Scribd
Upload
71 views2 pages

Data Sheet LR 6HD EN

The LR-6HD is a heavy-duty 2.45 GHz RFID reader with a read range of up to 10 meters. It has integrated antenna and interfaces, is suitable for outdoor installation in all weather, and conforms to railway standards. The reader can identify tags at train speeds up to 400 km/h and is designed for applications requiring high environmental resistance like trackside railway use.

Uploaded by

Adrian Cristoaica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views2 pages

Data Sheet LR 6HD EN

The LR-6HD is a heavy-duty 2.45 GHz RFID reader with a read range of up to 10 meters. It has integrated antenna and interfaces, is suitable for outdoor installation in all weather, and conforms to railway standards. The reader can identify tags at train speeds up to 400 km/h and is designed for applications requiring high environmental resistance like trackside railway use.

Uploaded by

Adrian Cristoaica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LR-6HD Reader DATASHEET

The LR-6HD is a 2.45 GHz RFID reader with a read-range of up to 10 meter

KEY FEATURES

Heavy-duty
Read-range of up to 10 meter
Suitable for outdoor mounting in all weathers
Accurate real-time clock (RTC)
Ethernet, RS232, RS485 and Wiegand-Magstripe
interfaces
Tested and conforms to railway standards, CE and
FCC approved
General purpose inputs and outputs I/O ports
Extremely low RF power output – no site licence
required
Flexible supply voltage (10 to 30 VDC)
Licencefree worldwide

The LR-6HD is a heavy-duty 2.45 GHz RFID reader with a TagMaster’s heavy-duty readers are robust and designed
read-range up to 10 meter. It is an all in one reader with for very tough conditions. The readers are designed to
integrated antenna. The LR-6HD reader is developed for withstand vibrations as well as being highly resistant to
applications where a higher environmental classification is electrical interference. Heavy-duty also means that the
required, for example in railway solutions where track-side readers are built to withstand climatic conditions such as
mounting is required. The reader can be installed at key rain, ice and high or low temperatures.
locations such as stations, terminal entrances or mainte-
nance centres, allowing trains fitted with ID-tags to be
automatically identified. The reader’s specification has
been matched to meet the needs of the rail industry and
the LR-6HD can identify ID-tags at passage speeds of up
to 400 km/h. The reader is built around a standard Linux
operating system and has an open development platform. PART NO. INFORMATION
This enables integrators to quickly develop and implement
new applications for the LR-6HD reader. The reader can LR-6HD Reader 154610
be configured and controlled via its serial interfaces or by Universal Mounting Kit 193600
using the built-in Ethernet interface, locally or remotely
via an Internet connection.

www.tagmaster.com [email protected]

06-210-05
TECHNICAL INFORMATION

Operating frequency : CW: 2.435 to 2.465 GHz


Read range : up to 10 meter* (33 ft)
Dimensions : 290 x 165 x 56 mm (11.42 x 6.50 x 2.21 inch)
Power supply : 10 to 30 VDC (NOM 24 V)
Power consumption : 5 W (max 15 W)
Output power : 10 mW
Memory: Flash/RAM : 16MB /32MB
Operating temperature : -40°C (-40°F) to +70°C (+158°F)
Encapsulation : IP66
CE Certificate according to R&TTE-Directive 1999/5/EC, FCC M39LRXX
Certifications :
+applicable railway standards

* Reading range depends on type of ID-tag and reader settings.


Due to TagMaster’s continuous effort to develop the products in response to customer needs, the above specifications are subject to change.

www.tagmaster.com [email protected] Tel: 46 8 6321950


TagMaster AB, Kronborgsgrand 11, 164 46 Kista, Sweden
06-210-05

You might also like