Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Adjustment

    Uploaded by

    Charlie Dela Rosa
    The document provides instructions for calibrating a unit under calibration (UUC). It specifies that if any errors are found in the UUC's zero and span, the potentiometers should be adjusted according to the customer's manual. Calibration readings should be recorded in a specified format, and calibration certificates should provide data for five calibration points including test set temperature, test readings, master sensor readings, deviations, allowed uncertainties, and expanded uncertainties.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Adjustment

    Uploaded by

    Charlie Dela Rosa
    12 views2 pages
    The document provides instructions for calibrating a unit under calibration (UUC). It specifies that if any errors are found in the UUC's zero and span, the potentiometers should be adjusted according to the customer's manual. Calibration readings should be recorded in a specified format, and calibration certificates should provide data for five calibration points including test set temperature, test readings, master sensor readings, deviations, allowed uncertainties, and expanded uncertainties.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for calibrating a unit under calibration (UUC). It specifies that if any errors are found in the UUC's zero and span, the potentiometers should be adjusted according to the customer's manual. Calibration readings should be recorded in a specified format, and calibration certificates should provide data for five calibration points including test set temperature, test readings, master sensor readings, deviations, allowed uncertainties, and expanded uncertainties.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    12 views2 pages

    Adjustment

    Uploaded by

    Charlie Dela Rosa
    The document provides instructions for calibrating a unit under calibration (UUC). It specifies that if any errors are found in the UUC's zero and span, the potentiometers should be adjusted according to the customer's manual. Calibration readings should be recorded in a specified format, and calibration certificates should provide data for five calibration points including test set temperature, test readings, master sensor readings, deviations, allowed uncertainties, and expanded uncertainties.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    10.3 Calibration Adjustment.

    If there is any error found in zero and span of the above UUC. Adjust the zero and span
    potentiometer of the UUC as per the instruction Manual given by the customer.

    11.0 Calibration Record

    Calibration Readings shall be recorded in the format MTE / FT-01/5.9

    12.0 Calibration Certificate Format

    Calibration data shall be given for 5 points.

    Test Set Test Read Master Sensor Deviatio Deviation Expanded


    Temperature Temperature reading n Allowed Uncertainty
    °C °C (Mean) °C °C °C
    °C

    10.3 Calibration Adjustment.

    If there is any error found in zero and span of the above UUC. Adjust the zero and span
    potentiometer of the UUC as per the instruction Manual given by the customer.

    11.0 Calibration Record

    Calibration Readings shall be recorded in the format MTE / FT-01/5.9

    12.0 Calibration Certificate Format


    Calibration data shall be given for 5 points.

    Test Set Test Read Master Sensor Deviatio Deviation Expanded


    Temperature Temperature reading n Allowed Uncertainty
    °C °C (Mean) °C °C °C
    °C

    You might also like