Scribd
Upload
76 views2 pages

3rd Quarter - Prelim

This document contains a technology and livelihood education exam on mechanical drafting for a student at Nueva Estrella National High School. The exam has four sections: 1) Multiple choice questions testing knowledge of drafting tools, measuring tools, geometric terms and shapes. 2) Drawing and defining geometric shapes like rhombus, trapezoid, isosceles triangle, trapezium, and equilateral triangle. 3) Identifying parts of a circle like radius, diameter, chord, arc, and sector. 4) Enumerating types of lines, angles, polygons and quadrilaterals.

Uploaded by

Shiela Marie Galo Sanico-Despoy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
76 views2 pages

3rd Quarter - Prelim

This document contains a technology and livelihood education exam on mechanical drafting for a student at Nueva Estrella National High School. The exam has four sections: 1) Multiple choice questions testing knowledge of drafting tools, measuring tools, geometric terms and shapes. 2) Drawing and defining geometric shapes like rhombus, trapezoid, isosceles triangle, trapezium, and equilateral triangle. 3) Identifying parts of a circle like radius, diameter, chord, arc, and sector. 4) Enumerating types of lines, angles, polygons and quadrilaterals.

Uploaded by

Shiela Marie Galo Sanico-Despoy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Republic of the Philippines

DEPARTMENT OF EDUCATION
CARAGA Region
Division of SIARGAO
Socorro West District

NUEVA ESTRELLA NATIONAL HIGH SCHOOL


School ID: 304789| Brgy. Nueva Estrella, Socorro, Surigao Del Norte

Technology and Livelihood Education 9


MECHANICAL DRAFTING
3rd Prelim
Name: _________________________________ Date: ___________________
Grade & Section: _____________________ Score: ________________

I – MULTIPLE CHOICE

Directions: Select the drafting material and tools/drawing instrument applicable to a specific job describe in each
item.

1. A drafting tool used for drawing horizontal lines


a. Compass b. divider c. Protractor d. tape ruler
2. The most popular type of measuring tool, usually 6 or 12 inches in length.
a. Tape ruler b. triangle c. ruler d. scale
3. These are used for measuring dimensions
a. Cutting tools b. measuring tools c. lining tools d. testing tools
4. It is a concave, spring-steel blade ranging from ¼” to 1” wide and 6 to about 300 feet in length.
a. Meter stick b. tape rule c. triangle d. ruler
5. What do you call the portion of a line between two distinct points?
a. Line b. line segment c. radius d. polygons
6. These are the lines on the same plane which will not meet no matter how long you extend them.
a. Straight line b. parallel line c. perpendicular line d. All of the above
7. These are two intersecting lines which form right angle.
a. Straight line b. parallel line c. perpendicular line d. All of the above
8. It is a figure that formed by two rays with common end point.
a. Angle b. line c. line segment d. circle
9. It is an angle whose measure is 180º.
a. Straight angle b. right angle c. acute angle d. obtuse angle
10. It is an angle whose measurement is more than 90º but less than 180º.
a. Straight angle b. right angle c. acute angle d. obtuse angle
11. It is an angle whose measurement is less than 90º.
a. Straight angle b. right angle c. acute angle d. obtuse angle
12. It is a closed figure formed by a line segments intersecting at end points.
a. Circle b. polygon c. angle d. line segment
13. What do you called a polygon that has nine sides.
a. Pentagon b. hexagon c. nonagon d. triangle
14. What do you called a polygon that has five (5) sides?
a. Pentagon b. hexagon c. nonagon d. triangle
15. It is a distance around the circle.
a. Quadrant b. circumference c. chord d. segment

II – Draw and define the following geometric figures. (5 points each)

1. RHOMBUS - 2. TRAPEZOID - 3. ISOSCELES TRIANGLE-

4. TRAPEZIUM 5. EQUILATERAL TRIANGLE


III- NAME ME!

Complete the parts of a circle, which shows in the figure write your answer on a space provided. (2 pts. each)

1. ______________
3. ____________

2. ____________

5. __________________

4. _______________

6. _______________

IV – ENUMERATION

1.
2. What are the three different kinds of line?
3.
4.
5.
6.
7.
8. What are the six (6) different kinds of angles?
9.
10.
11.
12.
13.
14.
15. What are the eight different kinds of polygons?
16.
17.
18.
19. There are seven different kinds of quadrilaterals, Give me at least three (3).
20

You might also like