Scribd
Upload
429 views2 pages

R20D ID USB Reader

The R20D is a 125Khz RFID reader that can read cards from 0-100mm away. It connects to a computer via USB and outputs card data in Notepad when a card is placed near the reader. The reader uses LED lights and a buzzer to indicate its status and has a black ABS plastic body. It is suitable for access control, production, and parking management systems.

Uploaded by

pazzazzo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
429 views2 pages

R20D ID USB Reader

The R20D is a 125Khz RFID reader that can read cards from 0-100mm away. It connects to a computer via USB and outputs card data in Notepad when a card is placed near the reader. The reader uses LED lights and a buzzer to indicate its status and has a black ABS plastic body. It is suitable for access control, production, and parking management systems.

Uploaded by

pazzazzo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

R20D ID-USB reader

Introduction:
R20D is a high performance 125Khz RFID smart card Desktop reader
without driver, reader distance up to 80mm, it’s not only simple aspect,
but also stable and reliable data. Widely used for RFID Radio Frequency
Identification system and project, Such as Automated parking
management system, Personal identification, Access controller,
Production Access control, etc

Basic parameters:

project parameter
Model R20D (LF-ID Reader)
Frequency 125Khz
Support cards Em4100, TK4100, SMC4001 and compatible card

10-digit dec (Defoult output format)


Output format
(Allow user to customize the output format)
Size 104mm×68mm×10mm
Colour Black
Interface USB
Power Supply DC 5V
Operating Distance 0mm-100mm (related to the card or the environment)
Service Temperature -10℃ ~ +70℃
Store Temperature -20℃ ~ +80℃
Working humidity <90%
Read time <200ms
Read interval ＜0.5S
Weight About 140G
Cable length 1400mm
Material of reader ABS
Operating System Win XP\Win CE\Win 7\Win 10\LIUNX\Vista\Android

Double Color LED (Red & Green) and Buzzer


Indicators
(“Red” means standby, “Green” means reader success)
Usage and precautions：

1. Method of installation and use


 Connect with computer through USB interface directly. When the buzzer sounded, reader into the self-inspection. And the same time,
LED turn into red means standby.
 Open the output of computer software, such as Notepad\a word document or Excel sheets.
 The mouse in Notepad or WORD document clicking.
 Put tag on the top of reader, the software will output a data (card number) of the tag. When reading the tag, LED light change from red
to green.

2. Precautions
 Do not install the reader on the magnetic objects and metal objects, they will seriously affect the RF signal.
 If after reading, the tag is still in the induction zone, the RF reader will not send data and without any hints.

3. Common problems
 Operation without feedback: Please check whether the interface plugged in, whether the tag is a valid or whether another RF tag is
within the reading range.
 Data error: Please check Whether the mouse is moved, whether the reader is in a critical state and whether the cable length is too
long.

You might also like