head strap with welded

toothed plate welded on
- 1 toothed washer
- 2 bolt sets
(HALFEN bolt
HS 38/17-M 12 x 50
Item name Connecting Article no. Price + washer
Measurement l [mm] bolt 0261.059 [EUR/item] + tapered compression spring)
Version: A4 = stainless steel W 1.4571/1.4401 (A4)
Framing systems
HVL-E
ULZ 30-5 - - A4 M10
consists of:
6 ULZ 40-6 -
ULZ 60-6 -
- A4
- A4
M12
M16
upon request
HALFEN channel Sketch of installation:
HVL-M
HTA 38/17-300
Order HALFEN bolts and HALFEN cast-in channels separately with 2 bolt anchors and HVL-E
Specify length ‘l’ required at the time of order one loop end anchor
HTA 38/17
(→ page 10)
Precast unit
Bolts, accessories
Price
[EUR/item]
7 FV = hot-dip galvanised
0040.010-
HVL - M - FV assembly component 00001 29.95
0040.020-
HVL - E - FV installation component 00001 9.35
82
WinD anchor, DoWel res traints
WDK hfV-1

Plastic wind anchor with sandwich panel anchor M 10, stainless steel ss 316 Oval socket,
Material: Ks = plastic
Accessories: h
Plug, plastic l
1
b
b with without Item name Measurements Article no. Price

f
rim rim Load group l / b / h
Item name f b Article no. Price [kN] [mm] 0249.010- [EUR/item]
Load group from/to hfV-1-2.5-Ks 18/44/100 00001 1.00
[kN] [mm] [mm] 0247.010- [EUR/item] hfV-1-5.0-Ks 22/47/100 00002 1.05
Installation component
WDK - e 3.0 - 100 100 00001 4.15 hfV-2 2
WDK - e 3.0 - 120 120 00002 5.10 Slotted plate with reinforcement,
type tested, material: stainless styrofoam ®
Extension steel ss 316
WDK - e - 3.0 - Vrl 20 +20 00003 0.90
Complete set 0247.020-

WDK - M 100 20/60 00001
lifting systems
2.75 c b
dto. 120 20/40 dto.
Extension 3
WDK - M 3.0 - Vrl 40 +40 00004 0.90 Item name Mesurements Article no. Price
Load group b/c
WDK accessories 0250.060- [kN] [mm] 0249.020- [EUR/item]
WDK-str Plug with rim 00001 0.75 hfV-2-2.5-a4 17/50 00001 25.95
WDK-str Plug with rim 00002 0.70 hfV-2-5.0-a4 21/60 00002 26.10

WDi hfV-3, -4
Wind anchor Vertical cross-section Loose dowel Grouting socket
with injection anchor M12,
stainless steel ss 316
type tested type tested 4
styrofoam ® l
150
Material: Material:
Reinforced stainless stainless
f b concrete b
steel ss 316 steel ss 316
Item name Measurements Description Article no. Price
Detan
Load group f b
[kN] [mm] [mm] 0247. [EUR/item]
d 60
5
WDi - 7.0 - e Installation component 030- upon request Item name Measure- Article no. Price
Load group ments b/l D
WDi - 7.0 - M Assembly component 040- upon request [kN] [mm] [mm] 0249.030- [EUR/item]
hfV-3-2.5-a4 - 16 00001 8.40
0250.110- hfV-3-5.0-a4 - 20 00002 13.85
WDi - Z2 Bracket 00010 0249.040-
WDi - Z4 Setting tool 00011 hfV-4-2.5/5.0-a4 44/100 00001 28.30
framing systems
upon request
for approx. 30 drilled
WDi - mortar set 00006
Explanatory notes:
holes
- = supplied installation component
hfV-5
Sleeve
6
- = supplied assembly components
, = please specify measurements at the time of order.
Ordering examples: WDi-7.0-e f = 80 mm
WDi-7.0-M f = 80 mm, b = 120 mm 45
l
45
Bolts, accessories
Item name Measurements Article no. Price 7

Load group B / L
[kN] [mm] 0249.050- [EUR/item]
hfV-5-2.5-Ks 16.5/100 00001 0.90
hfV-5-5.0-Ks 20.5/100 00002 1.05
83
D o W e l r e s t r a i n t s , s a n D W i c h pa n e l a n c h o r
hfV-B s pa - 1
Spirals 60 x 80 mm HALFEN sandwich panel support anchor

for precast panel dowel
restraints
Material:
stainless cut
steel ss 316
0249.100- [EUR/item] Item name Weight PU Article no. Price

WB = no corrosion protection Ø H PU
hfV - B - WB 00001 0.65 [mm] [mm] kg [items] 0270.010- [EUR/item]
2 spa - 1 - 05 - 160 - a4 11.50 100 00001 4.70
ss 316 = stainless steel ss 316 spa - 1 - 05 - 180 - a4 11.50 100 00002 4.80
hfV-B-a4 00002 3.45
spa - 1 - 06 - 160 - a4 14.72 80 00003 6.25
hfV-7 spa - 1 - 06 - 180 - a4 13.93 75 00004 6.60
Dowel mandrel with reinforcement, spa - 1 - 06 - 200 - a4 13.91 65 00005 6.90
type tested spa - 1 - 06 - 220 - a4 11.45 50 00006 7.10
Material: stainless steel ss 316 spa - 1 - 06 - 240 - a4 10.98 45 00007 7.45
lifting systems
spa - 1 - 06 - 260 - a4 7.77 30 00008 7.65
3 spa - 1 - 08 - 220 - a4 13.92 40 00009 9.35

spa - 1 - 08 - 240 - a4 12.99 35 00010 9.80
D spa - 1 - 08 - 260 - a4 9.85 25 00011 10.25
spa - 1 - 08 - 280 - a4 24.96 60 00012 10.70
spa - 1 - 08 - 300 - a4 17.44 40 00013 11.10
Item name Article no. Price spa - 1 - 08 - 320 - a4 45.90 100 00014 11.50
Load group D
[kN] [mm] 0249.070- [EUR/item] spa - 1 - 10 - 340 - a4 38.50 50 00015 21.20
hfV-7 - 2.5 - a4 16 00001 21.45 spa - 1 - 10 - 360 - a4 80.50 100 00016 21.85
4 hfV-7 - 5.0 - a4 20 00002 25.00
s pa - 2
hfV-8 HALFEN sandwich panel support anchor
Sleeve with reinforcement,
type tested
Material: stainless steel ss 316
Material:
Detan
5 B
stainless
steel ss 316
cut
Item name Article no. Price Item name Weight PU Article no. Price
Load group B Ø H PU
[kN] [mm] 0249.080- [EUR/item] [mm] [mm] kg [items] 0271.010- [EUR/item]
hfV-8 - 2.5 - a4 17 00001 22.00 spa - 2 - 05 - 160 - a4 12.81 70 00001 7.55
hfV-8 - 5.0 - a4 21 00002 24.05 spa - 2 - 05 - 180 - a4 12.06 60 00002 7.95
framing systems
hfV-9 spa - 2 - 06 - 160 - a4 17.86 56 00003 10.45
6 Grouting sleeve
40 mm spa
spa
-
-
2
2
-
-
06
06
-
-
180 - a4
200 - a4
15.95
13.27
50
35
00004
00005
10.95
11.65
spa - 2 - 06 - 220 - a4 14.28 35 00006 12.15
spa - 2 - 06 - 240 - a4 13.14 30 00007 12.75
100 mm spa - 2 - 06 - 260 - a4 9.36 20 00008 13.40
spa - 2 - 08 - 220 - a4 61.90 100 00009 16.95

spa - 2 - 08 - 240 - a4 66.50 100 00010 17.65
Bolts, accessories
spa - 2 - 08 - 260 - a4 56.80 80 00011 18.55

spa - 2 - 08 - 280 - a4 52.85 70 00012 19.40
7 spa - 2 - 08 - 300 - a4 47.52 60 00013 20.25
Item name Article no. Price spa - 2 - 08 - 320 - a4 125.55 150 00014 21.15
0249.090- [EUR/item]
hfV-9 - 40 x 100 - Ks 00001 1.60 spa - 2 - 10 - 340 - a4 139.00 100 00015 37.35
hfV-9 - 32 x 120 - Ks 00002 1.60 spa - 2 - 10 - 360 - a4 145.90 100 00016 38.70
84
h a l f e n s a n dw i c h pa n e l a n c h o r
SPA - B SPA - A

Sandwich panel tie Sandwich panel clip-on pins
(plug-in tie), material: stainless steel SS 316 Material: stainless steel SS 316
1
cut
cut
Item name b Weight PU Article no. Price
Ø H PU
Item name b Weight PU Article no. Price [mm] [ mm] [mm] kg [items] 0272.010- [EUR/item]
Ø H PU SPA - A - 03 - 120 - A4 0-30 1000 00001 0.75
[mm] [mm] [mm] kg [items] 0273.010- [EUR/item] SPA - A - 03 - 140 - A4 30-40 1000 00002 0.85
SPA - B - 03 - 160 - A4 40-60 23.00 1000 00001 0.90 SPA - A - 03 - 160 - A4 40-60 1000 00003 0.85 2
SPA - B - 03 - 180 - A4 60-70 18.40 800 00002 0.90 SPA - A - 03 - 180 - A4 60-70 1000 00004 0.90
0273.020- 0272.030-
SPA - B - 04 - 160 - A4 40-60 25.20 600 00001 1.30 SPA - A - 04 - 160 - A4 40-60 250 00001 1.30
SPA - B - 04 - 180 - A4 50-80 23.50 500 00002 1.35 SPA - A - 04 - 200 - A4 50-100 250 00002 1.35
SPA - B - 04 - 200 - A4 70-100 25.00 500 00003 1.60 SPA - A - 04 - 250 - A4 90-150 250 00003 1.45
SPA - B - 04 - 220 - A4 90-120 27.00 500 00004 1.65 0272.050-
SPA - B - 04 - 240 - A4 110-120 23.20 400 00005 1.90 SPA - A - 05 - 200 - A4 50-100 250 00001 3.35
Lifting systems
0273.030- SPA - A - 05 - 250 - A4 90-150 250 00002 3.50
SPA - B - 05 - 240 - A4
SPA - B - 05 - 260 - A4
110-140
130-160
27.00
29.10
300
300
00001
00002
2.75
2.80
SPA - A - 05 - 280 - A4
SPA - A - 05 - 320 - A4
140-180
170-220
250
200
00003
00004
3.65
4.05 3
SPA - B - 05 - 280 - A4 150-180 25.75 250 00003 3.00
SPA - B - 05 - 300 - A4 170-200 27.25 250 00004 3.05
SPA - B - 05 - 320 - A4 190-220 28.75 250 00005 3.20
SPA - N

Sandwich panel connector pins
Material: stainless steel SS 316
cut
Item name b Weight PU Article no. Price

Ø H PU
DETAN
[mm] [mm] [mm] kg [items] 0274.010- [EUR/item]
SPA - N - 03 - 120 - A4 0-20 1000 00001 0.45 5
SPA - N - 03 - 140 - A4 10-30 1000 00002 0.45
SPA - N - 03 - 160 - A4 40-50 1000 00003 0.55
SPA - N - 03 - 180 - A4 60-70 1000 00004 0.55
SPA - N - 03 - 200 - A4 70-90 1000 00005 0.60
0274.020-
SPA - N - 04 - 160 - A4 40-50 500 00001 1.15
SPA - N - 04 - 180 - A4 60-70 500 00002 1.20
Framing systems
SPA - N - 04 - 200 - A4 80-90 500 00003 1.20

SPA - N - 04 - 220 - A4
SPA - N - 04 - 240 - A4
100-110
110-130
500
250
00004
00005
1.30
1.45
6
0274.030-
SPA - N - 05 - 240 - A4 120-130 250 00001 2.70
SPA - N - 05 - 260 - A4 140-150 250 00002 3.35
SPA - N - 05 - 280 - A4 160-170 250 00003 3.50
SPA - N - 05 - 300 - A4 180-190 250 00004 3.65
SPA - N - 05 - 320 - A4 200-210 200 00005 4.00
Bolts, accessories
0274.040-
SPA - N - 06 - 340 - A4 220-230 00001 4.90
SPA - N - 06 - 360 - A4 240-250 00002 4.95 7
SPA - N - 06 - 380 - A4 260-270 00003 4.95
SPA - N - 06 - 400 - A4 280-290 00004 5.00
SPA - N - 06 - 420 - A4 300 00005 5.25
85
d e h a s l e e v e s a n dw i c h pa n e l a n c h o r
5300 5301
DEHA sleeve sandwich panel anchor DEHA sandwich panel anchor system,
Material: stainless steel SS 316 flat anchor, material: stainless steel SS 316
Plate thickness 1.5 mm
1
Item name
Article no. Price
H L
[EUR/item]
[mm] [mm] 0771.010-
5301- 150- 40 00001 3.20
5301- 150- 80 00002 5.25

5301- 150- 120 00003 7.65
5301- 150- 160 00004 9.80
2 Item name Article no. Price
5301- 150- 200 00005 12.15
H Ø 5310- 150- 240 00006 14.35
0770.010- [EUR/item]
[mm] [mm] 5301- 150- 280 00007 16.95
5300- 150- 51 00001 13.70 5301- 150- 320 00008 19.15
5300- 150- 76 00002 17.70 5301- 150- 360 00009 21.45
5300- 150- 102 00003 21.15 5301- 150- 400 00010 23.90
5300- 150- 127 00004 27.20
5300- 150- 153 00005 30.90 5301- 175- 40 00011 4.00
Lifting systems
5300- 150- 178 00006 35.25 5301- 175- 80 00012 7.05

5301- 175- 120 00013 10.05
3 5300- 175- 51 00007 16.70 5301- 175- 160 00014 11.90
5300- 175- 76 00008 21.45 5301- 175- 200 00015 14.35
5300- 175- 102 00009 26.25 5301- 175- 240 00016 17.10
5300- 175- 127 00010 31.55 5301- 175- 280 00017 20.25
5300- 175- 153 00011 36.20 5301- 175- 320 00018 25.15
5300- 175- 178 00012 41.20 5301- 175- 360 00019 25.95
5300- 175- 204 00013 46.10 5301- 175- 400 00020 28.30
5300- 175- 229 00014 50.75
5300- 175- 255 00015 55.60 5301- 200- 40 00021 4.70
4 5300- 175- 280 00016 59.85 5301-

5301-
200-
200-
80
120
00022
00023
9.30
12.30
5300- 200- 51 00017 19.80 5301- 200- 160 00024 16.35
5300- 200- 76 00018 26.25 5301- 200- 200 00025 19.90
5300- 200- 102 00019 32.45 5301- 200- 240 00026 23.90
5300- 200- 127 00020 39.00 5301- 200- 280 00027 28.25
5300- 200- 153 00021 45.25 5301- 200- 320 00028 32.20
5300- 200- 178 00022 51.45 5301- 200- 360 00029 36.30
5300- 200- 204 00023 56.95 5301- 200- 400 00030 40.35
DETAN
5300- 200- 229 00024 63.15

5 5300- 200- 255 00025 69.45 5301- 225- 40 00031 5.00
5300- 200- 280 00026 74.75 5301- 225- 80 00032 10.25
5301- 225- 120 00033 13.30
5300- 225- 51 00027 20.45 5301- 225- 160 00034 17.40
5300- 225- 76 00028 26.95 5301- 225- 200 00035 21.45
5300- 225- 102 00029 33.20 5301- 225- 240 00036 25.80
5300- 225- 127 00030 39.95 5301- 225- 280 00037 30.60
5300- 225- 153 00031 46.10 5301- 225- 320 00038 34.90
Framing systems
5300- 225- 178 00032 70.95 5301- 225- 360 00039 39.25
6 5300-
5300-
225-
225-
204
229
00033
00034
79.10
88.00
5301- 225- 400 00040 43.40
5300- 225- 255 00035 96.95

5300- 225- 280 00036 104.40
5300- 260- 51 00037 23.80

5300- 260- 76 00038 31.35
5300- 260- 102 00039 38.45
Bolts, accessories
5300- 260- 127 00040 46.15

5300- 260- 153 00041 53.50
7 5300- 260- 178 00042 82.35
5300- 260- 204 00043 91.30
5300- 260- 229 00044 101.40
5300- 260- 255 00045 111.50
5300- 260- 280 00046 120.25
86
d e h a s l e e v e s a n dw i c h pa n e l a n c h o r
5302 5303

DEHA sandwich panel anchor system, DEHA sandwich panel anchor system,
flat anchor, material: stainless steel SS 316 flat anchor, material: stainless steel SS 316
Plate thickness 2.0 mm Plate thickness 3.0 mm
1
H L Item name Article no.
[mm] [mm] 0771.020- [EUR/item] Price
H L
0771.030- [EUR/item]
5302- 175- 40 00001 6.35 [mm] [mm]
5302- 175- 80 00002 9.00 5303- 260- 80 00001 26.90
5302- 175- 120 00003 11.90 5303- 260- 120 00002 36.95
5302- 175- 160 00004 16.05 5303- 260- 160 00003 44.25
5302- 175- 200 00005 18.85 5303- 260- 200 00004 57.85
5303- 260- 240 00005 68.50 2
5302- 175- 240 00006 21.75 5303- 260- 280 00006 74.05
5302- 175- 280 00007 25.15 5303- 260- 320 00007 78.20
5302- 175- 320 00008 28.15 5303- 260- 360 00008 82.75
5302- 175- 360 00009 31.15 5303- 260- 400 00009 87.75
5302- 175- 400 00010 34.15
5303- 280- 80 00010 28.70
5302- 200- 40 00011 6.90 5303- 280- 120 00011 39.55
Lifting systems
5302- 200- 80 00012 10.15 5303- 280- 160 00012 50.85
5302-
5302-
200-
200-
120
160
00013
00014
13.60
18.25
5303- 280- 200
5303- 280- 240
00013
00014
61.90
73.40 3
5302- 200- 200 00015 21.35 Note: Types 5440/5540/5940 = SPA-N/-A/-B see → page 85.
5302- 200- 240 00016 24.75
5302- 200- 280 00017 30.05
5302- 200- 320 00018 34.90
5302- 200- 360 00019 38.40

5302- 200- 400 00020 41.90
5302- 225- 40 00021 7.35

5302-
5302-
225-
225-
80
120
00022
00023
10.95
14.55
4
5302- 225- 160 00024 19.80
5302- 225- 200 00025 23.35
5302- 225- 240 00026 28.40
5302- 225- 280 00027 32.80
5302- 225- 320 00028 36.85
5302- 225- 360 00029 40.60
5302- 225- 400 00030 45.95
DETAN
5302- 260- 40 00031 15.20 5
5302- 260- 80 00032 19.45
5302- 260- 120 00033 23.80
5302- 260- 160 00034 28.25
5302- 260- 200 00035 32.45
5302- 260- 240 00036 36.85
5302- 260- 280 00037 41.95
5302- 260- 320 00038 46.80
Framing systems
5302- 260- 360 00039 51.45

5302- 260- 400 00040 55.75
6
Bolts, accessories
87
h a l f e n b r i c kwo r k s u p p o r t s y s t e m – t y p e t e s t e d
HK4-U HK4-UV
Brickwork support system, Brickwork support system

standard version type U, in closed wall area Type UV with height v, in closed wall area
can also be used with can also be used with
1 intermediate brackets type HW (→ page 92),

height adjustable ± 35 mm
intermediate brackets type HW (→ page 92)
Material/version: Material/version:
Stainless steel W 1.4571/1.4401 SS 316 Stainless steel SS 316

x
Load group [kN] Item name Article no. Price
[mm] 0100.010- [EUR/item]
K [mm] Load group [kN]
2 HK4 U- 3.5-130 150 00001 14.55 0100.029- [EUR/item]
HK4 U- 3.5-150 150 00002 14.90 HK4-UV-3.5-SK, v=60 00001 28.05

HK4 U- 3.5-170 150 00003 15.20 Change to offset measurement v every ± 10 mm 0.30
HK4 U- 3.5-190 150 00004 15.50 HK4-UV-7.0-SK, v=60 00002 33.20
HK4 U- 3.5-230 175 00006 17.20 HK4-UV-10.5-SK, v=60 00003 44.15
Please specify K, x (depending on K) and v in mm, see ordering example:
Lifting systems
HK4 U- 7.0-130 200 00008 20.40

HK4 U- 7.0-150 200 00009 20.65
3 HK4 U- 7.0-170 200 00010 20.20 Ordering example
HK4 U- 7.0-190 200 00011 20.65 Item name: Article no.:
HK4 U- 7.0-210 200 00012 21.20 HK4 - UV - 10.5 - 250, x=300, v=80 0100.029-00003, K=250 x=300 v=80
HK4 U- 7.0-230 250 00013 24.35 Measurements K, x, v [mm]
HK4 U- 7.0-250 250 00014 25.00 Load group [kN]
Type
HK4 U-10.5-130 250 00015 30.35 Product group

HK4 U-10.5-150 250 00016 30.90
HK4 U-10.5-170 250 00017 31.60
4 HK4 U-10.5-190
HK4 U-10.5-210
250
250
00018
00019
32.70
33.50
H K 4 - UT
Brickwork support system
HK4 U-10.5-230 300 00020 36.60 Type UT with elevated support plate,
HK4 U-10.5-250 300 00021 37.55 can also be used with with
Other dimensions available upon request. intermediate brackets type HW (→ page 92),
Ordering example
Item name: Article no.:
HK4 - U - 7.0 - 210 0100.010-00012
Material/version:
DETAN
Measurement K [mm]
5 Load group [kN] Stainless steel SS 316
Type
Product group Item name K Price
Article no.
Load group x ➉
[kN] [mm] 0100.039 [EUR/item]
HK4-UT-3.5-SK -00001 19.05
Depth of brickwork support system can be adjusted using adjustment foot JF
→ page 100
HK4-UT-7.0-SK -00002 24.70
Framing systems
6 HK4-UT-10.5-SK -00003 35.40
Please specify K, x (depending on K) in mm, see ordering example:
Ordering example
HK4 - UT - 7.0 - SK, K=190, x=300 0100.039-00002, K=190 x=300
Bolts, accessories
Measurements K, x [mm]
Load group [kN]
7 Type
Product group
➉ Prices for special designs: please see note on page 2.
88
HK4-P HK4-PV

Brickwork support system Brickwork support system
Standard version P, Type PV with height offset measurement v,
near expansion joints, near expansion joints,
height adjustable ± 35 mm height adjustable ± 35 mm
1
Stainless steel SS 316 Stainless steel SS 316
2
Lifting systems
3
Item name Item name Article no. Price
Article no. Price
Load group x Load group [kN]
K [mm] 0100.060- [EUR/item] 0100.079- [EUR/item]
[kN] [mm]
HK4-PV-3.5-SK, v=60 00001 45.90
HK4 P - 3.5 - 130 - 300 150 00001 34.60
0.60

Change to offset measurement v every ± 10 mm
HK4 P - 3.5 - 150 - 300 150 00002 34.25
HK4-PV-7.0-SK, v=60 00002 49.55
HK4 P - 3.5 - 170 - 300 150 00003 34.55
Change to offset measurement v every ± 10 mm 0.60
HK4 P - 3.5 - 190 - 300 150 00005 34.95
HK4-PV-10.5-SK, v=60 00003 57.40
HK4 P - 3.5 - 210 - 300 150 00006 34.95
HK4 P - 3.5 - 230 - 300 175 00007 36.25
Change to offset measurement v every ± 10 mm 0.65 4
HK4 P - 3.5 - 250 - 300 175 00008 36.75 Please specify K, x (depending on K) and v in mm, see ordering example:
HK4 P - 7.0 - 130 - 300 200 00009 38.20

Ordering example
HK4 P - 7.0 - 150 - 300 200 00010 38.50
HK4 P - 7.0 - 170 - 300 200 00011 39.00
HK4 - PV - 10.5 - 250, x=300, v=80 0100.079-00003, K=250 x=300 v=80
HK4 P - 7.0 - 190 - 300 200 00013 38.80
HK4 P - 7.0 - 210 - 300 200 00014 39.00 Measurements K, x, v [mm]
HK4 P - 7.0 - 230 - 300 250 00015 42.15 Load group [kN]
DETAN
HK4 P - 7.0 - 250 - 300 250 00016 42.60 Type
Product group 5
HK4 P - 10.5 - 130 - 300 250 00017 48.55
HK4 P - 10.5 - 150 - 300 250 00018 49.15 Prices for special designs: please see note on page 2.
HK4 P - 10.5 - 170 - 300 250 00019 50.05 Depth of brickwork support system can be adjusted using adjustment foot JF
→ page 100.
HK4 P - 10.5 - 190 - 300 250 00021 50.65
HK4 P - 10.5 - 210 - 300 250 00022 51.45
HK4 P - 10.5 - 230 - 300 300 00023 54.60
Framing systems
HK4 P - 10.5 - 250 - 300 300 00024 55.50

Other dimensions available upon request.
6
Ordering example
HK4 - P - 7.0 - 210 - 300 0100.060-00014
Measurement K [mm]
Load group [kN]
Type
Product group
Bolts, accessories
89
HK4-S HK4-SV
Support system for precast brick units, Support system for precast brick units,
standard version type S, Type SV with height v,
1 Material/version: Material/version:
2
5 or 10
Long holes for connection

to precast elements
Lifting systems
3
x Load group
Load group K
[mm] 0100.080- [EUR/item] [kN] 0100.099- [EUR/item]
[kN] [mm]
HK4 S - 3.5 - 130 150 00001 14.75 HK4-SV-3.5-SK, v=60 00001 32.25
0.30
HK4 S - 3.5 - 150 150 00002 14.70 Change to offset measurement v every ± 10 mm
HK4 S - 3.5 - 170 150 00003 16.35 HK4-SV-7.0-SK, v=60 00002 40.25
HK4 S - 3.5 - 190 150 00004 15.05 Change to offset measurement v every ± 10 mm 0.30
HK4 S - 3.5 - 210 150 00005 16.95 HK4-SV-10.5-SK, v=60 00003 50.60
4 HK4 S - 3.5 - 230 175 00006 18.50 Change to offset measurement v every ± 10 mm 0.35
HK4 S - 3.5 - 250 175 00007 19.60 lease specify K, x (depending on collar K) and v in mm, see ordering
P
example:
HK4 S - 7.0 - 130 200 00008 25.10
HK4 S - 7.0 - 150 200 00009 25.55 Ordering example
HK4 S - 7.0 - 170 200 00010 22.70 Item name: Article no.:
HK4 S - 7.0 - 190 200 00011 24.60 HK4 - SV - 10.5 - 250, x=300, v=80 0100.099-00003, K=250 x=300 v=80
HK4 S - 7.0 - 210 200 00012 23.50 Measurements K, x, v [mm]
HK4 S - 7.0 - 230 250 00013 26.95 Load group [kN]
DETAN
5 HK4 S - 7.0 - 250 250 00014 27.50 Type

Product group
HK4 S - 10.5 - 130 250 00015 34.60
HK4 S - 10.5 - 150 250 00016 35.35 Prices for special designs: please see note on page 2.
HK4 S - 10.5 - 170 250 00017 35.75
HK4 S - 10.5 - 190 250 00018 34.35
HK4 S - 10.5 - 210 250 00019 37.70
HK4 S - 10.5 - 230 300 00020 41.50
Framing systems
HK4 S - 10.5 - 250 300 00021 42.55

6 Ordering example
HK4 - S - 7.0 - 210 0100.080-00012
Measurement K [mm]
Load group [kN]
Type
Product group
Bolts, accessories
7 Installation and assembly components for precast brick units → page 96.
→ page 100.
90
HK4-F HK4-FV

Standard continuous bracket, Standard continuous bracket,
Type F, Type FV with height v,
over openings, over openings,
1
2
Lifting systems
Item name Article no. Price Item name K Article no. Price
x
Load group L
[kN] [mm]
[mm] 0100.119-
[EUR/item] Load group
[kN]
L v
[mm] [mm]
x
[mm] 0100.139-
[EUR/item]
3
HK4 F- 3.5 -K- 995 150/175 - 80.55 HK4 FV- 3.5 -K- 995, v=60 150/175 - 105.55
HK4 F- 3.5 -K- 1245 150/175 - 89.00 HK4 FV- 3.5 -K- 1245, v=60 150/175 - 114.25
HK4 F- 3.5 -K- 1495 150/175 - 97.60 HK4 FV- 3.5 -K- 1495, v=60 150/175 - 123.10
Change to offset measurement v every ± 10 mm 0.60

HK4 F- 7.0 -K- 995 200/250 - 89.65
HK4 F- 7.0 -K- 1245 200/250 - 98.10 HK4 FV- 7.0 -K- 995, v=60 200/250 - 118.20
HK4 F- 7.0 -K- 1495 200/250 - 106.70 HK4 FV- 7.0 -K- 1245, v=60 200/250 - 126.95
HK4 FV- 7.0 -K- 1495, v=60 200/250 - 135.75
HK4 F- 10.5 -K- 995 250/300 - 107.90 Change to offset measurement v every ± 10 mm 0.60 4
HK4 F- 10.5 -K- 1245 250/300 - 118.55
HK4 F- 10.5 -K- 1495 250/300 - 129.20 HK4 FV- 10.5 -K- 995, v=60 250/300 - 141.75
HK4 FV- 10.5 -K- 1245, v=60 250/300 - 152.85
HK4 F- 3.5 -SK 150/175 00001 HK4 FV- 10.5 -K- 1495, v=60 250/300 - 163.80
upon
HK4 F- 7.0 -SK 200/250 00002 Change to offset measurement every ± 10 mm 0.65
request
HK4 F- 10.5 -SK 250/300 00003
Other dimensions available upon request. HK4 FV- 3.5 -SK 150/175 00001
upon
HK4 FV- 7.0 -SK 200/250 00002
request
DETAN
Specify K and L, see ordering example 1.
Specify K, L and if necessary L1 and L2, see ordering example 2.
HK4 FV- 10.5 -SK 250/300
00003
5
Measurement x depends on K.
Price for K measurements between 130 - 250 mm; please specify required K
S pecify K, L and v see ordering example 1.
at the time of order.
Specify K, L, L1 and L2 and v, same as ordering example 2 → HK4-F.
Measurement x depends on K.
Price for K measurements between 130 - 250 mm; please specify required K
Ordering example 1
at the time of order.
Standard bracket lengths L,
L= 995 L1= 247.5 L2= 500
Framing systems
Ordering example
L= 1245 L1= 247.5 L2= 750
Item name:
L= 1495 L1= 247.5 L2= 1000
HK4 - F - 7.0 - 210 - 995, v=90
6
Item name: Offset measurement v [mm]
HK4 - F - 7.0 - 210 - 995 Bracket length L [mm]
Bracket length L [mm] Measurement K [mm]
Measurement K [mm] Load group [kN]
Load group [kN] Type
Type Product group
Product group
Bolts, accessories
Ordering example 2 Prices for special design: please see note on page 2.
Item name:
HK4 - F - 3.5 - 190 - 1180, L1=300, L2=580
→ page 100.
7
or
Article no.:
0100.119-00001, K=190, L=1180, L1=300, L2=580
91
h a l f e n b r i c kwo r k s u p p o r t s y s t e m
HW-95 KW
Support angle, Material/version: Bolt-on angle, Material/version:

Type HW-95 Stainless steel SS 316 Type KW Stainless steel SS 316
as intermediate bracket,
1 type tested Standard lengths L:

500 mm, 750 mm,
1000 mm
Item name Article no. Item name Article no.

Price Price
Bracket length L Load group K L
[EUR/item] 0111.010- [EUR/item]
b x c x s [mm] [mm] 0110.010- [kN] [mm] [mm]
HW 95 x 20 x 2 - 480 00002 10.35 KW - 1.2 - 100 - 500 00001 37.55
Lifting systems
HW 95 x 30 x 3 - 730 00003 23.50 KW - 1.2 - 100 - 750 00002 55.50

KW - 1.2 - 100 - 1000 00003 71.10
3 HW 95 x 40 x 4 - 980 00004 42.50
HW-90 KW - 1.2 - 120 - 500 00004 44.90

Loose angle, Material/version: Stainless steel KW - 1.2 - 120 - 750 00005 67.20
Type HW-90 W 1.4571/1.4401 (SS 316) KW - 1.2 - 120 - 1000 00006 85.60
as support bracket
KW - 2.1 - 100 - 500 00007 50.95
KW - 2.1 - 100 - 750 00008 75.75

KW - 2.1 - 100 - 1000 00009 98.05
4 KW -
KW -
2.1 -
2.1 -
120 - 500
120 - 750
00010
00011
61.35
91.80
KW - 2.1 - 120 - 1000 00012 118.55
KW - 3.2 - 100 - 500 00013 65.40

Item name KW - 3.2 - 100 - 750 00014 99.55
Article no. Price
Bracket length L KW - 3.2 - 100 - 1000 00015 128.40
0110.010- [EUR/item]
b x c x s [mm] [mm]
HW 90 x 30 x 3 - 700 00025 26.95 KW - 3.2 - 120 - 500 00016 81.20
HW 90 x 30 x 3 - 950 00026 35.45 KW - 3.2 - 120 - 750 00017 121.35
DETAN
5 HW 90 x 45 x 3 - 1200 00027 49.70 KW - 3.2 - 120 - 1000 00018 156.15

HW 90 x 60 x 3 - 1200 00028 55.15
HW 90 x 60 x 3 - 1450 00029 66.10 KW -SK –special design 0111.019.00001 upon request
HW 90 x 60 x 4 - 1450 00030 85.30
HW 90 x 60 x 5 - 1450 00031 104.45 Ordering example
HW 90 x 90 x 4 - 1700 00032 119.95 Item name: Article no.:
HW 90 x 90 x 5 - 1700 00033 147.40 KW -3.2- 100- 750 0111.010.00014
HW 90 x 90 x 4 - 1950 00034 137.10 Bracket length L [mm]
Framing systems
HW 90 x 90 x 5 - 1950 00035 168.70 Collar length K [mm]

HW 90 x 90 x 6 - 1950 00036 200.60 Load group [kN]
6 HW 90 x 90 x 5 - 2200 00037 190.10 Type
HW 90 x 90 x 6 - 2200 00038 226.15
HW 90 x 90 x 8 - 2200 00039 259.10
HW 90 x 100 x 8 - 2200 00040 274.55
Ordering example
HW 90 x 60 x 4-1450 0110.010.00030
Bolts, accessories
Bracket length L [mm]

7 Measurements c x s [mm]
Type
92
KWL HTA 38/17 or 38/17-K, for HK4 load group 3.5 kN

Bolt-on angle, Material/version: HALFEN cast-in channel,
Type KWL Stainless steel SS 316 officially approved
Z - 21.4 - 34
Standard lengths L:
500 mm, 750 mm, 1
1000 mm
Standard
head shape
2
Item name Number Article no. Price
Length [mm] of studs 0001.020- [EUR/item]
Item name Article no. HTA 38/17 -A4 -100 -Vf -anch.A4 2 01001 13.80
Price
Load group K L HTA 38/17 -A4 -150 -Vf -anch.A4 2 01002 16.05
0112.010- [EUR/item]
[kN] [mm] [mm]
HTA 38/17 -A4 -200 -Vf -anch.A4 2 01003 18.05
KWL - 3.2 - 130 - 500 00022 95.55
Lifting systems
KWL - 3.2 - 150 - 500 00025 101.35 K-SS 316-anchor SS 316 = reduced anchor distance ≤ 200 mm, channel and
KWL - 3.2 - 170 - 500 00028 110.15
KWL - 3.2 - 190 - 500 00031 121.20
anchor, stainless steel
0001.030-
3
KWL - 3.2 - 210 - 500 00034 130.05 HTA 38/17 -K -A4 - 250 -Vf -anch.A4 3 00101 23.15
HTA 38/17 -K -A4 -1050 -Vf -anch.A4 6 00104 73.30
KWL - 3.2 - 130 - 750 00023 136.95 HTA 38/17 -K -A4 -6070 -Vf -anch.A4 31 00001 407.65

KWL - 3.2 - 150 - 750 00026 150.20
KWL - 3.2 - 170 - 750 00029 163.50 Suitable bolt Article no. Price
PU
KWL - 3.2 - 190 - 750 00032 180.10 Material W 1.4571/ 1.4401 (A4) [EUR/
[items]
KWL -
KWL -
3.2 -
3.2 -
210 -
230 -
750
750
00035
00038
193.40
209.90
Item name
HS 38/17 - M12 x 72 50
0161.050-
00001
100 items]
384.65
4
KWL - 3.2 - 250 - 750 00041 223.15
KWL - 3.2 - 130 - 1000 00024 171.35 HTA 49/30, suitable for HK4 load group 7.0 kN
KWL - 3.2 - 150 - 1000 00027 189.00 HALFEN cast-in channel,
KWL - 3.2 - 170 - 1000 00030 206.75 officially approved
KWL - 3.2 - 190 - 1000 00033 232.15 Z - 21.4 - 34
KWL - 3.2 - 210 - 1000 00036 249.90
KWL - 3.2 - 230 - 1000 00039 272.00
DETAN
KWL - 3.2 - 250 - 1000 00042 289.65 5
KWL -SK –special design 0112.019.00001 upon request HS 50/30
Standard
head shape
Ordering example Article no.
Item name Number Price
KWL-3.2-170-1000 0112.010.00030
Bracket length L [mm]
Framing systems
HTA 49/30 -A4 -150 -Vf -anch.A4 2 00101 21.20

Collar length K [mm] HTA 49/30 -A4 -200 -Vf -anch.A4 2 00102 24.70
Load group [kN]
Type
HTA 49/30 -A4 -250 -Vf -anch.A4
HTA 49/30 -A4 -300 -Vf -anch.A4
2
2
00103
00104
28.65
33.05
6
HTA 49/30 -A4 -350 -Vf -anch.A4 3 00105 40.15
HTA 49/30 -A4 -400 -Vf -anch.A4 3 00106 44.35
HTA 49/30 -A4 -550 -Vf -anch.A4 3 00107 57.45
HTA 49/30 -A4 -1050 -Vf -anch.A4 5 00108 105.55
HTA 49/30 -A4 -3050 -Vf -anch.A4 13 00109 302.80
HTA 49/30 -A4 -6070 -Vf -anch.A4 25 00001 574.05
Bolts, accessories
Suitable bolt Price

PU
Material W 1.4571/ 1.4401 (A4)
Item name
[items]
Article no.
0161.090-
[EUR/
100 items]
7
HS 50/30 - M12 x 87 50 00001 821.70
For other bolts, see pages 136 - 138.
93
HTA 54/33, suitable for HK4 load group 10.5 kN HCB, drilled bolt for cracked concrete in tension zone
HALFEN cast-in channel, HALFEN concrete screw Material: Stainless steel

officially approved Type HCB, W 1.4401/ 1.4404 (SS 316)
Z - 21.4 - 34 officially approved
1 and tested
Z - 21.1 - 1677 chaising tool M 12
hexagon nut
U-washer

D x L [mm] [EUR/
[items] 0436. 100 items]

HCB-WH 10 x 95 -A4 10 010-00001 738.10
HCB-EH 10 x 160 M12 x 55-A4 , 10 020-00001 935.45
2 PE [items] = packaging unit [items]
Suitable for securing brickwork support system HK4, verification needed.
Standard head shape Delivery type K = 'complete': Bolt, nut & washer (adhesive cartridge
HS 50/30 if required)
H K - DA
Item name Number Article no. Price
Cover anchor
Type HK-DA
SS 316-anchor SS 316 = channel + anchor, stainless steel W1.4571/1.4401 (A4)
Lifting systems
HTA 54/33 -A4 -150 -Vf 2 00101 33.80 Scope of supply:

HTA 54/33 -A4 -200 -Vf 2 00102 41.45 With toothed plate
3 HTA 54/33 -A4 -250 -Vf 2 00103 48.20 and hexagonal nut
HTA 54/33 -A4 -300 -Vf 2 00104 56.30
HTA 54/33 -A4 -350 -Vf 3 00105 68.20
HTA 54/33 -A4 -400 -Vf 3 00106 75.95 Can be used for all
brickwork support system
HTA 54/33 -A4 -550 -Vf 3 00107 97.80
types HK4 of load groups
HTA 54/33 -A4 -1050 -Vf 5 00108 180.55 3.5 and 7.0 kN
HTA 54/33 -A4 -6070 -Vf 2 00001 818.60 Item name Article no. Price
Load group [kN] 0156. [EUR/item]
Suitable bolt Article no. Price HK-DA - 3.5 010-00001 22.45
PU
4 Material W 1.4571/ 1.4401 (A4)
Item name
[items] 0161.090-
[EUR/
100 items]
HK-DA - 7.0 010-00005 26.40
HS 50/30 - M16 x 87 25 00002 1,048.95

HALFEN cast-in channels or HALFEN bolts can also be supplied in FV = hot-dip
galvanised or GV = galvanised, for order numbers see pages 136 - 137.
Please note: Fixing material for façade connection systems see

chapter 7 bolts, accessories, page 136
DETAN
5
Framing systems
6
Bolts, accessories
94
HSL- G 1 KM-U / KM-UV

Threaded loop Material/version: Grout-in brackets Material/version:
Type HSL-G1 SS 316 Both also suitable for use Stainless steel SS 316
for HK4-S/-SV (→ page 90) with intermediate brackets, type HW (→ page 92)
Load group Article no. Price
Item name
[kN] 0122. [EUR/item]
HSL - G1 M 8 x 220
HSL - G1 M 10 x 220
3.5
7.0
040-00002
040-00003
2.70
3.45
2
HSL - G1 M 12 x 220 10.5 040-00004 4.40
HSL- G 3 K [mm] 0102.010- [EUR/item]
Threaded loop Material/version: KM - U - 110 00001 24.00
Type HSL-G3 SS 316 KM - U - 130 00002 25.40
for HK4-S/-SV (→ page 90), KM - U - 150 00003 26.65
Lifting systems
type tested KM - U - 170 00004 28.00
KM - U - 190 00005 28.80
KM - U - 210 00006 31.05 3
KM - U - 230 00007 31.55
KM - U - 250 00008 33.95
KM - U -SK, KM - UV - SK 0102.009-00001 upon request

Load group Article no. Price Please specify version, K and if required v
Item name
[kN] 0122. [EUR/item] at the time of order
HSL - G3 M 8 x 220 3.5 030-00001 5.40
HSL - G3 M 10 x 220 7.0 030-00003 6.50
HSL - G3 M 12 x 220 10.5 030-00004 7.95
KM-E
Grout-in brackets
4
for corner area
HTA - ES Both also suitable for use
HALFEN cast-in channel Material/version: with intermediate
Type HTA-ES SS 316 brackets, Type HW
for HK4-S/-SV (→ page 90), (→ page 92)
type tested
DETAN
5

Load group Article no. Price K [mm] [EUR/item]
Item name 0102.050-
[kN] 0121. [EUR/item]
KM - E - 110 00001 36.50
HTA 28/15 ES - A4 - Vf 3.5 010-00001 6.20
KM - E - 130 00002 38.35
HTA 38/17 ES - A4 - Vf 7.0 010-00003 8.40
Framing systems
KM - E - 150 00003 40.25

HTA 28/15 ES - A4 - Vf 10.5 010-00004 11.35
KM - E - 170 00004 42.05
KM - E - 190 00005 48.75 6
System for connecting HTA-ES to HK4-S/-SV KM - E - 210 00006 51.60
→ 2 bolts and washers required per channel! KM - E - 230 00007 55.25
KM - E - 250 00008 58.40

Item name KM - E -SK, KM - EV - SK 0102.009-00001 upon request
[items] 0350. [EUR/100 items]
HALFEN bolts HS
Please specify version, K and if required v at the time of order
Bolts, accessories
HS 28/15 - A4 - 70 - M10x30 50 020-00015 498.95 Ordering example

HS 28/17 - A4 - 70 - M10x30 50 050-00001 774.85 Item name: Article no.:
HS 50/30 - A4 - 50 - M12x40 50 090-00002 1,280.95 KM - E - SK - 300 0102.009.00001, KM-E, K=300 7
K [mm]
Washers US 0370. Special design
US - A4 - M10 - DIN 9021 100 040-00002 45.60 Type
US - A4 - M12 - DIN 125 100 050-00005 31.15 Product group
95
KM-P / KM-PV HSL - A 1

Grout-in brackets Material/version: Suspension loop Material/version:

Stainless steel SS 316 Type HSL-A1 Stainless steel SS 316
for individual brickwork
1 support system HK4-U/-UV


2 [items] 0122.010- [EUR/item]
HSL - A1 - A4 10 00001 1.40
Item name Article no. Price HSL- W. . .

K [mm] 0102.040- [EUR/item]
Suspension loop Material/version:
KM - P - 110 - A4 00001 53.90
Type HSL-W... Stainless steel SS 316
KM - P - 130 - A4 00002 55.05 for bracket and brick-
KM - P - 150 - A4 00003 56.20 work support system
Lifting systems
KM - P - 170 - A4 00004 57.40 Types P, PV, F, FV

KM - P - 190 - A4 00005 58.10
3 KM - P - 210 - A4 00006 60.20
KM - P - 230 - A4 00007 60.75
KM - P - 250 - A4 00008 62.85
KM - P -SK, KM - PV - SK 0102.009-00001 upon request

Other dimensions available upon request. Item name PU Article no. Price
Please specify version, K and if required v b / c / s [mm] [items] 0122.050- [EUR/item]

at the time of order HSL - W20 - 1 - A4 90-100 20 2-6 10 00001 1.65
Ordering example HSL - W30 - 1 - A4 90-100 30 3-6 10 00002 1.65
Item name: Article no.: HSL - W40 - 1 - A4 90-100 40 3-6 10 00003 1.65
4 KM - P - 170 0102.010.00004
HSL - W50 - 1 - A4 90-100 50 3-6 10 00004 1.65
HSL - W60 - 1 - A4 90-100 60 3-6 10 00005 1.65
K [mm] HSL - W70 - 1 - A4 90-100 70 4-8 10 00006 1.80
Type HSL - W80 - 1 - A4 90-100 80 4-8 10 00007 1.80
Product group
HSL - W90 - 1 - A4 90-100 90 4-8 10 00008 1.85
FS W
Precast support bracket, Material/version:
Type FSW, Stainless steel SS 316
DETAN
5 type tested
Framing systems
holder on site
6
Bolts, accessories

Load group [kN]
7 b [mm] 0120.010- [EUR/item]
FSW - 3.5 - 80 - A4 00002 6.35

FSW - 5.3 - 80 - A4 00006 8.55
FSW - 6.8 - 80 - A4 00007 18.55
Prices for special designs: please see note on page 2.
96
MB LSA - W : F o r i n s e r t i n g i n M W

Masonry reinforcement Material/version: Cavity wall tie Material/version:
Type MB-3000/50-4 Stainless steel SS 316 Type LSA-W Stainless steel SS 316

[items] 0150.010- [EUR/item] Item name Cavity PU Article no. Price
L / d / c [mm] [mm] [items] 0142.070- [EUR/100 items]
MB-3000/50-4 1 00001 47.65
LSA - W - 225/4/25 41.40
up to 100 250 00001
HSL- Z LSA - W - 250/4/25 100-125 250 00002 45.15
LSA - W - 275/4/25 125-150 250 00003 49.70
Stainless steel wire Material/version:
Type HSL-Z Stainless steel SS 316 LSA - W - 300/4/25
LSA - W - 340/4/25
150-175
175-215
250
250
00004
00005
53.50
60.50
2
as longitudinal reinforcement
LSA - DW : B r i c k t i e t o c o n c r e t e
Cavity wall tie Material/version:
Type LSA-DW Stainless steel SS 316
Item name PU Article no. Price incl. dowel 8 x 60
[items] 0123.010- [EUR/item] officially approved
Z-21.2-1009 or Z-17.1-825
Lifting systems
HSL - Z 01 Ø 4mm L = 3.00 m 10 00002 4.40
HSL - Z 01 Ø 4mm L = 1.00 m 10 00001 1.45
3
B RS PU Article no. Price
Item name Cavity
Rebars BSt 500 NR Material/version: d [mm] [mm] [items] 0142.080- [EUR/100 items]
Type BRS; Stainless steel SS 316
LSA - DW - 160/4 up to 25 250 00001 53.95
officially approved
LSA - DW - 180/4 25-45 250 00002 58.80
Z-1.4-80 (Ø 6-14)
LSA - DW - 210/4 24-75 250 00003 63.80

or Z-1.4-119 (Ø 16-25)
LSA - DW - 250/4 75-115 250 00004 70.55
LSA - DW - 275/4 115-140 250 00005 74.75
LSA - DW - 300/4 140-165 250 00006 79.50
LSA - DW - 320/4 165-185 250 00007 85.50 4
LSA - DW - 350/4 185-200 250 00008 93.35
HEA
Item name Bar Ø dS Bar length Article no. Price Cavity wall tie Material/version:
[mm] [mm] 0069.010- [EUR/item] Type HEA Stainless steel SS 316
BRS - 6 - A4 6 00001 22.25 officially approved
BRS - 8 - A4 8 00002 39.50 Z-21.1-910
BRS - 10 - A4 10 00003 61.75
DETAN
BRS - 12 - A4
BRS - 14 - A4
12
14
6000
00004
00005
88.85
121.15 5
BRS - 16 - A4 16 00006 173.85
BRS - 20 - A4 20 00007 298.35
BRS - 25 - A4 25 00008 531.35
Item name Cavity PU Article no. Price
Length L / d [mm] [mm] [items] 0140.010- [EUR/100 items]
S pecify bar length L [mm] and if required bent shape at the time of order.
The cut length surcharge is 20 %. HEA - 160/4 - A4 up to 45 100 00001 71.95
HEA - 200/4 - A4 45-85 100 00002 75.20
Framing systems
There is a drive-in pipe in every PU of 250 items

HEA - 250/4 - A4 85-135 100 00004 78.50
PU [items] = packaging unit [items] HEA - 300/4 - A4 135-185 100 00006 88.35
6
HEA - 200/5 - A4 45-85 100 00003 91.55
HEA - 250/5 - A4 85-135 100 00005 104.70
HEA - 300/5 - A4 135-185 100 00007 121.00
Price
Suitable driving-in tool or guide pipe [EUR/item]
0143.020-
Bolts, accessories
HEA - EW 4 for HEA-../4 1 00001 26.40

HEA - EW 5 for HEA-../5 1 00002 26.40
7
Suitable drill
0143.010-
HEA - BB 4 - 6x40 for HEA-../4 1 00001 9.80
HEA - BB 5 - 7x40 for HEA-../5 1 00002 11.85
97
HP V - L : HGA -Q
Aerated cavity wall tie Material/version: Scaffold anchor,

Type HPV-L Stainless steel SS 316 Type HGA-Q
with inner thread,
1 incl. plastic cap
Material/version:
Stainless steel SS 316
Item name Cavity PU Article no. Price

Length L / d [mm] [mm] [items] 0141.010- [EUR/100 items]
HPV - L - 240/4 87.20
up to 80 100 00001
HPV - L - 280/4 80-120 100 00002 98.10 Item name Article no. Price
HPV - L - 320/4 120-160 100 00003 109.00 K [mm] 0159.010- [EUR/item]
2 Suitable screw-in and guide pipe

Price
[EUR/ item]
HGA - Q - 160 - A4
HGA - Q - 185 - A4
00001
00002
22.70
22.90
0143.030 HGA - Q - 210 - A4 00003 23.80
HPV - Z1 for HPV-L-../4 00001 4.25 HGA - Q - 235 - A4 00004 27.75
HGA - Q - 260 - A4 00005 28.95
LSA-L: MW cavity tie HGA - Q - SK - A4 0159.019-00001 upon request
with washer (stainless steel SS 316) + drip disc Ring bolt HGA-RS (see below) and dowel (→ page 149 - 155) ordered separately!
HGA -ZN
Lifting systems
Scaffold anchor,
3 Type HGA-ZN
with inner thread,
ege drip
washer incl. plastic cap
Item name Cavity PU Article no. Price Material/version:

Length L / d [mm] [mm] Stainless steel SS 316
[items] 0142.050- [EUR/100 items]
LSA - L - 235/4 20 - 150 100 00001 98.10

K [mm] 0159.020- [EUR/item]
Nylon plug + hexagonal retaining screw suitable for LSA-L (A4)
HGA - ZN - 115 - A4 00001 6.10
PU Price
4 [items]
0432.010-
[EUR/100 items]
HGA - ZN - 145
HGA - ZN - 175
- A4
- A4
00002
00003
6.50
7.00
DUE - FUR 10x80 SS A4 100 00001 371.85
HGA - ZN - 205 - A4 00004 7.35
HGA - ZN - SK - A4 0159.029-00001 upon request
LSZ
Ordering example
Insulation holder with drip nose Material/version:
Type LSZ - ISO - CLIP plastic
HGA - ZN - 175 - A4 0159.020-00003
Insulation board holder Material/version: Length L [mm]

DETAN
Type
5 Type LSZ - DAEM - 60 plastic
Product group
Ordering example
Drip nose Material/version: HGA - ZN - SK - 275 - A4 0159.029-00001, L=275
Type LSZ - TROP - 25 plastic
Length L [mm]
PU Article no. Price Special design
Item name for anchor
Type
Ø [mm] [items] 0143.050- [EUR/100 items]
Framing systems
Product group
LSZ - ISO - CLIP 3-6 3-6 250 00002 3.10
6 LSZ - DÄMM - 60/3-5 3-5 250 00001 2.55 Please specify measurement required L / K, see ordering example.
Ring bolt HGA-RS (see below) and dowel (→ page 149 - 155) ordered separately!
Item name for anchor PU Article no. Price H G A - RS

Ø [mm] [items] 0143.060- [EUR/100 items]
Ring bolt
LSZ - TROP - 25/3-5 3-5 250 00001 0.70
Type HGA-RS
Material/version:
electro plated
Bolts, accessories

0160.000- [EUR/100 items]
HGA - RS - M12 x 70 GV 00001 438.20
HGA-RS suitable for scaffold anchors HGA-Q and HGA-ZN
98
HAV H M S 2 5 / 15 D

Attic brick anchor HALFEN brick tie channels
Type HAV with lug anchors and
filler (Vf) Lug anchor Lug anchor
(pre-cut, (pre-cut,
Material/version:
Stainless steel SS 316 easy to easy to 1
bend out) bend out)
Profile 28/15
l [mm] 0013.010- [EUR/item]
SS 316 = stainless steel SS 316
HMS 25/15 D - A4 - 2500 - Vf 00002 25.90
Brick tie anchor
Type ML
2
ML
(ordered separately
→ right column) HALFEN brick tie anchor Installation
suitable for diagram
brick tie channels HMS 25/15D and
profile HTA 28/15
Item name b Article no. Price
Min. distance from wall a [mm] [mm] 0155.000- [EUR/item]
Lifting systems
HAV 80/ 600 - A4 75 00001 45.95
HAV 80/ 850 - A4
HAV 80/ 1100 - A4
75
75
00002
00003
57.00
70.40
l [mm] [items] 0132.010- [EUR/100 items]
SS 316= stainless steel grade SS 316
HAV SK - A4 0155.009-00001 upon request
ML - 85 - A4 200 00001 235.40
in. - max. distance from wall a when using the following
M ML - 120 - A4 200 00002 287.75
brick tie anchor: ML 85: 80 - 110 mm ML - 180 - A4 200 00003 354.55

ML 120: 90 - 145 mm
ML 180: 145 - 200 mm
MLQ
Special design, specify measurements b and L at the time of order. HALFEN brick tie anchor
suitable for brick tie channels HMS 25/15 D and profile HTA 28/15
4
Ordering example
HAV - 80 / 1100 0155.000-00003
Length L [mm]
Min. distance of wall a [mm]
MLQ-D = double-sided MLQ-E = one-sided
Product group
DETAN
l [mm]
SS 316 = stainless steel grade SS 316
0132.020- [EUR/100 items]
5
HTA 2 8 / 15
MLQ - D - 85 - A4 00001 1,430.20
MLQ - D - 120 - A4 00002 1,469.65
officially approved
Z - 21.4 - 34 MLQ - D - 180 - A4 00003 1,534.90
0132.030-
MLQ - E - 85 - A4 00001 1,178.90
MLQ - E - 120 - A4 00002 1,216.65
Framing systems
MLQ - E - 180 - A4 00003 1,283.65

MLS 6
Length [mm] anchors 0001.010- [EUR/item] HALFEN brick tie perpendicular anchor
suitable for
SS 316-anchor SS 316 = channel + anchor, stainless steel SS 316
Brick tie channels HMS 25/15D and
HTA 28/15 - A4- 100 Vf - anch.A4 2 01001 11.25 Profile HTA 28/15
HTA 28/15 - A4- 150 Vf - anch.A4 2 01002 12.55
HTA 28/15 - A4- 200 Vf - anch.A4 2 01003 13.80
HTA 28/15 - A4- 250 Vf - anch.A4 2 01004 15.25
Bolts, accessories
HTA 28/15 - A4- 300 Vf - anch.A4 2 01005 16.45

HTA 28/15 - A4- 350 Vf - anch.A4 3 01006 20.50 Item name PU Article no. Price
HTA 28/15 - A4- 400 Vf - anch.A4
HTA 28/15 - A4- 550 Vf - anch.A4
3
3
01007
01008
21.90
26.65
l [mm] [items] 0132.040- [EUR/100 items] 7
HTA 28/15 - A4- 1050 Vf - anch.A4 5 01009 48.40 MLS - 300 - A4 200 00001 739.95
99
ML 1 JF
HALFEN brick tie anchor Adjustment foot Material/version:

Application diagram:
for connecting masonry with thin mortar joints Type JF; Stainless steel SS 316
to HALFEN cast-in channels HTA 28/15 or HMS 25/15D welded on
1 threaded socket
incl. adjustment bolt

l [mm] 0132.080- [EUR/100 items]

ML 1 - 125 -A2 00001 155.75
2 ML 1 - 185 -A2 00002 178.80
ML 1 - 245 -A2 00003 194.75
•C an be supplied for all HK4 brickwork support systems,
ML - G types -U, -UV, -S, -SV, -P, -PV, -F, -FV
• Load groups 3.5 kN and 7.0 kN
Debond sleeve (plastic), suitable for Application diagram: • With adjustment measurements j ≤ 155 mm, please
HALFEN brick tie anchor ML specify adjustment measurement j or screw length L.
ML anchor HK4- Adjustment foot measurements

Lifting systems
Load group n r Ø
Debond sleeve
[kN] [mm] [mm] [mm]
3 ML-G 150
3.5 50 26 M 10
7.0 70 30 M 12
Ordering example for HK4-U with adjustment foot

Item name Article no. Price Article no.
Item name Price
0134.010- [EUR/100 items] [EUR/item]
ML - G - 150 00001 97.60 HK4 - U - 7.0 - 190 - JF - 170 - SK upon request
4 Adjustment foot, screw length L [mm]

K [mm]
Load group [kN]
Version
Type
ACCESSORIES
Material/version:
Stainless steel SS 316
DETAN
5
Framing systems
Plate with Bottom plate Compensating Compensating

6 diagonal hole bracket HK-AW tie HK-AL

Load group [kN] 0157.000- [EUR/item]
Plate with diagonal hole 3.5 / 7.0 / 10.5 kN 00001 1.65
0158.000-
Bottom plate 3.5 kN 00001 0.30
Bottom plate 7.0 / 10.5 kN 00002 0.45
Bolts, accessories

7 HK-AW-3
Material thickness t [mm] 0156.020-
00001
[EUR/item]
3.10
HK-AW-6 00002 3.55
0156.030-
HK-AL-3 00001 4.40
100
HALFEN n at u r a l s to n e B O DY a n c h o r
HALFEN HR M / HRC b o d y a n c h o r HALFEN B A b o d y a n c h o r

support anchor support anchor
Design 1 Design 1
with one loose pin and one sliding sleeve with one loose pin and one sliding sleeve
Design 2 Design 2
1
with half pin, pressed with half pin, pressed
Material: Stainless steel SS 316 Material: Stainless steel SS 316
0191.010- [EUR/item] 0754.010- [EUR/item]
HRM 500-1-A4 00028 9.10 BA 606 -1-A4 00001 8.45
HRC 504-1-A4 0190.010-00026 8.10 BA 608 -1-A4 00023 10.55
HRM 505-1-A4 00029 8.35 BA 610 -1-A4 00024 12.05
HRM 506-1-A4 00030 8.45 BA 612 -1-A4 00004 11.00 2
HRM 408-1-A4 00031 8.90 BA 1308 -1-A4 00009 12.75
HRM 410-1-A4 00032 9.30 BA 1310 -1-A4 00010 13.55
HRM 411-1-A4 00038 upon request BA 1312 -1-A4 00011 13.95
HRM 413-1-A4 00033 9.80 0754.020-
0191.020- BA 606 -2-A4 00001 9.10
HRM 500-2-A4 00028 10.10 BA 608 -2-A4 00023 11.35
HRC 504-2-A4 0190.020-00026 8.95 BA 610 -2-A4 00024 12.90
Lifting systems
HRM 505-2-A4 00029 9.20 BA 612 -2-A4 00004 11.80
HRM
HRM
506-2-A4
408-2-A4
00030
00031
9.25
8.25
BA 1308 -2-A4
BA 1310 -2-A4
00009
00010
16.00
16.85 3
HRM 410-2-A4 00032 9.60 BA 1312 -2-A4 00011 17.45
HRM 411-2-A4 00038 upon request
HRM 413-2-A4 00033 10.25 HALFEN D H b o d y a n c h o r
Restraint tie
HALFEN DT b o d y a n c h o r

Design 1
support anchor with one loose pin and one sliding sleeve
Design 1
with one loose pin and one sliding sleeve Design 2
Design 2
with half pin, pressed
4
with half pin, pressed Material: Stainless steel SS 316

Material: Stainless steel SS 316
0756.010- [EUR/item]
Item name Article no. Price DH 1006 -1-A4 00001 4.85
0755.010- [EUR/item] DH 1008 -1-A4 00002 4.90
DT 414 -1-A4 00001 15.25 DH 1010 -1-A4 00003 5.20
DT 416 -1-A4 00002 15.70 DH 1712 -1-A4 00004 6.60
DETAN
DT 418 -1-A4 00003 17.40 DH 1714 -1-A4 00005 6.80
DT 420 -1-A4 00004 18.30 DH 1716 -1-A4 00006 6.45 5
DT 422 -1-A4 00005 20.50 DH 1718 -1-A4 00007 7.10
DT 424 -1-A4 00006 20.90 DH 1720 -1-A4 00008 7.15
DT 1314 -1-A4 00013 26.60 DH 1722 -1-A4 00009 7.25
DT 1316 -1-A4 00014 26.75 DH 1724 -1-A4 00010 7.05
DT 1318 -1-A4 00015 30.25 0756.020-
DT 1320 -1-A4 00016 30.75 DH 1006 -2-A4 00001 5.75
DT 1322 -1-A4 00017 34.10
Framing systems
DH 1008 -2-A4 00002 5.80

DT 1324 -1-A4 00018 37.25 DH 1010 -2-A4 00003 6.25
DT 414 -2-A4
0755.020-
00001 15.60
DH 1712 -2-A4
DH 1714 -2-A4
00004
00005
7.45
6.90
6
DT 416 -2-A4 00002 16.05 DH 1716 -2-A4 00006 6.55
DT 418 -2-A4 00003 17.80 DH 1718 -2-A4 00007 7.95
DT 420 -2-A4 00004 18.75 DH 1720 -2-A4 00008 7.30
DT 422 -2-A4 00005 21.05 DH 1722 -2-A4 00009 8.20
DT 424 -2-A4 00006 21.45 DH 1724 -2-A4 00010 7.15
DT 1314 -2-A4 00013 27.00
Bolts, accessories
DT 1316 -2-A4 00014 27.25

DT 1318 -2-A4 00015 30.60
DT 1320 -2-A4 00016 31.15 7
DT 1322 -2-A4 00017 34.55
DT 1324 -2-A4 00018 37.60
101
HALFEN U M A n at u r a l s to n e a n c h o r g r o u t - i n a n c h o r
HALFEN U M A g r o u t - i n a n c h o r HALFEN U M A g r o u t - i n a n c h o r

Design 1 Design 2
with one loose pin and one sliding sleeve with half pin, pressed
1 Material: Stainless steel SS 316

Ø L 0170.000- [EUR/item] Ø L 0171.000- [EUR/item]
UMA 10-1-120 -A4 00001 1.95 UMA 10-2-120 -A4 00001 2.25
UMA 10-1-150 -A4 00002 2.25 UMA 10-2-150 -A4 00002 2.55
UMA 10-1-180 -A4 00003 2.55 UMA 10-2-180 -A4 00003 2.80
UMA 10-1-210 -A4 00004 3.05 UMA 10-2-210 -A4 00004 3.45
UMA 10-1-240 -A4 00005 3.35 UMA 10-2-240 -A4 00005 3.65
UMA 12-1-120 -A4 00006 2.50 UMA 12-2-120 -A4 00006 2.75
UMA 12-1-150 -A4 00007 2.40 UMA 12-2-150 -A4 00007 2.75
2 UMA 12-1-180 -A4
UMA 12-1-210 -A4
00008
00009
2.80
3.25
UMA 12-2-180 -A4
UMA 12-2-210 -A4
00008
00009
3.10
3.55
UMA 12-1-240 -A4 00010 3.80 UMA 12-2-240 -A4 00010 4.10
UMA 16-1-120 -A4 00068 3.25 UMA 16-2-120 -A4 00068 3.20
UMA 16-1-150 -A4 00069 3.45 UMA 16-2-150 -A4 00069 3.35
UMA 16-1-180 -A4 00070 3.90 UMA 16-2-180 -A4 00070 3.80
UMA 16-1-210 -A4 00071 4.05 UMA 16-2-210 -A4 00071 3.90
UMA 16-1-240 -A4 00072 4.35 UMA 16-2-240 -A4 00072 4.15
Lifting systems
UMA 16-1-270 -A4 00073 4.80 UMA 16-2-270 -A4 00073 4.60
UMA 18-1-120 -A4 00023 4.35 UMA 18-2-120 -A4 00023 4.55
3 UMA 18-1-150 -A4 00024 4.60 UMA 18-2-150 -A4 00024 4.85
UMA 18-1-180 -A4 00025 5.00 UMA 18-2-180 -A4 00025 5.25
UMA 18-1-210 -A4 00026 5.65 UMA 18-2-210 -A4 00026 5.80
UMA 18-1-240 -A4 00027 6.10 UMA 18-2-240 -A4 00027 6.30
UMA 18-1-270 -A4 00028 6.65 UMA 18-2-270 -A4 00028 7.00
UMA 18-1-300 -A4 00029 7.00 UMA 18-2-300 -A4 00029 7.15
UMA 18-1-330 -A4 00030 7.95 UMA 18-2-330 -A4 00030 8.15
UMA 18-1-360 -A4 00031 8.75 UMA 18-2-360 -A4 00031 8.95
UMA 22-1-180 -A4 00032 5.95 UMA 22-2-180 -A4 00032 6.25
UMA 22-1-210 -A4 00033 6.65 UMA 22-2-210 -A4 00033 7.00
4 UMA 22-1-240 -A4 00034 7.15 UMA 22-2-240 -A4 00034 7.45
UMA 22-1-270 -A4 00035 7.90 UMA 22-2-270 -A4 00035 8.10
UMA 22-1-300 -A4 00036 8.50 UMA 22-2-300 -A4 00036 8.80
UMA 22-1-330 -A4 00037 9.45 UMA 22-2-330 -A4 00037 9.75
UMA 22-1-360 -A4 00038 10.45 UMA 22-2-360 -A4 00038 10.70
UMA 22-1-390 -A4 00039 11.15 UMA 22-2-390 -A4 00039 11.45
UMA 25-1-210 -A4 00040 8.45 UMA 25-2-210 -A4 00040 8.75
UMA 25-1-240 -A4 00041 9.30 UMA 25-2-240 -A4 00041 9.60
UMA 25-1-270 -A4 00042 10.25 UMA 25-2-270 -A4 00042 10.55
DETAN
UMA 25-1-300 -A4 00043 10.70 UMA 25-2-300 -A4 00043 11.00
5 UMA 25-1-330 -A4 00044 12.00 UMA 25-2-330 -A4 00044 12.30
UMA 25-1-360 -A4 00045 12.70 UMA 25-2-360 -A4 00045 12.90
UMA 25-1-390 -A4 00046 13.80 UMA 25-2-390 -A4 00046 14.10
UMA 28-1-230 -A4 00047 12.00 UMA 28-2-230 -A4 00047 12.30
UMA 28-1-260 -A4 00048 12.50 UMA 28-2-260 -A4 00048 12.85
UMA 28-1-290 -A4 00049 13.35 UMA 28-2-290 -A4 00049 13.70
UMA 28-1-320 -A4 00050 14.70 UMA 28-2-320 -A4 00050 15.00
UMA 28-1-350 -A4 00051 15.70 UMA 28-2-350 -A4 00051 16.00
Framing systems
UMA 28-1-380 -A4 00052 16.80 UMA 28-2-380 -A4 00052 17.20
UMA 28-1-410 -A4 00053 18.15 UMA 28-2-410 -A4 00053 18.55
6 UMA 28-1-440 -A4 00054 19.40 UMA 28-2-440 -A4 00054 19.90
UMA 28-1-470 -A4 00055 20.50 UMA 28-2-470 -A4 00055 20.90
UMA 28-1-500 -A4 00056 21.80 UMA 28-2-500 -A4 00056 22.15
UMA 33-1-230 -A4 00057 15.45 UMA 33-2-230 -A4 00057 15.80
UMA 33-1-260 -A4 00058 17.20 UMA 33-2-260 -A4 00058 17.60
UMA 33-1-290 -A4 00059 18.70 UMA 33-2-290 -A4 00059 19.15
UMA 33-1-320 -A4 00060 19.45 UMA 33-2-320 -A4 00060 19.95
UMA 33-1-350 -A4 00061 21.70 UMA 33-2-350 -A4 00061 22.25
Bolts, accessories
UMA 33-1-380 -A4 00062 23.15 UMA 33-2-380 -A4 00062 23.75
24.70 25.30
7 UMA 33-1-410 -A4
UMA 33-1-440 -A4
00063
00064 26.15
UMA 33-2-410 -A4
UMA 33-2-440 -A4
00063
00064 26.80
UMA 33-1-470 -A4 00065 27.45 UMA 33-2-470 -A4 00065 28.05
UMA 33-1-500 -A4 00066 28.70 UMA 33-2-500 -A4 00066 29.35
UMA 33-1-530 -A4 00067 30.00 UMA 33-2-530 -A4 00067 30.60
102
h a l f e n U M A n at u r a l s to n e g r o u t - i n a n c h o r

Design 3, with two loose pins Design 4
and two sliding sleeves with two half pins, pressed
Article no.
Article no.
1
Item name Price Item name Price
UMA 10-3-120 -A4 00001 5.55 UMA 10-4-120 -A4 00001 5.80
UMA 10-3-150 -A4 00002 5.80 UMA 10-4-150 -A4 00002 6.10
UMA 10-3-180 -A4 00003 5.95 UMA 10-4-180 -A4 00003 6.25
UMA 10-3-210 -A4 00004 6.10 UMA 10-4-210 -A4 00004 6.35
UMA 10-3-240 -A4 00005 6.30 UMA 10-4-240 -A4 00005 6.60
UMA 12-3-120 -A4 00006 6.05 UMA 12-4-120 -A4 00006 6.30
UMA 12-3-150 -A4 00007 5.95 UMA 12-4-150 -A4 00007 6.25
UMA 12-3-180 -A4 00008 6.30 UMA 12-4-180 -A4 00008 6.60 2
UMA 12-3-210 -A4 00009 7.00 UMA 12-4-210 -A4 00009 7.35
UMA 12-3-240 -A4 00010 7.35 UMA 12-4-240 -A4 00010 7.65
UMA 16-3-120 -A4 00068 7.90 UMA 16-4-120 -A4 00068 8.35
UMA 16-3-150 -A4 00069 8.15 UMA 16-4-150 -A4 00069 8.55
UMA 16-3-180 -A4 00070 8.40 UMA 16-4-180 -A4 00070 8.80
UMA 16-3-210 -A4 00071 8.75 UMA 16-4-210 -A4 00071 9.20
UMA 16-3-240 -A4 00072 8.90 UMA 16-4-240 -A4 00072 9.30
Lifting systems
UMA 16-3-270 -A4 00073 9.55 UMA 16-4-270 -A4 00073 10.05
UMA 18-3-120 -A4 00023 8.90 UMA 18-4-120 -A4 00023 9.30
UMA 18-3-150 -A4 00024 9.10 UMA 18-4-150 -A4 00024 9.55 3
UMA 18-3-180 -A4 00025 9.75 UMA 18-4-180 -A4 00025 10.25
UMA 18-3-210 -A4 00026 10.25 UMA 18-4-210 -A4 00026 10.70
UMA 18-3-240 -A4 00027 10.80 UMA 18-4-240 -A4 00027 11.40
UMA 18-3-270 -A4 00028 11.20 UMA 18-4-270 -A4 00028 11.80
UMA 18-3-300 -A4 00029 11.65 UMA 18-4-300 -A4 00029 12.25

UMA 18-3-330 -A4 00030 12.45 UMA 18-4-330 -A4 00030 13.10
UMA 18-3-360 -A4 00031 13.15 UMA 18-4-360 -A4 00031 13.80
UMA 22-3-180 -A4 00032 10.95 UMA 22-4-180 -A4 00032 11.50
UMA 22-3-210 -A4
UMA 22-3-240 -A4
00033
00034
11.90
12.35
UMA 22-4-210 -A4
UMA 22-4-240 -A4
00033
00034
12.45
13.00 4
UMA 22-3-270 -A4 00035 12.80 UMA 22-4-270 -A4 00035 13.40
UMA 22-3-300 -A4 00036 13.65 UMA 22-4-300 -A4 00036 14.35
UMA 22-3-330 -A4 00037 14.25 UMA 22-4-330 -A4 00037 15.00
UMA 22-3-360 -A4 00038 15.30 UMA 22-4-360 -A4 00038 16.05
UMA 22-3-390 -A4 00039 15.90 UMA 22-4-390 -A4 00039 16.70
UMA 25-3-210 -A4 00040 13.60 UMA 25-4-210 -A4 00040 14.25
UMA 25-3-240 -A4 00041 14.70 UMA 25-4-240 -A4 00041 15.45
UMA 25-3-270 -A4 00042 15.50 UMA 25-4-270 -A4 00042 16.30
DETAN
UMA 25-3-300 -A4
UMA 25-3-330 -A4
00043
00044
16.10
17.10
UMA 25-4-300 -A4
UMA 25-4-330 -A4
00043
00044
16.90
17.90 5
UMA 25-3-360 -A4 00045 17.70 UMA 25-4-360 -A4 00045 18.55
UMA 25-3-390 -A4 00046 18.75 UMA 25-4-390 -A4 00046 19.65
UMA 28-3-230 -A4 00047 17.25 UMA 28-4-230 -A4 00047 18.15
UMA 28-3-260 -A4 00048 17.75 UMA 28-4-260 -A4 00048 18.70
UMA 28-3-290 -A4 00049 18.55 UMA 28-4-290 -A4 00049 19.45
UMA 28-3-320 -A4 00050 19.90 UMA 28-4-320 -A4 00050 20.90
Framing systems
UMA 28-3-350 -A4 00051 20.90 UMA 28-4-350 -A4 00051 22.00
UMA 28-3-380 -A4 00052 21.85 UMA 28-4-380 -A4 00052 22.95
UMA 28-3-410 -A4
UMA 28-3-440 -A4
00053
00054
23.45
24.50
UMA 28-4-410 -A4
UMA 28-4-440 -A4
00053
00054
24.70
25.70
6
UMA 28-3-470 -A4 00055 25.60 UMA 28-4-470 -A4 00055 26.90
UMA 28-3-500 -A4 00056 26.80 UMA 28-4-500 -A4 00056 28.15
UMA 33-3-230 -A4 00057 20.50 UMA 33-4-230 -A4 00057 21.55
UMA 33-3-260 -A4 00058 22.30 UMA 33-4-260 -A4 00058 23.45
UMA 33-3-290 -A4 00059 23.75 UMA 33-4-290 -A4 00059 24.90
UMA 33-3-320 -A4 00060 24.50 UMA 33-4-320 -A4 00060 25.70
Bolts, accessories
UMA 33-3-350 -A4 00061 26.65 UMA 33-4-350 -A4 00061 28.00
UMA 33-3-380 -A4 00062 28.15 UMA 33-4-380 -A4 00062 29.60
UMA 33-3-410 -A4
UMA 33-3-440 -A4
00063
00064
29.60
31.05
UMA 33-4-410 -A4
UMA 33-4-440 -A4
00063
00064
31.05
32.65
7
UMA 33-3-470 -A4 00065 87.80 UMA 33-4-470 -A4 00065 92.20
UMA 33-3-500 -A4 00066 89.30 UMA 33-4-500 -A4 00066 93.75
UMA 33-3-530 -A4 00067 92.40 UMA 33-4-530 -A4 00067 97.00
103
h a l f e n U M A n at u r a l s to n e g r o u t - i n a n c h o r

Design 7, with L bracket, Design 8, threaded anchor with
two loose pins and two sliding sleeves countersunk screw and 2 x EPDM washer
1 Material: Stainless steel SS 316

UMA 10-7-120 -A4 00001 7.15 UMA 16-8-120 -A4 00001 6.35
UMA 10-7-150 -A4 00002 7.45 UMA 16-8-150 -A4 00002 6.65
UMA 10-7-180 -A4 00003 7.70 UMA 16-8-180 -A4 00003 9.00
UMA 10-7-210 -A4 00004 8.25 UMA 16-8-210 -A4 00004 10.10
UMA 10-7-240 -A4 00005 8.50 UMA 16-8-240 -A4 00005 12.35
UMA 12-7-120 -A4 00006 7.40 UMA 16-8-270 -A4 00006 12.70
UMA 12-7-150 -A4 00007 7.65 UMA 18-8-120 -A4 00007 11.35
2 UMA 12-7-180 -A4
UMA 12-7-210 -A4
00008
00009
7.95
12.75
UMA 18-8-150 -A4
UMA 18-8-180 -A4
00008
00009
9.25
9.85
UMA 12-7-240 -A4 00010 8.95 UMA 18-8-210 -A4 00010 10.10
UMA 16-7-120 -A4 00068 9.80 UMA 18-8-240 -A4 00011 11.20
UMA 16-7-150 -A4 00069 10.10 UMA 18-8-270 -A4 00012 11.95
UMA 16-7-180 -A4 00070 10.35 UMA 18-8-300 -A4 00013 12.15
UMA 16-7-210 -A4 00071 10.55 UMA 18-8-330 -A4 00014 12.35
UMA 16-7-240 -A4 00072 11.00 UMA 18-8-360 -A4 00015 12.70
Lifting systems
UMA 16-7-270 -A4 00073 11.20 UMA 22-8-180 -A4 00016 9.90
UMA 18-7-120 -A4 00023 10.10 UMA 22-8-210 -A4 00017 10.25
3 UMA 18-7-150 -A4 00024 10.65 UMA 22-8-240 -A4 00018 10.80
UMA 18-7-180 -A4 00025 11.20 UMA 22-8-270 -A4 00019 11.50
UMA 18-7-210 -A4 00026 11.55 UMA 22-8-300 -A4 00020 13.45
UMA 18-7-240 -A4 00027 12.00 UMA 22-8-330 -A4 00021 14.10
UMA 18-7-270 -A4 00028 12.35 UMA 22-8-360 -A4 00022 14.90
UMA 18-7-300 -A4 00029 12.80 UMA 22-8-390 -A4 00023 15.20
UMA 18-7-330 -A4 00030 13.25 UMA 25-8-210 -A4 00024 12.90
UMA 18-7-360 -A4 00031 13.65 UMA 25-8-240 -A4 00025 13.60
UMA 22-7-180 -A4 00032 20.80 UMA 25-8-270 -A4 00026 14.20
UMA 22-7-210 -A4 00033 21.30 UMA 25-8-300 -A4 00027 15.15
4 UMA 22-7-240 -A4 00034 22.25 UMA 25-8-330 -A4 00028 15.85
UMA 22-7-270 -A4 00035 22.65 UMA 25-8-360 -A4 00029 17.10
UMA 22-7-300 -A4 00036 23.15 UMA 25-8-390 -A4 00030 17.25
UMA 22-7-330 -A4 00037 24.25 UMA 28-8-230 -A4 00031
UMA 22-7-360 -A4 00038 25.00 UMA 28-8-260 -A4 00032
UMA 22-7-390 -A4 00039 25.80 UMA 28-8-290 -A4 00033
UMA 25-7-210 -A4 00040 UMA 28-8-320 -A4 00034
UMA 25-7-240 -A4 00041 UMA 28-8-350 -A4 00035
UMA 25-7-270 -A4 00042 UMA 28-8-380 -A4 00036
DETAN
UMA 25-7-300 -A4 00043 UMA 28-8-410 -A4 00037

5 UMA 25-7-330 -A4 00044 UMA 28-8-440 -A4 00038
UMA 25-7-360 -A4 00045 UMA 28-8-470 -A4 00039
UMA 25-7-390 -A4 00046 UMA 28-8-500 -A4 00040
UMA 28-7-230 -A4 00047 upon
UMA 33-8-230 -A4 00041
request
UMA 28-7-260 -A4 00048 UMA 33-8-260 -A4 00042
UMA 28-7-290 -A4 00049 UMA 33-8-290 -A4 00043
UMA 28-7-320 -A4 00050 UMA 33-8-320 -A4 00044
Framing systems
UMA 28-7-350 -A4 00051 UMA 33-8-350 -A4 00045

UMA 28-7-380 -A4 00052 UMA 33-8-380 -A4 00046
6 UMA 28-7-410 -A4
UMA 28-7-440 -A4
00053
00054
upon
request
UMA 33-8-410 -A4
UMA 33-8-440 -A4
00047
00048
UMA 28-7-470 -A4 00055 UMA 33-8-470 -A4 00049
UMA 28-7-500 -A4 00056 UMA 33-8-500 -A4 00050
UMA 33-7-230 -A4 00057 UMA 33-8-530 -A4 00051
UMA 33-7-260 -A4 00058
UMA 33-7-290 -A4 00059
UMA 33-7-320 -A4 00060
Bolts, accessories
UMA 33-7-350 -A4 00061

UMA 33-7-380 -A4 00062
7 UMA 33-7-410 -A4 00063
UMA 33-7-440 -A4 00064
UMA 33-7-470 -A4 00065
UMA 33-7-500 -A4 00066
UMA 33-7-530 -A4 00067
104
h a l f e n UHA n at u r a l s to n e g r o u t - i n a n c h o r
HALFEN UHA g r o u t - i n a n c h o r HALFEN UHA g r o u t - i n a n c h o r

Restraint tie Restraint tie
Design 1, with one loose pin Design 2, with one half
and one sliding sleeve pin, pressed
1
UHA 5-1-120 -A4 00001 1.15 UHA 5-2-120 -A4 00001 1.15
UHA 5-1-150 -A4 00002 1.20 UHA 5-2-150 -A4 00002 1.20
UHA 5-1-180 -A4 00003 1.30 UHA 5-2-180 -A4 00003 1.35
UHA 5-1-210 -A4 00004 1.40 UHA 5-2-210 -A4 00004 1.45
UHA 5-1-240 -A4 00005 1.60 UHA 5-2-240 -A4 00005 1.60
UHA 5-1-270 -A4 00006 1.70 UHA 5-2-270 -A4 00006 1.70
UHA 5-1-300 -A4 00007 1.90 UHA 5-2-300 -A4 00007 1.85
UHA 7-1-180 -A4 00008 1.85 UHA 7-2-180 -A4 00008 2.15 2
UHA 7-1-210 -A4 00009 1.95 UHA 7-2-210 -A4 00009 2.25
UHA 7-1-240 -A4 00010 2.15 UHA 7-2-240 -A4 00010 2.40
UHA 7-1-270 -A4 00011 2.35 UHA 7-2-270 -A4 00011 2.65
UHA 7-1-300 -A4 00012 2.50 UHA 7-2-300 -A4 00012 2.75
UHA 7-1-330 -A4 00013 2.80 UHA 7-2-330 -A4 00013 3.10
UHA 7-1-360 -A4 00014 3.20 UHA 7-2-360 -A4 00014 3.50
UHA 10-1-270 -A4 00015 3.80 UHA 10-2-270 -A4 00015 3.85
Lifting systems
UHA 10-1-300 -A4 00016 4.00 UHA 10-2-300 -A4 00016 4.05
UHA 10-1-330 -A4
UHA 10-1-360 -A4
00017
00018
4.85
4.80
UHA 10-2-330 -A4
UHA 10-2-360 -A4
00017
00018
4.95
4.90 3
UHA 10-1-390 -A4 00019 4.90 UHA 10-2-390 -A4 00019 5.00
HALFEN UHA g r o u t - i n a n c h o r
Restraint tie

Design 8 threaded anchor with coun-
tersunk screw and 2x EPDM washer
Ø L 0184.000- [EUR/item] 4
UHA 10-8-120 -A4 00001 4.45
UHA 10-8-150 -A4 00002 5.90
UHA 10-8-180 -A4 00003 6.75
UHA 10-8-210 -A4 00004 6.55
UHA 10-8-240 -A4 00005 6.90
UHA 10-8-270 -A4 00006 7.70
UHA 10-8-300 -A4 00007 8.10
UHA 10-8-330 -A4 00008
upon
DETAN
UHA 10-8-360 -A4 00009
UHA 10-8-390 -A4 00010
request
5
Framing systems
6
Bolts, accessories
105
h a l f e n n at u r a l s to n e a n c h o r ac c e s s o r i e s
h a l f e n s o f f i t b r a c ke t p i n s a n d s l i d i n g s l e e ve s
Material: nas D nas G

Stainless steel SS 316 Pin, loose sliding sleeve
nas-lW t nas-lW h sliding sleeve Material: Stainless steel SS 316 Material: plastic
1
Support bracket Retaining bracket plastic
nas-lW J-1 nas-lW J-2 nas-lW-1 nas-lW-2

Soffit bracket Soffit bracket Corner bracket Corner bracket Item name Article no. Price
Item name Article no. Price 0225.000- [EUR/item]
0232. [EUR/item] NAS D- 5x70 with collar -A4 00001 0.30
NAS LW T -A4 050-00001 8.10 NAS D- 6x75 with collar -A4 00002 0.45
NAS LW H -A4 060-00001 5.70 NAS D- 5x70B knurled -A4 00003 0.35
NAS LW J-1 -A4 020-00001 5.70 NAS D- 6x75B knurled -A4 00004 0.45
2 NAS LW J-2 -A4 020-00002 6.55 0226.000-
NAS LW 1 -A4 010-00001 3.50 NAS G- 5 -KS 00001 0.05
NAS LW 2 -A4 010-00002 4.35 NAS G- 6 -KS 00002 0.05
connections to concrete scaffold anchor and accessories

Pin HB bolt anchor
officially approved Dimensions
Material: Stainless steel SS 316 (horizontal cross-section)
for grouting in:
lifting systems
Ge hB
alternatively: for horizontal joints
3 HTA HALFEN cast-in channels
and HALFEN bolts Ge VB
officially approved for vertical joints
Material: Stainless steel SS 316 (→ page 10)
for bolting:
Item name Article no. Price hGa f Connection Embedment
0432.040- [EUR/100 items] for horizontal joints
HB - BZ 8 - 10/ 75 A4 00001 372.20

Material: Stainless steel SS 316 Blanking plug,
HB - BZ 8 - 50/ 115 A4 00002 457.30 Plastics Ge Kap
HB - BZ 10 - 10/ 90 A4 00003 493.10
4 HB - BZ
HB - BZ
10 - 50/
12 - 15/
130 A4
110 A4
00004
00005
707.65
785.90
HB - BZ 12 - 50/ 145 A4 00006 986.80
HB - BZ 16 - 25/ 145 A4 00007 1,556.05 Item name Article no. Price
HB - BZ 16 - 50/ 170 A4 00008 1,681.70 0765.010 [EUR/item]
GE HB-135 -A4 00001 14.45
hcB concrete screw GE HB-150 -A4 00002 15.15
→ pages 163 - 164 GE HB-165 -A4 00003 15.70
GE HB-180 -A4 00004 16.40
Detan
GE HB-195 -A4 00005 17.20

5 GE HB-210 -A4 00006 17.35
GE HB-225 -A4 00007 18.00
GE HB-240 -A4 00008 18.60
GE HB-255 -A4 00009 21.20
0436.010- [EUR/100 items]
GE HB-270 -A4 00010 21.60
HCB-WH 10x 95- A4 00001 738,10
GE HB-285 -A4 00011 21.60
GE HB-300 -A4 00012 24.45
h a l f e n s o f c o ve r a n c h o r
GE HB-315 -A4 00013 24.90
framing systems
Material: Stainless steel SS 316 GE HB-330 -A4 00014 26.25
6 GE VB-200 -A4
0765.020
00001 32.05
GE VB-220 -A4 00002 32.75
GE VB-240 -A4 00003 33.80
GE VB-260 -A4 00004 37.95
Item name Article no. Price GE VB-280 -A4 00005 39.00
0192.010- [EUR/item] GE VB-300 -A4 00006 40.60
SOF 805-A4 00009 20.20 GE VB-320 -A4 00007 41.60
Bolts, accessories
SOF 806-A4 00010 20.40 0233.010

SOF 807-A4 00011 21.05 HGA F-110-A4 00001 28.00
7 SOF 808-A4 00012 20.75 HGA F-140-A4 00002 32.45
SOF 810-A4 00013 22.10 0765.030
SOF 813-A4 00014 22.65 GE KAP-01 black 00001 0.25
SOF 816-A4 00015 23.35 GE KAP-02 transparent 00002 0.25
SOF 819-A4 00016 23.25 GE KAP-03 light grey 00003 0.25
106
detan tension rod systems

Features Benefits
1
▪ Large range of rods and Makes long spreads pos-
accessories such as couplers and sible and limits bending
anchor disks
High level of corrosion pro-
▪ Threads can be sealed
tection for thread areas
▪ Small efficient fork ends
Minimum weight
2
DETAN tension rod
Lifting systems
3
Features Benefits
No turnbuckles needed –
▪ Left- and right-hand threads for

aesthetic design
length adjustment and simple
tensioning Protection from the ingress
4
▪ Threaded plugs supplied of moisture and dirt
and sealing system for
diameters of 16 mm and greater
Safe and visually pleasing
▪ Supplied with lock nuts as standard
DETAN fork end
detan
5
Framing systems
▪ High-strength steel Minimum material, mini-
mum cost, minimum weight
▪ Officially approved
▪ Large range of products Safety
Bolts, accessories
available
The right product for
7
every situation
DETAN product range
107
d e ta n t e n s i o n r o d s y s t e m s
DETAN - S 4 6 0 , g a l v a n i s e d ( 1 )
• DETAN-S460 tension rod set

consists of:
- 1 tension rod with one left- and one right-hand thread
1 - 2 fork ends (1 x left, 1 x right) consists of

fork, pin, circlips and locking nut
Material/version: FV
System length L
• Tension rod: hot-dip galvanised, S460 for Ø 16 - 95, S355 for Ø 6 - 12
• Fork end: Dacromet coated
System Ø dS 6 8 10 12 16 20 24 27 30 Contin.
Load [kN] 7.5 13.6 21.5 31.3 71 111 160 209 255
Price: [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item]
Article no.: 0802.010-
System length L [mm] 1000 54.35 56.00 58.90 66.90 77.05 88.85 102.90 122.05 →
2 2000
Ø 6 can
only be 56.45 58.65 62.75 73.45 87.00 103.15 120.80 144.35 →
3000 supplied in 58.60 61.25 66.40 79.95 96.85 117.30 138.65 166.40 →
4000 the WB 60.65 63.85 70.20 86.40 106.70 131.40 156.60 188.45 →
5000 version 62.75 66.40 73.95 92.90 116.55 145.60 174.50 210.55 →
(mill finish
6000 64.75 69.00 77.75 99.40 126.45 159.75 192.40 232.60 →
tension rod,
7000 – – – 105.85 136.30 173.90 210.35 254.65 →
fork ends
8000 Dacromet – – – 112.35 146.15 188.10 228.25 276.70 →
9000 coated). – – – 118.85 156.00 202.15 246.15 288.80 →
Lifting systems
10000 For prices, – – – 125.35 165.85 216.30 264.00 320.95 →

see page
3 11000
12000
110.
–
–
–
–
–
–
131.85
138.35
175.80
185.65
230.45
244.65
281.95
299.90
342.90
365.00
→
→
Min.: 139 155 189 237 267 327 384 416 446 →
Max.: 3044 6051 6060 6073 12085 12107 12128 12140 12148 →
Longer system lengths L consisting of several A double coating that is applied in the cold immersion or spraying procedure. In the salt spray misting test,
rods with couplers are possible! it achieves a level of corrosion resistance at least equal to that of hot-dip galvanising.
DETAN - S 4 6 0 , a c c e s s o r i e s , g a l v a n i s e d ( 1 )
• Complete end fork, left-hand thread, • Anchor disc • Coupler with / without lug
with 4 holes
4 • Complete end fork, right-hand thread
(both consisting of fork, pin, please specify angle of
complete with 2 locking nut
(one with a left-hand and one
circlips and locking nut) holes when with a right-hand thread)
ordering
lug
DETAN
5 FV = Dacromet coated
System Ø dS 6 8 10 12 16 20 24 27 30 Contin.
Complete end fork, left Complete end fork, left-hand thread →
Article no.: 0810.030- 00101 00102 00103 00104 00105 00106 00107 00108 00109 →
Price [EUR/item] 17.30 17.75 18.25 18.95 19.60 22.60 26.65 31.80 39.55 →
Complete end fork, right Complete end fork, right-hand thread →
Framing systems
Article no.: 0810.040- 00101 00102 00103 00104 00105 00106 00107 00108 00109 →
6 Coupler with lug

Price [EUR/item] 17.30 17.75 18.25 18.95 19.60
Coupler with lug
22.60 26.65 31.80 39.55 →
→
Article no.: 0816.030- 00004 00005 00006 00007 00008 00009 →
– – –
Price [EUR/item] 24.75 31.35 36.30 44.15 51.65 67.55 →
Coupler without lug Coupler without lug →
Article no.: 0816.040- 00001 00002 00003 00004 00005 00006 00007 00008 00009 →
Price [EUR/item] 11.65 12.75 13.75 24.75 31.35 36.30 44.15 51.65 67.55 →
Anchor disc Anchor disc with 4 holes →
Bolts, accessories
Article no.: 0815.020- →

Price [EUR/item] 19.05 24.65 25.50 32.55 44.25 65.00 85.45 115.65 137.30 →
7 Øf [mm] 55 75 90 110 140 180 210 240 260 →
108
DETAN - S 4 6 0 , g a l v a n i s e d ( 2 )

consists of:
- 2 fork ends (1 x left, 1 x right) consists of
1
Material/version: FV System length L
• Tension rod: hot-dip galvanised, S460 for Ø 16 - 95, S355 for Ø 6 - 12
System Ø dS 36 42 48 52 56 60 64 76 85 95
Load [kN] 371 510 670 799 923 1074 1216 1725 2157 2695
Price: [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item]
System length L [mm] 1000 155.60 222.95 304.50 397.90 514.55 656.65
2000 187.45 264.25 354.80 456.90 582.00 734.90 2
3000 219.00 305.50 404.65 515.25 649.50 812.40
4000 250.60 346.70 545.50 573.65 717.00 889.80
Price and Price and Price and Price and
5000 282.05 388.05 504.35 632.10 784.50 967.35 delivery delivery delivery delivery
6000 313.65 429.30 554.10 690.45 851.95 1,044.75 details details details details
7000 345.10 470.55 603.95 748.85 919.40 1,122.30 available available available available
8000 376.70 511.85 653.80 807.25 986.95 1,199.80 upon upon upon upon
request request request request
9000 408.25 553.05 703.65 865.65 1,054.40 1,277.20
Lifting systems
10000 439.75 594.40 753.50 924.05 1,121.85 1,354.75
11000
12000
471.30
502.80
634.60
676.85
803.30
853.10
982.45
1,040.80
1,189.40
1,256.85
1,432.15
1,509.70 3
Min.: 513 586 666 713 760 828 886 1042 1152 1272
Max.: 12179 12220 12264 12277 12290 12324 15356 15432 15482 15532
Longer system lengths L consisting of several A double coating that is applied in the cold immersion or spraying procedure. In the salt spray misting test,
rods with couplers are possible! it achieves a level of corrosion resistance at least equal to that of hot-dip galvanising.

DETAN - S 4 6 0 , a c c e s s o r i e s , g a l v a n i s e d ( 2 )
• Complete end fork, left-hand thread, • Anchor disc • Coupler with/without lug complete with
with 4 holes
• Complete end fork, right-hand thread
(both consisting of fork, pin, please specify angle of holes
2 locking nuts (one with a left-hand and one
with a right-hand thread) 4
circlips and locking nut) at the time of order
lug
DETAN
Version: FV = Dacromet coated 5
System Ø dS 36 42 48 52 56 60 64 76 85 95
Complete end fork, left Complete end fork, left-hand thread
Article no.: 0810.030- 00010 00011 00012 00013 00014 00015 00016 00017 00018 00019
Price [EUR/item] 52.45 82.45 120.45 163.55 218.00 286.00 upon request
Complete end fork, right Complete end fork, right-hand thread
Framing systems
Article no.: 0810.040- 00010 00011 00012 00013 00014 00015 00016 00017 00018 00019
Coupler with lug Coupler with lug 6
Article no.: 0816.030- 00010 00011 00012 00013 00014 00015 00016 00017 00018 00019
Coupler without lug Coupler without lug
Article no.: 0816.040- 00010 00011 00012 00013 00014 00015 00016 00017 00018 00019
Anchor disc Anchor disc with 4 holes
Bolts, accessories
Øf [mm] 310 360 420 450 490 520 596 702 777 832
7
109
DETAN - S 4 6 0 , m i l l f i n i s h

consists of:
1 - 2 fork ends (1 x left, 1 x right) consisting of

Material/version: WB System length L
• Tension rod: mill finish, S460 for Ø 16 - 95, S355 for Ø 6 - 12
System Ø dS 6 8 10 12 16 20 24 27 30 Continued below
Load [kN] 7.5 13.6 21.5 31.3 71 111 160 209 255
System length L [mm] 1000 51.70 53.52 54.70 57.00 63.35 71.50 81.40 93.50 110.70 ↓
2 2000 52.25 54.20 55.85 58.70 65.90 75.15 87.05 100.55 119.45 ↓
3000 52.75 55.10 57.05 60.35 68.55 78.80 92.60 107.45 128.15 ↓
4000 – 56.00 58.20 62.05 71.15 82.45 98.20 114.50 136.85 ↓
5000 – 56.90 59.45 63.70 73.75 86.05 103.85 121.50 145.60 ↓
6000 – 57.90 60.55 65.40 76.30 89.75 109.40 128.55 154.25 ↓
7000 – – – – 78.90 93.30 114.95 135.55 162.95 ↓
8000 – – – – 81.55 96.95 120.50 142.50 171.70 ↓
9000 – – – – 84.15 100.60 126.10 149.55 180.30 ↓
Lifting systems
10000 – – – – 86.70 104.20 131.75 156.55 189.05 ↓
3 11000
12000
–
–
–
–
–
–
–
–
89.30
90.90
107.90
111.50
137.30
142.85
163.60
170.60
197.70
206.40
↓
↓
Min.: 139 155 189 237 267 327 384 416 446 ↓
Max.: 3044 6051 6060 6073 12085 12107 12128 12140 12148 ↓
System Ø dS 36 42 48 52 56 60 64 76 85 95
Load [kN] 371 510 670 799 923 1074 1216 1725 2157 2695
Price: [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item] [EUR/item]
System length L [mm] 1000 140.00 202.60 281.55 371.30 484.45 624.05
4 2000
3000
152.60
165.00
217.80
233.00
300.15
318.60
393.10
414.60
509.50
534.50
653.15
681.95
4000 177.50 248.15 337.05 436.95 559.55 710.75
Price and Price and Price and
5000 189.95 263.30 355.45 457.75 584.65 739.60 Price and
delivery delivery delivery
delivery
6000 202.40 278.55 373.85 479.25 609.70 768.40 details details details
details
7000 214.90 293.65 392.35 500.80 634.70 797.20 available available available
available upon
8000 227.30 308.90 410.70 522.35 659.75 826.00 upon upon upon
request
request request request
9000 239.80 324.10 429.20 543.95 684.80 854.75
10000 252.25 339.25 447.60 565.45 709.90 883.65
DETAN
11000 264.65 354.45 466.00 586.95 734.90 912.45

5 12000 277.15 369.60 484.45 608.55 759.95 941.25
Min.: 513 586 666 713 760 828 886 1042 1152 1272
Max.: 12179 12220 12264 12277 12290 12324 15356 15432 15482 15532
Longer system lengths L consisting of A double coating that is applied in the cold immersion or spraying procedure. In the salt spray misting test,
several rods with couplers are possible! it achieves a level of corrosion resistance at least equal to that of hot-dip galvanising.
Note: For associated accessories, see version FV, pages 108 - 109.
Price calculation
Framing systems
Sample calculation:
6 Product:
DETAN-S460 tension rod set Ø dS = 16 - hot-dip galvanised
Sought: System length L

Price x = ?
for required length Lx = 4750 mm (system length).
Price 2 - price 1 System Ø dS 12 16

Price x = x ( length Lx - length L1) + price 1
Length L2 - length L1 Length L1 [EUR/item] [EUR/item] Price 1
Bolts, accessories
System length L [mm] 4000 70.20 86.40

Length Lx Price x
92.90 - 86.40 5000 73.95 92.90
7 =
5000 - 4000
x (4750 - 4000) + 86.40
Length L2 6000 77.75 Price 2
Extract from price list
= 0.005 x 750 + 86.40
= EUR 91.28/tension rod set
110
DETAN - E , s t a i n l e s s s t e e l

• DETAN-E tension rod set
consists of:
- 2 fork ends (1 x left, 1 x right) consisting of
1
Material/version: SS316
System length L
Strength class S355, polished
System Ø ds 6 8 10 12 16 20 24 27 30
Load [kN] 7.5 13.6 21.5 31.3 71 111 160 209 255
System length L [mm] 1000 115.35 102.50 127.95 157.30 190.10 255.80 356.90 415.30 509.45
2000 121.90 111.20 139.20 171.80 212.25 287.80 402.40 471.70 578.25 2
3000 128.35 119.75 150.40 186.05 234.20 319.50 447.40 527.50 646.40
4000 – 128.30 161.50 200.35 256.15 351.15 492.40 583.25 714.50
5000 – 136.85 172.70 214.60 278.05 382.80 537.50 639.05 782.65
6000 – 145.50 183.85 228.85 300.00 414.45 582.50 694.85 850.80
Min.: 139 155 189 237 267 327 384 416 446
Max.: 3044 6051 6060 6073 6085 6107 6128 6140 6148
Longer system lengths L consisting of several rods with couplers are possible!
Lifting systems
Note: stainless steel SS316 hand polished, upon request
3
DETAN - E a c c e s s o r i e s , s t a i n l e s s s t e e l
• Complete end fork, left-hand thread, • Anchor disc • Coupler with/without lug
• Complete end fork, right-hand thread with 4 holes complete with 2 locking nut
(both consisting of fork, pin, please specify angle of holes (one with a left-hand and one
circlips and locking nut) at the time of order with a right-hand thread)

lug
Material/version: stainless steel SS316, polished
System Ø dS 6 8 10 12 16 20 24 27 30
Complete end fork left Complete end fork, left-hand thread
Article no.: 0810.010- 00002 00005 00008 00011 00014 00017 00020 00023 00026
DETAN
Price [EUR/item]
Complete end fork right
46.15 38.80 50.20 63.15 73.85 101.45
Complete end fork, right-hand thread
145.60 169.50 210.65
5
Article no.: 0810.020- 00002 00005 00008 00011 00014 00017 00020 00023 00026
Price [EUR/item] 46.15 38.80 50.20 63.15 73.85 101.45 145.60 169.50 210.65
Coupler with lug Coupler with lug
Article no.: 0816.010- 00014 00017 00020 00023 00026
– – – –
Price [EUR/item] 68.80 116.40 123.55 122.10 139.60
Coupler without lug Coupler without lug
Framing systems
Article no.: 0816.020- 00002 00005 00008 00011 00014 00017 00020 00023 00026
Price [EUR/item] 29.85 32.05 38.80 45.40 53.30 65.90 94.20 110.80 126.50
Anchor disc Anchor disc with 4 holes 6
Price [EUR/item] 30.35 38.00 44.70 71.90 131.75 243.10 297.30 349.30 415.50
Øf [mm] 55 75 90 110 140 180 210 240 260
Bolts, accessories
111
H o W to o r d e r d e ta n
Inquiery Order Purchase order date:
Customer Number: Retailer:
1 Customer’s address: Delivery address:

Phone: Fax: Mobile number:
Contact person: Planned construction:

2
1. detan tension rod system (same for each DETAN order) 9 - -
2. material: steel: DETAN S 460 5 → 9 5 - -

stainless steel: DETAN-E 7 → 9 7 - -
3. size: system Ø ds
Lifting systems
e.g.: -steel, -system Ø ds = 12mm 9 5 1 2 - - 9 - -

3 4. a) Complete system structures
system length Ls from fork connector to fork connector
complete: 9 - 0 0 0 -
Complete system struc-
tures with couplers
complete with one socket: 9 - 7 1 1 -
arranged asymmetri-
cally: please specify

complete with one socket 9 - 7 0 1 -
the position within
the with lug:
system length (calibra-
ted draft). Example: Complete system structure: ·steel, ·system Ø ds=12mm, ·with 3 sockets ·hot dip galvanisedzinkt Socket finish
4 9 5 1 2 - 7 1 3 - 3 Number of sockets/sockets with lug
b) Single components further please indicate in remarks the

→ see on page 5 anchor disc perforation 0-8 holes with 9 - 0 6 1 -
or upon request specification of degrees
5. Finish steel: rod black (wb) 9 - - 1

other component geomet-coated
rod hot dip galvanised 9 - - 3
detan
5 stainless steel: polished 9 - - 5
hand polished 9 - - 6
Pos. order number Pieces system length [mm] remarks:
1 - -
Framing systems
2 - -
6
3 - -
4 - -
5 - -
Bolts, accessories
6 - -
7 7 - -
All deliveries are made in accordance with our ‘General terms and conditions of business’. Signature
112
framing systems – framing channels

Features Benefits
▪ General toothed channel High longitudinal loads

1
profiles with easy adjustment
▪ High-speed bolted connections Fast multiple connections
▪ Can be supplied in stainless steel High level of resistance
and hot-dip galvanised versions to corrosion
2
HALFEN HZM channel
with HALFEN HZS bolt
lifting systems
3
Features Benefits

▪ HALFEN hot-rolled sections have Hot-rolled channels
reduced stress and are easily welded are well suited to dynamic
4
loading
▪ Extensive load data
Reliable design for many
▪ Connections to any position Hot rolled HALFEN
channel and HALFEN
applications
in the channel
bolt
Precise adjustment with
DeTan
loads in any position
5
framing systems
▪ Sliding or fixed connections Easy to adjust and
available install
▪ Available in galvanised, zinc-plated, Sliding connections allow

Bolts, accessories
hot-dip galvanised and several stainless differential movement

steel grates when required 7
Light duty HALFEN channels Optimum corrosion pro-
and accessories tection is guaranteed
113
113
halfen framing channels
H e av y d u t y f r a m i n g s y s t e m s , h o t - r o l l e d c h a n n e l s H e av y d u t y f r a m i n g s y s t e m s
HM 72/48 HM 50/40,
HM 52/34 HM 50/40 (perforated)

HM 50/30
HM 40/22 HM 49/30 HM 486 HM 40/25
2
Item name Article no. Price Price Cut l. supp. Item name Article no. Price Price Cut l. supp.
[EUR/ per metre [EUR/ [EUR/ per metre [EUR/
Length [mm] Length [mm]
item] [EUR/m] item] item] [EUR/m] item]
WB = mill finish WB = mill finish
HM 72/48 - WB - 6070 0280.180-00002 230.40 HM 50/40 - WB - 6000 0280.090-00002 70.55
HM 72/48 - WB - FIXLÄ 37.96 10.25 HM 50/40 - WB - FIXLÄ 11.76 6.45
Lifting systems
HM 52/34 - WB - 6070 0280.190-00002 130.10 HL 50/40 - WB - 6000 0281.100-00001 76.80

3 HM 52/34 - WB - FIXLÄ 21.43 10.25 HL 50/40 - WB - FIXLÄ 12.80 6.45
HM 50/30 - WB - 6070 0280.200-00002 87.40 HM 49/30 - WB - 6070 0280.220-00001 59.65

HM 40/22 - WB - 6070 0280.210-00002 59.10 HM 486 - WB - 6000 0280.100-00001 54.50

HM 40/22 - WB - FIXLÄ 9.74 4.05 9.08
FV = hot-dip galvanised HM 40/25 - WB - 6070 0280.230-00001 42.60
4 HM 72/48 - FV - 6070
HM 72/48 - FV - FIXLÄ
0280.180-00003 343.20
56.54 10.25
HM 40/25 - WB - FIXLÄ
7.02 4.05
HM 50/40 - FV - 6000 0280.090-00003 124.15

HM 52/34 - FV - 6070 0280.190-00003 196.90 HM 50/40 - FV - FIXLÄ 20.69 6.45
HM 52/34 - FV - FIXLÄ 32,44 10.25
HL 50/40 - FV - 6000 0281.100-00002 130.50
HM 50/30 - FV - 6070 0280.200-00003 137.70 HL 50/40 - FV - FIXLÄ 21.75 6.45
HM 50/30 - FV - FIXLÄ 22.69 6.45
HM 49/30 - FV - 6070 0280.220-00002 103.90
HM 40/22 - FV - 6070 0280.210-00003 90.90 HM 49/30 - FV - FIXLÄ 17.12 4.05
DETAN
5 HM 40/22 - FV - FIXLÄ 14.98 4.05

HM 486 - FV - 6000 0280.100-00002 86.40
SS 316 = stainless steel 14.40
HM 72/48 - A4 - 6070 0280.180-00001 1,981.85
HM 72/48 - A4 - FIXLÄ 326.50 20.85 HM 40/25 - FV - 6070 0280.230-00002 72.80
HM 40/25 - FV - FIXLÄ 11.99 4.05
HM 52/34 - A4 - 6070 0280.190-00001 1,135.35 SS 304 = stainless steel
HM 52/34 - A4 - FIXLÄ 187.04 11.75 HM 49/30 - A2 - 6070 0280.220-00003 407.80
Framing systems
HM 49/30 - A2 - FIXLÄ 67.18 6.45

HM 50/30 - A4 - 6070 0280.200-00001 881.55
6 HM 50/30 - A4 - FIXLÄ 145.23 8.30 HM 40/25 - A2 - 6070 0280.230-00003 269.15
HM 40/25 - A2 - FIXLÄ 44.34 6.45
HM 40/22 - A4 - 6070 0280.210-00001 522.20 SS 316 = stainless steel
HM 40/22 - A4 - FIXLÄ 86.03 6.45 HM 50/40 - A4 - 6000 0280.090-00001 633.30
For associated HALFEN bolts, see page 136 -138. HM 50/40 - A4 - FIXLÄ 105.55 8.30
See page 117.
Can also be supplied in stainless steel, HL 50/40 - A4 - 6000 0281.100-00003 648.80
Bolts, accessories
material HCR 1.4547/1.4529 upon request. HL 50/40 - A4 - FIXLÄ 108.13 8.30
7 HM 49/30 - A4 - 6070
HM 49/30 - A4 - FIXLÄ
0280.220-00004 520.65
85.77 6.45
HM 40/25 - A4 - 6070 0280.230-00004 350.90

HM 40/25 - A4 - FIXLÄ 57.81 6.45
114
M e d i u m d u t y f r a m i n g s y s t e m s 41 M e d i u m d u t y f r a m i n g s y s t e m s 41

1
HM 41/22 plain back HM 41/22 D

HM 41/41 plain back Back to back
HL 41/22 slotted
HL 41/41 slotted welded channels
HM 41/41 D HZM 41/22 toothed
HZM 41/41 toothed HZM 41/22 D
Back to back HZL 41/22 slotted + toothed Back to back
HZL 41/41 slotted + toothed
welded channels,
welded channels
toothed 2
[EUR/ per metre [EUR/ per metre
Length [mm] [EUR/item] Length [mm] [EUR/item]
item] [EUR/m] item] [EUR/m]
WB = mill finish WB = mill finish
HM 41/41 - WB - 6000 0280.080-00001 52.05 HM 41/22 - WB - 6000 0280.120-00001 33.75
Lifting systems
HL 41/41 - WB - 6000 0281.010-00001 56.70 HL 41/22 - WB - 6000 0281.020-00001 38.25
HL 41/41 - WB - FIXLÄ 9.45 4.05 HL 41/22 - WB - FIXLÄ 6.38 4.05
3
HZM 41/41 - WB - 6000 0284.010-00001 91.90 HZM 41/22 - WB - 6070 0284.020-00001 68.75
HZM 41/41 - WB -FIXLÄ 15.32 4.05 HZM 41/22 - WB -FIXLÄ 11.46 4.05
HM 41/41 D - WB - 6000 0280.150-00001 120.90 HM 41/22 D - WB - 6000 0280.160-00001 84.00

HM 41/41 D-WB-FIXLÄ 20.15 8.00 HM 41/22 D-WB-FIXLÄ 14.00 8.00

SV = pre-galvanised SV = pre-galvanised
HM 41/41 - SV - 6000 0280.080-00002 67.55 HM 41/22 - SV - 6000 0280.120-00003 43.95
HM 41/41 - SV - FIXLÄ 11.26 4.05 HM 41/22 - SV - FIXLÄ 7.33 4.05
HL 41/41 - SV - 6000 0281.010-00003 71.80 HL 41/22 - SV - 6000 0281.020-00003 48.55 4

HL 41/41 - SV - FIXLÄ 11.97 4.05 HL 41/22 - SV - FIXLÄ 8.09 4.05
HM 41/41 - FV - 6000 0280.080-00003 88.05 HM 41/22 - FV - 6000 0280.120-00002 59.45
HM 41/41 - FV - FIXLÄ 14.68 4.05 HM 41/22 - FV - FIXLÄ 9.91 4.05
HL 41/41 - FV - 6000 0281.010-00002 92.50 HL 41/22 - FV - 6000 0281.020-00002 63.85

HL 41/41 - FV - FIXLÄ 15.42 4.05 HL 41/22 - FV - FIXLÄ 10.64 4.05
DETAN
HZM 41/41 - FV - 6000
HZM 41/41 - FV - FIXLÄ
0284.010-00002 125.35
20.89 4.05
HZM 41/22 - FV - 6070
0284.020-00002 103.35
17.03 4.05
5
HZL 41/22 - FV - 6000 0283.020-00002 107.30
HZL 41/41 - FV - 6000 0283.010-00002 129.00 HZL 41/22 - FV - FIXLÄ 17.88 4.05
HZL 41/41 - FV - FIXLÄ 21.50 4.05
HM 41/22 D - FV - 6000 0280.160-00002 135.25
HM 41/41 D - FV - 6000 0280.150-00003 192.50 HM 41/22 D - FV -FIXLÄ 22.54 8.00
HM 41/41 D - FV -FIXLÄ 32.08 8.00 HZM 41/22 D - FV - 6070 0284.040-00002 220.90
Framing systems
SS 316 = stainless steel HZM 41/22 D-FV-FIXLÄ 36.36 8.00

HM 41/41 - A4 - 6000 0280.080-00004 463.10 SS 316 = stainless steel
HM 41/41 - A4 - FIXLÄ 77.18 6.45 HM 41/22 - A4 - 6000
HM 41/22 - A4 - FIXLÄ
0280.120-00004 332.95
55.49 6.45
6
HL 41/41 - A4 - 6000 0281.010-00004 478.65
HL 41/41 - A4 - FIXLÄ 79.78 6.45 HL 41/22 - A4 - 6000 0281.020-00004 345.10
HL 41/22 - A4 - FIXLÄ 57.52 6.45
HZM 41/41 - A4 - 6000 0284.010-00003 510.55
HZM 41/41 - A4 - FIXLÄ 85.09 6.45 HZM 41/22 - A4 - 6070 0284.020-00003 413.65
HZM 41/22 - A4 - FIXLÄ 68.94 6.45
Bolts, accessories
HZL 41/41 - A4 - 6000 0283.010-00003 521.65 HZL 41/22 - A4 - 6000 0283.020-00003 425.65
HZL 41/41 - A4 - FIXLÄ 86.49 6.45 HZL 41/22 - A4 - FIXLÄ 70.94 6.45
7
HM 41/41 D - A4 - 6000 0280.150-00002 952.55 HM 41/22 D - A4 - 6000 0280.160-00003 690.95
HM 41/41 D - A4 -FIXLÄ 158.76 12.90 HM 41/22 D - A4 -FIXLÄ 115.16 12.90
See page 117; HALFEN bolts see pages 137, 140 - 141. HZM 41/22 D - A4 - 6070 0284.040-00003 842.75
HZM 41/22 D-A4-FIXLÄ 138.84 12.90
115
M e d i u m d u t y f r a m i n g s y s t e m s 41 M e d i u m d u t y f r a m i n g s y s t e m s 41
1
HLL 41/41 slotted

HM 41/62 D
HLL 41/22 slotted
HM 41/83 plain back Back to back
2 HL 41/83 slotted
HM 41/62 plain back
welded
channels
HL 41/62 slotted

Length [mm] [EUR/item]
SV = pre-galvanised
HLL 41/41 - SV - 6000 0282.010-00002 44.90
Lifting systems
3 Item name
Length [mm]
Article no. Price
[EUR/item]
HLL 41/22 - SV - 6000
0282.020-00003
6.70 EUR/metre
40.20
WB = mill finish For associated HALFEN bolts, see pages 137, 140 - 141.
HM 41/83 - WB - 6000 0280.130-00002 103.05
HL 41/38 - WB - 6000 0281.030-00004 110.05

HM 41/62 - WB - 6000 0280.140-00002 78.05

4 Item price per metre: 13.01 EUR/metre
HL 41/62 - WB - 6000 0281.040-00001 84.90

HM 41/62 D - WB - 6000 0280.170-00001 238.00

SV = pre-galvanised
HM 41/83 - SV - 6000 0280.130-00001 135.25
DETAN

5
HL 41/83 - SV - 6000 0281.030-00006 142.50
HM 41/62 - SV - 6000 0280.140-00001 103.90

HL 41/62 - SV - 6000 0281.040-00003 160.30

Framing systems
Item price per metre: 26,72 EUR/metre
HM 41/83 - FV - 6000 0280.130-00003 153.30
HL 41/83 - FV - 6000 0281.030-00005 160.30

HM 41/62 - FV - 6000 0280.140-00003 122.55

Bolts, accessories
7 HL 41/62 - FV - 6000 0281.040-00002 129.75

HM 41/62 D FV - 6000 0280.170-00002 298.30

116
L i g h t we i g h t f r a m i n g s y s t e m s L i g h t we i g h t f r a m i n g s y s t e m s

1
HM 35/50
HM 36/36 HM 315
HL 35/50 (slotted) 2
HM 422 HM 38/17 HL 36/36 (slotted) HM 36/20
Lifting systems
[EUR/ per metre [EUR/ per metre
Length [mm] [EUR/item] Length [mm] [EUR/item]
item] [EUR/m] item] [EUR/m]
WB = mill finish WB = mill finish 3
HM 422 - WB - 6000 0280.110-00001 30.80 HM 315 - WB - 6000 0280.060-00001 21.15
HM 422 - WB - FIXLÄ 5.13 4.05 HM 315 - WB - FIXLÄ 3.53 2.95
SV = pre-galvanised
HM 38/17 - WB - 6070 0280.020-00001 36.85 HM 35/50 - SV - 6000 0280.250-00001 70.15
HM 38/17 - WB - FIXLÄ 6.07 2.95 11.69

HM 36/36 - WB - 6000 0280.070-00001 42.70 HL 35/50 - SV - 6000 0281.110-00001 75.30
HM 36/36 - WB - FIXLÄ 7.12 4.05 12.55
HL 36/36 - WB - 6000 0281.050-00001 49.10

HM 315 - FV - 6000 0280.060-00002 33.45
4
HL 36/36 - WB - FIXLÄ 8.18 4.05 HM 315 - FV - FIXLÄ 5.58 2.95
For associated HALFEN bolts, see page 138.
HM 36/20 - WB - 6000 0280.240-00001 28.90
HM 36/20 - WB - FIXLÄ 4.82 2.95
HM 422 - FV - 6000 0280.110-00002 54.85
Ordering example for CUT LENGTH: HALFEN channels HM 38/17-FV
HM 422 - FV - FIXLÄ 9.14 4.05
Length required L: 1500 mm
DETAN
Ordering text: HM 38/17-FV-1500
HM 38/17 - FV - 6070 0280.020-00002 60.35 5
HM 38/17 - FV - FIXLÄ 9.94 2.95 Total price for cut lengths:
Price per meter [EUR/m] x length L [mm]
HM 36/36 - FV - 6000 0280.070-00002 72.35 + cut length surcharge
1000
HM 36/36 - FV - FIXLÄ 12.06 4.05
Note: The stated cut length surcharge apply for cut lengths of L ≥ 1000 mm.
HL 36/36 - FV - 6000 0281.050-00002 76.80
Cut length surcharge for length L < 1000 mm available upon request.
HL 36/36 - FV - FIXLÄ 12.80 4.05
Framing systems
Can also be supplied in stainless steel, material HCR 1.4547 upon request.
HM 36/20 - FV - 6000 49.65
HM 36/20 - FV - FIXLÄ
0280.240-00002
8.28 2.95 6
HM 38/17 - A2 - 6070 0280.020-00003 222.40
HM 38/17 - A2 - FIXLÄ 36.64 4.55
HM 38/17 - A4 - 6070 0280.020-00004 287.80
HM 38/17 - A4 - FIXLÄ 47.41 4.55
Bolts, accessories
HM 36/36 - A4 - 6000 0280.070-00003 335.65

HM 36/36 - A4 - FIXLÄ 55.94 6.45
7
HL 36/36 - A4 - 6000 0281.050-00003 350.70
HL 36/36 - A4 - FIXLÄ 58.45 6.45
117
L i g h t we i g h t f r a m i n g s y s t e m s Item name Article no. Price Price Cut l. supp.

[EUR/ per metre

item] [EUR/m]
1 HM 28/28 - A4 - 6000
HM 28/28 - A4 - FIXLÄ
0280.050-00004 222.65
37.11 6.45
HL 28/28 - A4 - 6000 0281.060-00004 237.20

HL 28/28 - A4 - FIXLÄ 39.53 6.45
HM 28/15 - A4 - 6070 0280.010-00003 183.05

HM 28/15 - A4 - FIXLÄ 30.16 4.55
HL 28/15 - A4 - 6070 0281.080-00003 198.15

2 HM 28/28
HL 28/28 slotted
HM 26/26
HL 26/26 slotted
HM 28/15
HL 28/15 slotted
HM 26/18
HL 26/18 slt.
HL 28/15 - A4 - FIXLÄ 32.64 4.55
Item name Article no. Price Price Cut l. supp. L i g h t we i g h t f r a m i n g s y s t e m s

[EUR/ per metre
item] [EUR/m]
WB = mill finish
HM 28/28 - WB - 6000 0280.050-00001 26.90
HM 28/28 - WB - FIXLÄ 4.48 4.05
Lifting systems
HL 28/28 - WB - 6000 0281.060-00001 31.35

3 HL 28/28 - WB - FIXLÄ 5.23 4.05
HM 28/15 - WB - 6070 0280.010-00001 23.15 HM 28/12 HM 20/12 HL 20/12 slotted

HM 28/15 - WB - FIXLÄ 3.81 2.95
HL 28/15 - WB - 6070 0281.080-00001 27.40 Item name Article no. Price Price Cut l. supp.
HL 28/15 - WB - FIXLÄ 4.51 2.95 [EUR/ per metre

SV = pre-galvanised item] [EUR/m]
HM 28/28 - SV - 6000 0280.050-00003 34.00 WB = mill finish
HM 28/28 - SV - FIXLÄ 5.67 4.05 HM 28/12 - WB - 6000 0280.260-00001 18.65
4 HM 28/12 - WB - FIXLÄ 3.11 2.95
HL 28/28 - SV - 6000 0281.060-00003 38.60
HL 28/28 - SV - FIXLÄ 6.43 4.05 HM 20/12 - WB - 6000 0280.030-00001 13.30
HM 20/12 - WB - FIXLÄ 2.22 2.95
HM 26/26 - SV - 6000 0280.040-00001 22.65
HM 26/26 - SV - FIXLÄ 3.78 1.55 HL 20/12 - WB - 6000 0281.090-00001 17.70
HL 20/12 - WB - FIXLÄ 2.95 2.95
HL 26/26 - SV - 6000 0281.070-00001 26.90 FV = hot-dip galvanised
HL 26/26 - SV - FIXLÄ 4.48 2.95 HM 28/12 - FV - 6000 0280.260-00002 30.80
DETAN
5 HM 26/18 - SV - 6000 0280.270-00001 17.70

HM 28/12 - FV - FIXLÄ 5.13 2.95
HM 26/18 - SV - FIXLÄ 2.95 2.95 HM 20/12 - FV - 6000 0280.030-00003 22.25

HM 20/12 - FV - FIXLÄ 3.71 2.95
HL 26/18 - SV - 6000 0281.120-00001 22.25
HL 26/18 - SV - FIXLÄ 3.71 2.95 HL 20/12 - FV - 6000 0281.090-00002 36.45
FV = hot-dip galvanised HL 20/12 - FV - FIXLÄ 4.41 2.95
HM 28/28 - FV - 6000 0280.050-00002 47.60 SS 304 = stainless steel
Framing systems
HM 28/28 - FV - FIXLÄ 7.93 4.05 HM 20/12 - A2 - 6000 0280.030-00002 81.45

HM 20/12 - A2 - FIXLÄ 13.58 4.55
6 HL 28/28 - FV - 6000
HL 28/28 - FV - FIXLÄ
0281.060-00002 51.90
8.65 4.05 HL 20/12 - A2 - 6000 0281.090-00003 96.30
HL 20/12 - A2 - FIXLÄ 16.05 4.55
HM 28/15 - FV - 6070 0280.010-00002 37.35 For associated HALFEN bolts, see page 139.
HM 28/15 - FV - FIXLÄ 6.15 2.95 See page 117.
Can also be supplied in stainless steel, material HCR 1.4547 upon request.
HL 28/15 - FV - 6070 0281.080-00004 42.05
HL 28/15 - FV - FIXLÄ 6.93 2.95
Bolts, accessories

HM 28/15 - A2 - 6070 0280.010-00004 137.85
7 HM 28/15 - A2 - FIXLÄ 22.71 4.55
HL 28/15 - A2 - 6070 0281.080-00002 152.40

HL 28/15 - A2 - FIXLÄ 25.11 4.55
SS 316 → continued on right column
118
h a l f e n dy n ag r i p f r a m i n g c h a n n e l s
HZM 38/23 HZS 38/23

HALFEN DYNAGRIP framing channel HALFEN DYNAGRIP bolt, with teeth,
incl. nut for channel 38/23
1
Teeth
hot-rolled,
Teeth
Item Thread x length l PU Article no. Price
Item name Article no. Price Price Cut l. supp. name [mm] [items] 0352.060- [EUR/100 items]
[EUR/ per metre GV8.8 = galvan. special coating*), strength class 8.8
Length [mm] 0284.060- [EUR/item]
item] [EUR/m] HZS 38/23 - M 12 × 30 GV8.8 100 00001 235.90
WB = mill finish
HZS 38/23 - M 12 × 40 GV8.8 50 00002 242.00
HZM 38/23 - WB - 6070
HZM 38/23 - WB -FIXLÄ
00001 87.40
14.40 6.45
HZS 38/23 - M 12 × 50 GV8.8 50 00003 254.40 2
HZS 38/23 - M 12 × 60 GV8.8 50 00004 260.55
HZS 38/23 - M 12 × 80 GV8.8 50 00005 408.55
HZS 38/23 - M 12 × 100 GV8.8 50 00006 541.15
HZM 38/23 - FV - 6070 00003 137.70
HZS 38/23 - M 12 × 125 GV8.8 50 00007 769.30
HZM 38/23 - FV - FIXLÄ 22.69 6.45
HZS 38/23 - M 12 × 150 GV8.8 50 00008 854.10
HZS 38/23 - M 12 × 200 GV8.8 - 00009
SS 316 = stainless steel upon request
HZS 38/23 - M 12 × 300 GV8.8 - 00010
Lifting systems
HZM 38/23 - A4 - 6070 00002 upon request
HZM 29/20
HZS 38/23 - M 16 × 30 GV8.8
HZS 38/23 - M 16 × 40 GV8.8
50
50
00011
00012
282.10
300.65 3
HALFEN DYNAGRIP framing channel HZS 38/23 - M 16 × 50 GV8.8 50 00013 313.00
HZS 38/23 - M 16 × 60 GV8.8 25 00014 328.40
HZS 38/23 - M 16 × 80 GV8.8 25 00015 383.90
HZS 38/23 - M 16 × 100 GV8.8 25 00016 408.55
HZS 38/23 - M 16 × 125 GV8.8 25 00017 541.15

HZS 38/23 - M 16 × 150 GV8.8 25 00018 1,019.05
hot-rolled, HZS 38/23 - M 16 × 200 GV8.8 25 00019 1,219.55
Teeth HZS 38/23 - M 16 × 300 GV8.8 25 00020 1,698.95
Item name Article no. Price Price Cut l. supp.

HZS 29/20
4
[EUR/ per metre
Length [mm] 0284.050- [EUR/item] HALFEN DYNAGRIP bolt,
item] [EUR/m]
WB = mill finish with teeth, incl. nut for
HZM 29/20 - WB - 6070 00001 59.10 channel 29/20
HZM 29/20 - WB -FIXLÄ 9.74 4.05
Teeth
HZM 29/20 - FV - 6070 00003 90.90
DETAN
See page 117.
14.98 3.90
Item Thread x length l PU Article no. Price 5
name [mm] [items] 0352.040- [EUR/100 items]
SIC GV8.8 = galvan. special coating*), strength class 8.8
HZS 29/20 - M 12 × 30 GV8.8 100 00001 180.35
Locking washer to prevent Application
HZS 29/20 - M 12 × 40 GV8.8 50 00002 194.25
HALFEN DYNAGRIP
bolts rotating out of the HZS 29/20 - M 12 × 50 GV8.8 50 00003 209.65
channel during HZS 29/20 - M 12 × 60 GV8.8 50 00004 212.80
HZS 29/20 - M 12 × 80 GV8.8 50 00005 249.75
Framing systems
assembly.
Locking
HZS 29/20 - M 12 × 100 GV8.8 50 00006 303.75
washer SIC
HALFEN DYNAGRIP channel
HALFEN bolt DYNAGRIP
HZS 29/20 - M 12 × 125 GV8.8
HZS 29/20 - M 12 × 150 GV8.8
50
50
00007
00008
420.90
798.60
6
HZS 29/20 - M 12 × 200 GV8.8 25 00009 959.00
HZS 29/20 - M 12 × 250 GV8.8 25 00010 1,127.00
Item name suitable for Article no. Price
HZS 29/20 - M 12 × 300 GV8.8 25 00011 1,356.70
HALFEN bolts 0372.000- [EUR/100 items]
GV = zinc plated
SIC 38/23-GV HZS 38/23-M16 00011 55.50
HZS 38/23
SIC 29/20-GV HZS 29/20-M12 00012 55.50 HALFEN DYNAGRIP bolts, without teeth incl. nuts,
Bolts, accessories
Note: Other SIC → see Bolts/accessories section → Page 140 for channel 38/23
*) Special galvanic coating for especially durable corrosion protection may be
used as a substitute for hot-dip galvanised. In accordance with approval 7
Z-21.4-1691 following the table provided in Appendix 5. HZS 29/20
HALFEN DYNAGRIP bolts, without teeth incl. nuts,
→ Page 141 for channel 29/20
119
h a l f e n c h a n n e l ac c e s s o r i e s , s o u n d att e n uato r
HPE PA
Channel end cap, plastic Channel closer strip Installation diagram:

Version: PA 22
PVC, hard,
HALFEN
1 Color: black medium grey (KS)
Framing channel,
e.g. HM 52/34
Item name suitable for Article no. Price

channel 0318.000- [EUR/100 items]
HPE 52/34 52/34 00001 75.20
HPE 50/40 50/40 00002 63.45
HPE 41/41 41/41 00003 65.15

2 HPE 41/22 41/22 00004 65.15 PA 41 PA 22 PA 18 H
HPE 36/36 36/36 00005 53.45 Version:

HPE 28/28 28/28 00006 41.75 PVC, hard (KS)
HPE 26/26 26/26 00007 41.75
HPE 26/18 26/18 00009 36.75
Version:
D GM Steel, pre-gal-
Lifting systems
Rubber insulation for vanised (SV)

3 HALFEN pipe clamps
Version: EPDM, heat-
resistant to +110 °C for channels: for channels: for channels:
50/40, 486, all 52/34, 50/30 36/36, 38/17
41-type channels
Item name Article no. Price Price per metre Cut l. suppl.
0321.000- [EUR/item] [EUR/m] [EUR/item]
KS = plastic
for pipe PA - 41 - KS - 3000 00002 10.35
Item name Article no. Price per metre
clamps Ø PA - 41 - KS - FIXLÄ. 3.45 1.30
4 DGM 25/8
D [mm]
17-96
0320.000-
00001
[EUR/m]
5.65 PA - 22 - KS - 3000 00003 6.70
DGM 30/8 100-157 00002 6.35 PA - 22 - KS - FIXLÄ. 2.23 0.85
DGM 40/8 160-235 00003 8.05
DGM 50/8 267-340 00004 12.15 PA - 18 H - KS - 3000 00004 6.10
DGM 60/8 355-532 00005 18.45 PA - 18 H - KS - FIXLÄ. 2.03 0.65
SDM SV = pre-galvanised
Sound attenuator (EPDM) Assembly example: PA - 41 - SV - 3000 00001 6.70
SDM
DETAN
PA - 41 - SV - FIXLÄ. 2.23 0.85

5
Ordering example for CUT LENGTH: PA - 22 - KS

Length required L: 1500 mm
Ordering text: PA - 22 - KS - 1500
Framing systems
Channel
slot width
6 suitable for
channels with
Price per
Article no.
Price
Total price for cut lengths:
Price per metre [EUR/m] x length L [mm]
Item name metre [EUR/ + cut length surcharge
slot width 1000
[EUR/m] 100 items]
[mm] 0319.000-
SDM 41/8 - roll 22 14.85 00001
SDM 41/8 - 4 cm - item 22 00002 106.90
SDM 36/6 - roll 18 13.35 00003

Bolts, accessories
SDM 36/6 - 4 cm - item 18 00004 85.15
7 SDM 28/6 - roll 12 8.65 00005

SDM 28/6 - 4 cm - item 12 00006 65.15
120
h a l f e n s y s t e m 5 2 f i tt i n g s
HV T 52 HV T 52

System 52 fittings, System 52 fittings,
suitable for channel 52/34, hole Ø 18 mm suitable for channel 52/34, hole Ø 18 mm
HVT 52-6
HVT 52-1 HVT 52-2 2

HVT 52-5
Lifting systems
HVT 52-7 HVT 52-8
3
HVT 52-3 HVT 52-4

HVT 52-9

0312.040- [EUR/item] 0312.040- [EUR/item]
HVT 52 - 1 - FV
HVT 52 - 2 - FV
00001
00002
15.65
10.00
HVT 52 - 5 - FV
HVT 52 - 6 - FV
00005
00006
28.50
6.25
4
HVT 52 - 3 - FV 00003 17.85 HVT 52 - 7 - FV 00007 22.55
HVT 52 - 4 - FV 00004 5.15 HVT 52 - 8 - FV 00008 20.85
HVT 52 - 9 - FV 00009 15.10

HVT 52 - 1 - A4 00011 43.10 HVT 52 - 5 - A4 00015 80.75
HVT 52 - 2 - A4 00012 21.15 HVT 52 - 6 - A4 00016 30.05
DETAN
HVT 52 - 3 - A4 00013 46.30 HVT 52 - 7 - A4 00017 61.65
HVT 52 - 4 - A4 00014 28.80 HVT 52 - 8 - A4 00018 60.50 5
HVT 52 - 9 - A4 00019 35.15
HALFEN s y s t e m 5 2 c h a n n e l r i n g
Channel ring assembly Outer radius
= ordering measurement
Manufacturing of channel rings,
braces, cantilevers and beams according to Articulated
Framing systems
your measurements. cantilever
Can be supplied in the following versions 6

• FV = hot-dip galvanised Channel slot
• SS 316 = stainless steel inside
Articulated beam
Bolts, accessories
Channel ring
7
Articulated brace
Basic channel
Price and delivery times available upon request HM 52/34
121
h a l f e n s y s t e m 41 f i tt i n g s
H V T 41 H V T 41
HALFEN system 41 fittings HALFEN system 41 fittings

suitable for channels 41/41 suitable for channels 41/41
HVT 41-43 HVT 41-44 HVT 41-45 HVT 41-47

HVT 41-31 HVT 41-33 Item name Article no. Price

0312.030- [EUR/item]
2 HVT 41 - 43 - FV 00022 4.15
HVT 41 - 44 - FV 00023 2.90
HVT 41 - 45 - FV 00024 2.05
HVT 41 - 47 - FV 00026 3.30

HVT 41-10 HVT 41 - 47 - A4 00072 17.70
Lifting systems
Item name Article no. Price H V T 41

0312.030- [EUR/item] HALFEN system 41 fittings
suitable for channels 41/41
HVT 41 - 31 - FV 00013 2.80
HVT 41 - 33 - FV 00014 3.00
HVT 41 - 10 - FV 00002 2.10

HVT 41 - 10 - A4 00049 13.75

HVT 41-11 HVT 41-25 HVT 41-26 HVT 41-13
H V T 41
4 HALFEN system 41 fittings
suitable for channels 41/41
HVT 41-65
HVT 41-66
HVT 41-15 HVT 41-77 HVT 41-78 HVT 41-27
DETAN

0312.030- [EUR/item]
HVT 41 - 11 - FV 00003 2.30
HVT 41 - 25 - FV 00010 2.45

HVT 41-67 HVT 41-68 HVT 41-75 HVT 41 - 26 - FV 00011 1.95
Framing systems
Item name Article no. Price HVT 41 - 13 - FV 00004 4.80
0312.030- [EUR/item]
HVT 41 - 77 - FV 00039 7.45
HVT 41 - 65 - FV 00032 1.30 HVT 41 - 78 - FV 00040 7.90
HVT 41 - 66 - FV 00033 1.95 HVT 41 - 15 - FV 00005 2.30
HVT 41 - 67 - FV 00034 2.40 HVT 41 - 27 - FV 00012 8.00
HVT 41 - 68 - FV 00035 1.55
HVT 41 - 75 - FV 00038 14.00 SS 316 = stainless steel
HVT 41 - 26 - A4 00057 12.10
Bolts, accessories

HVT 41 - 68 - A4 00079 6.95 HVT 41 - 13 - A4 00051 28.95
7
HVT 41 - 77 - A4 00082 45,20
HVT 41 - 78 - A4 00083 20,50
HVT 41 - 27 - A4 00058 55,15
122
h a l f e n f i tt i n g s s y s t e m 41
H V T 41 H V T 41

HVT 41-36 HVT 41-37 HVT 41-19

HVT 41-23 HVT 41-22 HVT 41-41R HVT 41-41L
2
HVT 41-73 HVT 41-97 HVT 41-08
HVT 41-46 HVT 41-57 HVT 41-58 HVT 41-84 0312.030- [EUR/item]
Item name Article no. Price FV = hot-dip galvanised
0312.030- [EUR/item] HVT 41 - 36 - FV 00017 3.80
Lifting systems
FV = hot-dip galvanised HVT 41 - 37 - FV 00018 5.15
HVT 41 - 23 - FV 00009 3.45 HVT 41 - 19 - FV
HVT 41 - 73 - FV
00006
00037
3.00
11.40 3
HVT 41 - 22 - FV 00008 2.35 HVT 41 - 97 - FV 00047 2.30
HVT 41 - 41L - FV 00020 3.40 HVT 41 - 08 - FV 00001 2.30

HVT 41 - 41R - FV 00021 3.40
H V T 41

HVT 41 - 46 - FV 00025 7.40 HALFEN system 41 fittings,
HVT 41 - 57 - FV 00029 15.65 suitable for channels 41/22
HVT 41 - 58 - FV 00030 13.05
HVT 41 - 84 - FV 00041 6.50

4
HVT 41 - 22 - A4 00054 17.00
HVT 41-49 HVT 41-40
HVT 41 - 46 - A4 00071 44.90 Item name Article no. Price
HVT 41 - 57 - A4 00074 56.00 0312.030- [EUR/item]
HVT 41 - 58 - A4 00075 37.05 FV = hot-dip galvanised
DETAN
HVT 41 - 49 - FV 00027 1.95
HVT 41 - 84 - A4 00084 54.45 5
HVT 41 - 40 - FV 00019 3.00
Beam clamp
HALFEN system 41 fittings Note: Beam clamp TK → page 146
H V T 41
Framing systems
Help finding HVT system 41 fittings
Type
HVT 41-08
Page
123 top right
Type
HVT 41-36
Page
123 top right
Type
HVT 41-66
Page
122 bot. left
6
HVT 41-10 122 top left HVT 41-37 123 top right HVT 41-67 122 bot. left
HVT 41-85 HVT 41-89 HVT 41-86 HVT 41-11 122 mid. right HVT 41-40 123 mid. right HVT 41-68 122 bot. left
(use in pairs) (use in pairs) (use in pairs) HVT 41-13 122 mid. right HVT 41-41 123 top left HVT 41-73 123 top right
Item name suitable for Article no. Price HVT 41-15 122 mid. right HVT 41-43 123 top right HVT 41-75 122 bot. left
HALFEN bolts 0312.030- [EUR/item] HVT 41-19 123 top right HVT 41-44 122 top right HVT 41-77 122 mid. right
FV = hot-dip galvanised HVT 41-22 123 top left HVT 41-45 122 top right HVT 41-78 122 mid. right
Bolts, accessories
HVT 41 - 85 FV 41/41, 41/22 D 00042 3.60 HVT 41-23 123 top left HVT 41-46 123 top left HVT 41-84 123 top left
HVT 41 - 86 FV 41/41 D, 41/83 00044 3.95 HVT 41-25 122 mid. right HVT 41-47 122 top right HVT 41-85 123 bot. left
HVT 41 - 89 FV All chan. 41/41 to 41/62 D 00046 4.80 HVT 41-26 122 mid. right HVT 41-49 123 mid. right HVT 41-86 123 bot. left 7
HVT 41-27 122 mid. right HVT 41-57 123 top left HVT 41-89 123 bot. left
SS 316 = stainless steel HVT 41-31 122 top left HVT 41-58 123 top left HVT 41-97 123 top right
HVT 41 - 85 A4 41/41, 41/22 D 00085 36.25 HVT 41-33 122 top left HVT 41-65 122 bot. left VUS 41/41 144
HVT 41 - 86 A4 41/41 D, 41/83 00086 39.20
123
h a l f e n P o W e r c l i c K 41 f i T T i n g s Y s T e m
h c s - V T 41 - 5 8 h c s - V T 41 - 4 6
Channel foot HALFEN POWERCLICK framing system T-fitting HALFEN POWERCLICK framing system
hcs-VT 41-58/2
Channel foot with 2 screws, hcs-VT 41-46/4v hcs-VT 41-46/4s
1 pre-fitted with 2 pre-fitted with 4 pre-fitted screws
screws, (2 of which are on the side)
2
[items] 0300.010- [EUR/item] Item name PU Article no. Price
fV = hot-dip galvanised [items] 0300.010- [EUR/item]
hcs-VT 41 - 58/2 - fV 10 00029 15.00 fV = hot-dip galvanised
hcs - VT 41 - 46/4v - fV 10 00041 13.85
ss 316 = stainless steel hcs - VT 41 - 46/4s - fV 10 00038 13.85
hcs-VT 41 - 58/2 - a4 10 00028 38.00
lifting systems

h c s - V T 41 - 57
3 Fitting HALFEN POWERCLICK framing system
hcs - VT 41 - 46/4v - a4
hcs - VT 41 - 46/4s - a4
10
10
00040
00037
40.65
40.65
h c s - V T 41 - 2 6
hcs-VT 41-57/2 hcs-VT 41-57/6
Bracket HALFEN POWERCLICK framing system
with 2 pre-fitted with 6 pre-fitted
screws screws
hcs-VT 41-26/1 hcs-VT 41-26/3

with 1 pre-fitted screw with 3 pre-fitted screws

Item name PU Article no. Price [items] 0300.010- [EUR/item]
DeTan
[items] 0300.010- [EUR/item] fV = hot-dip galvanised

5 fV = hot-dip galvanised hcs-VT 41 - 26/1 - fV 10 00005 3.80
hcs-VT 41 - 57/2 - fV 10 00023 23.00 hcs-VT 41 - 26/3 - fV 10 00008 7.55
hcs-VT 41 - 57/6 - fV 10 00026 25.35
ss 316 = stainless steel hcs-VT 41 - 26/1 - a4 10 00004 16.70
hcs-VT 41 - 57/2 - a4 10 00022 63.35 hcs-VT 41 - 26/3 - a4 10 00007 28.60
hcs-VT 41 - 57/6 - a4 10 00025 91.20 PU [items] = packaging unit [items]
framing systems
h a l f e n s y s t e m 41 c h a n n e l r i n g
6 Channel ring assembly
Articulated
Outer radius
= ordering measurement
Manufacturing of channel rings,
cantilever
braces, cantilevers and beams according to
your measurements.
Can be supplied in the following versions Channel slot

• FV = hot-dip galvanised inside
• SS 316 = stainless steel
Bolts, accessories
Articulated beam
7 Channel ring
Articulated brace
Price and delivery times available upon request
124
h a l f e n f i T T i n g s s Y s T e m P o W e r c l i c K 41
h c s - V T 41 - 8 4 h c s - V T 41 - 27

Corner connector HALFEN POWERCLICK framing system Reinforcing bracket HALFEN POWERCLICK framing system
hcs-VT 41-84/4
with 4 pre-fitted hcs-VT 41-27/1 hcs-VT 41-27/3 1
screws with 1 pre-fitted with 3 pre-fitted
screw screws
[items] 0300.010- [EUR/item] Item name PU Article no. Price
fV = hot-dip galvanised [items] 0300.010- [EUR/item]
hcs-VT 41 - 84/4 - fV 10 00035 13.30 fV = hot-dip galvanised
hcs-VT 41 - 27/1 - fV 10 00011 8.80
ss 316 = stainless steel hcs-VT 41 - 27/3 - fV 10 00014 12.25
hcs-VT 41 - 84/4 - a4 10 00034 71.75
lifting systems
h c s - V T 41 - 6 8 / 2 hcs-VT 41 - 27/1 - a4 10 00010 54.60
90° bracket with 2 pre-fitted screws
Framing channel connection
HALFEN POWERCLICK framing system hcs-VT 41 - 27/3 - a4 10 00013 66.40
3
h c s - V T 41 - 47
U-clamp HALFEN POWERCLICK framing system
hcs-VT 41-68/2 hcs-VT 41-47/3

with 3 pre-fitted

screws

4
fV = hot-dip galvanised
hcs-VT 41 - 68/2 - fV 1 00043 6.80
ss 316 = stainless steel Item name PU Article no. Price

hcs-VT 41 - 68/2 - a4 1 00044 16.15 [items] 0300.010- [EUR/item]
h c s - V T 41 - 2 2
DeTan
hcs-VT 41 - 47/3 - fV 10 00020 8.65
Reinforcing plate HALFEN POWERCLICK framing system 5
hcs-VT 41 - 47/3 - a4 10 00019 33.70
hcs-VT 41-22/3
with 3 pre-fitted
screws h c s - V T 41 - 7 7
Channel connector HALFEN POWERCLICK framing system
hcs-VT 41-77/4
framing systems
with 4 pre-fitted
screws
6
hcs-VT 41 - 22/3 - fV 10 00002 7.50

Bolts, accessories
hcs-VT 41 - 22/3 - a4 10 00001 33.00 Item name PU Article no. Price

PU [items] = packaging unit [items] fV = hot-dip galvanised 7
hcs-VT 41 - 77/4 - fV 10 00032 13.55

hcs-VT 41 - 77/4 - a4 10 00031 63.80
125
h a l f e n s y s t e m 3 6 a n d s y s t e m 2 8 f i tt i n g s
HALFEN s y s t e m 3 6 f i t t i n g s HALFEN s y s t e m 3 6 f i t t i n g s

suitable for channels 36/36 suitable for channels 36/36
1 HVT 36-7
HVT 36-3
HVT 36-5 HVT 36-8

HM 28/28
HVT 36-1
2 HVT 36-4
HVT 36-6
HVT 36-9
HVT 36-2
0312.020- [EUR/item] GV = electro plated, FV = hot-dip galvanised
GV = electro plated HVT 36 - 5 - GV 00005 2.45
HVT 36 - 1 - GV 00001 2.95 HVT 36 - 6 - GV 00006 6.80
HVT 36 - 2 - GV 00002 1.25 HVT 36 - 7 - FV 00007 14.85
Lifting systems
HVT 36 - 3 - GV 00003 1.95 HVT 36 - 8 - GV 00008 5.75
3 HVT 36 - 4 - GV 00004 2.05 HVT 36 - 9 - FV 00009 4.60

HVT 36 - 2 -A4 00010 12.15 HVT 36 - 7 -A4 00011 31.20
HALFEN s y s t e m 3 6 c h a n n e l r i n g
Outer measurement as specified measurement
Assembly channel rings

Articulated
Manufacturing of channel rings, cantilever
braces, cantilevers and beams following
4 your measurements.
Channel slot
Can be supplied in the following versions inside
• FV = hot-dip galvanised
• SS 316 = stainless steel Articulated beam
Channel ring
Basic channel
Articulated brace Channel ring:
Price and delivery times available upon request
DETAN
HM 38/17
5
HALFEN s y s t e m 2 8 f i t t i n g s HALFEN s y s t e m 2 8 f i t t i n g s
HALFEN system 28 fittings, suitable for channels 28/28 HALFEN system 28 fittings, suitable for channels 28/28
Framing systems
HVT 28-1 HVT 28-2 HVT 28-5 HVT 28-6
HVT 28-3 HVT 28-4

HVT 28-7 HVT 28-8 HVT 28-9
Bolts, accessories

0312.010- [EUR/item] GV = electro plated, FV = hot-dip galvanised
7 GV = electro plated HVT 28 - 5 - GV 00005 1.30
HVT 28 - 1 - GV 00001 2.05 HVT 28 - 6 - GV 00006 5.40
HVT 28 - 2 - GV 00002 1.10 HVT 28 - 7 - FV 00007 12.15
HVT 28 - 3 - GV 00003 1.25 HVT 28 - 8 - GV 00008 2.75
HVT 28 - 4 - GV 00004 1.10 HVT 28 - 9 - FV 00009 3.80
126
h a l f e n c a n t i l e v e r b r ac k e t
KON 2 8 / 1 KON 41 / 1

HALFEN cantilever bracket HALFEN cantilever bracket
with end cap with end cap

L [mm] 0310.050- [EUR/item]
FV = hot-dip galvanised Item name Article no. Price
KON 28/1 - FV - 100 00001 9.80 L [mm] 0310.010- [EUR/item]
KON 28/1 - FV - 200 00002 10.45 FV = hot-dip galvanised
KON 28/1 - FV - 300 00003 11.05 KON 41/1 - FV - 175 00001 15.40
KON 28/1 - FV - 400 00004 11.50 KON 41/1 - FV - 325 00002 17.20 2
SS 316 = stainless steel KON 41/1 - FV - 475 00003 18.90
KON 28/1 - A4 - 100 00005 23.00
KON 28/1 - A4 - 200 00006 26.05 SS 316 = stainless steel
KON 28/1 - A4 - 300 00007 29.05 KON 41/1 - A4 - 175 00004 46.50
KON 28/1 - A4 - 400 00008 31.90 KON 41/1 - A4 - 325 00005 59.55
KON 41/1 - A4 - 475 00006 72.80
KON 3 6 / 1
Lifting systems
HALFEN cantilever bracket KON 41 / D
with end cap HALFEN cantilever bracket
with end caps
3

L [mm] 0310.060- [EUR/item] L [mm] 0310.030- [EUR/item]
KON 36/1 - FV - 300 00001 14.75
KON 41/D - FV - 325 00001 22.40
4
KON 36/1 - FV - 400 00002 15.95 KON 41/D - FV - 475 00002 26.55
KON 36/1 - FV - 500 00003 17.10 KON 41/D - FV - 625 00003 31.80
KON 36/1 - FV - 600 00004 18.30
KON 36/1 - A4 - 300 00005 44.90 KON 41/D - A4 - 325 00004 91.00
KON 36/1 - A4 - 400 00006 50.30 KON 41/D - A4 - 475 00005 117.45
KON 36/1 - A4 - 500 00007 56.05 KON 41/D - A4 - 625 00006 142.35
DETAN
KON 36/1 - A4 - 600 00008 61.40
KON 41 / 2 5
KON 3 6 / 2 HALFEN cantilever bracket
HALFEN cantilever bracket with end cap
with end cap
Framing systems
6
L [mm] 0310.070- [EUR/item] L [mm] 0310.020- [EUR/item]
KON 36/2 - FV - 300 00001 26.20 KON 41/2 - FV - 325 00001 31.85
KON 36/2 - FV - 400 00002 28.85 KON 41/2 - FV - 475 00002 35.15
KON 36/2 - FV - 500 00003 31.60 KON 41/2 - FV - 625 00003 41.45
KON 36/2 - FV - 600 00004 34.05 KON 41/2 - FV - 775 00004 49.00
Bolts, accessories
KON 36/2 - FV - 700 00005 36.75

KON 36/2 - A4 - 300 00006 74.65 KON 41/2 - A4 - 325 00005 105.85 7
KON 36/2 - A4 - 400 00007 86.55 KON 41/2 - A4 - 475 00006 148.85
KON 36/2 - A4 - 500 00009 98.65 KON 41/2 - A4 - 625 00007 183.50
KON 36/2 - A4 - 600 00010 110.90 KON 41/2 - A4 - 775 00008 215.00
KON 36/2 - A4 - 700 00011 123.00
127
h a l f e n c a n T i l e V e r B r ac K e T s , ac c e s s o r i e s
Ko n 41 / 3 Ko n 5 2 / 2
HALFEN cantilever brackets HALFEN cantileverbracket

with end caps Assembly example: with end cap
= Cut measurement
'a1' to length on Item name Article no. Price

site if necessary L [mm] 0310.080- [EUR/item]
2 Item name Article no. Price Kon 52/2 - fV - 500 00001 81.25
L [mm] 0310.040- [EUR/item] Kon 52/2 - fV - 600 00002 88.70
fV = hot-dip galvanised Kon 52/2 - fV - 700 00003 95.85
Kon 41/3 - fV - 600 00002 98.45 Kon 52/2 - fV - 800 00004 104.15
Kon 52/2 - fV - 900 00005 112.20
ss 316 = stainless steel Kon 52/2 - fV - 1000 00006 120.50
Kon 41/3 - a4 - 600 00001 245.35 Kon 52/2 - fV - 1100 00007 128.75
lifting systems
Ko n Z 1 Kon 52/2 - a4 - 500 00008 368.95
3 Bracing for cantilevers brackets KON 41 Kon 52/2 - a4 - 600

Kon 52/2 - a4 - 700
00009
00010
418.80
468.60
Kon 52/2 - a4 - 800 00011 523.70
Assembly example: Kon 52/2 - a4 - 900 00012 578.45
Kon 52/2 - a4 - 1000 00013 633.40
Kon 52/2 - a4 - 1100 00014 688.40
c o n n e c t i o n c o m p o n e n t f o r Ko n 5 2 / 2
Kon 52/3
Cantilever bracket brace
Assembly sketch:
0310.110- [EUR/item]
Kon Z1 - fV 00002 18.75
ss 316 = stainless steel Kon 52/4

Kon Z1 - a4 00001 69.85 Connection
bracket
h c s - Ko n - Z 1
DeTan
5 Bracing HALFEN POWERCLICK framing system

for cantilevers brackets KON 41, Item name Article no. Price
with 2 pre-fitted bolts, LSt [mm] 0310.090- [EUR/item]
Kon 52/3 - fV - 532 00001 20.85
Assembly example: Kon 52/3 - fV - 602 00002 23.30
Kon 52/3 - fV - 673 00003 24.85
Kon 52/3 - fV - 744 00004 27.80
framing systems
Kon 52/3 - fV - 815 00005 30.60
6 Kon 52/3 - fV - 961

Kon 52/3 - fV - 1102
00006
00007
35.45
40.25
0310.100-
Kon 52/4 - fV 00002 11.05
Item name Article no. Price ss 316 = stainless steel
0302.050- [EUR/item] 0310.090-
fV = hot-dip galvanised Kon 52/3 - a4 - 532 00012 111.25
hcs Kon - Z1 - fV 00002 21.40 Kon 52/3 - a4 - 602 00013 125.20
Bolts, accessories
Kon 52/3 - a4 - 673 00014 134.30

ss 316 = stainless steel Kon 52/3 - a4 - 744 00015 153.25
7 hcs Kon - Z1 - a4 00001 74.85 Kon 52/3 - a4 - 815 00016 168.65
Kon 52/3 - a4 - 961 00017 196.55
Kon 52/3 - a4 - 1102 00018 224.75
0310.100-
Kon 52/4 - a4 00001 26.25
128
halfen pipe cl amps
HRS - A HRS-A Alpha pipe clamp

Alpha pipe clamp - Continuation of left column
Ø D [mm] 0311.010- [EUR/100 items]
HRS - A - 17 -A4 00001 675.70
1
HRS - A - 21.5-A4 00002 766.65
HRS - A - 27 -A4 00003 849.85
HRS - A - 33.5-A4 00004 961.60
HRS - A - 42.5-A4 00005 1,088.90
HRS - A - 48.5-A4 00006 1,192.90
Item name Article no. Price HRS - A - 50 -A4 00007 1,257.80
Ø D [mm] 0311.010- [EUR/100 items] HRS - A - 56 -A4 00008 1,356.65
FV = hot-dip galvanised HRS - A - 60 -A4 00009 1,445.00
HRS - A - 17 -FV 00048 115.30 HRS - A - 64 -A4 00010 1,530.70 2
HRS - A - 21.5-FV 00049 121.95 HRS - A - 77 -A4 00011 1,816.65
HRS - A - 27 -FV 00050 123.60 HRS - A - 80 -A4 00012 1,881.60
HRS - A - 33.5-FV 00051 133.55 HRS - A - 84 -A4 00013 1,907.55
HRS - A - 42.5-FV 00052 138.60 HRS - A - 89 -A4 00014 2,102.55
HRS - A - 48.5-FV 00053 153.65 HRS - A - 96 -A4 00015 2,167.45
HRS - A - 50 -FV 00054 168.75 HRS - A -100 -A4 00016 3,121.20
HRS - A - 56 -FV 00055 180.45 HRS - A -105 -A4 00017 3,274.55
Lifting systems
HRS - A - 60 -FV 00056 182.05 HRS - A -110 -A4 00018 3,417.60
HRS - A - 64 -FV
HRS - A - 77 -FV
00057
00058
188.70
268.95
HRS - A -116 -A4
HRS - A -125 -A4
00019
00020
3,451.35
3,615.10 3
HRS - A - 80 -FV 00059 272.30 HRS - A -131 -A4 00021 3,760.60
HRS - A - 84 -FV 00060 278.95 HRS - A -137 -A4 00022 3,906.20
HRS - A - 89 -FV 00061 287.30 HRS - A -141 -A4 00023 3,937.35
HRS - A - 96 -FV 00062 304.00 HRS - A -150 -A4 00024 4,197.20
HRS - A -100 -FV 00063 347.40 HRS - A -157 -A4 00025 4,376.60

HRS - A -105 -FV 00064 364.10 HRS - A -160 -A4 00026 5,496.70
HRS - A -110 -FV 00065 379.20 HRS - A -168 -A4 00027 5,597.95
HRS - A -116 -FV 00066 474.35 HRS - A -176 -A4 00028 5,795.50
HRS - A -125 -FV
HRS - A -131 -FV
00067
00068
497.75
539.55
HRS - A -185 -A4
HRS - A -200 -A4
00029
00030
6,167.20
6,398.50
4
HRS - A -137 -FV 00069 579.60 HRS - A -212 -A4 00031 6,793.55
HRS - A -141 -FV 00070 611.30 HRS - A -218 -A4 00032 6,939.00
HRS - A -150 -FV 00071 631.35 HRS - A -225 -A4 00033 7,136.50
HRS - A -157 -FV 00072 648.05 HRS - A -235 -A4 00034 7,656.30
HRS - A -160 -FV 00073 706.50 HRS - A -267 -A4 00035 15,494.60
HRS - A -168 -FV 00074 718.20 HRS - A -273 -A4 00036 15,710.35
HRS - A -176 -FV 00075 754.95 HRS - A -285 -A4 00037 16,521.20
DETAN
HRS - A -185 -FV 00076 805.10 HRS - A -326 -A4 00038 16,604.35
HRS - A -200 -FV 00077 836.85 HRS - A -340 -A4 00039 19,509.85 5
HRS - A -212 -FV 00078 970.40 HRS - A -355 -A4 00040 19,943.95
HRS - A -218 -FV 00079 970.40 HRS - A -400 -A4 00041 20,258.35
HRS - A -225 -FV 00080 1,010.50 HRS - A -406 -A4 00042 20,349.35
HRS - A -235 -FV 00081 1,038.90 HRS - A -420 -A4 00043 21,890.45
HRS - A -267 -FV 00083 6,108.25 HRS - A -429 -A4 00044 23,429.00
HRS - A -273 -FV 00084 6,216.80 HRS - A -508 -A4 00045 24,876.65
HRS - A -285 -FV 00085 7,285.85 HRS - A -525 -A4 25,609.55
Framing systems
00046
HRS - A -326 -FV 00086 7,471.20 HRS - A -532 -A4 00047 25,947.35
HRS - A -340 -FV
HRS - A -355 -FV
00087
00088
7,611.55
7,892.15
Measurement D = nominal diameter of pipe clamps, corresponds to outer pipe
diameter
6
HRS - A -400 -FV 00089 8,723.95
HRS - A -406 -FV 00090 9,363.65
HRS - A -420 -FV 00091 9,811.30
HRS - A -429 -FV 00092 10,098.60
HRS - A -508 -FV 00093 11,348.00
HRS - A -525 -FV 00094 13,245.45
Bolts, accessories
HRS - A -532 -FV 00095 14,274.35

- Stainless steel version, see right column -
7
129
halfen pipe cl amps
HCS - RA D HCS-RAD pipe clamp set - Continuation of left column -

Pipe clamp set Pipe bearing axially... Pipe bearing Span

Price
braced braced remo- width Article no.
Item name [EUR/
vable Ø D
HCS-RAD item]
1 Scope of supply: SS 316 = stainless steel
DN DN [mm] 0303.010-
1 x Alpha pipe clamp HCS - RAD - 77 - A4 50 50 60-65 00008 22.40

1 x DGM rubber insulation - can be moved
HCS - RAD - 80 - A4 63-68 00009 25.65
(enclosed loose as rolls) HCS - RAD - 84 - A4 67-72 00010 25.70
1 x RUV pipe rest HCS - RAD - 89 - A4 72-77 00011 25.65
HCS - RAD - 96 - A4 79-84 00012 28.40
Packaging unit: 1 set
HCS - RAD -100 - A4 83-88 00013 37.25

Pipe bearing Span HCS - RAD -105 - A4 80 80 88-93 00014 38.65
Price
braced remo- width Article no. HCS - RAD -110 - A4 93-98 00015 39.95
2 Item name
vable ØD
[mm]
[EUR/
item] HCS - RAD -116 - A4 99-104 00016 40.05
DN DN 0303.010- HCS - RAD -125 - A4 108-113 00017 41.85
FV = hot-dip galvanised HCS - RAD -131 - A4 100 100 114-119 00018 43.25
HCS - RAD - 33 - FV 16.5-21.5 00042 4.85 HCS - RAD -137 - A4 120-125 00019 44.55
HCS - RAD - 42 - FV 25.5-30.5 00043 4.85 HCS - RAD -141 - A4 124-129 00020 44.80
HCS - RAD - 48 - FV 25 25 31.5-36.5 00044 5.25 HCS - RAD -150 - A4 133-138 00021 47.65
HCS - RAD - 50 - FV 33-38 00045 5.35 HCS - RAD -157 - A4 125 125 140-145 00022 49.20
HCS - RAD - 56 - FV 39-44 00046 5.50 HCS - RAD -160 - A4 143-148 00023 60.20
Lifting systems
HCS - RAD - 60 - FV 40 43-48 00047 5.60 HCS - RAD -168 - A4 151-156 00024 61.15
3 HCS - RAD - 64 - FV
HCS - RAD - 77 - FV 50
40
50
47-52
60-65
00048
00049
5.75
6.50
HCS - RAD -176 - A4
HCS - RAD -185 - A4 150 150
159-164
168-173
00025
00026
62.75
66.80
HCS - RAD -100 - FV 83-88 00054 9.35 HCS - RAD -235 - A4 218-223 00031 81.00
HCS - RAD -105 - FV 80 80 88-93 00055 9.50 HCS - RAD -267 - A4 250-255 00032 154.25
4 HCS - RAD -125 - FV
HCS - RAD -131 - FV 100 100
108-113
114-119
00058
00059
10.95
11.30
HCS - RAD -326 - A4
HCS - RAD -340 - A4
309-314
323-328
00035
00036
168.40
194.90
HCS - RAD -157 - FV 125 125 140-145 00063 12.50 HCS - RAD -420 - A4 403-408 00040 218.35
HCS - RAD -168 - FV 151-156 00065 14.10 see below.
HCS - RAD -176 - FV 159-164 00066 14.35 Measurement 'D' for pipe clamps HCS-RAD: Allowing for the thickness of the rubber
insulation support: D
minus 16 mm corresponds to the outer pipe Ø (see value in
DETAN
HCS - RAD -185 - FV 150 150 168-173 00067 15.25

5 HCS - RAD -200 - FV 183-188 00068 15.50 table for Ø D).
HCS - RAD -212 - FV 195-200 00069 17.00 A c c e s s o r i e s f o r HCS - RA D
HCS - RAD -218 - FV 201-206 00070 17.00 Bolt connection for pipe clamp attachments HCS-RAD
HCS - RAD -225 - FV 208-213 00071 17.80 (FOR ALL 41-TYPE CHANNELS)
→ 2 x HS 41/41-M10 x 35
HCS - RAD -235 - FV 218-223 00072 18.00
Bolt connections are → 2 x HS 41/41-M12 x 35
HCS - RAD -267 - FV 250-255 00073 65.35
needed for all pipe clamp → 2 x HS 41/41-M10 x 35
HCS - RAD -273 - FV 256-261 00074 67.60
(ordered separately): + 2 x VUS 41/41-M10
HCS - RAD -285 - FV 268-273 00075 77.45
Framing systems
HCS - RAD -326 - FV 309-314 00076 80.25 → 2 x HS 41/41-M12 x 35

+ 2 x VUS 41/41-M12
6 HCS - RAD -340 - FV
HCS - RAD -355 - FV
323-328
338-343
00077
00078
82.10
84.55
Pipe clamp attachments can also be supplied fully pre-fitted,
as of 50 items/dimensions, prices available upon request.
HCS - RAD -400 - FV 383-388 00079 93.45
HCS - RAD -406 - FV 389-394 00080 99.10 for bolt Price
HCS - RAD -420 - FV 403-408 00081 103.00 connections [EUR/100 items]
HCS - RAD -429 - FV 412-417 00082 105.50 FV = hot-dip galvanised
SS 316 = stainless steel HS 41/41 - M10 x 35 - FV 0323.000-00003 190.40
HCS - RAD - 33 - A4 16.5-21.5 00001 14.10 HS 41/41 - M12 x 35 - FV 0323.000-00004 193.75
Bolts, accessories
HCS - RAD - 42 - A4 25.5-30.5 00002 15.30 VUS 41/41 - M10 - FV 0371.010-00005 55.50
HCS - RAD - 48 - A4 25 25 31.5-36.5 00003 16.60 VUS 41/41 - M12 - FV 0371.010-00006 55.50
7 HCS - RAD - 50 - A4 33-38 00004 17.10 SS 316 = stainless steel
HCS - RAD - 56 - A4 39-44 00005 18.05 HS 41/41 - M10 x 35 - A4 0323.000-00001 683.15
HCS - RAD - 60 - A4 40 43-48 00006 18.90 HS 41/41 - M12 x 35 - A4 0323.000-00002 717.75
HCS - RAD - 64 - A4 40 47-52 00007 19.55 VUS 41/41 - M10 - A4 0371.010-00002 340.65
- continued on right column - VUS 41/41 - M12 - A4 0371.010-00003 340.65
130
halfen pipe cl amps
HRS - B HRS-B Beta pipe clamp

Beta pipe clamp - Continuation of left column
Ø D [mm] 0311.030- [EUR/100 items]
HRS - B - 21.5-A4 00002
1
HRS - B - 27 -A4 00003
HRS - B - 33.5-A4 00004
HRS - B - 42.5-A4 00005
HRS - B - 48.5-A4 00006
HRS - B - 50 - A4 00007
Item name Article no. Price HRS - B - 56 - A4 00008
Ø D [mm] 0311.030- [EUR/100 items] HRS - B - 60 - A4 00009
FV = hot-dip galvanised HRS - B - 64 - A4 00010
HRS - B - 21.5-FV 00049 HRS - B - 77 - A4 00011 2
HRS - B - 27 -FV 00050 HRS - B - 80 - A4 00012
HRS - B - 33.5-FV 00051 HRS - B - 84 - A4 00013
HRS - B - 42.5-FV 00052 HRS - B - 89 - A4 00014
HRS - B - 48.5-FV 00053 HRS - B - 96 - A4 00015
HRS - B - 50 -FV 00054 HRS - B -100 - A4 00016
HRS - B - 56 -FV 00055 HRS - B -105 - A4 00017
HRS - B - 60 -FV 00056 HRS - B -110 - A4 00018
Lifting systems
HRS - B - 64 -FV 00057 HRS - B -116 - A4 00019
HRS - B - 77 -FV
HRS - B - 80 -FV
00058
00059
HRS - B -125 - A4
HRS - B -131 - A4
00020
00021 3
HRS - B - 84 -FV 00060 HRS - B -137 - A4 00022
HRS - B - 89 -FV 00061 HRS - B -141 - A4 00023
HRS - B - 96 -FV 00062 HRS - B -150 - A4 00024 upon
HRS - B -100 -FV 00063 HRS - B -157 - A4 00025 request
HRS - B -105 -FV 00064 HRS - B -160 - A4 00026

HRS - B -110 -FV 00065 HRS - B -168 - A4 00027
HRS - B -116 -FV 00066 HRS - B -176 - A4 00028
HRS - B -125 -FV 00067 HRS - B -185 - A4 00029
HRS - B -131 -FV
HRS - B -137 -FV
00068
00069
HRS - B -200 - A4
HRS - B -212 - A4
00030
00031
4
HRS - B -141 -FV 00070 HRS - B -218 - A4 00032
HRS - B -150 -FV 00071 upon HRS - B -225 - A4 00033
HRS - B -157 -FV 00072 request HRS - B -235 - A4 00034
HRS - B -160 -FV 00073 HRS - B -267 - A4 00035
HRS - B -168 -FV 00074 HRS - B -273 - A4 00036
HRS - B -176 -FV 00075 HRS - B -285 - A4 00037
HRS - B -185 -FV 00076 HRS - B -326 - A4 00038
DETAN
HRS - B -200 -FV 00077 HRS - B -340 - A4 00039
HRS - B -212 -FV 00078 HRS - B -355 - A4 00040 5
HRS - B -218 -FV 00079 HRS - B -400 - A4 00041
HRS - B -225 -FV 00080 HRS - B -406 - A4 00042
HRS - B -235 -FV 00081 HRS - B -420 - A4 00043
HRS - B -267 -FV 00082 HRS - B -429 - A4 00044
HRS - B -273 -FV 00083 HRS - B -508 - A4 00045
HRS - B -285 -FV 00084 HRS - B -525 - A4 00046
HRS - B -326 -FV 00085 HRS - B -532 - A4
Framing systems
00047
HRS - B -340 -FV 00086 easurement D = nominal diameter of pipe clamps, corresponds to outer pipe
M
HRS - B -355 -FV
HRS - B -400 -FV
00087
00088
diameter
6
HRS - B -406 -FV 00089
HRS - B -420 -FV 00090
HRS - B -429 -FV 00091
HRS - B -508 -FV 00092
HRS - B -525 -FV 00093
HRS - B -532 -FV 00094
Bolts, accessories
- Stainless steel version, see right column -
131
halfen pipe cl amps
HRS - D HRS-D Delta pipe clamp

Delta pipe clamp - Continuation of left column

Ø D [mm] 0311.050- [EUR/100 items]

HRS - D -218 -A4 00022 11,635.30
HRS - D -225 -A4 00023 11,900.35
HRS - D -235 -A4 00024 12,550.10
HRS - D -267 -A4 00025 22,116.60
HRS - D -273 -A4 00026 22,852.05
HRS - D -285 -A4 00027 23,878.60
Item name Article no. Price HRS - D -326 -A4 00028 25,425.00
Ø D [mm] 0311.050- [EUR/100 items] HRS - D -340 -A4 00029 27,670.45
2 HRS - D - 64 -FV 00030 773.35
HRS - D - 77 -FV 00031 826.80
HRS - D - 80 -FV 00032 835.15
HRS - D - 89 -FV 00033 846.85
HRS - D - 96 -FV 00034 888.60
HRS - D -100 -FV 00035 1,249.40
HRS - D -105 -FV 00036 1,254.40
HRS - D -110 -FV 00037 1,261.10
Lifting systems
HRS - D -116 -FV 00038 1,354.65

HRS - D -125 -FV 00039 1,393.00
3 HRS - D -131 -FV 00040 1,408.10
HRS - D -137 -FV 00041 1,419.75
HRS - D -141 -FV 00042 1,433.10
HRS - D -150 -FV 00043 1,491.60
HRS - D -157 -FV 00044 1,541.70
HRS - D -160 -FV 00045 1,915.85
HRS - D -168 -FV 00046 1,930.90

HRS - D -176 -FV 00047 1,969.30
HRS - D -185 -FV 00048 2,019.40
HRS - D -200 -FV 00049 2,049.40
4 HRS - D -212 -FV 00050 2,256.55
HRS - D -218 -FV 00051 2,256.55
HRS - D -225 -FV 00052 2,338.45
HRS - D -235 -FV 00053 2,383.55
HRS - D -267 -FV 00054 8,974.50
HRS - D -273 -FV 00055 9,021.25
HRS - D -285 -FV 00056 10,252.30
HRS - D -326 -FV 00057 11,209.40
HRS - D -340 -FV 00058 11,875.80
DETAN

HRS - D - 64 -A4 00001 3,420.15
HRS - D - 77 -A4 00002 3,599.50
HRS - D - 80 -A4 00003 3,703.40
HRS - D - 89 -A4 00004 3,900.90
HRS - D - 96 -A4 00005 4,038.65
HRS - D -100 -A4 00006 6,120.40
HRS - D -105 -A4 00007 6,276.35
Framing systems
HRS - D -110 -A4 00008 6,408.90
6 HRS - D -116 -A4

HRS - D -125 -A4
00009
00010
6,611.60
6,853.30
HRS - D -131 -A4 00011 6,996.20
HRS - D -137 -A4 00012 7,087.20
HRS - D -141 -A4 00013 7,289.90
HRS - D -150 -A4 00014 7,464.05
HRS - D -157 -A4 00015 7,664.15
HRS - D -160 -A4 00016 9,951.10
Bolts, accessories
HRS - D -168 -A4 00017 10,252.60

HRS - D -176 -A4 00018 10,499.50
7 HRS - D -185 -A4

HRS - D -200 -A4
00019
00020
10,840.05
11,086.90
HRS - D -212 -A4 00021 11,468.95
132
h a l f e n p i p e c l a m p s , p i p e s u pp o r t s
HRS - G HRS-G Gamma pipe clamp

Gamma pipe clamp - Continuation of previous page -
Ø D [mm] 0311.060- [EUR/100 items]
HRS - G -116 -A4 00009
1
HRS - G -125 -A4 00010
HRS - G -131 -A4 00011
HRS - G -137 -A4 00012
Item name Article no. Price HRS - G -141 -A4 00013
Ø D [mm] 0311.060- [EUR/100 items] HRS - G -150 -A4 00014
FV = hot-dip galvanised HRS - G -157 -A4 00015
HRS - G - 64 -FV 00030 HRS - G -160 -A4 00016
HRS - G - 77 -FV 00031 HRS - G -168 -A4 00017
HRS - G - 80 -FV 00032 HRS - G -176 -A4 00018
upon
2
HRS - G - 89 -FV 00033 HRS - G -185 -A4 00019
request
HRS - G - 96 -FV 00034 HRS - G -200 -A4 00020
HRS - G -100 -FV 00035 HRS - G -212 -A4 00021
HRS - G -105 -FV 00036 HRS - G -218 -A4 00022
HRS - G -110 -FV 00037 HRS - G -225 -A4 00023
HRS - G -116 -FV 00038 HRS - G -235 -A4 00024
HRS - G -125 -FV 00039 HRS - G -267 -A4 00025
Lifting systems
HRS - G -131 -FV 00040 HRS - G -273 -A4 00026
HRS - G -137 -FV 00041
HRS - G -141 -FV 00042
HRS - G -285 -A4
HRS - G -326 -A4
00027
00028 3
HRS - G -150 -FV 00043
upon HRS - G -340 -A4 00029
HRS - G -157 -FV 00044
request
HRS - G -160 -FV 00045
RU K
HRS - G -168 -FV 00046
HRS - G -176 -FV 00047 Pipe rest (polypropylene,
temperature-resistant between

HRS - G -185 -FV 00048
-30 and +90°C)
HRS - G -200 -FV 00049
HRS - G -212 -FV 00050
HRS - G -218 -FV 00051
HRS - G -225 -FV 00052
Item name suitable for pipes n Article no. Price
4
HRS - G -235 -FV 00053
HRS - G -267 -FV 00054 Outer Ø D [mm] [mm] 0316.000- [EUR/item]
HRS - G -273 -FV 00055 RUK - 57 57 38 00001 4.05
HRS - G -285 -FV 00056 RUK - 60 60 38 00002 4.05
HRS - G -326 -FV 00057 RUK - 76 76 38 00003 4.05
HRS - G -340 -FV 00058 RUK - 88 88 75 00004 5.15
RUK - 108 108 75 00005 5.15
SS 316 = stainless steel RUK - 114 114 75 00006 5.15
DETAN
HRS - G - 64 -A4 00001 RUK - 133 133 75 00007 5.15
HRS - G - 77 -A4 00002 RUK - 139 139 75 00008 5.15 5
HRS - G - 80 -A4 00003 RUK - 159 159 140 00009 18.30
HRS - G - 89 -A4 00004 upon RUK - 168 168 140 00010 18.30
HRS - G - 96 -A4 00005 request RUK - 193 193 140 00011 18.30
HRS - G -100 -A4 00006 RUK - 216 216 140 00012 18.30
HRS - G -105 -A4 00007 RUK - 219 219 140 00013 18.30
HRS - G -110 -A4 00008 RUK - 267 267 140 00014 18.30
- continued on next column - RUK - 273 18.30
Framing systems
273 140 00015

easurement D = nominal diameter of pipe clamps, corresponds to outer pipe
M RUK - 318 318 220 00016 31.65
diameter RUK - 323
RUK - 355
323
355
220
220
00017
00018
31.65
31.65
6
RUK - 368 368 220 00019 31.65
RUK - 406 406 220 00020 31.65
RUK - 419 419 220 00021 31.65
RUK - 508 508 220 00022 31.65
RUK - 521 521 220 00023 31.65
Bolts, accessories
133
h a l f e n p i p e s u pp o r t s
RU V
Pipe rest for various pipe diameters

(polypropylene,temperature-
resistant between -30 and +90°C)
1
Item name suitable for pipes n Article no. Price
outer Ø D [mm] [mm] 0317.000- [EUR/item]
RUV - K 25-79 30 00001 3.80
RUV - M 80-269 80 00002 5.65
RUV - G 270-420 120 00003 7.10
HRG
2 Pipe support
HRG-1 HRG-2 HRG-3
Lifting systems
HCS
Spacer clips for sliding pipe support
HRG-4
3
AHS HCS AHS
Item name for pipes outer h Ød Article no. Price

Ø D [mm] [mm] [mm] [EUR/item]

HRG - 1 - ( ) - FV 21.5-185
4 HRG - 2 - ( ) - FV
HRG - 3 - ( ) - FV
176-532
100-532
upon request
0324.000-
AHS -1 -FV 8.0 13 00001 11.40
AHS -2 -FV 10.0 13 00002 11.50
AHS -3 -FV 12.0 13 00003 11.75
AHS -4 -FV 18.0 17 00004 17.20
AHS -5 -FV 15.0 13 00009 upon request
DETAN
5 HCS HRG 4-21 - FV 21.3

0291.040-
00001
HCS HRG 4-33 - FV 33.7 00002
HCS HRG 4-48 - FV 48.3 00003
HCS HRG 4-60 - FV 60.3 00004
HCS HRG 4-76 - FV 76.1 00009
upon request
HCS HRG 4-89 - FV 88.9 00005
HCS HRG 4-116 - FV 114.3 00006
Framing systems
HCS HRG 4-141 - FV 139.7 00007

HCS HRG 4-168 - FV 168.3 00008
6 HCS HRG 4-219 - FV 219.1 00010
0308.040-
HCS AHS 5/1 - FV 00001 upon request

HRG - 1 /- 2 /- 3 -A4 see above
0324.000-
Bolts, accessories
AHS -1 -A4 8.0 13 00005 24.65

AHS -2 -A4 10.0 13 00006 25.55
7 AHS -3 -A4 12.0 13 00007 26.75
AHS -4 -A4 18.0 17 00008 50.80
Measurement D = nominal diameter of pipe clamps, corresponds to outer pipe
diameter
At the time of order, please specify the pipe clamp Ø [mm]
(see pipe clamps HRS-D, page 133).
134
bolts, Accessories

Features Benefits
▪ The right bolt for every type of The fit and load-bearing

capability of each bolt is
1
channel HS
▪ Available in several grades, in both matched to the correct
steel and stainless steel Halfen channels
▪ Head position indicator line allows easy
Highly economical
installation check
Safe assembly
2
Wide product range
HZS
Lifting systems
3
HALFEN bolts
HSR

4
Features Benefits
▪ Simple to use and quick assembly Can be subjected to

▪ Self-cutting special threads loading immediately
DEtAN
▪ Many different interior and exterior 5
Secure and reliable
applications
Wide spectrum of
applications
Framing systems
Specifically designed for

the support of heavy loads
6
Approved by the German
building inspectorate and
HALFEN concrete bolts HCB
approved for fire resis-
tance
bolts, accessories
135
H A L F E N b o lt s
HS 72/48 HS 50/30 HALFEN bolt - Continuation of left column -

HALFEN bolt Item Thread x length l PU Article no. Price

including nut, name [mm] [items] 0350.090- [EUR/100 items]
for channels GV = electro plated, strength class 4.6
1 72/48, 72/49 Standard

head shape
HS 50/30 M12 x
HS 50/30 M12 x
40 GV
50 GV
50
50
00029
00030
178.85
186.55
Note: l
HS 50/30 M12 x 60 GV 50 00031 192.70
Washers ordered
HS 50/30 M12 x 80 GV 50 00032 218.90
seperately.
HS 50/30 M12 x 100 GV 50 00033 268.25
See pages 134 - 144.
HS 50/30 M12 x 125 GV 50 00034 400.80
Item Thread x length l PU Article no. Price HS 50/30 M12 x 150 GV 50 00035 473.35
name [mm] [items] 0350.100- [EUR/100 items] HS 50/30 M12 x 200 GV 25 00036 644.45
FV = hot-dip galvanised, strength class 4.6
HS 72/48 M20 x 50 FV 20 00003 559.60 HS 50/30 M16 x 30 GV 50 00046 209.65
2 HS 72/48 M20 x 75 FV 20 00004 607.50 HS 50/30 M16 x 40 GV 50 00047 214.30
HS 72/48 M20 x 100 FV 15 00005 624.40 HS 50/30 M16 x 50 GV 50 00048 225.10
HS 72/48 M20 x 150 FV 10 00006 807.85 HS 50/30 M16 x 60 GV 25 00049 231.20
HS 72/48 M20 x 200 FV 10 00007 921.90 HS 50/30 M16 x 80 GV 25 00051 263.65
HS 50/30 M16 x 100 GV 25 00052 311.40
HS 72/48 M24 x 50 FV 15 00008 534.95 HS 50/30 M16 x 125 GV 25 00076 400.80
HS 72/48 M24 x 75 FV 15 00009 587.40 HS 50/30 M16 x 150 GV 25 00053 454.80
HS 72/48 M24 x 100 FV 10 00010 659.80 HS 50/30 M16 x 200 GV 25 00054 548.85
Lifting systems
HS 72/48 M24 x 150 FV 10 00011 820.15 HS 50/30 M16 x 300 GV 25 00055 772.40
3 HS 72/48 M24 x 200 FV 10 00012 988.20

HS 50/30 M20 x 35 GV 25 00063 265.15
HS 72/48 M27 x 75 FV 25 00015 764.65 HS 50/30 M20 x 45 GV 25 00064 268.25
HS 72/48 M27 x 100 FV 20 00016 854.10 HS 50/30 M20 x 55 GV 25 00065 285.20
HS 50/30 M20 x 65 GV 25 00066 294.45
HS 72/48 M30 x 75 FV 20 00018 901.90 HS 50/30 M20 x 75 GV 25 00067 311.40
HS 72/48 M30 x 100 FV 15 00019 1,029.85 HS 50/30 M20 x 100 GV 25 00068 360.75
HS 72/48 M30 x 150 FV 15 00020 1,287.35 HS 50/30 M20 x 125 GV 25 00069 479.45
HS 72/48 M30 x 200 FV 5 00021 1,492.40 HS 50/30 M20 x 150 GV 25 00070 556.55
HS 50/30 M20 x 200 GV 10 00071 715.35
4 FV8.8 = hot-dip galvanised, strength class 8.8
GV8.8 = electro plated, strength class 8.8
HS 50/30 M20 x 300 GV 10 00072 942.00
HS 72/48 M20 x 60 FV8.8 20 00022 699.00 FV = hot-dip galvanised, strength class 4.6
HS 72/48 M20 x 75 GV8.8 20 00023 792.80 HS 50/30 M10 x 30 FV 100 00019 203.50
HS 72/48 M20 x 100 GV8.8 15 00024 896.10
HS 50/30 M12 x 30 FV 50 00026 178.85
HS 72/48 M24 x 75 FV8.8 15 00014 829.40
HS 72/48 M24 x 100 GV8.8 10 00025 1,066.75 HS 50/30 M16 x 40 FV 50 00041 214.30
HS 72/48 M24 x 150 GV8.8 10 00026 1,432.05 HS 50/30 M16 x 50 FV 50 00042 225.10
DETAN
HS 50/30 M16 x 100 FV 25 00043 311.40

5 HS 72/48 M27 x 100 FV8.8 20 00017 1,131.60 HS 50/30 M16 x 150 FV 25 00044 454.80
SS 316-50 = stainless steel grade A4-50 HS 50/30 M20 x 55 FV 25 00060 285.20

HS 72/48 M24 x 50 A4-50 15 00001 3,675.00 HS 50/30 M20 x 100 FV 25 00062 360.75
HS 72/48 M24 x 100 A4-50 15 00002 4,931.95
may be used as hot-dip galvanised in accordance with approval Z-21.4-34. GV8.8 = electro plated, strength class 8.8
HS 50/30 HS 50/30 M12 x 45 GV8.8 25 00040 279.10
HS 50/30 M12 x 60 GV8.8 343.80
Framing systems
HALFEN bolt 25 00037

including nut, HS 50/30 M12 x 80 GV8.8 25 00077 365.70
6 for channels
55/42, 52/34,
Standard
HS 50/30 M16 x 40 GV8.8 25 00057 320.65
head shape
54/33, 50/30, HS 50/30 M16 x 60 GV8.8 25 00056 423.90
l Alternative
49/30, 50/40, 486 HS 50/30 M16 x 80 GV8.8 10 00078 457.75
head shape
Note: HS 50/30 M16 x 100 GV8.8 10 00079 544.10
Washers ordered seperately.
Item Thread x length l PU Article no. Price HS 50/30 M20 x 45 GV8.8 25 00074 377.70
name [mm] [items] 0350.090- [EUR/100 items] HS 50/30 M20 x 60 GV8.8 25 00073 462.55
Bolts, accessories
GV = electro plated, strength class 4.6 HS 50/30 M20 x 80 GV8.8 25 00080 532.60
HS 50/30 M10 x 30 GV 100 00020 203.50 HS 50/30 M20 x 100 GV8.8 10 00081 562.75
7 HS 50/30 M10 x 40 GV 100 00021 203.50 HS 50/30 M20 x 150 GV8.8 10 00082 840.25
HS 50/30 M10 x 50 GV 100 00022 206.55 - continued on next column -
HS 50/30 M12 x 30 GV 100 00028 174.20
136
halfen b o lt s
HS 50/30 HALFEN bolt - Continuation of previous page - HS 40/22 HALFEN bolt - Continuation of left column -

Item Thread x length l PU Article no. Price Item Thread x length l PU Article no. Price
name [mm] [items] 0350.090- [EUR/100 items] name [mm] [items] 0350.070- [EUR/100 items]
SS 316-50 = stainless steel grade A4-50 GV = electro plated, strength class 4.6
HS 50/30 M12 x 30 A4-50
HS 50/30 M12 x 40 A4-50
25
25
00001
00002
1,268.95
1,280.95
HS 40/22 M16 x 200 GV
HS 40/22 M16 x 250 GV
25
25
00060
00061
518.00
575.05
1
HS 50/30 M12 x 50 A4-50 25 00003 1,388.85 HS 40/22 M16 x 300 GV 25 00062 696.85
HS 50/30 M12 x 100 A4-50 25 00004 2,089.35 FV = hot-dip galvanised, strength class 4.6
HS 40/22 M12 x 30 FV 100 00029 120.30
HS 50/30 M16 x 30 A4-50 25 00005 2,029.40 HS 40/22 M12 x 50 FV 50 00030 127.95
HS 50/30 M16 x 40 A4-50 25 00006 2,240.50
HS 50/30 M16 x 50 A4-50 25 00007 2,386.85 HS 40/22 M16 x 50 FV 50 00048 185.00
HS 50/30 M16 x 60 A4-50 25 00008 2,427.60 HS 40/22 M16 x 100 FV 25 00049 268.25
HS 50/30 M16 x 80 A4-50 10 00009 3,015.25 GV8.8 =electro plated, strength class 8.8
HS 50/30 M16 x 80 left A4-50 10 00011 3,718.15 HS 40/22 M12 x 45 GV8.8 50 00045 180.35 2
HS 50/30 M16 x 150 A4-50 10 00010 3,600.60 HS 40/22 M12 x 60 GV8.8 50 00042 190.65
HS 40/22 M12 x 80 GV8.8 50 00070 235.45
HS 50/30 M20 x 45 A4-50 25 00012 2,427.60 HS 40/22 M12 x 100 GV8.8 50 00047 305.30
HS 50/30 M20 x 55 A4-50 25 00013 2,607.50
HS 50/30 M20 x 75 A4-50 25 00014 2,974.55 HS 40/22 M16 x 60 GV8.8 25 00071 282.60
HS 50/30 M20 x 100 A4-50 10 00015 3,022.55 HS 40/22 M16 x 80 GV8.8 25 00072 350.00
HS 50/30 M20 x 125 A4-50 10 00016 3,675.00 SS 316-50 = stainless steel grade SS 316-50
Lifting systems
HS 50/30 M20 x 150 A4-50 10 00017 4,200.35 HS 40/22 M10 x 30 A4-50 25 00001 1,626.40
HCR-50 = stainless steel grade HCR-50, with high corrosion resistance
HS 50/30 M16x 50 HCR-50 25 00085
HS 40/22 M10 x 40 A4-50
HS 40/22 M10 x 50 A4-50
25
25
00002
00003
1,662.35
1,727.15 3
upon request
HS 50/30 M16x 80 HCR-50 10 00086
HS 40/22 M12 x 30 A4-50 25 00004 1,098.60
HS 40/22 HS 40/22 M12 x 40 A4-50 25 00005 1,216.25
HALFEN bolt HS 40/22 M12 x 50 A4-50 25 00006 1,321.75
including nut, HS 40/22 M12 x 80 A4-50 25 00007 1,530.45

for channels Standard HS 40/22 M12 x 80 left A4-50 25 00017 1,952.60
40/22, 40/25, 422 head HS 40/22 M12 x 100 A4-50 10 00008 1,686.40
Note: shape HS 40/22 M12 x 150 A4-50 10 00069 2,382.00
HS 40/22 M16 x 30 A4-50 25 00009 1,242.55
4
See pages 143 - 1144.
HS 40/22 M16 x 40 A4-50 25 00010 1,331.35
Item Thread x length l PU Article no. Price HS 40/22 M16 x 50 A4-50 25 00011 1,441.70
name [mm] [items] 0350.070- [EUR/100 items] HS 40/22 M16 x 50 left A4-50 25 00018 2,187.70
GV = electro plated, strength class 4.6 HS 40/22 M16 x 60 A4-50 25 00012 1,504.05
HS 40/22 M10 x 20 GV 100 00020 95.60 HS 40/22 M16 x 80 A4-50 25 00013 1,631.20
HS 40/22 M10 x 30 GV 100 00022 97.15 HS 40/22 M16 x 80 left A4-50 25 00019 3,375.10
HS 40/22 M10 x 40 GV 100 00023 101.75 HS 40/22 M16 x 100 A4-50 10 00014 2,060.65
DETAN
HS 40/22 M10 x 50 GV 100 00024 103.30 HS 40/22 M16 x 150 A4-50 10 00015 2,701.05
HS 40/22 M10 x 60 GV 100 00025 114.05 HS 40/22 M16 x 200 A4-50 10 00016 3,320.00 5
HS 40/22 M10 x 80 GV 50 00027 268.25
HS 40/22 M10 x 100 GV 50 00028 313.00 H S 41 / 41
HALFEN bolt
HS 40/22 M12 x 20 GV 100 00031 118.70 including nut;
HS 40/22 M12 x 30 GV 100 00032 120.30 for bolting to channel
HS 40/22 M12 x 40 GV 50 00033 121.85 back of channels HL 41/83,
HS 40/22 M12 x 50 GV 127.95 HL 41/62;
Framing systems
50 00034
HS 40/22 M12 x 60 GV 50 00035 134.15 for bolting to channel slot
for all channels, system 41.
HS 40/22 M12 x 80 GV
HS 40/22 M12 x 100 GV
50
50
00036
00037
164.95
185.00 alternat. head shape
Note: Washers ordered seperately. 6
→ See pages 143 - 144.
HS 40/22 M12 x 125 GV 50 00038 251.30 Bolts with teeth HZS 41/41
Standard head shape
HS 40/22 M12 x 150 GV 50 00039 342.25 → See page 141
HS 40/22 M12 x 200 GV 25 00040 382.35
HS 40/22 M16 x 30 GV 50 00051 161.90 name [mm] [items] 0323.000- [EUR/100 items]
HS 40/22 M16 x 40 GV 50 00052 172.65 FV = hot-dip galvanised, strength class 4.6
Bolts, accessories
HS 40/22 M16 x 50 GV 50 00053 185.00 HS 41/41 M10 x 35 FV 100 00003 190.40
HS 40/22 M16 x 60 GV 25 00054 188.15 HS 41/41 M12 x 35 FV 100 00004 193.75
HS 40/22 M16 x 80 GV 25 00056 220.45 HS 41/41 M12 x 50 FV 50 00007 207.10 7
HS 40/22 M16 x 100 GV 25 00057 268.25 SS 316 = stainless steel W 1.4571/1.4401 (SS 316)
HS 40/22 M16 x 125 GV 25 00058 319.15 HS 41/41 M10 x 35 A4-50 100 00001 683.15
HS 40/22 M16 x 150 GV 25 00059 403.95 HS 41/41 M12 x 35 A4-50 100 00002 717.75
137
halfen b o lt s
H S 3 8 / 17 HS 38/17 HALFEN bolt - Continuation of left column -


including nut, 30,5 name [mm] [items] 0350.050- [EUR/100 items]
for channels SS 316-70/-50 = stainless steel grade SS 316-70/-50
1 38/17, 36/36,
36/20, 35/50
Standard
head shape
HS 38/17 M12 x 25 A4-70
HS 38/17 M12 x 30 A4-70
50
50
00011
00012
722.00
758.05
Alternative HS 38/17 M12 x 40 A4-70 50 00013 805.95
Note: head shape HS 38/17 M12 x 50 A4-70 50 00014 865.95
HS 38/17 M12 x 50 left A4-50 50 00031 1,211.40
→ See pages 143 - 144.
HS 38/17 M12 x 60 A4-70 50 00015 959.55
Item Thread x length l PU Article no. Price HS 38/17 M12 x 80 A4-70 50 00016 988.30
name [mm] [items] 0350.050- [EUR/100 items] HS 38/17 M12 x 80 left A4-50 50 00032 1,333.75
HS 38/17 M10 x 20 GV 100 00037 87.90 HS 38/17 M12 x 150 A4-50 25 00009 2,108.55
2 HS 38/17 M10 x 30 GV 100 00038 89.40 HS 38/17 M12 x 200 A4-50 25 00010 2,377.25
HS 38/17 M10 x 40 GV 100 00039 95.60
HS 38/17 M10 x 50 GV 100 00040 98.65 HS 38/17 M16 x 25 A4-50 50 00022 976.30
HS 38/17 M10 x 60 GV 100 00041 101.75 HS 38/17 M16 x 30 A4-50 50 00023 1,014.70
HS 38/17 M10 x 80 GV 50 00043 137.25 HS 38/17 M16 x 40 A4-50 50 00024 1,101.10
HS 38/17 M10 x 100 GV 50 00044 171.15 HS 38/17 M16 x 50 A4-50 50 00025 1,218.65
HS 38/17 M10 x 150 GV 50 00045 303.75 HS 38/17 M16 x 50 left A4-50 50 00033 1,585.55
HS 38/17 M16 x 60 A4-50 25 00026 1,295.40
Lifting systems
HS 38/17 M12 x 20 GV 100 00051 94.05 HS 38/17 M16 x 80 A4-50 25 00027 1,489.60
3 HS 38/17 M12 x
HS 38/17 M12 x
30 GV
40 GV
100
50
00052
00053
98.65
101.75
HS 38/17 M16 x 80 left A4-50
HS 38/17 M16 x 100 A4-50
50
25
00035
00028
1,950.25
1,671.95
HS 38/17 M12 x 50 GV 50 00054 106.35 HS 38/17 M16 x 150 A4-50 25 00029 2,600.35
HS 38/17 M12 x 60 GV 50 00055 114.05 HS 38/17 M16 x 200 A4-50 25 00030 3,104.05
HS 38/17 M12 x 80 GV 50 00056 123.35
HS 38/17 M12 x 100 GV 50 00057 198.90 HCR-50 = stainless steel grade HCR-50, with high corrosion resistance
HS 38/17 M12 x 125 GV 50 00058 254.40 HS 38/17 M12x 40 HCR-50 50 00077
upon request
HS 38/17 M12 x 150 GV 25 00059 308.30 HS 38/17 M12x 60 HCR-50 50 00078
HS 38/17 M12 x 200 GV 25 00060 508.75
SS 304-70/-50 = stainless steel quality SS 304-70/-50
4 HS 38/17 M16 x
HS 38/17 M16 x
20 GV
30 GV
50
50
00066
00067
134.15
137.25
HS 38/17 M12 x 30 A2-70
HS 38/17 M12 x 40 A2-70
50
50
00005
00006
542.85
577.55
HS 38/17 M16 x 40 GV 50 00068 138.70 HS 38/17 M12 x 50 A2-70 50 00007 618.60
HS 38/17 M16 x 50 GV 50 00069 152.60
HS 38/17 M16 x 60 GV 50 00070 166.50 HS 38/17 M16 x 30 A2-50 50 00019 793.80
HS 38/17 M16 x 80 GV 25 00071 192.70 HS 38/17 M16 x 40 A2-50 50 00020 871.70
HS 38/17 M16 x 100 GV 25 00072 243.55 HS 38/17 M16 x 50 A2-50 50 00021 1,049.05
HS 38/17 M16 x 125 GV 25 00073 345.35 PU [items] = packaging unit [items]
HS 38/17 M16 x 150 GV 25 00074 403.95
DETAN
HS 38/17 M16 x 200 GV 25 00075 593.50

5
FV = hot-dip galvanised, strength class 4.6
HS 38/17 M10 x 30 FV 100 00036 89.40
HS 38/17 M12 x 30 FV 100 00046 98.65

HS 38/17 M12 x 50 FV 50 00048 106.35
HS 38/17 M16 x 30 FV 50 00061 137.25

Framing systems
HS 38/17 M16 x 40 FV 50 00062 138.70
6 HS 38/17 M16 x 50 FV
HS 38/17 M16 x 100 FV
50
25
00063
00064
152.60
243.55
FV8.8 = hot-dip galvanised, strength class 8.8

HS 38/17 M12 x 70 FV8.8 50 00050 214.30
HS 38/17 M16 x 60 FV8.8 50 00065 288.30

Bolts, accessories
SS 316-70 = stainless steel grade SS 316-70

HS 38/17 M10 x 30 A4-70 50 00001 774.85
7 HS 38/17 M10 x 40 A4-70 50 00002 868.35
HS 38/17 M10 x 50 A4-70 50 00003 897.15
HS 38/17 M10 x 60 A4-70 50 00004 945.15
138
H S 2 8 / 15 HS 28/15 HALFEN bolt - Continuation of left column -

22,5
including nut, name [mm] [items] 0350.020- [EUR/100 items]
for channels SS 316-70/-50 = stainless steel grade SS 316-70/-50
Standard
28/15, 28/28, 26/26
head shape
HS 28/15 M10 x 40 A4-70
HS 28/15 M10 x 50 A4-70
100
100
00016
00017
539.75
580.55
1
Note: Alternative
Washers ordered seperately. HS 28/15 M10 x 50 left A4-50 100 00020 865.95
head shape
See pages 143 - 144. HS 28/15 M10 x 60 A4-70 100 00018 618.85
HS 28/15 M10 x 80 A4-70 100 00019 762.85
Item Thread x length l PU Article no. Price HS 28/15 M10 x 100 A4-50 50 00009 1,005.15
name [mm] [items] 0350.020- [EUR/100 items] HS 28/15 M10 x 125 A4-50 50 00010 1,127.45
HS 28/15 M6 x 15 GV 100 00021 55.50 HS 28/15 M10 x 200 A4-50 50 00012 1,731.90
HS 28/15 M6 x 20 GV 100 00022 55.50
HS 28/15 M6 x 25 GV 100 00023 57.05 HCR-50 = stainless steel grade HCR-50, with high corrosion resistance 2
HS 28/15 M6 x 30 GV 100 00024 58.60 HS 28/15 M10x 30 HCR-50 100 00062
upon request
HS 28/15 M6 x 40 GV 100 00025 60.10 HS 28/15 M10x 50 HCR-50 100 00063
HS 28/15 M6 x 50 GV 100 00026 61.65
HS 28/15 M6 x 60 GV 100 00027 63.25 H S 2 0 / 12
HALFEN bolt
HS 28/15 M8 x 15 GV 100 00028 44.75 including nut,
HS 28/15 M8 x 20 GV 100 00029 44.75 for channel 20/12 Standard
Lifting systems
HS 28/15 M8 x 25 GV 100 00030 46.20 head shape
Note:
HS 28/15 M8
HS 28/15 M8
x 30 GV
x 40 GV
100
100
00031
00032
47.75
52.45
See pages 135 -136.
3
HS 28/15 M8 x 50 GV 100 00033 52.45
HS 28/15 M8 x 60 GV 100 00034 66.30 Item Thread x length l PU Article no. Price
HS 28/15 M8 x 80 GV 100 00035 112.55 name [mm] [items] 0350.010- [EUR/100 items]
HS 28/15 M8 x 100 GV 100 00036 152.60 GV = electro plated, strength class 4.6
HS 28/15 M8 x 150 GV 100 00037 279.55 HS 20/12 M6 x 20 GV 100 00006 49.30

HS 20/12 M6 x 30 GV 100 00007 52.45
HS 28/15 M10 x 15 GV 100 00041 58.60 HS 20/12 M6 x 40 GV 100 00008 55.50
HS 28/15 M10 x 20 GV 100 00042 60.10 HS 20/12 M6 x 50 GV 100 00009 60.10
HS 28/15 M10 x 25 GV
HS 28/15 M10 x 30 GV
100
100
00043
00044
63.25
64.75
HS 20/12 M6 x 60 GV 100 00010 63.25 4
HS 28/15 M10 x 40 GV 100 00046 74.00 HS 20/12 M8 x 15 GV 100 00011 46.20
HS 28/15 M10 x 50 GV 100 00047 80.15 HS 20/12 M8 x 20 GV 100 00012 47.75
HS 28/15 M10 x 60 GV 100 00048 84.75 HS 20/12 M8 x 25 GV 100 00013 49.30
HS 28/15 M10 x 80 GV 100 00049 121.85 HS 20/12 M8 x 30 GV 100 00014 49.30
HS 28/15 M10 x 100 GV 50 00050 163.35 HS 20/12 M8 x 40 GV 100 00015 55.50
HS 28/15 M10 x 125 GV 50 00051 249.75 HS 20/12 M8 x 50 GV 100 00016 60.10
HS 28/15 M10 x 150 GV 50 00052 303.75 HS 20/12 M8 x 60 GV 100 00017 70.95
DETAN
HS 28/15 M10 x 200 GV 50 00053 481.00 HS 20/12 M8 x 80 GV 100 00018 126.40
HS 20/12 M8 x 100 GV 100 00019 175.80 5
HS 28/15 M12 x 30 GV 100 00057 114.05
HS 28/15 M12 x 50 GV 50 00059 123.35 SS 304-70 = stainless steel grade SS 304-70
HS 28/15 M12 x 80 GV 50 00060 135.70 HS 20/12 M8 x 20 A2-70 100 00002 320.10
FV = hot-dip galvanised, strength class 4.6 HS 20/12 M8 x 30 A2-70 100 00003 352.55
HS 28/15 M10 x 30 FV 100 00038 64.75 HS 20/12 M8 x 40 A2-70 100 00004 391.50
HS 28/15 M10 x 50 FV 100 00039 80.15 HS 20/12 M8 x 50 A2-70 100 00005 452.05
Framing systems
HS 28/15 M10 x 40 FV 8.8 100 00040 137.25 HSR 72/48

HS 28/15 M8 x 30 A2-70 100 00002 372.00
HALFEN nibbed bolt
including nut,
6
for channel 72/48
HS 28/15 M10 x 20 A2-70 100 00004 376.35 Kerbzahn
nib
Note:
HS 28/15 M10 x 25 A2-70 100 00005 387.20
HS 28/15 M10 x 30 A2-70 100 00006 406.70 See pages 143 - 144.
HS 28/15 M10 x 40 A2-70 100 00007 441.30
HS 28/15 M10 x 50 A2-70 100 00008 473.65
Bolts, accessories

HS 28/15 M8 x 30 A4-70 100 00003 443.80
name [mm] [items]
0351.100- [EUR/100 items]
7
HS 28/15 M10 x 20 A4-70 100 00013 455.80
HS 28/15 M10 x 25 A4-70 100 00014 477.35 HSR 72/48 M20 x 75 FV8.8 20 00002 1,015.15
HS 28/15 M10 x 30 A4-70 100 00015 498.95 PU [items] = packaging unit [items]
139
HSR 50/30 HZS 38/23 032

HALFEN nibbed bolt HALFEN bolt,

including nut, with teeth,
for channels including nut,
1 52/34, 50/30 Nib for channel 38/23

DYNAGRIP Teeth
Note: Note:
Washers ordered seperately. Washers ordered seperately.
See pages 143 - 144. See pages 143 - 144.
Item Thread x length l PU Article no. Price Item Thread x length l PU Article no. Price
name [mm] [items] 0351.090- [EUR/100 items] name [mm] [items] 0352.060- [EUR/100 items]
FV8.8 = hot-dip galvanised, strength class 8.8 GV8.8 = electro plated*), strength class 8.8
HSR 50/30 M16 x 40 FV8.8 50 00001 342.25 HZS 38/23 M 12 × 30 GV8.8 100 00001 235.90
HZS 38/23 M 12 × 40 GV8.8 50 00002 242.00
2 GV8.8 = electro plated, strength class 8.8 HZS 38/23 M 12 × 50 GV8.8 50 00003 254.40
HSR 50/30 M16 x 60 GV8.8 25 00002 386.95 HZS 38/23 M 12 × 60 GV8.8 50 00004 260.55
HZS 38/23 M 12 × 80 GV8.8 50 00005 408.55
HSR 50/30 M20 x 45 GV8.8 25 00003 440.90 HZS 38/23 M 12 × 100 GV8.8 50 00006 541.15
HSR 50/30 M20 x 60 GV8.8 25 00004 482.60 HZS 38/23 M 12 × 125 GV8.8 50 00007 769.30
HSR 50/30 M20 x 75 GV8.8 25 00005 539.65 HZS 38/23 M 12 × 150 GV8.8 50 00008 854.10
HZS 38/23 M 12 × 200 GV8.8 - 00009
upon request
HSR 40/22 HZS 38/23 M 12 × 300 GV8.8 - 00010
Lifting systems
HALFEN nibbed bolt 32,5
3 including nut,
for channel 40/22
HZS 38/23
HZS 38/23
M 16 × 30
M 16 × 40
GV8.8
GV8.8
50
50
00011
00012
282.10
300.65
HZS 38/23 M 16 × 50 GV8.8 50 00013 313.00
Nib HZS 38/23 M 16 × 60 GV8.8 328.40
25 00014
Note: HZS 38/23 M 16 × 80 GV8.8 25 00015 383.90
Washers ordered seperately. HZS 38/23 M 16 × 100 GV8.8 25 00016 408.55
See pages 143 - 144. HZS 38/23 M 16 × 125 GV8.8 25 00017 541.15
Item Thread x length l PU Article no. Price HZS 38/23 M 16 × 150 GV8.8 25 00018 1,019.05
name [mm] [items] 0351.070- [EUR/100 items] HZS 38/23 M 16 × 200 GV8.8 25 00019 1,219.55
GV8.8 = electro plated, strength class 8.8 HZS 38/23 M 16 × 300 GV8.8 25 00020 1,698.95
4 HSR 40/22 M16 x 40 GV8.8
HSR 40/22 M16 x 60 GV8.8
50
25
00001
00002
302.20
342.25 SS 316-70 = stainless steel grade SS 316-70
HZS 38/23 M16 x 60 A4 - 70 25 00021 1,203.30
H Z S 41 / 2 2 HZS 38/23 M16 x 80 A4 - 70 25 00022 1,343.45
HALFEN bolt, with teeth,
including nut, 34,5 HS 38/23
for channels HZA 41/22, HALFEN DYNAGRIP bolt
HZM, HZL 41/22 and including nut,
41/41 Teeth for channel 38/23
DETAN
5 Note:
Standard
head shape
Washers ordered seperately. Note:
Alternative
See pages 143 - 144. Washers ordered seperately. head shape
GV4.6 = electro plated *), strength class 4.6
HZS 41/22 M12 x 35 FV8.8 100 00001 282.10
HS 38/23 M 16 × 30 GV4.6 50 00001 178.85
HZS 41/22 M12 x 50 FV8.8 100 00002 306.75
Framing systems
HS 38/23 M 16 × 40 GV4.6 50 00002 180.35

HS 38/23 M 16 × 50 GV4.6 50 00003 198.90
6 HZS 41/22 M16 x 50 FV8.8
HZS 41/22 M16 x 100 FV8.8
25
25
00003
00004
470.20
652.15
HS 38/23 M 16 × 60 GV4.6 25 00004 217.35
HS 38/23 M 16 × 80 GV4.6 25 00005 251.30
HS 38/23 M 16 × 100 GV4.6 25 00006 317.60
HS 38/23 M 16 × 125 GV4.6 25 00007 448.70
HZS 41/22 M12 x 35 A4-50 25 00005 1,794.30
HS 38/23 M 16 × 150 GV4.6 25 00008 525.70
HZS 41/22 M12 x 50 A4-50 25 00006 1,916.65
HS 38/23 M 16 × 200 GV4.6 25 00009 770.85
HZS 41/22 M12 x 80 A4-50 25 00007 1,995.85
*) Special electro plating for anhanced corrosion protection.
May be used as hot-dip galvanised in accordance with approval
Bolts, accessories
HZS 41/22 M16 x 35 A4-50 25 00008 1,631.20 in Appendix 5.

HZS 41/22 M16 x 50 A4-50 25 00009 1,940.60
140
halfen b o lt s , channel n u t s
HZS 29/20 GWP 72/48

HALFEN bolt, with teeth HALFEN channel nut
including nut, for channels 72/48, 72/49
for channel 29/20
DYNAGRIP
1
Teeth
Note:
Item Thread x length l PE Bestell-Nr. Preis Item name PU Article no. Price
name [mm] [items] 0352.040- [EUR/100 items] Thread [items] 0380.090- [EUR/100 items]
GV8.8 = electro plated*), strength class 8.8 GV = electro plated
HZS 29/20 M 12 × 30 GV8.8 100 00001 180.35 GWP 72/48 M12 - GV 50 00001 473.35
HZS 29/20 M 12 × 40 GV8.8 50 00002 194.25 GWP 72/48 M16 - GV 50 00002 473.35
HZS 29/20 M 12 × 50 GV8.8 50 00003 209.65 GWP 72/48 M20 - GV 50 00003 473.35 2
HZS 29/20 M 12 × 60 GV8.8 50 00004 212.80
HZS 29/20 M 12 × 80 GV8.8 50 00005 249.75 SS 316 = stainless steel grade SS 316
HZS 29/20 M 12 × 100 GV8.8 50 00006 303.75 GWP 72/48 M12 - A4 50 00006 2,993.70
HZS 29/20 M 12 × 125 GV8.8 50 00007 420.90 GWP 72/48 M16 - A4 50 00007 2,993.70
HZS 29/20 M 12 × 150 GV8.8 50 00008 798.60 GWP 72/48 M20 - A4 50 00008 2,993.70
HZS 29/20 M 12 × 200 GV8.8 25 00009 959.00
HZS 29/20 M 12 × 250 GV8.8 25 00010 1,127.00 GWP 50/30
Lifting systems
HZS 29/20 M 12 × 300 GV8.8 25 00011 1,356.70 HALFEN channel nut
*) See explanation provided under HALFEN bolt HS 29/20 right at the bottom
HS 29/20
for channels 52/34, 54/33,
50/30, 49/30, 50/40 3
HALFEN bolt,
including nut,
for channel 29/20
DYNAGRIP Item name d PU Article no. Price
Thread [mm] [items] 0380.070- [EUR/100 items]

Note:
Washers ordered seperately. GV = electro plated
See pages 143 - 144. GWP 50/30 M8 - GV 12 100 00001 174.20
Item Thread x length l PU Article no. Price GWP 50/30 M10 - GV 12 100 00002 174.20
name [mm]
GV4.6 = electro plated*), strength class 4.6
[items] 0350.040- [EUR/100 items] GWP 50/30 M12 - GV
GWP 50/30 M16 - GV
12
12
100
100
00003
00004
174.20
203.50
4
HS 29/20 M 12 × 30 GV4.6 100 00001 148.00
HS 29/20 M 12 × 40 GV4.6 50 00002 151.05 SS 316 = stainless steel grade SS 316
HS 29/20 M 12 × 50 GV4.6 50 00003 158.80 GWP 50/30 M8 - A4 12 100 00007 1,084.25
HS 29/20 M 12 × 60 GV4.6 50 00004 174.20 GWP 50/30 M10 - A4 12 100 00008 1,084.25
HS 29/20 M 12 × 80 GV4.6 50 00005 175.80 GWP 50/30 M12 - A4 12 100 00009 1,084.25
HS 29/20 M 12 × 100 GV4.6 50 00006 274.40 GWP 50/30 M16 - A4 12 100 00010 1,084.25
HS 29/20 M 12 × 125 GV4.6 50 00007 766.25
GWP 40/22
DETAN
HS 29/20 M 12 × 150 GV4.6 50 00008 843.25
*) Special electro plating for enhanced corrosion protection. HALFEN channel nut 5
May be used as hot-dip galvanised in accordance with approval for channels 40/22, 40/25
in Appendix 5.
H Z S 41 / 41
HALFEN bolt without nut (ordered separately),
for channels 41/22, 41/41, Item name d PU Article no. Price
41/62, 41/83 Thread [mm] [items] 0380.050- [EUR/100 items]
GV = electro plated
Framing systems
Note: GWP 40/22 M5 - GV 10 100 00001 138.70

teeth
GWP 40/22 M6 - GV
GWP 40/22 M8 - GV
10
10
100
100
00002
00003
138.70
138.70
6
Item Thread x length l Article no. Price GWP 40/22 M10 - GV 10 100 00004 138.70
name [mm] 0323.010- [EUR/100 items] GWP 40/22 M12 - GV 11.5 100 00005 152.60
GV = electro plated, strength class 4.6
HZS 41/41 M 8 x 30 GV 00001 360.80 SS 316 = stainless steel grade SS 316
HZS 41/41 M 8 x 50 GV 00002 379.20 GWP 40/22 M8 - A4 10 100 00010 1,048.25
HZS 41/41 M 10 x 30 GV 00003 365.80 GWP 40/22 M10 - A4 10 100 00011 1,048.25
Bolts, accessories
HZS 41/41 M 10 x 50 GV 00004 389.15 GWP 40/22 M12 - A4 11.5 100 00012 1,074.65
HZS 41/41 M 12 x 30 GV 00005 387.45 not for channel 41/22
HZS 41/41 M 12 x 50 GV 00006 419.25 30 mm width, fit from the channel end 7
HZS 41/41 M 12 x 75 GV 00007 461.00 without teeth
HZS 41/41 M 12 x 100 GV 00008 492.70
HZS 41/41 M 16 x 63 GV 00009 778.35
HZS 41/41 M 16 x 102 GV 00010 920.30
141
halfen b o lt s , channel n u t s
GWP 50/40 G W P 41 / 41 S N
HALFEN channel nut HALFEN channel nut

Spring Ø:
for channels 50/40, 486 with spring
15 mm (shape A)
for channel 41/22 (D)
or 21 mm (shape B)
1 Delivery subject to confirmation
Item name d b Article no. Price

Item name PU Article no. Price Thread [mm] [mm] 0322.040- [EUR/100 items]
Thread [items] 0380.080- [EUR/100 items] GV = electro plated
GV = electro plated GWP 41/41 SN M6 GV 6 20 00001 93.55
GWP 50/40 M6 - GV 100 00001 83.65 GWP 41/41 SN M8 GV 8 20 00002 103.55
GWP 50/40 M8 - GV 100 00002 83.65 GWP 41/41 SN M10 GV 9 20 00003 103.05
GWP 50/40 M10 - GV 100 00003 83.65 GWP 41/41 SN M12 GV 9 20 00004 115.30
GWP 50/40 M12 - GV 100 00004 83.65
2 GWP 50/40 M16 - GV 100 00005 83.65 G W P 41 / 2 2
HALFEN channel nut, with teeth,
SS 316 = stainless steel grade SS 316 for channels 41/22, 41/41
GWP 50/40 M8 - A4 100 00007 592.45
GWP 50/40 M10 - A4 100 00008 592.45
GWP 50/40 M12 - A4 100 00009 623.65
GWP 50/40 M16 - A4 100 00010 623.65
Lifting systems
G W P 41 / 41 Thread [items] 0380.060- [EUR/100 items]
3 HALFEN channel nut

for channels 41/41 (D),
GV = electro plated
GWP 41/22 M6 - GV 100 00001 192.70
41/62 (D), 41/83 GWP 41/22 M8 - GV 100 00002 192.70
and channels )* GWP 41/22 M10 - GV 100 00003 192.70
41/22, 41/22 D: GWP 41/22 M12 - GV 100 00004 218.90
*) Only M 6 to M10, GWP 41/22 M16 - GV 100 00005 218.90
for M12 only
type 41/41 F is suitable (flat shape)

Item name d b Article no. Price GWP 41/22 M8 - A4 100 00006 1,189.80
Thread [mm] [mm] 0322. [EUR/100 items] GWP 41/22 M10 - A4 100 00007 1,209.00
4 GV = electro plated
GWP 41/41 M6 GV 6 20 010-00001 55.15
GWP 41/22 M12 - A4
GWP 41/22 M16 - A4
100
100
00008
00009
1,230.65
1,230.65
GWP 41/41 M8 GV 8 20 010-00003 60.15
GWP 41/41 M10 GV 9 20 010-00006 60.15 G W P 3 8 / 17
GWP 41/41 M12 GV 11 20 010-00009 71.85 HALFEN threaded plate,
GWP 41/41 F M12 GV 9 20 020-00002 60.15 for channels 38/17, 36/20,
GWP 41/41 M16 GV 12 30 010-00010 218.85 35/50, 36/36

DETAN
GWP 41/41 M6 A4 6 20 010-00002 356.05 Item name PU Article no. Price

5 GWP 41/41 M8 A4 8 20 010-00004 356.05 Thread [items] 0380.040- [EUR/100 items]
GWP 41/41 M10 A4 9 20 010-00007 467.85 GV = electro plated
GWP 41/41 F M12 A4 9 20 020-00003 467.85 GWP 38/17 M6 - GV 100 00001 63.25
GWP 41/41 M16 A4 12 30 010-00011 1,354.10 GWP 38/17 M8 - GV 100 00002 63.25
GWP 38/17 M10 - GV 100 00003 63.25
G W P 41 / 41 S H GWP 38/17 M12 - GV 100 00004 63.25
HALFEN channel nut
Framing systems
with spiral spring at top

for channel 41/41 (D) GWP 38/17 M6 - A4 100 00009 578.10
6 GWP 38/17 M8 - A4
GWP 38/17 M10 - A4
100
100
00010
00011
578.10
578.10
GWP 38/17 M12 - A4 100 00012 578.10
Item name d b Article no. Price
Thread [mm] [mm] 0322.030- [EUR/100 items]
GV = electro plated
GWP 41/41 SH M6 GV 6 20 00001 93.55
GWP 41/41 SH M8 GV 8 20 00002 98.50
Bolts, accessories
GWP 41/41 SH M10 GV 9 20 00003 98.50

GWP 41/41 SH M12 GV 11 20 00004 110.25
7
142
halfen b o lt s , channel n u t s , acce s s o rie s
GWP 35/50 MU

HALFEN channel nut Hexagonal nuts
for channel 35/50 DIN 934 or DIN EN 24032

1
Thread [items] 0360. [EUR/100 items]
Thread [items] 0380.030- [EUR/100 items] MU M 6 GV DIN 934/EN 24032 1000 020-00001 1.55
GV = electro plated MU M 8 GV DIN 934/EN 24032 1000 030-00001 3.10
GWP 35/50 M 8 - GV 400 00001 60.10 MU M 10 GV DIN 934/EN 24032 500 040-00001 7.70
MU M 20 GV DIN 934/EN 24032 100 080-00001 41.65
G W P 2 8 / 15 MU M 24 GV DIN 934/EN 24032 50 090-00001 81.70 2
for channels 28/28, M6, M8 M10
28/15, 28/12, SS 304 = stainless steel grade SS 304
26/26, 26/18 MU M 8 A2 DIN 934/EN 24032 1000 030-00002 11.90
MU M 10 A2 DIN 934/EN 24032 500 040-00002 28.60
MU M 12 A2 DIN 934/EN 24032 500 050-00003 42.80
MU M 16 A2 DIN 934/EN 24032 200 070-00003 80.90
Assembly instructions for M6, M8: Assembly instructions for M10:
Insert channel nuts through channel First insert channel nut in
Lifting systems
slot at an angle channel, then screw in SS 316 = stainless steel grade SS 316
threaded rod MU M 6 A4 DIN 934/EN 24032
MU M 8 A4 DIN 934/EN 24032
1000
1000
020-00002
030-00003
7.15
14.40 3
Item name PU Article no. Price MU M 10 A4 DIN 934/EN 24032 500 040-00003 31.15
Thread [items] 0380.020- [EUR/100 items] MU M 12 A4 DIN 934/EN 24032 500 050-00004 48.00
GV = electro plated MU M 16 A4 DIN 934/EN 24032 200 070-00004 88.75
GWP 28/15 M 6 - GV 200 00003 29.35 MU M 20 A4 DIN 934/EN 24032 100 080-00003 167.90
GWP 28/15 M 8 - GV 200 00004 29.35

GWP 28/15 M 10 - GV 200 00005 66.30 US D I N 12 5
Washers DIN 125
GWP 28/15 M 6 - A4
GWP 28/15 M 8 - A4
200
200
00006
00007
381.40
381.40
4
GWP 28/15 M 10 - A4 200 00008 381.40 Item name PU Article no. Price
Thread [items] 0370. [EUR/100 items]
G W P 2 0 / 12 FV = hot-dip galvanised
HALFEN channel nut US - M 10 - FV DIN 125 1000 040-00006 5.60
for channel 20/12 US - M 12 - FV DIN 125 500 050-00008 7.70
US - M 16 - FV DIN 125 500 070-00007 14.05
DETAN
Thread [items] 0380.010- [EUR/100 items] US - M 6 - GV DIN 125 1000 020-00002 1.55 5
GV = electro plated US - M 8 - GV DIN 125 1000 030-00003 3.10
GWP 20/12 M 5 - GV 200 00002 27.75 US - M 10 - GV DIN 125 1000 040-00003 4.60
GWP 20/12 M 6 - GV 200 00003 27.75 US - M 12 - GV DIN 125 500 050-00004 6.20
US - M 16 - GV DIN 125 500 070-00003 10.80
SS 316 = stainless steel grade SS 316 US - M 20 - GV DIN 125 200 080-00002 20.10
GWP 20/12 M 5 - A4 200 00004 326.20 US - M 24 - GV DIN 125 200 090-00001 27.75
GWP 20/12 M 6 - A4 200 00005 326.20 US - M 27 - GV DIN 125 100 100-00001 50.85
Framing systems
PU [items] = packaging unit [items] US - M 30 - GV DIN 125 100 110-00001 66.30

6
US - M 8 - A2 DIN 125 1000 030-00005 7.15
US - M 10 - A2 DIN 125 1000 040-00005 11.90
US - M 12 - A2 DIN 125 500 050-00006 21.45
US - M 16 - A2 DIN 125 500 070-00005 40.40

Bolts, accessories
US - M 6 - A4 DIN 125 1000 020-00003 7.15

US - M 8 - A4 DIN 125 1000 030-00004 12.00
US - M 10 - A4 DIN 125 1000 040-00004 19.15 7
US - M 12 - A4 DIN 125 500 050-00005 31.15
US - M 16 - A4 DIN 125 500 070-00004 57.60
US - M 20 - A4 DIN 125 200 080-00003 105.50
143
Acce s s o rie s
US D I N 4 4 0 / 9 0 21 GWS
Washers DIN 440/9021 Threaded rods
1 Item name PU Article no. Price Item name Article no. Price
Thread [items] 0370. [EUR/100 items] Thread x length [mm] 0400. [EUR/100 items]
US M 6 GV DIN 440 200 020-00001 4.60 GWS M 6 x 1000 GV 020-00001 83.25

2 US M 20 GV DIN 440 100 080-00001 83.25 GWS M 24 x 1000 GV 080-00001 1,051.45
SS 316 = stainless steel grade SS 316 SS 316 = stainless steel grade SS 316
US M 8 A4 DIN 9021 100 030-00002 23.95 GWS M 6 x 1000 A4 020-00002 611.70
US M 10 A4 DIN 9021 100 040-00002 45.60 GWS M 8 x 1000 A4 030-00002 949.90
US M 12 A4 DIN 9021 100 050-00003 105.50 GWS M 10 x 1000 A4 040-00002 1,489.60
US M 16 A4 DIN 9021 100 070-00002 153.50 GWS M 12 x 1000 A4 050-00002 2,245.25
GWS M 16 x 1000 A4 060-00002 3,679.75
Lifting systems
V US GWS M 20 x 1000 A4 070-00002 5,598.80
3 Square washers
HSK
Shape A Shape B Hexagonal head bolts
DIN 933/ISO 4017
(without nuts)
Item Shape a x b x d Article no. Price

name Thread [mm] 0371. [EUR/100 items]

VUS 40/25 M 10 -FV A 40x40x5 000-00001 111.05 Item name S (DIN) S (ISO) Article no. Price
4 VUS 40/25 M 12 -FV
VUS 40/25 M 16 -FV
A
A
40x40x5
40x40x5
000-00002
000-00003
111.05
111.05
Thread x length [mm]
GV = electro plated
[mm] [mm] 0385. [EUR/100 items]
VUS 41/41 M 6 -FV A 40x40x6 010-00004 55.50 HSK M 6 x 12 GV 8.8 10 10 020-00005 4.60
VUS 49/30 M 10 -FV B 37x37x5 000-00004 146.50 HSK M 8 x 40 GV 8.8 13 13 030-00006 12.35
DETAN
5 VUS 52/34 M 20 -FV A 50x50x6 000-00009 155.70 HSK M 10 x 70 GV 8.8 17 16 040-00013 46.20
HSK M 12 x 50 GV 8.8 19 18 050-00016 30.85
SS 316 = stainless steel grade SS 316 HSK M 12 x 60 GV 8.8 19 18 050-00017 38.50
VUS 40/25 M 10 -A4 A 40x40x5 000-00015 261.50 HSK M 12 x 80 GV 8.8 19 18 050-00018 78.65
Framing systems
VUS 40/25 M 12 -A4 A 40x40x5 000-00016 261.50 HSK M 12 x 90 GV 8.8 19 18 050-00019 94.05
6 VUS 40/25 M 16 -A4

VUS 41/41 M 6 -A4
A
A
40x40x5
40x40x6
000-00017
010-00001
261.50
340.65
HSK M 16 x 40 GV 8.8
HSK M 16 x 60 GV 8.8
24
24
24
24
070-00015
070-00017
52.45
74.00
VUS 41/41 M 10 -A4 A 40x40x6 010-00002 340.65
VUS 41/41 M 12 -A4 A 40x40x6 010-00003 340.65 SS 316 = stainless steel grade SS 316
VUS 49/30 M 10 -A4 B 37x37x5 000-00020 323.80 HSK M 8 x 25 A4 13 13 030-00002 43.25
VUS 49/30 M 12 -A4 B 37x37x5 000-00021 323.80 HSK M 10 x 30 A4 17 16 040-00003 81.55
VUS 49/30 M 16 -A4 B 37x37x5 000-00022 323.80 HSK M 10 x 45 A4 17 16 040-00005 103.10
VUS 49/30 M 20 -A4 B 37x37x5 000-00023 323.80 HSK M 12 x 25 A4 19 18 050-00002 119.90
Bolts, accessories
VUS 52/34 M 16 -A4 A 50x50x6 000-00024 393.40 HSK M 12 x 30 A4 19 18 050-00003 119.90

VUS 52/34 M 20 -A4 A 50x50x6 000-00025 393.40 HSK M 12 x 40 A4 19 18 050-00004 134.30
7 VUS 72/49 M 20 -A4 B 54x54x6 000-00026 467.80 HSK M 12 x 60 A4 19 18 050-00006 189.55
VUS 72/49 M 24 -A4 B 54x54x6 000-00027 467.80 HSK M 12 x 80 A4 19 18 050-00008 290.25
VUS 72/49 M 27 -A4 B 54x54x6 000-00028 467.80 HSK M 16 x 40 A4 24 24 070-00002 304.65
VUS 72/49 M 30 -A4 B 54x54x6 000-00029 467.80 HSK M 16 x 60 A4 24 24 070-00004 371.85
PU [items] HSK M 16 x 90 A4 24 24 070-00007 513.35
144
Acce s s o rie s
SIC SPH

Locking washers Turnbuckles with
To prevent HALFEN right- and left-hand thread
bolts from rotating out of with view hole
channel unscrewing during
assembly
1
Item suitable for HALFEN Thread Article no. Price Item name Article no. Price
name bolt type HS Ø 0372.000- [EUR/100 items] Thread x length L [mm] 0392.000- [EUR/100 items]
GV = electro plated SS 316 = stainless steel grade SS 316
SIC - 50/30 - GV 50/30 M16, M20 00006 40.10 SPH M 12 x 60 A4 00001 937.95
SIC - 40/22 - GV 38/17, 40/22 M16 00007 32.40 SPH M 12 x 75 A4 00002 976.30
SIC - 38/17 - GV 38/17, 40/22 M10, M12 00008 32.40 SPH M 12 x 95 A4 00003 1,014.70
SIC - 38/23 - GV 38/23 Dynagrip M16 00011 55.50 SPH M 12 x 115 A4 00004 1,060.25
SIC - 29/19 - GV 29/20 Dynagrip M12 00012 55.50 SPH M 12 x 135 A4 00005 1,098.60
SIC - 28/15 - GV 28/15 M8, M10 00009 26.20 2
SIC - 20/12 - GV 20/12 M8 00010 23.10 SPH M 16 x 60 A4 00006 1,273.75
SPH M 16 x 75 A4 00007 1,364.90
SS 316 = stainless steel grade SS 316 SPH M 16 x 95 A4 00008 1,487.20
SIC - 50/30 - A4 50/30 M16, M20 00001 232.65 SPH M 16 x 115 A4 00009 1,609.65
SIC - 40/22 - A4 38/17, 40/22 M16 00002 175.15 SPH M 16 x 135 A4 00010 1,731.90
SIC - 38/17 - A4 38/17, 40/22 M10, M12 00003 175.15
SIC - 28/15 - A4 28/15 M8, M10 00004 88.75 OES
Lifting systems
SIC - 20/12 - A4 20/12 M8 00005 76.80 Eye sleeves
SKM 3
Hexagonal
coupler sleeves
Item name L d PU Article no. Price
Thread [mm] [mm] [items] 0401.000- [EUR/100 items]
GV = electro plated

Item name s L PU Article no. Price OES M 6 GV 35 6 250 00001 70.95
Thread [mm] [mm] [items] 0390.000- [EUR/100 items] OES M 8 GV 57 8 300 00002 83.25
FV = hot-dip galvanised OES M 10 GV 57 10 225 00003 87.90
SKM M 10 FV
SKM M 12 FV
13
17
40
40
100
50
00004
00005
141.85
164.95
OES M 12 GV
OES M 16 GV
57
80
12
16
200
60
00004
00005
95.60
203.50
4
SKM M 16 FV 22 50 25 00006 252.85
RM
SS 316 = stainless steel grade SS 316 Ring nuts DIN 582
SKM M 10 A4 13 40 100 00001 995.50
SKM M 12 A4 17 40 50 00002 1,180.15
SKM M 16 A4 22 50 25 00003 1,708.00
VBM
DETAN
Coupler sleeves, Thread [items] 0402.050- [EUR/100 items] 5
round GV = electro plated
RM M 8 GV DIN 582 100 00001 181.90
RM M 10 GV DIN 582 100 00002 240.50
RM M 12 GV DIN 582 50 00003 311.40
Item name D L PU Article no. Price RM M 16 GV DIN 582 50 00004 451.70
Thread [mm] [mm] [items] 0391.000- [EUR/100 items] RM M 20 GV DIN 582 20 00005 593.50
GV = electro plated
Framing systems
VBM M 6 GV 10 15 100 00007 30.85 K US

VBM M 8 GV
VBM M 10 GV
12
13
20
25
100
100
00008
00009
43.20
69.40
U-clamp plate
for channels
Installation diagram: 6
VBM M 12 GV 16 30 50 00010 111.05 41/62, 41/83 Channel, e.g.
VBM M 16 GV 21 40 50 00011 175.80 HM 41/83
VBM M 20 GV 26 50 25 00012 306.75
KUS
VBM M 6 A4 10 15 100 00001 386.20
Bolts, accessories
VBM M 8 A4 14 20 100 00002 393.40 Item name Article no. Price

VBM M 10 A4 16 25 100 00003 568.55 0314.000- [EUR/100 items]
VBM M 12 A4 20 30 50 00004 801.15 FV = hot-dip galvanised 7
VBM M 16 A4 25 40 50 00005 1,475.25 KUS FV 00001 173.70
VBM M 20 A4 32 50 25 00006 2,941.00 SS 316 = stainless steel grade SS 316
PU [items] = packaging unit [items] KUS A4 00002 402.75
145
Beam clamp, rail clip s , b rick t ie anch o r
TK ML
HALFEN beam clamp Note: Beam clamps HALFEN brick tie anchor Assembly
including cup-shaped plate System 41 → Page 123 suitable for brick tie channels diagram:
l
HMS 25/15D and l
1 channel 28/15

ML - 85 - FV 200 00004 51.40
Item name PU Article no. Price ML - 120 - FV 200 00005 58.90
[items] 0308.030- [EUR/item] ML - 180 - FV 200 00006 83.20

HCS - TK - FV 20 00001 8.60 SS 316 = stainless steel grade SS 316
2 ML - 85 - A4 200 00001 235.40
KLP-S ML - 120 - A4 200 00002 287.75
Rail clip, ML - 180 - A4 200 00003 354.55
forged
MLQ
HALFEN brick tie anchor suitable for brick tie channels
HMS 25/15 D and channel 28/15
Lifting systems
Item name Heel width Øf Article no. Price
N [mm] [mm] 0325.010- [EUR/100 items]
KLP - no. 10 - FV 16 18 00001 424.25

KLP - no. 26 - FV without heel 18 00002 845.15 MLQ-D = double-sided MLQ-E = one-sided
KLP - no. 20 - FV 20 22 00003 592.90
KLP - no. 30 - FV without heel 22 00004 861.85 Item name Article no. Price
KLP - no. 40 - FV 22 29 00005 1,105.80 l [mm] 0132. [EUR/100 items]
KLP - no. 50 - FV without heel 29 00006 1,165.85 FV = hot-dip galvanised

MLQ - D - 85 - FV 020-00004 737.20
KLP-60 MLQ - D - 120 - FV 020-00005 745.55
4 Rail clip, MLQ - D - 180 - FV 020-00006 761.40
(previously
DIN 3568) MLQ - E - 85 - FV 030-00004 624.05
MLQ - E - 120 - FV 030-00005 633.40
MLQ - E - 180 - FV 030-00006 647.45
Item name h Article no. Price SS 316 = stainless steel grade SS 316
[mm] 0325.020- [EUR/100 items] MLQ - D - 85 - A4 020-00001 1,430.20
FV = hot-dip galvanised MLQ - D - 120 - A4 020-00002 1,469.65
DETAN
KLP - 60/ 10 - FV 10 00001 634.70 MLQ - D - 180 - A4 020-00003 1,534.90

5 KLP - 60/ 12 - FV 12 00002 656.40
KLP - 60/ 14 - FV 14 00003 668.10 MLQ - E - 85 - A4 030-00001 1,178.90
KLP - 60/ 16 - FV 16 00004 684.80 MLQ - E - 120 - A4 030-00002 1,216.65
KLP - 60/ 18 - FV 18 00005 704.85 MLQ - E - 180 - A4 030-00003 1,283.60
KLP - 60/ 20 - FV 20 00006 738.25
MLS
HJV HALFEN brick tie perpendicular
Framing systems
Adjustment anchor suitable for brick tie

coupler channels HMS 25/15 D and
6 channel 28/15

Item name F t b d Article no. Price FV = hot-dip galvanised
[kN] [mm] [mm] [mm] 0313.000- [EUR/100 items] MLS - 300 - FV 200 00004 359.70
Bolts, accessories
HJV - 1 - FV 1.5 6 40 13 00001 748.30 MLS - 350 - FV 200 00005 369.00

HJV - 2 - FV 3.3 8 50 17 00002 831.80 MLS - 400 - FV 200 00006 378.35
7 HJV - 3 - FV 5.0 10 50 17 00003 970.40
HJV - 1 - A4 1.5 6 40 13 00004 1,559.30 MLS - 300 - A4 200 00001 739.95
HJV - 2 - A4 3.3 8 50 17 00005 1,923.20 MLS - 350 - A4 200 00002 782.05
HJV - 3 - A4 5.0 10 50 17 00006 2,261.00 MLS - 400 - A4 200 00003 825.65
146
H A L F E N b R I C K t I E A N C H o R , t I M b E R Co N N E C t I o N s
ML - G ML 1

Debond sleeve (plastic), suitable for Application diagram HALFEN brick tie anchor Application
HALFEN brick tie anchor ML for connecting masonry with thin mortar joints diagram:
to HALFEN cast-in channels HTA 28/15 or HMS 25/15 D
ML anchor
Debond sleeve
1
ML-G 150
0134.010- [EUR/100 items] l [mm] 0132.080- [EUR/100 items]
ML - G - 150 00001 97.60 ss 304 = stainless steel grade SS 304
ML 1 - 125 -A2 00001 155.75 2
bL ML 1 - 185 -A2 00002 178.80
HALFEN brick tie anchor ML 1 - 245 -A2 00003 194.75
suitable for
HALFEN cast-in channel, HNA
channel 38/17 HALFEN timber fixing strap
for connecting timber designs to
HALFEN cast-in channels HTA 28/15 or 38/17
Lifting systems
Item name
l [mm]
[items] 0132.050- [EUR/100 items] 3
FV = hot-dip galvanised Shape Shape
bL - 85 - FV 200 00004 61.65 HNA-N HNA-WN
bL - 120 - FV 200 00005 74.65 HNA-bN 120
bL - 180 - FV 200 00006 99.95 without RL

ss 316 = stainless steel grade SS 316
bL - 85 - A4 200 00001 292.25
bL - 120 - A4 200 00002 324.15
bL - 180 - A4 200 00003 382.45 Item name
l [mm]
for HALFEN
HTA channels
[items] 0032.010- [EUR/100 items]
4
bLQ FV = hot-dip galvanised
HALFEN brick tie oblique anchor HNA - N 95 - FV 28/15 150 00001 109.50
suitable for channel 38/17 HNA - N 120 - FV 28/15 150 00002 126.40
0032.020-
HNA - bN 95 - FV 38/17 150 00001 109.50
HNA - bN 120 - FV 38/17 150 00002 126.40
HNA - bN 185 - FV 38/17 150 00003 166.50
DEtAN
0032.030-
HNA - WN 120 - FV all with M12 150 00001 134.15 5
BLQ-D = double-sided BLQ-E = one-sided HNA - WN 185 - FV all with M12 150 00002 161.90
Item name Article no. Price HsF

l [mm] 0132. [EUR/100 items] HALFEN rafter shoe Installation diagram
FV = hot-dip galvanised including 2 (vertical cross-section)
bLQ - D - 85 - FV 060-00004 770.75 toothed washers each,
bLQ - D - 120 - FV 060-00005 781.90 type tested
Framing systems
bLQ - D - 180 - FV 060-00006 801.50 Rafters
bLQ - E - 85 - FV 070-00004 635.25

HSF rafter shoe
6
bLQ - E - 120 - FV 070-00005 646.45
bLQ - E - 180 - FV 070-00006 665.15
ss 316 = stainless steel grade SS 316

bLQ - D - 85 - A4 060-00001 1,514.65
Note:
bLQ - D - 120 - A4 060-00002 1,561.20
bolts, accessories
5 HALFEN bolts ordered toothed washers with

bLQ - D - 180 - A4 060-00003 1,641.10
separately. round hole, Ø 17 mm
bLQ - E - 85 - A4 070-00001 1,229.85 Item name Article no. Price 7

bLQ - E - 120 - A4 070-00002 1,276.30 0038.010- [EUR/item]
bLQ - E - 180 - A4 070-00003 1,354.90 FV = hot-dip galvanised
PU [items] = packaging unit [items] HsF 6/12 - FV 00001 37.00
147
Acce s s o rie s
LSA -W: For inserting in MW HPV-L: fixing base porous concrete

Cavity wall tie Material/version: Porous concrete cavity wall tie Material/version:
Type LSA-W Stainless steel W 1.4571/1.4401 (A4) Type HPV-L Stainless steel W 1.4571/1.4401 (A4)
L
1
Item name for shell PU Article no. Price Item name for shell PU Article no. Price
L / d / c [mm] spacing [mm] [items] 0142.070- [EUR/100 items] Length x d [mm] spacing [mm] [items] 0141.010- [EUR/100 items]
LSA-W-225/4/25 up to 100 250 00001 41.40 HPV - L - 240/4 - A4 up to 80 100 00001 87.20
LSA-W-250/4/25 100-125 250 00002 45.15 HPV - L - 280/4 - A4 80-120 100 00002 98.10
LSA-W-275/4/25 125-150 250 00003 49.70 HPV - L - 320/4 - A4 120-160 100 00003 109.00
LSA-W-300/4/25 150-175 250 00004 53.50 Price
2 LSA-W-340/4/25 175-215 250 00005 60.50 Suitable drive-in and guide pipe [EUR/item]
0143.030-
L S A - DW : F i x i n g b a s e s o l i d b r i c k M W + S t B HPV - Z1 for HPV-L-…/4 00001 4.25
Cavity wall tie Material/version:
Type LSA-DW Stainless steel W 1.4571/1.4401 (A4) LSA-L: MW fixing base made from vertically perforated brick, KSL stones
incl. dowel 8 x 60; with shim (stainless steel A4) + drip disc
officially approved
Z-21.2-1009 or Z-17.1-825
Lifting systems
3
Eye Drip disc
Item name for shell PU Article no. Price
+ washer
L/d [mm] spacing [mm] [items] 0142.080- [EUR/100 items]
LSA-DW-160/4 up to 25 250 00001 53.95 Item name for shell PU Article no. Price
LSA-DW-180/4 25-45 250 00002 58.80 Length x d [mm] spacing [mm] [items] 0142.050- [EUR/100 items]
LSA-DW-210/4 45-75 250 00003 63.80 LSA-L-235/4 20-150 100 00001 98.10
LSA-DW-250/4 75-115 250 00004 70.55

LSA-DW-275/4 115-140 250 00005 74.75 Nylon dowel + hexagonal retaining screw suitable for LSA-L (A4)
LSA-DW-300/4 140-165 250 00006 79.50 0432.010- [EUR/100 items]
4 LSA-DW-320/4
LSA-DW-350/4
165-185
185-200
250
250
00007
00008
85.50
93.35
DUE - FUR 10x80 SS A4 100 00001 371.85
There is a drive-in pipe in every PU of 250 items. LSZ

Insulation holder Material/version:
HEA: Fixing base StB with drip nose plastic
Drive-in cavity wall tie Material/version: Type LSZ-ISO-CLIP
Type HEA; Stainless steel W 1.4571/1.4401 (A4)
officially approved
Z-21.1-910
DETAN
5 Insulation holder
with drip nose
Material/version:
plastic
Type LSZ-DAEM-60
Item name for shell PU Article no. Price

Length L x d [mm] spacing [mm] [items] 0140.010- [EUR/100 items]
drip disc Material/version:
HEA-160/4 - A4 up to 45 100 00001 71.95
Type LSZ-TROP-25 plastic
HEA-200/4 - A4 45-85 100 00002 75.20
HEA-250/4 - A4 85-135 100 00004 78.50 Item name for anchor diam. PU Article no. Price
Framing systems
HEA-300/4 - A4 135-185 100 00006 88.35 [mm] [items] [EUR/100 items]
6 HEA-200/5 - A4 45-85 100 00003 91.55

LSZ - ISO - CLIP 3-6 3-6 250
0143.050-
00002
3.10
HEA-250/5 - A4 85-135 100 00005 104.70 0143.050-

LSZ-DÄMM-60 3-5 3-5 250 2.55
HEA-300/5 - A4 135-185 100 00007 121.00 00001
0143.060-
LSZ-TROP-25 3-5 3-5 250 0.70
Price 00001
Suitable driving-in tool or guide pipe
[EUR/item] PU [items] = packaging unit [items]
0143.020-
Bolts, accessories
HEA - EW 4 for HEA-…/4 00001 26.40

HEA - EW 5 for HEA-…/5 00002 26.40
7
Suitable drill
0143.010-
HEA - BB 4 - 6x40 for HEA-…/4 00001 9.80
HEA - BB 5 - 7x40 for HEA-…/5 00002 11.85
148
C H E M I C A L A N C H o R b o Lt s Y s t E M s
Anchor stud Hb-V- A Anchor stud HB-V-A, A4 stainless steel - Continuation of left column -

Galvanised steel with nut and washer Approved for non-cracked concrete, ETA Item name PU Article no. Price
Approval 07/0257 Ø Maximum fixture thickness
Anchor length [items] ➃ 430.100- [EUR/100 items]
Hb -V-A 12- 95/ 220
Hb -V-A 12- 125/ 250
A4
A4
10
10
00055
00056
630.75
704.25
1
ETA-07/0257
Hb -V-A 12- 175/ 300 A4 10 00008 805.90
Hb -V-A 14- 35/ 170 A4 ➂ 10 00057 944.30
Item name PU Article no. Price Hb -V-A 16- 5/ 150 A4 10 00009 874.45
Ø Maximum fixture thickness Hb -V-A 16- 20/ 165 A4 10 00010 1,071.65
Anchor length [items] 0430.100- [EUR/100 items] Hb -V-A 16- 45/ 190 A4 10 00011 1,200.25
Type: GV = electro plated Hb -V-A 16- 65/ 210 A4 10 00012 1,383.95
Hb -V-A 8- 20/ 110 GV ➁ 10 00027 61.65 Hb -V-A 16- 85/ 230 A4 10 00058 1,494.20
Hb -V-A 8- 60/ 150 GV ➁ 10 00028 92.00 Hb -V-A 16- 105/ 250 A4 10 00013 1,604.40
Hb -V-A 10- 15/ 115 GV 10 00065 79.75 Hb -V-A 16- 155/ 300 A4 10 00059 1,935.10 2
Hb -V-A 10- 30/ 130 GV 10 00029 84.65 Hb -V-A 20- 20/ 220 A4 10 00014 2,445.85
Hb -V-A 10- 65/ 165 GV 10 00030 110.10 Hb -V-A 20- 60/ 260 A4 10 00015 2,792.45
Hb -V-A 10- 90/ 190 GV 10 00031 125.65 Hb -V-A 20- 100/ 300 A4 10 00060 3,625.25
Hb -V-A 10- 150/ 250 GV 10 00066 210.85 Hb -V-A 24- 15/ 220 A4 ➀ 5 00070 3,796.75
Hb -V-A 10- 200/ 300 GV 10 00067 264.10 Hb -V-A 24- 15/ 260 A4 5 00061 4,052.70
Hb -V-A 12- 10/ 135 GV 10 00032 98.10 Hb -V-A 24- 55/ 300 A4 5 00016 4,611.20
Hb -V-A 12- 35/ 160 GV 10 00033 115.00 Hb -V-A 30- 70/ 380 A4 ➁ ➂ 6 00062 7,709.80
Lifting systems
Hb -V-A 12- 85/ 210 GV 10 00034 151.85 Anchor studs M8 - M24 with external hexagon head. Other lengths on request
➀ Set with HB-P-V 20 capsule, not part of the approval
Hb -V-A
Hb -V-A
12- 95/
12- 125/
220 GV
250 GV
10
10
00035
00036
159.95
180.60 ➁ Please order setting tool Art. No. 0433-040-00037 separately. See page 150 3
➂ Not part of the approval
Hb -V-A 12- 175/ 300 GV 10 00037 227.15 ➃ Each package contains one setting tool
Hb -V-A 14- 35/ 170 GV ➁ 10 00038 209.05
Hb -V-A 16- 20/ 165 GV 10 00017 195.95 A d h e s i ve c a p s u l e H b - V - P
Hb -V-A 16- 45/ 190 GV 10 00018 216.00 Two-component synthetic resin in glass capsule Approved for
Hb -V-A 16- 85/ 230 GV 10 00039 258.90 non-cracked concrete

Hb -V-A 16- 105/ 250 GV 10 00040 272.00
Hb -V-A 16- 155/ 300 GV 10 00019 319.80
Hb -V-A 20- 20/ 220 GV 10 00041 381.90
Hb -V-A
Hb -V-A
20- 60/
20- 100/
260 GV
300 GV
10
10
00020
00042
393.95
452.20
4
Hb -V-A 24- 15/ 260 GV 5 00043 648.25 Item name PU Article no. Price
Hb -V-A 24- 55/ 300 GV 5 00021 687.35 Ø [items] 0433.050- [EUR/100 items]
Hb -V-A 30- 70/ 380 GV ➀ ➁ 6 00044 1,614.55 Hb -V-P 8 10 00001 125.65
Hb -V-P 10 10 00002 141.85
Type: FV = hot dipped galvanised Hb -V-P 12 10 00003 159.20
Hb -V-A 8- 20/ 110 FV 10 00022 85.75 Hb -V-P 14 ➀ 10 00004 241.95
Hb -V-A 10- 30/ 130 FV 10 00023 117.25 Hb -V-P 16 10 00005 241.95
DEtAN
Hb -V-A 10- 90/ 190 FV 10 00045 171.80 Hb -V-P 20 10 00006 294.90
Hb -V-A 12- 35/ 160 FV 10 00024 154.75 Hb -V-P 24 5 00007 346.15 5
Hb -V-A 12- 95/ 220 FV 10 00046 212.45 Hb -V-P 30 ➀ 6 00008 525.25
Hb -V-A 16- 20/ 165 FV 10 00047 264.95 ➀ Not part of the approval
Hb -V-A 16- 45/ 190 FV 10 00025 285.95 PU [items] = packaging unit [items]
Hb -V-A 16- 65/ 210 FV 10 00048 318.45
Hb -V-A 20- 20/ 220 FV 10 00049 498.40 Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages
156 - 162) are sold only as complete packaging units.
Hb -V-A 20- 60/ 260 FV 10 00026 527.70
Hb -V-A 24- 15/ 260 FV 846.70
Framing systems
5 00050
Hb -V-A 24- 55/ 300 FV 5 00051 918.05
Type: ss 316 = Stainless steel SS 316

6
Hb -V-A 8- 20/ 110 A4 10 00001 231.50
Hb -V-A 8- 60/ 150 A4 10 00052 349.05
Hb -V-A 10- 15/ 115 A4 10 00002 328.25
Hb -V-A 10- 30/ 130 A4 10 00003 385.80
Hb -V-A 10- 65/ 165 A4 10 00004 402.95
Hb -V-A 10- 90/ 190 A4 10 00053 461.75
bolts, accessories
Hb -V-A 10- 150/ 250 A4 10 00068 671.15

Hb -V-A 10- 200/ 300 A4 10 00069 869.55
Hb -V-A 12- 10/ 135 A4 10 00005 465.40 7
Hb -V-A 12- 35/ 160 A4 10 00006 514.40
Hb -V-A 12- 55/ 180 A4 10 00007 521.75
Hb -V-A 12- 65/ 190 A4 10 00064 565.85
Hb -V-A 12- 85/ 210 A4 10 00054 597.70
149
b l ow - o u t P u m p H b - V M - A P + H b - Z u - A P s e t t i n g to o l
Blow out pump HB-VM-AP + HB-ZU-AP Setting tool for 2-component synthetic resin
Accessory for cleaning drill hole for drill hole diameter 8/10 - 35 mm

Ø [items] 0433.040- [EUR/100 items]
Hb -V-M 8 1 00030 2.45
Item name Suitable for PU Article no. Price Hb -V-M 10 1 00031 2.65
drill holes Ø [mm] [items] 0433.040- [EUR/100 items] Hb -V-M 12 1 00032 3.15
Hb-VM-AP 10 1 00110 28.85 Hb -V-M 14 1 00033 6.10
2 Hb-Zu -AP 10 1 00069 16.50 Hb -V-M 16 1 00034 6.20
Hb -V-M 20 1 00035 8.25
Hb -V-M 24 1 00036 12.65
Cleaning brush Hb-Rb Hb -V-M 30 1 00037 31.85
Accessory for cleaning drill hole for PU [items] = packaging unit [items]
drill hole diameter 8/10 - 35 mm
Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages
Lifting systems
3
Item name Suitable PU Article no. Price
Hole-Ø [mm] for [items] 0433.040- [EUR/100 items]
Hb -Rb 10 HB -V M8 1 00104 6.90
Hb -Rb 12 HB -V M10 1 00105 7.05
Hb -Rb 14 HB -V M12 1 00106 7.25

Hb -Rb 18 HB -V M16 1 00107 7.65
Hb -Rb 26 HB -V M20 1 00109 10.00
4 Hb -Rb 28
Hb -Rb 32
HB -V M24
HB -V M30
1
1
00114
00115
10.65
15.45
A d h e s i ve c a p s u l e H b - V - P
Two-component synthetic resin in glass capsule Approved
for non-cracked concrete
DEtAN
5
Ø [item] 0433.050- [EUR/100 items]
Hb -V-P 8 10 00001 125.65
Hb -V-P 10 10 00002 141.85
Hb -V-P 12 10 00003 159.20
Hb -V-P 14 ➀ 10 00004 241.95
Hb -V-P 16 10 00005 241.95
Framing systems
Hb -V-P 20 10 00006 294.90
6 Hb -V-P 24
Hb -V-P 30 ➀
5
6
00007
00008
346.15
525.25
➀ Not part of the approval
bolts, accessories
150
C H E M I C A L A N C H O R BO LT S Y ST E M S
Anchor stud HB-V- A Anchor stud HB-V-A, A4 stainless steel - Continuation of left column

Galvanised steeel with nut and washer Item name PU Article no. Price
Approved for cracked and non-cracked concrete, ETA Approval 07/0246 Anchorage depth
Ø Max. fixture thickness
Anchor length [items] 0432.380- [EUR/100 items]
HB -VMZ-A 70 M12- 25/ 115 A4 10 00062 963.90
1
Option 1 für gerissenen Beton
ETA-07/0246 HB -VMZ-A 70 M12- 40/ 130 A4 10 00095 995.70

HB -VMZ-A 80 M12- 10/ 110 A4 10 00009 922.00
Item name PU Article no. Price HB -VMZ-A 80 M12- 25/ 125 A4 10 00010 993.15
Anchorage depth HB -VMZ-A 80 M12- 50/ 150 A4 10 00011 1,119.30
Ø Max. fixture thickness HB -VMZ-A 80 M12- 60/ 160 A4 10 00096 1,555.70
Anchor length [items] 0432.380- [EUR/100 items] HB -VMZ-A 80 M12- 100/ 200 A4 10 00012 1,442.90
GV = electro plated HB -VMZ-A 80 M12- 125/ 225 A4 10 00013 1,577.70
HB -VMZ-A 40 M8- 15/ 65 GV 10 00080 255.30 HB -VMZ-A 80 M12- 165/ 265 A4 10 00014 1,901.30
HB -VMZ-A 50 M8- 15/ 80 GV 10 00027 268.25 HB -VMZ-A 95 M12- 25/ 140 A4 10 00063 1,255.60 2
Lifting systems
HB -VMZ-A 70 M12- 25/ 115 GV
HB -VMZ-A 80 M12- 10/ 110 GV
10
10
00082
00035
432.40
408.55
HB -VMZ-A 90 M16- 60/ 175 A4
HB -VMZ-A 105 M16- 30/ 160 A4
10
10
00098
00068
1,980.40
1,742.80 3

HB -VMZ-A 100 M12- 60/ 180 GV 10 00042 590.95 HB -VMZ-A 170 M20- 20/225LGA4 ➀ 5 00071 3,010.45
HB -VMZ-A 100 M12- 100/ 220 GV
HB -VMZ-A 110 M12- 25/ 155 GV
10
10
00043
00084
682.25
528.05
HB -VMZ-A 170 M20- 25/ 230 A4
HB -VMZ-A 170 M20- 50/ 255 A4
5
5
00022
00023
3,072.90
3,425.65
4
HB -VMZ-A 105 M16- 30/ 160 GV 10 00087 585.00 HB -VMZ-A 200 M24- 50/290LG A4 ➀ 5 00073 4,559.75
HB -VMZ-A 125 M16- 165/ 315 GV 10 00047 1,104.70 ➀ Version LG with thread up to concrete surface Other dimensions and
DETAN
HB -VMZ-A 145 M16- 30/ 200 GV 5 00088 707.15 thread lengths available on request
HB -VMZ-A 115 M20- 30/ 175 GV 5 00089 1,043.70 PU [items] = packaging unit [items]

5
HB -VMZ-A 170 M20- 20/225 LGGV ➀ 5 00090 1,093.45
HB -VMZ-A 170 M20- 25/ 230 GV 5 00049 1,117.80
HB -VMZ-A 170 M20- 50/ 255 GV 5 00050 1,248.20
HB -VMZ-A 170 M20- 100/ 305 GV 5 00051 1,592.50
HB -VMZ-A 190 M20- 50/ 275 GV 5 00091 1,478.45
HB -VMZ-A 200 M24- 50/290LGGV ➀ 5 00092 1,664.15
Framing systems
HB -VMZ-A 200 M24- 50/ 290 GV 5 00052 1,664.15

HB -VMZ-A 200 M24- 100/ 340 GV 5 00053 1,819.55
HB -VMZ-A 225 M24- 50/ 315 GV 5 00093 1,772.05
6
Type: SS 316 = Stainless steel SS 316
HB -VMZ-A 40 M8- 15/ 65 A4 10 00060 440.90
HB -VMZ-A 50 M8- 15/ 80 A4 10 00001 545.00
HB -VMZ-A 50 M8- 30/ 95 A4 10 00002 529.10
HB -VMZ-A 50 M8- 45/ 110 A4 10 00003 630.75
HB -VMZ-A 60 M10- 10/ 85 A4 10 00004 724.55
Bolts, accessories
HB -VMZ-A 60 M10- 20/ 95 A4 10 00005 788.25

HB -VMZ-A 60 M10- 30/ 105 A4 10 00006 817.05
HB -VMZ-A 60 M10- 60/ 135 A4 10 00007 884.25 7
HB -VMZ-A 60 M10- 100/ 175 A4 10 00008 1,154.35
HB -VMZ-A 75 M10- 20/ 110 A4 10 00061 846.05
HB -VMZ-A 75 M10- 40/ 130 A4 10 00094 879.35
151
Injection system Hb-VMZ Anchor stud Hb-VMu- A GV

2-component adhesive, free from styrene Zinc plated steel with nut and washer
Approved for solid and perforated brickwork Approved for non-cracked concrete, ETA approval 07/0255
1
option 7
ETA-07/0255
Item name Volume PU Article no. Price Item name PU Article no. Price
[ml] [items] ➀ 0433.040- [EUR/item] Ø Max. fixture thickness
Cartridge Hb-VMZ 345 345 12 00102 43.25 Anchor length [items] 0430.100- [EUR/100 items]
static mixer Hb-VM-X - 12 00039 1.40 Type: GV = galvanised steel

Extension for mixer Hb- Hb -VMu-A 8- 10/ 100 GV 10 00024 60.70
- - 00076 0.45
VM-XL Hb -VMu-A 8- 20/ 110 GV 10 00025 61.65
2 brush gauge Hb-VM-bL - - 00103 8.65 Hb -VMu-A 8- 40/ 130 GV 10 00026 77.75
Installation wedge Hb- Hb -VMu-A 8- 55/ 145 GV 10 00047 91.60
- - 00116 1.05
VMZ-MK Hb -VMu-A 8- 70/ 160 GV 10 00048 100.10
One HB VM-X static mixer is included with each cartridge Hb -VMu-A 8- 115/ 205 GV 10 00049 158.70
➀ Single cartridges can also be supplied Hb -VMu-A 10- 10/ 110 GV 10 00027 79.35
Hb -VMu-A 10- 30/ 130 GV 10 00028 84.65
Reinigungsbürste Hb -Rb Hb -VMu-A 10- 50/ 150 GV 10 00029 104.35
Cleaning brush HB-RB Accessory for cleaning drill hole Hb -VMu-A 10- 65/ 165 GV 10 00030 110.10
Lifting systems
Attachment for power drill

Hb -VMu-A 10- 90/ 190 GV 10 00031 125.65
3 Hb -VMu-A
Hb -VMu-A
10- 160/
12- 10/
260
135
GV
GV
10
10
00032
00033
215.15
98.10
Hb -VMu-A 12- 30/ 155 GV 10 00036 115.00
Hb -VMu-A 12- 50/ 175 GV 10 00038 137.40
Hb -VMu-A 12- 85/ 210 GV 10 00039 151.85
Item name Suitable PU Article no. Price Hb -VMu-A 12- 125/ 250 GV 10 00040 180.60
Ø for [items] 0433.040- [EUR/item]
Hb -VMu-A 12- 175/ 300 GV 10 00041 227.15

Hb -Rb 10 HB -VMZ M8 1 00104 6.90
Hb -VMu-A 16- 15/ 160 GV 10 00042 195.95
Hb -Rb 12 HB -VMZ M10 1 00105 7.05
Hb -VMu-A 16- 30/ 175 GV 10 00043 204.50
Hb -Rb 14 HB -VMZ M12 1 00106 7.25
Hb -VMu-A 16- 60/ 205 GV 10 00044 237.50
4 Hb -Rb 18 HB -VMZ M16
HB -VMZ 115
1 00107 7.65
Hb -VMu-A 16- 90/ 235 GV 10 00045 264.10
Hb -Rb 22 1 00108 8.00 Hb -VMu-A 16- 155/ 300 GV 10 00046 319.80
M20
Hb -Rb 24 HB -VMZ M20 1 00113 8.40
Type: ss 316 = Stainless steel SS 316
Hb -Rb 26 HB -VMZ M24 1 00109 10.00
Hb -VMu-A 8-10/100 A4 10 00001 207.00
Hb -VMu-A 8-20/110 A4 10 00002 231.50
Dispenser gun Hb-VM-P 345 Hb -VMu-A 8-40/130 A4 10 00003 287.80
Dispenser gun also suitable for Hb -VMu-A 8-55/145 A4 10 00050 303.75
conventional cartridges
Hb -VMu-A 8-70/160 A4 10 00051 363.75
DEtAN
5 Hb -VMu-A 8-115/205 A4
Hb -VMu-A 10-10/110 A4
10
10
00052
00004
432.35
317.20
Hb -VMu-A 10-30/130 A4 10 00005 385.80
Hb -VMu-A 10-50/150 A4 10 00006 393.15
Hb -VMu-A 10-65/165 A4 10 00007 402.95
Item name PU Article no. Price Hb -VMu-A 10-90/190 A4 10 00008 461.75
Hb -VMu-A10-160/260 A4 10 00009 683.40
Dispenser gun Hb-VM-P 345 1 00077 77.75
Hb -VMu-A 12-10/135 A4 10 00010 465.40
Dispenser gun Hb-VM-P 345 Profi 1 00078 113.75
Framing systems
Hb -VMu-A 12-30/155 A4 10 00013 515.60

Hb -VMu-A 12-50/175 A4 10 00015 560.95
b l ow - o u t g u n / b l ow - o u t p u m p
6 Accessory for cleaning drilled holes
Hb -VMu-A 12-85/210 A4
Hb -VMu-A12-125/250 A4
10
10
00016
00017
597.70
704.25
Hb VM-AbP Hb VM-AP Hb -VMu-A12-175/300 A4 10 00018 805.90
Hb -VMu-A 16-15/160 A4 10 00019 1,063.10
Hb -VMu-A 16-30/175 A4 10 00020 1,136.55
Hb -VMu-A 16-60/205 A4 10 00021 1,359.45
Hb -VMu-A 16-90/235 A4 10 00022 1,567.70
Hb -VMu-A16-155/300 A4 10 00023 1,935.10
bolts, accessories
Item name Suitable for PU Article no. Price Stainless steel HCR available on request
drilled hole [items] 0433.040- [EUR/item]
7 Hb VM-AP
Ø [mm]
10-18 1 00110 28.85 Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages
Hb VM-AbP 22-26 1 00111 48.35 156 - 162) are sold only as complete packaging units.
152
I n t e r n a l t h r e a d s l e e ve H b - V M u - I G Cleaning brush Hb-Rb

electro plated steel Attachment for power drill
for non-cracked concrete to clean drilled holes
Item name PU Article no. Price Item name Suitable for PU Article no. Price
[items] 0430.230- [EUR/100 items] Ø [ml] [items] 0433.040-- [EUR/item]
Type: GV = electro plated Hb -Rb 10 HB -VMU M8 1 00104 6.90
Hb -VMu-IG M6 GV ➀ 10 00003 101.50 Hb -Rb 12 HB -VMU M10 1 00105 7.05
Hb -VMu-IG M8 GV ➀ 10 00004 108.75 Hb -Rb 14 HB -VMU M12 1 00106 7.25
Hb -Rb 18 HB -VMU M16 1 00107 7.65
Type: ss 316 = Stainless steel SS 316 2
Hb -VMu-IG M6 A4 ➀ 10 00001 322.10 Cleaning brush Hb-Rb-H
Hb -VMu-IG M8 A4 ➀ 10 00002 389.45
➀ HB-VMU-IG is not part of the approval
Injection system Hb-VMu

2-component adhesive, free from styrene
Approved for solid and perforated brickwork Item name suitable for PU Article no. Price
Lifting systems
drilled hole
Ø
Hb -Rb-H 18
Ø [mm]
10-16
[items] 0433.040-
1 00067
[EUR/item]
5.65 3
Processing and curing times
Item name Volume PU Article no. Price Curing time
temperature °C
[ml] [items] 0433.040- [EUR/item] Processing
in the drilled dry damp
150 12 00129 15.55 time
Cartridge Hb-VMu 150 ➀ hole

concrete concrete
Cartridge Hb-VMu 300 ➀ 300 12 00130 33.35
Minutes Minutes Minutes
Cartridge Hb-VMu 345 345 12 00131 39.95
≥ -5°C 90 330 660
static mixer Hb-VM-X - 12 00039 1.40
≥ 0°C 45 180 360
Extension for mixer Hb-
VM-XL (200 mm)
- - 00076 0.45 ≥ +5°C 20 120 240 4
≥ +10°C 12 80 160
brush gauge Hb-VM-bL - - 00103 8.65
≥ +20°C 6 45 90
A static mixer is included with each cartridge ≥ +30°C 4 25 50
➀ HB-VMU 150 and HB-VMU 300 can be dispensed with a standard ≥ +35°C 2 20 40
silicone gun
➁ Single cartridges can also be supplied ≥ +40°C 1,4 15 30
Dispenser gun Hb-VM-P 345 Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages
DEtAN
Dispenser gun also suitable for 156 - 162) are sold only as complete packaging units.
conventional cartridges 5
HB VM-P 345

0433.040- [EUR/item]
Framing systems
Dispenser gun Hb-VM-P 345 00077 77.75

Dispenser gun Hb-VM-P 345 Profi 00078 113.75
6
b l ow - o u t p u m p H b - V M - A P
Accessory for cleaning drill holes
For drill hole diameters 10 - 18 mm
bolts, accessories
Item name Suitable for PU Article no. Price 7

drill hole Ø [items] 0433.040- [EUR/item]
[mm]
Hb-VM-AP 10-18 1 00110 28.85
153
f o r f u l l a n d p e r f o r a t e d b r i c k wo r k
Anchor studs Hb-VMu- A GV and Hb-VMu- AH GV/A4 I n te r n a l l y t h re a d e d s l e eve s H b - V M u - I G H a n d

Zinc plated steel / stainless steel SS 316 H b - V M u - I G H G V a n d s s 316

Approved by German building inspectorate for solid and perforated
brickwork DiBtZ-21.3-1853 Electro plated / stainless steel SS 316
German approval for solid brick without Perfo sleeve DiBtZ-21.3-1853
1 Z-21.3-1853
Z-21.3-1853

Item name PU Article no. Price Ø [items] 0430.240- [EUR/100 items]

Ø Max. fixture thickness Type: GV = electro plated
Anchor length [items] 0430. [EUR/100 items] Hb -VMu-IGH M6 10 00003 109.15
2 Type: GV = electro plated Hb -VMu-IGH M8 10 00004 116.85
Hb -VMu-A 8- 10/ 100 GV 10 190-00024 60.70 Item name PU Article no. Price
Hb -VMu-A 8- 20/ 110 GV 10 190-00025 61.95 Ø [items] 0430.230- [EUR/100 items]
Hb -VMu-A 8- 40/ 130 GV 10 190-00026 77.75 Hb -VMu-IG M6 10 00003 101.50
Hb -VMu-A 8- 55/ 145 GV 10 190-00047 91.60 Hb -VMu-IG M8 10 00004 108.75
Hb -VMu-A 8- 70/ 160 GV 10 190-00048 100.10
Lifting systems
Hb -VMu-A 10- 30/ 130 GV 10 190-00028 84.65 Type: Stainless steel SS 316
Hb -VMu-A 10- 50/ 150 GV 10 190-00029 104.35 Hb -VMu-IGH M6 10 00001 322.10
3 Hb -VMu-A 10- 65/ 165 GV 10 190-00030 110.10 Hb -VMu-IGH M8 10 00002 389.45
Hb -VMu-A 12- 15/ 120 GV ➀ 10 190-00034 125.65 Hb -VMu-IG M6 10 00001 322.10
Hb -VMu-A 12- 25/ 130 GV ➀ 10 190-00035 215.15 Hb -VMu-IG M8 10 00002 389.45
Hb -VMu-A 12- 50/ 155 GV ➀ 10 190-00037 109.70
➀ HB-VMU-A 12 for use in solid brick without Perfo sleeve

Hb -VMu-A 12- 80/ 185 GV ➀ 10 190-00053 152.15 ➁ HB-VMU-AH 12 for use in solid or perforated brickwork with Perfo sleeve
Hb -VMu-A 12- 120/ 225 GV ➀ 10 190-00054 155.65 Stainless steel HCR or not galvanised steel on request
Hb -VMu-A 12- 160/ 265 GV ➀ 10 190-00055 172.75 PU [items] = packaging unit [items]
4 Hb -VMu-AH 12- 15/ 120 GV ➁
Hb -VMu-AH 12- 25/ 130 GV ➁
10
10
250-00004
250-00005
120.05
129.80 Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages
Hb -VMu-AH 12- 50/ 155 GV ➁ 10 250-00006 149.75 156 - 162) are sold only as complete packaging units.
Hb -VMu-AH 12- 80/ 185 GV ➁ 10 250-00010 194.90
Hb -VMu-AH 12- 120/ 225 GV ➁ 10 250-00011 242.80
Hb -VMu-AH 12- 160/ 265 GV ➁ 10 250-00012 288.60
Type: Stainless steel SS 316

Hb -VMu-A 8- 10/ 100 A4 10 190-00001 207.00
231.50
DEtAN
Hb -VMu-A 8- 20/ 110 A4 10 190-00002

5 Hb -VMu-A 8- 40/ 130 A4 10 190-00003 287.80
Hb -VMu-A 8- 55/ 145 A4 10 190-00050 303.75
Hb -VMu-A 8- 70/ 160 A4 10 190-00051 363.75
Hb -VMu-A 8- 115/ 205 A4 10 190-00052 432.35
Hb -VMu-A 10- 10/ 110 A4 10 190-00004 317.20
Hb -VMu-A 10- 30/ 130 A4 10 190-00005 385.80
Hb -VMu-A 10- 50/ 150 A4 10 190-00006 393.15
Hb -VMu-A 10- 65/ 165 A4 10 190-00007 402.95
Framing systems
Hb -VMu-A 10- 90/ 190 A4 10 190-00008 461.75
6 Hb -VMu-A 10- 160/ 260 A4

Hb -VMu-A 12- 15/ 120 A4 ➀
10
10
190-00009
190-00011
683.40
423.75
Hb -VMu-A 12- 25/ 130 A4 ➀ 10 190-00012 455.60
Hb -VMu-A 12- 50/ 155 A4 ➀ 10 190-00014 515.60
Hb -VMu-A 12- 80/ 185 A4 ➀ 10 190-00056 766.35
Hb -VMu-A 12- 120/ 225 A4 ➀ 10 190-00057 902.10
Hb -VMu-A 12- 160/ 265 A4 ➀ 10 190-00058 1,042.75
Hb -VMu-AH 12- 15/ 120 A4 ➁ 10 250-00001 439.70
bolts, accessories
Hb -VMu-AH 12- 25/ 130 A4 ➁ 10 250-00002 467.85

Hb -VMu-AH 12- 50/ 155 A4 ➁ 10 250-00003 532.75
7 Hb -VMu-AH 12- 80/ 185 A4 ➁ 10 250-00007 774.05
911.20
Hb -VMu-AH 12- 120/ 225 A4 ➁ 10 250-00008
Hb -VMu-AH 12- 160/ 265 A4 ➁ 10 250-00009 1,053.30
154
Injection system Hb-VMu Cleaning brush Hb-Rb-H

2-component cartridge, free from styrene
Approved for full and perforated brickwork
1
Item name suitable for PU Article no. Price
drilled hole
Item name Content PU Article no. Price Ø Ø [mm] [items] 0433.040- [EUR/item]
[ml] [items] ➁ 0433.040- [EUR/item] Hb -Rb-H 18 10-16 1 00067 5.65
Cartridge Hb-VMu 150 ➀ 150 12 00129 15.55
Cartridge Hb-VMu 300 ➀ 300 12 00130 33.35 I n j e c t i o n a d h e s i ve H b - V M - M E 3 8 5
Cartridge Hb-VMu 345 345 12 00131 39.95 Very high loads
static mixer Hb-VM-X - 12 00039 1.40 No shrinkage of the mortar
Extension for mixer Hb-VM-
- - 00076 0.45
2
XL (200 mm)
brush gauge Hb-VM-bL - - 00103 8.65
A static mixer is included with each cartridge
➀ HB-VMU 150 and HB-VMU 300 can be dispensed
with a standard silicone gun Item name Content PU Price
➁ Single cartridges can also be supplied [ml] [items] ➀ 0433.040- [EUR/item]
Cartridge Hb-VM-ME 385 385 12 00132 38.35
Lifting systems
Dispenser gun Hb-VM-P 345 static mixer Hb-VM-X - 12 00039 1.40
Dispenser gun also suitable for
conventional cartridges
Dispensing gun Hb-VM-P
385 Profi
- - 00117 175.30 3
A static mixer is included with each cartridge
➀ Single cartridges can also be supplied
HB VM-P 345
Processing and curing times

Item name Article no. Price temperature °C
Processing
0433.040- [EUR/item] in the drilled Curing time
time
Dispenser gun Hb-VM-P 345 00077 77.75 hole
Dispenser gun Hb-VM-P 345 Profi 00078 113.75
≥ -5°C
Minutes
90 330
Minutes
660
4
b l ow o u t p u m p H b - V M - A P ≥ 0°C 45 180 360
Accessory for cleaning drilled holes ≥ +5°C 20 120 240
For drilled hole diameter 10 - 18 mm ≥ +10°C 12 80 160
≥ +20°C 6 45 90
≥ +30°C 4 25 50
≥ +35°C 2 20 40
≥ +40°C 1,4 15 30
DEtAN
Item name Suitable for PU Article no. Price 156 - 162) are sold only as complete packaging units. 5
drilled hole [items] 0433.040- [EUR/item]
Ø [mm]
Hb -VM-AP 10-18 1 00110 28.85
P e r f o s l e e ve H b - V M u - s H
Polypropylene
Approved for perforated brickwork
Framing systems
Item name Suitable PU Article no. Price

Ø for [items] 0433.040- [EUR/item]
Hb -VMu-sH 14x100 M8 10 00120 37,30
M10 - M12;
Hb -VMu-sH 16x100 10 00121 42,60
bolts, accessories
IGH M6 - M8
155
M E C H A N I C A L H E AV Y- D UT Y A nch o r B o lt s
We d g e a n c h o r H B - B G V – Continued from left column –

Galvanised steel We d g e a n c h o r H B - B G V
Approved for non-cracked concrete, ETA Approval 07/0248 Galvanised steel
Approved for non-cracked concrete, ETA Approval 07/0248
1 Option 7
ETA-07/0248
ETA-07/0248
Item name PU Article no. Preis
Ø Maximum fixture thickness Item name PU Article no. Price
Anchor length [items] 0432.060- [EUR/100 items] Ø Maximum fixture thickness
B 6- 5/ 40 GV ➀ ➁ 100 00059 37.90 Anchor length [items] 0432.060- [EUR/100 items]

B 6- 5-15/ 52 GV ➁ 100 00140 43.30 B 16- ....30-48/ 150 GV 20 00054 223.75
B 6- 10-20/ 67 GV 100 00060 46.00 B 16- 60-78/ 180 GV 20 00055 314.20
2 B 6- 15-25/ 72 GV 100 00141 46.05 B 16- 80-98/ 200 GV 10 00090 347.20
B 6- 25-35/ 82 GV 100 00061 50.60 B 16- 100-118/ 220 GV 10 00056 375.95
B 6- 30-40/ 87 GV 100 00142 49.50 B 16- 130-148/ 250 GV 10 00091 461.15
B 6- 40-50/ 97 GV 100 00062 53.15 B 16- 165-183/ 285 GV 10 00092 569.80
B 8- 5/ 50 GV ➀ ➁ 100 00063 44.85 B 16- 200-218/ 320 GV 10 00093 610.25
B 8- 10/ 60 GV ➀ ➁ 100 00064 50.90 B 20- 10/ 120 GV 10 00146 390.00
B 8- 10-19/ 75 GV 100 00065 51.65 B 20- 5-27/ 150 GV 10 00057 509.50
B 8- 15-24/ 80 GV 100 00045 53.25 B 20- 20-42/ 165 GV 10 00147 431.35
Lifting systems
B 8- 20-29/ 85 GV 100 00046 61.65 B 20- 35-57/ 180 GV 10 00094 603.85
3 B 8- 25-34/ 90 GV
B 8- 30-39/ 95 GV
100
100
00066
00047
62.60
63.45
B 20- 60-82/ 205 GV
B 20- 95-117/ 240 GV
10
10
00058
00095
643.25
705.05
B 8- 35-44/ 100 GV 100 00143 54.95 ➀ Not part of the approval
B 8- 45-54/ 110 GV 100 00067 66.55 ➁ Note the reduced load bearing capacity and the anchorage depth
B 8- 55-64/ 120 GV 100 00068 67.65 PU [items] = packaging unit [items]
B 10- 10/ 60 GV ➀ ➁ 50 00048 63.35
B 10- 10-16/ 85 GV 50 00069 76.70 Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages
B 10- 15-21/ 90 GV 50 00049 77.30 156 - 162) are sold only as complete packaging units.
B 10- 20-26/ 95 GV 50 00070 81.70
B 10- 30-36/ 105 GV 50 00071 82.85
4 B 10- 45-51/ 120 GV
B 10- 50-56/ 125 GV
50
50
00072
00073
96.05
100.10
B 10- 70-76/ 145 GV 50 00074 113.00
B 10- 100-106/ 175 GV 50 00075 114.05
B 10- 140-146/ 215 GV 25 00076 151.00
B 12- 5/ 75 GV ➀ ➁ 25 00077 113.95
B 12- 10/ 95 GV 25 00050 116.30
B 12- 10-25/ 105 GV 25 00144 117.25
B 12- 15-30/ 110 GV 25 00051 117.45
DETAN
B 12- 20-35/ 115 GV 25 00078 133.45

5 B 12- 30-45/ 125 GV 25 00052 138.75
B 12- 50-65/ 145 GV 25 00079 146.95
B 12- 65-80/ 160 GV 25 00080 167.20
B 12- 85-100/ 180 GV 25 00081 204.50
B 12- 105-120/ 200 GV 25 00082 210.35
B 12- 125-140/ 220 GV 25 00083 240.60
B 12- 145-160/ 240 GV 20 00084 246.65
B 12- 160-175/ 255 GV 20 00085 259.95
Framing systems
B 12- 190-205/ 285 GV 20 00086 287.35
6 B 12- 230-245/ 325 GV

B 12- 260-275/ 355 GV
20
20
00087
00088
441.45
511.20
B 16- 5/ 90 GV ➀ ➁ 20 00089 191.15
B 16- 15/ 115 GV ➀ ➁ 20 00053 205.35
B 16- 10-28/ 130 GV 20 00145 205.65
- continued in right column -
Bolts, accessories
156
M E C H A N I C A L H E AV Y- D u t Y A N C H o R b o Lt s
We d g e a n c h o r H b - b - u G V We d g e a n c h o r H b - b

Electro plated steel, with large washer DIN 440 1. SS 316 Stainless steel for non-cracked concrete,
Approved for non-cracked concrete, ETA Approval 07/0248 ETA Approval 07/0247
option 7 option 7
1
ETA-07/0248 ETA-07/0247
Item name PU Article no. Price Item.name PU Article no. Price

Ø Maximum fixture thickness Ø Maximum fixture thickness
Anchor length [items] 0432.310- [EUR/100 items] Anchor length [items] 0432.060- [EUR/100 items]
b-u 12- 85-100/ 180 GV ➀ 25 00001 219.40 b 6- 5/ 40 A4 ➀➁ 100 00001 159.45
b-u 12- 105-120/ 200 GV ➀ 25 00002 243.05 b 6- 5-15/ 52 A4 ➁ 100 00133 168.30
b-u 12- 125-140/ 220 GV ➀ 25 00003 248.90 b 6- 10-20/ 67 A4 100 00002 181.75
b-u 12- 145-160/ 240 GV ➀ 20 00004 254.85 b 6- 25-35/ 82 A4 100 00003 202.80 2
b-u 12- 160-175/ 255 GV ➀ 20 00005 268.50 b 6- 40-50/ 97 A4 100 00004 228.80
b-u 12- 190-205/ 285 GV ➀ 20 00006 303.55 b 8- 5/ 50 A4 ➀➁ 100 00005 228.80
b-u 12- 230-245/ 325 GV ➀ 20 00007 455.70 b 8- 10/ 60 A4 ➀➁ 100 00023 235.90
b-u 12- 260-275/ 355 GV ➀ 10 00008 527.70 b 8- 10-19/ 75 A4 100 00024 240.05
b-u 16- 80-98/ 200 GV ➁ 10 00009 369.55 b 8- 15-24/ 80 A4 100 00006 245.70
b-u 16- 100-118/ 220 GV ➁ 10 00010 413.10 b 8- 20-29/ 85 A4 100 00025 256.20
b-u 16- 130-148/ 250 GV ➁ 10 00011 482.65 b 8- 30-39/ 95 A4 100 00007 268.20
Lifting systems
b-u 16- 165-183/ 285 GV ➁ 10 00012 593.85 b 8- 45-54/ 110 A4 100 00008 289.30
b-u 16- 200-218/ 320 GV ➁ 10 00013
➀ Ø Washer M12 DIN 440 = 44 mm, M16 DIN440 = 56 mm
631.75 b 8-
b 10-
55-64/ 120 A4
10/ 60 A4 ➀➁
100
50
00009
00026
299.80
315.25
3
➁ Note the reduced load bearing capacity and the anchorage depth. b 10- 10-16/ 85 A4 50 00027 345.40
b 10- 15-21/ 90 A4 50 00010 352.50
Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages b 10- 20-26/ 95 A4 50 00028 367.80
b 10- 30-36/ 105 A4 50 00029 394.50
b 10- 45-51/ 120 A4 50 00011 412.00

b 10- 50-56/ 125 A4 50 00030 428.30
b 10- 70-76/ 145 A4 50 00031 497.00
b 10- 100-106/ 175 A4 50 00012 573.45
b 10- 140-146/ 215 A4 25
25
00032
00033
716.60
490.00
4
b 12- 5/ 75 A4 ➀➁
b 12- 10/ 95 A4 ➁ 25 00034 507.55
b 12- 10-25/ 105 A4 25 00135 517.20
b 12- 15-30/ 110 A4 25 00013 522.25
b 12- 20-35/ 115 A4 25 00014 577.10
b 12- 30-45/ 125 A4 25 00015 600.25
b 12- 50-65/ 145 A4 25 00016 635.65
b 12- 65-80/ 160 A4 25 00035 704.00
DEtAN
b 12- 85-100/ 180 A4 25 00017 815.05
b 12- 105-120/ 200 A4 25 00036 864.20 5
b 12- 125-140/ 220 A4 20 00037 972.20
b 12- 145-160/ 240 A4 20 00038 1,079.75
b 16- 5/ 90 A4 ➀➁ 20 00136 864.20
b 16- 15/ 115 A4 ➀➁ 20 00018 945.75
b 16- 10-28-/ 130 A4 20 00137 972.70
b 16- 30-48/ 150 A4 20 00019 1,012.60
Framing systems
b 16- 60-78/ 180 A4 10 00020 1,186.30

b 16- 80-98/ 200 A4 10 00021 1,266.15
b 16- 100-118/ 220 A4
b 16- 130-148/ 250 A4
10
10
00039
00040
1,532.40
1,719.05
6
b 16- 200-218/ 320 A4 10 00138 2,736.85
b 20- 5-27/ 150 A4 10 00041 1,887.35
b 20- 35-57/ 180 A4 10 00042 2,429.90
b 20- 60-82/ 205 A4 10 00022 2,511.95
b 20- 95-117/ 240 A4 10 00043 2,701.80
bolts, accessories
➁ Note the reduced load bearing capacity and the anchorage depth
7
157
We d g e a n c h o r H b - b - I G G V
Electro plated steel with

internal thread
Item name Drill depth PU Article no. Price

[mm] [items] 0432.070- [EUR/100 items]
Hb -b-IG M 6 x 45 GV ➀ 100 00004 59.85
Hb -b-IG M 8 x 50 GV ➀ 100 00005 84.90

Hb -b-IG M 10 x 60 GV ➀ 50 00006 111.85
Hb -b-IG M 12 x 75 GV ➀ 25 00007 194.15
2
We d g e a n c h o r H b - b - I G s s 316
Stainless steel SS 316 with internal thread
Lifting systems
3 Item name Drill depth

[mm]
PE Article no. Preis
[items] 0432.070- [EUR/100 items]
Hb -b-IG M 6 x 45 A4 ➀ 100 00008 215.55
Hb -b-IG M 8 x 50 A4 ➀ 100 00003 251.80
Hb -b-IG M 10 x 60 A4 ➀ 50 00001 370.75
Hb -b-IG M 12 x 75 A4 ➀ 25 00002 550.30
➀ Drive the B-IG wedge anchor a little below the fitting
surface using a fitting screw

We d g e a n c h o r H b - b - W G V
Electro plated steel
4 For fixing
reinforcement mats
Item name PE Article no. Price

[items] 0432.290- [EUR/100 itms]
Hb -b-W 8x80x32 GV 200 00001 134.50
DEtAN
Hb -b-W 8x110x35 GV 200 00002 149.85

5 Other lengths and stainless steel SS 316 (up to total length of 180 mm) on
request
Framing systems
6
bolts, accessories
158
We d g e a n c h o r H b - b Z - u G V We d g e a n c h o r H b - b Z G V

With large washer DIN 9021 Galvanised steel
Approved for cracked and non-cracked concrete, ETA Approval 07/0250 Approved for cracked and non-cracked concrete, ETA Approval 07/0250
1
option 1 für gerissenen beton
ETA-07/0250
Hb-bZ-u 8- 10/ 75 GV 100 00001 75.30 Hb-bZ 8- 10/ 75 GV 100 00001 70.70
Hb-bZ-u 8- 15/ 80 GV 100 00002 79.25 Hb-bZ 8- 15/ 80 GV 100 00002 74.75
Hb-bZ-u 8- 30/ 95 GV 100 00003 92.55 Hb-bZ 8- 30/ 95 GV 100 00003 87.20
Hb-bZ-u 8- 50/ 115 GV 100 00004 105.65 Hb-bZ 8- 50/ 115 GV 100 00004 99.60 2
Hb-bZ-u 10- 10/ 90 GV 50 00005 102.75 Hb-bZ 8- 100/ 165 GV 50 00005 122.05
Hb-bZ-u 10- 15/ 95 GV 50 00006 109.70 Hb-bZ 10- 10/ 90 GV 50 00006 97.15
Hb-bZ-u 10- 20/ 100 GV 50 00007 118.20 Hb-bZ 10- 15/ 95 GV 50 00007 103.30
Hb-bZ-u 10- 30/ 110 GV 50 00008 122.80 Hb-bZ 10- 20/ 100 GV 50 00008 111.60
Hb-bZ-u 10- 50/ 130 GV 50 00009 130.05 Hb-bZ 10- 30/ 110 GV 50 00009 115.75
Hb-bZ-u 10- 100/ 180 GV 50 00026 169.35 Hb-bZ 10- 50/ 130 GV 50 00010 122.70
Hb-bZ-u 10- 180/ 230 GV 50 00027 220.45 Hb-bZ 10- 75/ 155 GV 50 00011 143.15
Lifting systems
Hb-bZ-u 12- 15/ 110 GV 25 00010 161.35 Hb-bZ 10- 100/ 180 GV 50 00039 161.90
Hb-bZ-u 12- 30/ 125 GV
Hb-bZ-u 12- 50/ 145 GV
25
25
00011
00012
184.15
212.55
Hb-bZ
Hb-bZ
10- 180/
12- 15/
230 GV
110 GV
50
25
00040
00012
212.45
149.40 3
Hb-bZ-u 12- 125/ 220 GV 25 00013 335.25 Hb-bZ 12- 20/ 115 GV 25 00013 153.70
Hb-bZ-u 12- 160/ 255 GV 20 00014 481.80 Hb-bZ 12- 30/ 125 GV 25 00014 167.95
Hb-bZ-u 16- 25/ 145 GV 20 00015 353.25 Hb-bZ 12- 50/ 145 GV 25 00015 194.25
Hb-bZ-u 16- 100/ 220 GV 10 00016 560.40 Hb-bZ 12- 65/ 160 GV 25 00016 210.65
Hb-bZ-u 16- 140/ 260 GV 10 00017 612.70 Hb-bZ 12- 85/ 180 GV 25 00017 241.55

Hb-bZ-u 16- 180/ 300 GV 10 00018 678.60 Hb-bZ 12- 105/ 200 GV 25 00018 270.85
Hb-bZ-u 20- 30/ 165 GV 10 00019 673.70 Hb-bZ 12- 125/ 220 GV 25 00019 319.40
Hb-bZ-u 20- 60/ 195 GV 10 00020 862.75 Hb-bZ 12- 145/ 240 GV 20 00020 361.35
Hb-bZ-u 20- 100/ 235 GV
Hb-bZ-u 20- 130/ 265 GV
5
5
00021
00022
963.85
1,014.50
Hb-bZ
Hb-bZ
12- 160/
12- 190/
255 GV
285 GV
20
20
00021
00037
394.90
441.45
4
Hb-bZ-u 20- 150/ 285 GV 5 00023 1,138.05 Hb-bZ 16- 15/ 135 GV 20 00022 317.35
Hb-bZ-u 24- 30/ 190 GV 10 00024 1,424.85 Hb-bZ 16- 25/ 145 GV 20 00023 326.55
Hb-bZ-u 24- 60/ 220 GV 5 00025 1,582.05 Hb-bZ 16- 50/ 170 GV 20 00024 396.05
Other lengths on request Hb-bZ 16- 80/ 200 GV 10 00025 436.55
Hb-bZ 16- 100/ 220 GV 10 00026 528.05
Hb-bZ 16- 140/ 260 GV 10 00027 576.70
Hb-bZ 16- 180/ 300 GV 10 00028 640.40
DEtAN
Hb-bZ 20- 30/ 165 GV 10 00029 623.75
Hb-bZ 20- 60/ 195 GV 10 00030 798.85 5
Hb-bZ 20- 100/ 235 GV 5 00031 894.60
Hb-bZ 20- 130/ 265 GV 5 00032 939.35
Hb-bZ 20- 150/ 285 GV 5 00033 1,053.70
Hb-bZ 24- 30/ 190 GV 10 00034 1,319.30
Hb-bZ 24- 60/ 220 GV 5 00035 1,464.90
Hb-bZ 24- 75/ 235 GV 5 00036 1,529.75
Hb-bZ 24- 100/ 260 GV 5 00038 1,595.35
Framing systems
Other lengths on request

6
bolts, accessories
159
We d g e a n c h o r H b - b Z s s 316 We d g e a n c h o r H b - b Z - u s s 316
Stainless steel SS 316 With large washer DIN 9021 Approved for cracked and non-cracked concrete
Approved for cracked and non-cracked concrete, ETA Approval 07/0249
1 option 1 für gerissenen beton
ETA-07/0249
Hb-bZ 8- 10/ 75 A4 100 00001 372.20 Hb -bZ-u 8- 10/ 75 A4 100 00001 398.30
Hb-bZ 8- 15/ 80 A4 100 00009 379.45 Hb -bZ-u 8- 15/ 80 A4 100 00002 406.00
Hb-bZ 8- 30/ 95 A4 100 00010 400.75 Hb -bZ-u 8- 30/ 95 A4 100 00004 404.40
2 Hb-bZ 8- 50/ 115 A4 100 00002 457.30 Hb -bZ-u 8- 50/ 115 A4 100 00005 489.30
Hb-bZ 10- 10/ 90 A4 50 00003 493.10 Hb -bZ-u 10- 10/ 90 A4 50 00006 527.60
Hb-bZ 10- 15/ 95 A4 50 00011 514.50 Hb -bZ-u 10- 15/ 95 A4 50 00007 550.65
Hb-bZ 10- 30/ 110 A4 50 00012 606.35 Hb -bZ-u 10- 30/ 110 A4 50 00008 650.10
Hb-bZ 10- 50/ 130 A4 50 00004 707.65 Hb -bZ-u 10- 50/ 130 A4 50 00009 757.15
Hb-bZ 12- 15/ 110 A4 25 00005 785.90 Hb -bZ-u 12- 15/ 110 A4 25 00010 840.90
Hb-bZ 12- 20/ 115 A4 25 00013 807.25 Hb -bZ-u 12- 30/ 125 A4 25 00011 911.20
Hb-bZ 12- 30/ 125 A4 25 00014 851.70 Hb -bZ-u 12- 50/ 145 A4 25 00012 1,056.00
Lifting systems
Hb-bZ 12- 50/ 145 A4 25 00006 986.80 Hb -bZ-u 12- 125/ 220 A4 25 00013 1,431.85
3 Hb-bZ 12- 85/ 180 A4

Hb-bZ 12- 125/ 220 A4
25
25
00015
00016
1,162.80
1,338.15
Hb -bZ-u 12- 160/ 255 A4
Hb -bZ-u 12- 180/ 275 A4
20
20
00021
00022
1,483.15
1,586.05
Hb-bZ 12- 160/ 255 A4 20 00023 1,483.15 Hb -bZ-u 12- 190/ 285 A4 20 00023 1,666.90
Hb-bZ 12- 180/ 275 A4 20 00024 1,586.05 Hb -bZ-u 16- 25/ 145 A4 20 00014 1,684.50
Hb-bZ 12- 190/ 285 A4 20 00025 1,666.90 Hb -bZ-u 16- 100/ 220 A4 10 00015 2,320.05
Hb-bZ 16- 25/ 145 A4 20 00007 1,556.05 Hb -bZ-u 20- 30/ 165 A4 10 00016 3,395.75
Hb-bZ 16- 50/ 170 A4 20 00008 1,681.70 Hb -bZ-u 20- 60/ 195 A4 10 00017 3,996.75
Hb-bZ 16- 100/ 220 A4 10 00017 2,094.95 Hb -bZ-u 20- 100/ 235 A4 5 00018 4,873.90
Hb-bZ 20- 30/ 165 A4 10 00018 3,173.55 Hb -bZ-u 20- 130/ 265 A4 5 00019 5,369.90
Hb-bZ 20- 60/ 195 A4 10 00019 3,735.25 Hb -bZ-u 20- 150/ 285 A4 5 00020 5,795.25
4 Hb-bZ 20- 100/ 235 A4
Hb-bZ 20- 130/ 265 A4
5
5
00020
00021
4,603.85
5,042.65
Other lengths on request
Hb-bZ 20- 150/ 285 A4 5 00022 5,416.20
Other lengths on request Chemical anchor bolts (pages 149 - 155) and heavy-duty anchor bolts (pages
DEtAN
5
Framing systems
6
bolts, accessories
160
We d g e a n c h o r H b - b Z - I G s s 316 Coated bolt

Stainless steel SS 316 DIN 933
German approval for cracked and non-cracked concrete with washer DIN 125 ➀
Thread Ø [items] 0432.390- [EUR/100 items]
Max. fixture thickness [items] 0432.280- [EUR/100 items] Pre-installation
Pre-installation Hb -s-IG 6x25 A4 100 00002
Hb -bZ-IG M6 - 0 A4 ➀ 100 00001 401.70 Hb -s-IG 8x25 A4 50 00004 upon
Hb -bZ-IG M8 - 0 A4 ➀ 50 00002 581.75 Hb -s-IG 10x40 A4 25 00006 request
Hb -bZ-IG M10 - 0 A4 ➀ 25 00003 881.80 Hb -s-IG 12x45 A4 20 00008 2
Hb -bZ-IG M12 - 0 A4 ➀ 20 00004 1,818.75
through-fastening
through-fastening Hb -s-IG 6x16 A4 100 00001
Hb -bZ-IG M6 -10 A4 ➀ 100 00005 420.10 Hb -s-IG 8x18 A4 50 00003 upon
Hb -bZ-IG M6 -20 A4 ➀ 100 00006 439.70 Hb -s-IG 10x20 A4 25 00005 request
Hb -bZ-IG M6 -30 A4 ➀ 100 00007 455.60 Hb -s-IG 12x25 A4 20 00007
Hb -bZ-IG M8 -10 A4 ➀ 50 00008 606.25
Lifting systems
Hb -bZ-IG M8 -20 A4 ➀ 50 00009 633.20 Coated nut
Hb -bZ-IG M8 -30 A4 ➀
Hb -bZ-IG M10 -10 A4 ➀
50
25
00010
00011
646.65
908.75
with washer DIN 125 ➀ ➁
3
Hb -bZ-IG M10 -20 A4 ➀ 25 00012 922.25
Hb -bZ-IG M10 -30 A4 ➀ 25 00013 940.60
Hb -bZ-IG M12 -10 A4 ➀ 20 00014 1,845.70
Hb -bZ-IG M12 -20 A4 ➀ 20 00015 1,864.05
Hb -bZ-IG M12 -30 A4 ➀ 20 00016 1,887.35

➀ Bolts and nuts to be ordered separately. Other bolt lengths upon request. Item name PU Article no. Price
[items] 0432.410- [EUR/100 items]
Pre-installation
Coated countersunk screw Hb -Mu-IG 6 A4
Hb -Mu-IG 8 A4
100
50
00001
00002
4
Countersunk bolt SS 316
auf Anfrage
with countersunk washer Hb -Mu-IG 10 A4 25 00003
Hb -Mu-IG 12 A4 20 00004
➀ Bolts to be ordered separately
➁ Approval in preparation. Anchor system on galvanised or highly corrosion-
resistant material on request Onlöy approved in combination with coated
screw HB-S-IG A4 DIN 933.

s e t t i n g t o o l H b - b Z - I G s s s 316
DEtAN
[items] 0432.400- [EUR/100 items]
through-fastening for pre-installation 5
Hb -sK-IG 6 A4 100 00001
Hb -sK-IG 8 A4 50 00002 upon
Hb -sK-IG 10 A4 25 00003 request
Hb -sK-IG 12 A4 20 00004
Framing systems

0433.040- [EUR/item]
Pre-installation
Hb -bZ-IGs M6V A4 00052 22.05
6
Hb -bZ-IGs M8V A4 00053 23.25
Hb -bZ-IGs M10V A4 00054 25.85
Hb -bZ-IGs M12V A4 00055 28.55
bolts, accessories
161
D r o p - i n a n c h o r H b - E s s 316 Drop-in anchor Hb-E GV

Stainless steel SS 316 Electro plated steel

Approved for concrete, ETA Approval 07/0251 For the fixation of diamond drills
1 option 1 für gerissenen beton
ETA-007/0251
[items] 0432.400- [EUR/100 items] [items] 0433.040- [EUR/100 items]
Hb -E M 5 A4 ➀ 100 00012 Hb -ED M 12 GV ➀ 50 00091 50,60
Hb -E M 6 A4 100 00013 Hb -ED M 12 D GV ➀ 50 00150 60,05

Hb -E M 8 A4 100 00014 Hb -ED M 16 GV ➀ 25 00092 109,15
Hb -E M 8 x 40 A4 100 00015 upon ➀ Not part of the approval
2 Hb -E M 10 A4 50 00016 request
standard setting tool
Hb -E M 12 A4 50 00017
Hb -E M 16 A4 25 00018
Hb -E M 20 A4 25 00019
setting tool Hb-bZ-IGs

for through-fastening
Lifting systems

3 0433.040- [EUR/item]
Hb -E-sW 5 00020 6.40
Hb -E-sW 6 00021 6.40
Item name Article no. Price Hb -E-sW 8 00022 6.80
0433.040- [EUR/item] Hb -E-sW 8 x 40 00023 7.55
through-fastening Hb -E-sW 10 00024 8.30
Hb -bZ-IGs M 6D 00056 7.35 Hb -E-sW 12 00025 9.60

Hb -bZ-IGs M 8D 00057 7.85 Hb -E-sW 12 x 80 00026 11.60
Hb -bZ-IGs M 10D 00058 9.55 Hb -E-sW 16 00027 14.05
4 Hb -bZ-IGs M 12D 00059 11.00 Hb -E-sW 16 x 80

Hb -E-sW 20
00028
00029
15.85
26.10
Drop-in anchor Hb-E GV
Electro plated steel Marking - setting tool
Approved for concrete, ETA Approval 07/0252 for drop-in anchor HB-E
option 1 für gerissenen beton
ETA-007/0252
DEtAN
5 Item name PE Article no. Price

[items] 0433.040- [EUR/100 items] Item name Article no. Price
Hb -E M 5 GV ➀ 100 00001 21.60 0433.040- [EUR/item]
Hb -E M 6 GV 100 00002 18.30 without hand protection
Hb -E M 8 GV 100 00003 23.20 Hb -E-MsW 8 00060 9.60
Hb -E M 8 x 40 GV 100 00004 31.20 Hb -E-MsW 8 x 40 00061 9.90
Hb -E M 10 GV 50 00005 33.45 Hb -E-MsW 10 00062 11.10
Hb -E-MsW 12 00063 13.30
Framing systems
Hb -E M 12 GV 50 00006 52.50
Hb -E M 12 x 80 GV 50 00007 197.90 Hb -E-MsW 12 x 80 00089 15.25
Hb -E-MsW 16 16.60
6 Hb -E M 16 GV
Hb -E M 16 x 80 GV
25
25
00008
00009
112.45
242.50 Hb -E-MsW 16 x 80
00064
00090 18.55
Hb -E M 20 GV 25 00010 235.80 Hb -E-MsW 20 00065 31.50
PU [items] = packaging unit [items] with hand protection
Hb -E-MsH 8 00170 17.55
Hb -E-MsH 8 x 40 00171 17.90
Hb -E-MsH 10 00172 19.05
bolts, accessories
Hb -E-MsH 12 00173 21.20

Hb -E-MsH 12 x 80 00174 23.20
7 Hb -E-MsH 16
Hb -E-MsH 16 x 80
00175
00176
24.60
25.90
Hb -E-MsH 20 00177 35.70
162
H A L F E N H C b Co N C R E t E b o Lt
Concrete bolt type HCb-EH ty p e H C b - W H s w i t h i n t e g r a l wa s h e r,

w i t h p r o j e c t i n g t h r e a d , h e x n u t & d r i ve h e x h e a d a n d s t a r d r i ve
Material: ss 316 = stainless steel 1.4401/ 1.4404, HCR = stainless steel 1.4529 Material: GV = electro plated
upon request
GV = electro plated, DA = Dacromet coated 1
Item name Bolt Price

Item name Bolt Price HCB-WHS diameter PU Article no.
HCB-EH diameter PU Article no. ds [mm] [items] [EUR/
ds [mm] [items] [EUR/ 100 items]
0436.080
0436. 100 items] 8 x 80 - GV 10.5 50 00001 92.40
10x120 M12x20 - GV 12.5 50 020-00005 216.60
10x140 M12x35 - A4 12.5 10 020-00003 904.00
Concrete bolt type HCb-P with pan head
10x140
10x160
M12x35 - HCR
M12x55 - A4
12.5
12.5 10
020-00004
020-00001
upon request
935.45 a n d s t a r d r i ve 2
10x160 M12x55 - HCR 12.5 020-00002 upon request Material: GV = electro plated
10x165 M12x45 - GV 12.5 50 020-00006 391.80
10x180 M12x75 - A4 12.5 50 020-00007
upon request
10x200 M12x75 - A4 12.5 50 020-00008
14x120 M16x35 - DA 16.6 25 030-00001 668.95
14x165 M16x35 - DA 16.6 25 030-00002 716.70 Item name Bolt Price
HCB-P diameter PU Article no.
Lifting systems
16x190 M18x45 - DA 18.6 25 040-00001 958.75
ds [mm] [items] [EUR/
16x220 M18x45 - DA 18.6 25 040-00002 1,019.30
16x310 M18x45 - DA 18.6 25 040-00003 1,621.35
5 x 60 - GV 6.5 100
0436.
090-00001
100 items]
31.85 3
6 x 60 - GV 7.6 100 100-00001 38.25
Concrete bolt type HCb-WH
w i t h i n t e g r a l wa s h e r a n d h e x h e a d Concrete bolt type HCb-C with countersunk head
Material: ss 316 = stainless steel 1.4401/ 1.4404, a n d s t a r d r i ve
HCR = stainless steel 1.4529 upon request

Material: GV = electro plated

4
HCB-WH diameter PU Article no. Item name Bolt Price
ds [mm] [items] [EUR/ HCB-C diameter PU Article no.
0436.010 100 items] ds [mm] [items] [EUR/
10 x 95 - A4 12.5 10 00001 738.10 0436.110 100 items]
10 x 95 - HCR 12.5 00002 upon request 5 x 40 - GV 6.5 100 00001 28.65
10 x 105 - A4 12.5 50 00003 772.40
10 x 105 - HCR 12.5 00004 ty p e H C b - E M w i t h h e x h e a d
upon request
10 x 115 - HCR 12.5 00006 a n d M 8 16 m m p r o j e c t i n g t h r e a d
DEtAN
use in the sanitary sector
5
Concrete bolt type HCb-H
w i t h h e x h e a d ( w i t h o u t i n t e g r a l wa s h e r )
HCB-EM diameter PU Article no.
Framing systems
0436.130 100 items]

6 x 55 - GV 6.5 100 00001 54.15
Item name Bolt Price 6

HCB-H diameter PU Article no. ty p e H C b - I M w i t h i n t e r n a l t h r e a d
ds [mm] [items] [EUR/ ( M 8 o r M 10 f o r e a c h h a l f ) a n d h e x
0436. 100 items]
6 x 40 - GV 7.6 100 050-00001 38.25
use in the sanitary sector
6 x 60 - GV 7.6 100 050-00002 38.25
8 x 80 - GV 10.5 100 060-00001 82.80
8 x 90 - GV 10.5 100 060-00002 79.60
bolts, accessories
8 x 120 - GV 10.5 100 060-00003 111.50

10 x 65 - GV 12.5 100 070-00001 105.10
10 x 90 - GV 12.5 50 070-00002 130.60
HCB-IM diameter
ds [mm]
PU
[items]
Article no.
[EUR/ 7
10 x 100 - GV 12.5 50 070-00003 143.35 0436.140 100 items]
10 x 120 - GV 12.5 50 070-00004 159.25 6 x 55 - GV 6.5 100 00001 89.20
163
H A L F E N Co N C R E t E b o Lt H C b
Item names of HCb types:

Aerated concrete bolt HCb- A -WH
EH = External thread with Hexagonal head

w i t h i n t e g r a l wa s h e r a n d h e x h e a d WH = with Washer and Hexagonal head
Material: GV = electro plated WHS = with Washer, Hexagonal head and
star-drive
1 EM = External thread (Metric)
H = Hexagonal head
IM = Internal thread (Metric)
C = Counter Sunk, Star-drive
Item name Bolt Price P = Pan head, Star-drive I
HCB-A-WH diameter PU Article no. A = Aereated autoclaved concrete
0436.150 100 items]
10 x 110 - GV 10 100 00001 76.45

10 x 160 - GV 10 100 00002 95.60
2 Aerated concrete bolt type HCb- A -C

w i t h c o u n t e r s u n k h e a d a n d s t a r d r i ve Example: HCb-EH 10x160 M12x55
Material: GV = electro plated 160
h nom=85 tk
d o =10 ds=12,5 h o =95 M12x55

d f =14
Lifting systems
Item name Bolt Price Example: HCb-WH 10x95

HCB-A-C diameter PU Article no.
3 ds [mm] [items]
0436.
[EUR/
100 items]
95
hnom =85 tk
do =10
8 x 110 - GV 8 100 160-00001 60.55

10 x 110 - GV 10 100 170-00001 73.25 ds=12,5 h o =95
df =14
10 x 160 - GV 10 100 170-00002 95.60
Aerated concrete bolt type HCb- A -P

w i t h p a n h e a d a n d s t a r d r i ve
Note:
Material: GV = electro plated Please visit www.halfen-deha.de to download HCb
calculation software.
4

HCB-A-P diameter PU Article no.
0436.180 100 items]
10 x 90 - GV 10 100 00001 70.10
10 x 110 - GV 10 100 00002 73.25
DEtAN
10 x 160 - GV 10 100 00003 95.60

Framing systems
6
bolts, accessories
164
N OT E S
165
G E N E R A L CO N D I T I O N S O F PAY M E N T A N D D E L I V E RY
f r o m 0 1. 0 2 . 2 0 07
§ 1 Area of application: 8. Where sales are effected in a foreign currency the Buyer shall of title as compared to the other processed objects at the time
1. All our deliveries and services are subject to the following bear the exchange risk from the time of conclusion of the con- of processing.
terms and conditions. The Buyer`s conditions of purchase shall tract. 5. If the reservation of ownership or the assignment is not ef-
hereby be rejected. Nor shall any of the Buyer`s conditions of § 4 Delivery times and dates: fective according to the law prevailing in the area in which the
purchase be recognised, should we fail to expressly reject them 1. Delivery times and dates shall be approximate only. The ob- goods are located, the security corresponding to the reservation
upon receipt of said conditions of purchase by us. Our terms and servance of the delivery time by us implies that all commercial of ownership or the assignment in this area shall be considered
conditions shall be considered accepted at the latest upon taking and technical questions between us and the Buyer are clarified as agreed. In the event that the co-operation of the Buyer is re-
delivery of our goods. and that the Buyer has fulfilled all duties incumbent on him such quired, he must take all measures necessary for the constitution
2. The conditions shall also apply to all future transactions with as e.g. providing the required regulatory certificates or approvals, and conservation of rights of this kind.
the Buyer. submission of the required design documents or execution of the § 7 Statutory Warranty
3. The conditions apply to an entrepreneur or a public contract advance payment. Even when a certain delivery date has been 1. The Buyer shall examine the goods immediately upon receipt
placing authority. expressly agreed, this shall only apply when we in turn have been in as far as this is possible in the ordinary course of business
§ 2 Conclusion of contract: supplied with the correct materials in due time. and, if a defect is detected, shall inform us in writing without
1. Our quotations are subject to confirmation. Contracts and any 2. Under these conditions delivery times shall commence on the undue delay.
other agreements as well as declarations of warranty shall be day following our acknowledgement of order and at any rate at 2. If the Buyer fails to inform us, the goods are considered ac-
binding only upon our written confirmation. the earliest after mutual agreement on the type of delivery. cepted, unless it is a defect which was not recognizable during
2. Errors in quotations, catalogues, acknowledgements of orders, Delivery times and dates shall refer to the time of dispatch ex the examination.
invoices etc., including calculation and clerical errors, shall not be factory. If, however, it becomes evident already before the fixed 3. If such a defect is discovered later, the Buyer must inform us
binding for us. Catalogues, brochures, drawings and advertising delivery time that the Customer has committed or will commit in writing immediately upon discovery; otherwise the goods are
leaflets published by us and the information contained therein a substantial infringement of the contract, we shall be entitled considered accepted also with regard to this defect.
shall not be binding unless expressly confirmed by us in con- to fully or partly withdraw from the contract and - if the Buyer 4. The Buyer shall be obliged to accept any excess quantities of
tract. is liable for the infringement - to claim damages due to non- up to 5% of the individual items at the contract price.
3. We retain the exclusive right of ownership, copyright and usu- fulfilment. 5. The time of leaving our factory shall be decisive for the condi-
fructuary right for working drawings prepared in connection with 3. Delivery times and dates shall be extended - notwithstand- tion of the goods being in accordance with the contract.
quotations or orders. This also applies to other documents, plans ing our rights arising from default - by the period for which the 6. Should defects occur, the treatment and processing shall be
or sketches, esp. documents prepared by stress analysts. These Buyer is in default towards us or fails to meet any obligation to discontinued without delay.
may not be made accessible to any third party. lnfringement of co-operate. 7. If defects caused by us occur on delivered goods or our serv-
our rights shall entitle us to claim for damages. 4. We are entitled to carry out part deliveries to a reasonable ices, we are entitled at our own choice to remedy the defect
4. If the delivery comprises forms and objects according to draw- extent which shall not affect the price. Each and every part or to deliver new goods respectively to render new services. If
ings, models or samples handed over to us by the Buyer, the delivery shall be considered as an independent transaction. Calls we should fail to remedy the defect respectively to deliver new
Buyer shall give a guarantee that production and delivery do not and the splitting up of individual part deliveries have to be carried goods respectively to render new services or if we are otherwise
violate any right of industrial property. If nevertheless any rights out in such a way as to ensure production and delivery according entitled to refuse further measures, the Buyer is entitled to the
of third parties are violated, the Buyer shall immediately indem- to contract. If calls or split-ups are not made at all or not in time, legal rights. Basically, at least two removal of defects are reason-
nify us from claims of third parties. we are entitled upon unsuccessful expiry of a set time limit to able for the Buyer. The withdrawal is excluded in the event of an
5. If with reference to industrial property rights a third party withdraw from the contract and/or to claim damages. immaterial breach of duty.
prohibits us from producing and delivering objects manufactured 5. The deadline for delivery shall be reasonably extended in the 8. Any claims in respect of said defects shall be void, if the
according to drawings, models or samples of the Buyer, we are event of measures having to do with industrial conflicts, esp. Buyer does not give us the opportunity to satisfy ourselves of said
entitled, without being obliged to examine the legal position, strikes and lock-out as well as in the event of unforeseen hin- defects especially if he does not, without delay, put the goods
to stop production and delivery of such goods and to demand drances (esp. force majeure) which are beyond our sphere of which he complained about or samples thereof at our disposal.
reimbursement of the costs incurred. The Buyer is obliged to im- influence. This also applies to events occurring at sub-suppli- 9. If we are liable pursuant to § 8 of these conditions, the Buyer‘s
mediately exempt us from any claims for compensation from a ers. If the force majeure causes a final, permanent, irreparable claims based on defects shall be subject to statutory limitations.
third party. hindrance of delivery, we are entitled to cancel the contract. 6. Furthermore, statutory limitations also apply to statutory war-
6. Offers and cost estimates involving development and design Should we be in default, the Buyer shall be able to withdraw from ranty claims if the defect consists of a third party‘s legal right
work will be invoiced without express agreement. the contract following the lapse of a reasonable period of grace to demand delivery or in some other right which is recorded
7. We are allowed to destroy samples, drawings and any other granted to us in as far as the Buyer has not been notified that the in the Land Register, or in the case a building defect is caused
order enclosures six months after completion of the contract, if goods are ready for dispatch within the said period of grace. by the ordinary and proper use of an object intended for use
not otherwise stipulated in writing. § 5 Dispatch and passing of risk: on a building. Furthermore, claims in respect of defects become
§ 3 Prices, conditions of payment: 1. Goods ready for dispatch must be called for immediately. time-barred according to the statutory provisions, if we render
1. Our prices are quoted ex works plus the value-added tax valid 2. Dispatch shall be effected ex works charges payable unless planning services for a building. In other cases, claims based on
at the time of delivery. All our deliveries are subject to a minimum otherwise agreed. Transport packagings shall be invoiced. defects shall be time-barred after one year.
order quantity according to the price list currently applicable. Our 3. The risk shall pass on to the Buyer, also in case of free delivery, § 8 Liability
prices shall apply only to the quoted respectively confirmed ar- when the goods are transferred on to the forwarding agent or 1. We shall be liable in the event of intent and gross negligence
ticle unit numbers and the described material and design types. carrier, but at the latest on leaving the factory or warehouse. on our part and intent or gross negligence on the part of execu-
Additional demands shall be paid separately by the Buyer. § 6 Retention of title: tive employees. We shall also be liable for breach of guarantee
2. If not otherwise agreed in writing, our invoices are payable 1. Delivery of all sold goods shall be made subject to retention (“Garantie”), for the assumption of a procurement risk, for cul-
either within 10 days from the date of the invoice minus a 2 % of title in our favour up to the complete and final payment of all pable injury to life, body, and health, and within the scope of
discount or within 30 days net. A 2 % discount is granted only claims existing at the time the contract is concluded including liability under the Product Liability Act.
under the condition that all payment obligations from previous future claims arising from the business relationship. This also 2. We shall be liable on the merits for each culpable breach of
deliveries have been fully met. Acceptance of cheques according includes all additional claims, such as e.g. financing costs, interest material contractual duties and for gross breach of non-executive
to separate agreement shall be subject to receipt deducting costs rates. This shall also apply if individual claims have been included employees. In terms of amount, our liability under this § 8 sub-
and expenses with the value date being the day on which we can in regular billing and have been balanced and accepted. paragraph 2 shall be limited to typical, foreseeable damage.
dispose of the equivalent. Should the Buyer delay the acceptance 2. The Buyer is entitled to resell the goods subject to retention 3. To the extent our liability is excluded or limited, this shall also
of the goods, payment of the total sum becomes due 15 days of title in the ordinary course of business; however, he shall al- apply to the personal liability of our employees, workers, assist-
after notification that the goods are ready for dispatch. ready assign all claims in the amount of the final invoice amount ants, agents, and auxiliary persons.
3. Contrary to provisions stipulated by the Buyer, we shall be (including VAT) to us arising from the resale against his custom- § 9 Place of performance, venue and applicable law
entitled to appropriate payments to his previous debts first. If ers or third parties, namely independent from the fact whether 1. The place of performance and venue for both parties to the
costs and interest have already been incurred, we are entitled to the reserved goods were resold with or without agreement. The contract shall be Düsseldorf. We shall also be entitled to file pro-
appropriate any payments first to the costs then to the interest Buyer remains entitled to collect this claim also after the assign- ceedings against the Buyer at his general place of jurisdiction.
and finally to the main debt. ment. Our authority to collect the claim ourselves will remain 2. The only law applicable to all legal relations between the Buyer
4. We are entitled to securities which are usual in kind and extent unaffected. We, however, commit to not collecting the claims, as and us shall be German law excluding the UN Convention on the
for our claims whether conditional or unlimited in time. long as the Buyer is not in default of payment. This also applies if International Sale of Goods.
5. Late payment shall result in the Buyer having to pay interest in an application is filed to start insolvency proceedings. If this is the § 10 Miscellaneous
the amount of 8 % above the German basic interest rate. Further case, we are entitled to demand that the Buyer discloses the as- 1. The highest construction supervisory authority commissioned
claims from our side remain reserved. signed claims and their debtors, gives all information required for with the supervision of goods approved by the building authority
6. The buyer shall only be entitled to offset and rights of reten- the collection, submits the appropriate documents and informs and/or an office determined by this authority shall be entitled to
tion if his claim is undisputed, has been accepted by us or has the debtors about the assignment. enter the Buyer`s premises, warehouse and building sites at any
been finally determined by a court. 3. The Buyer may neither pledge the goods subject to retention time during working hours and without prior notice and to take
7. All or claims shall immediately become due when the con- of title nor transfer them by way of security. In the event of all actions necessary in connection with the inspection of the
ditions of payment are not observed or when we learn of cir- distraint or other interference of third parties, the Buyer shall object to be controlled.
cumstances which may reduce the Buyer`s creditworthiness. We notify us thereof in writing without delay and provide us with all 2. Goods which have not been expressly sold for export may
shall then be entitled to effect any outstanding deliveries against information and documentation necessary to protect our rights. not be brought into areas outside the Federal Republic in an un-
advance payment only. lf the Buyer is in default in payment we The executory officer‘s or third party‘s attention is to be called processed state.
shall also be entitled to withdraw from the contract and to de- to our retention of title. The Buyer shall bear all costs incurred 3. We are entitled to store personal data of our business part-
mand damages. We shall furthermore be entitled to forbid the in order to avoid the distraint and to recover the goods subject ners and prospective customers as defined by the Federal Data
further sale and the reprocessing of the delivered goods and to to retention of title unless the costs can be collected from third Protection Act.
demand the return or the transfer of the constructive possession parties. 4. Should individual provisions of the present terms and condi-
of the delivered goods at the cost of the Buyer and to revoke the 4. Processing or reshaping the goods subject to retention of title tions are or become ineffective in whole or in part, the effective-
authorisation for direct debiting pursuant to § 6, sub-paragraph by the Buyer shall always be done for us. The contingent right of ness of the remaining provisions shall not be affected. In such
2. The Buyer hereby authorises us to enter his premises in the the Buyer to the goods subject to retention of title shall continue case the parties commit themselves already now to enter into
aforementioned events and to remove the delivered goods which to apply to the processed or reshaped product. If the goods negotiations with the target to replace the ineffective provision
shall, however, be considered as withdrawal from the contract; at subject to retention of title are processed with other objects not by such a provision coming as close to the economic meaning of
the same time we reserve the right of further claims against the belonging to us, we shall acquire co-ownership of the new prod- the previous provision as possible. The same applies in case of
Buyer, especially claims for damages. uct in proportion to the value of the goods subject to retention the existence of loopholes.
166
applies also to copying in extracts.
© 2008 Halfen GmbH, Germany
1.000 04/08
P - 010 - 04/08 - E
HALFEN GmbH · Liebigstrasse 14 · D - 40764 Langenfeld

Phone: + 49 (0) 2173-970-0 · Fax: + 49 (0) 2173-970-123 · www.halfen.com

Base 2/08

Uploaded by

Copyright:

Available Formats

Base 2/08

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Base 2/08

Uploaded by

Copyright:

Available Formats

Base 2/08

wb mill finish (without corrosion protection)

HCR high corrosion resistance stainless steel

Vf Polystyrene Bead Filler (Material: Polystyrene)

Kf Combination Strip Filler (Material: Polyethylene)

We reserve the right to price changes, mistakes and technical modifications.

1 Concrete connection systems

3 Lif ting systems

Threaded lifting systems

4 Façade connection systems

Brickwork support systems

Natural stone systems

5 Tension rod systems

Concrete connection systems

Façade connection systems

Toothed channel profile and

HALFEN cast-in channel, HALFEN cast-in channel,

3 HTA 72/48 - FV - 400 - Vf

Standard cut length surcharge: 10 % officially approved

Item name Number of Article no. Price

6 HTA 72/48 - A4 - 250 - Vf

HTA 72/48 - A4 - cut length - Vf

Concrete connection systems

Façade connection systems

Item name Number of Article no. Price

HTA 52/34 - Q - FV - 550 - Vf 3 00309 30.30

HALFEN cast-in channel, HALFEN cast-in channel,

1 bundle = 54 items 1 bundle = 54 items

3 HTA 50/30 - FV - 3050 - Vf

ENA HCR = channel + anchor, stainless steel

Item name Article no. Price

6 SS 304 = stainless steel

ENA 28/65 00001 28.60

Concrete connection systems

Façade connection systems

HALFEN cast-in channel, HALFEN cast-in channel,

3 HTA 38/17 - FV - cut length - Vf

Standard cut length surcharge: Standard cut length surcharge: 10 %

with shortened anchors

6 HTA 38/17 -K - A4 - 300 - Vf - anch.A4

hex head bolt HTA-V 38/17 - FV - cut length - Vf

Concrete connection systems

Façade connection systems

Item name Article no. Price

Item price per metre: 2.34 EUR/metre

SS 316 = stainless steel 7

HZA 29/20 HALFEN cast-in channel DYNAGRIP system - cut lengths

1 Z - 21.4 - 1691 • special cut lengths

Type HZA 38/23

Standard cut lengths [mm] / number of anchor type HZA 38/23

HZA 29/20 - FV - 6070 - Vf 31 00003 129.55

3 Item price per metre:

4850/ 25 5050/ 26 5250/ 27 5450/ 28

HALFEN cast-in channel type: HZA 38/23 - FV

Example: 1 item HZA 38/23 - FV - 2550

EUR 29,26/m x 2550 mm

Standard lengths, for prices see left-hand column.

• Special cut lengths

Concrete connection systems