TLE 8 – AQUACULTURE SUMMATIVE TEST

Name:
Teacher: Denisse H. Adricula (Ma’am Den) Grade/Section: G8 - PINK
Contact Number: 09684944734
Directions: Write the letter of the correct answer on the
space provided.

____1. If you will repair the post digger because of loosened screws, what is the best tool to use?
A. Wrench B. Screwdrivers C.Pliers D. Hammer
____2. Andrew is making a flash board for the tertiary gate of his fishpond. He needs to make a straight line with accurate
measurement on the wood for cutting. What is the suitable tool to do the job?
A. Ruler B. Combination C. Adjustable D. Plare Nut
____3. A double - ended wrench with one end being like an open-end wrench and the other end like a box-end wrench is
referred as;
A. Socket B. Cutters C. Pliers D. Wrenches
____4. This tool is most recommended for serious digging through hard packed soil and clay.
A. Bow Rake B. Garden Shovel C.Spading Fork D. Pick and Hammock
____5. It is commonly used in general carpentry work especially nail pulling.
A. Screwdriver B. Puncher C. Ruler D. Curved Claw Hammer
____6. It consist of a socket attached to a shaft and cylindrical handle.
A. Nut Driver B.Clutch Head C. Phillip D. Standard
____7. It is the most commonly used measuring tools.
A. Meter B.Ruler C. Clutch D. Shovel
____8. These are little shovels valuable during planting season or gardening.
A. Trowel B. Sickle C. Spoon D. Bow Rake
____9. This design is ideal for removing light materials such as sawdust or dried manure.
A. Scoop Shovels B. Shower C. Sickle D. Trowel
____10. It is the mathematical determination of the quantity.
A. Calculation B. Subdivision C. Circulation D. Articulation
____11. A device used to strike or deliver blows to an object like driving nails, fitting parts and breaking up objects.
A. hammer B. plier C. wrench D. cutter
____12. It is the most popular type of measuring tools which usually has 6 or 12 inches length.
A. ruler B. speed square C. folding ruler D. try square
____13. It is a curved and hand held aquaculture tool for harvesting grain crops or cutting grasses for hay.
A. shovel B. rake C. sickle D. mattock
____14. The most versatile and widely used shovel used for digging, scooping or shoveling dirt from one point to another.
A. irrigation shovel B. round point shovel C. garden shovel D. scoop shovel
____15. A device for measuring the weight of an object.
A. paper weight B. measuring tool C. weighing scale D. square
____16. The following is not included in taking care of hand tools?
A. Clean your tools after use
B. Tools should be kept in tool box or a tool cabinet
C. When rust form on tools, remove it by using a fine abrasive cloth
D. Store hand tools in a wet, sheltered environment
____17. It is a measuring tool used for measuring the distance between two symmetrically opposing sides. It can be like a
compass with inward or outward facing points and the tips can be adjusted to fit across the points to be measured.
A. caliper B. folder ruler C. ruler D. square
____18. Quality indicators of using screwdrivers.
A. bade metal C. screwdriver tips
B. handle and bar attachment materials D. all of the above
____19. The following are the guidelines to avoid hand tools injuries except:
A. right tool for the job B. good condition C. proper storage D. watch your body
____20. A tool used to tighten or loosen screws.
A. Hammer B. screwdriver C. wrench D. pliers
____21. A simple centrifugal pump that circulates fluid/water whenever the engine is running.
A. Water pump B. Gas pump C. washing machine D. vacuum
____22. The following are different types of measuring tools except:
A. Caliper B. Ruler C. Try square D. Hammer
____23. It is a process of breeding, raising and harvesting fish, shellfish and aquatic plants.
A. Agriculture B. Aquaculture C. Broiler raising D. Poultry
____24. It is a preventive measure to increase the alkalinity of the ponds.
A. Breeding B. Leveling C. Liming D. Stock sampling
____25. A system of measurement based on the meter and the gram.
A. English system B. Scale C. Metric system D. Conversion system
____26. If 1 foot is equal to 12 inches, therefore 24 inches is equal to ____feet
A. 2 feet B. 5 feet C. 6 feet D. 7 feet
____27. If 1 yard is equal to 3 feet, therefore 15 feet is equal to ____ yard.
A. 2 yard B. 3 yard C. 4 yard D. 5 yard
____28. It is an artificial body of water surrounded by dikes and with accessories such as gates, pipes and canals.
A. Drainage B. Fish pond C. Irrigation D. Sewer

1
____29. Which does not belong to the group?
A. Combination wrench B. Adjustable wrench C. Socket wrench D. Needle-nose pliers
____30. These are little shovels valuable during planting season or gardening.
A. Hammer B. Pliers C. Trowel D. Wrench
____31. A simple centrifugal pump driven by a belt connected to the crankshaft of the engine is called water pump.
A. True B. False C. Undecided D. None of the above.
____32. . In operating the water pump, use contaminated gasoline or an oil/gasoline mixture.
A. True B. False C. Undecided D. None of the above.
____33. . Ensure that the engine has the appropriate liquid to be pumped while priming the water pump.
A. True B. False C. Undecided D. None of the above.
____34. In priming the water pump, do not open or switch battery circuits while the engine is running to prevent alternator
damage.
A. True B. False C. Undecided D. None of the above.
____35. Refractometer is designed to measure the salinity of salt water and brine and it provides a direct reading of the
specific gravity and concentration (parts per thousand) of salt in water.
A. True B. False C. Undecided D. None of the above.
____36. . 2 metric ton is equivalent to ___kilograms.
A. 1000 B. 5000 C. 2000 D. 3000
____37. 1 yard is equivalent to ___feet.
A. 2 B. 3 C. 7 D. 4
____38. They keep the steady opening of the gate.
A. . screen B. apron C. braces D. wing walls
____39. Provided at both ends of the gate floor to prevent seepage of water over the gate‘s foundation.
A. floor B. apron C. cut-off walls D. wing walls
____40. A reinforced concrete slab or thick wooden planks and span the side walls.
A. floor B. apron C. cut-off walls D. bridge

“Don’t watch the clock. Do what it does. Keep going.”