This document summarizes the design of a combined footing (CF1). Key details include:
- The footing is required to support unfactored loads of 7549 kN (compression) and 9219 kN (bending).
- A footing size of 5.7m x 8.8m is provided to support the required area of 46.13 sqm.
- The footing depth is designed as 1.05m to satisfy strength requirements.
- Reinforcement of 16 bars spaced at 155mm is provided in both short and long directions to resist bending moments up to 251 kN-m and 131 kN-m respectively.
- Shear capacity is verified to exceed demand for one-
This document summarizes the design of a combined footing (CF1). Key details include:
- The footing is required to support unfactored loads of 7549 kN (compression) and 9219 kN (bending).
- A footing size of 5.7m x 8.8m is provided to support the required area of 46.13 sqm.
- The footing depth is designed as 1.05m to satisfy strength requirements.
- Reinforcement of 16 bars spaced at 155mm is provided in both short and long directions to resist bending moments up to 251 kN-m and 131 kN-m respectively.
- Shear capacity is verified to exceed demand for one-
This document summarizes the design of a combined footing (CF1). Key details include:
- The footing is required to support unfactored loads of 7549 kN (compression) and 9219 kN (bending).
- A footing size of 5.7m x 8.8m is provided to support the required area of 46.13 sqm.
- The footing depth is designed as 1.05m to satisfy strength requirements.
- Reinforcement of 16 bars spaced at 155mm is provided in both short and long directions to resist bending moments up to 251 kN-m and 131 kN-m respectively.
- Shear capacity is verified to exceed demand for one-
This document summarizes the design of a combined footing (CF1). Key details include:
- The footing is required to support unfactored loads of 7549 kN (compression) and 9219 kN (bending).
- A footing size of 5.7m x 8.8m is provided to support the required area of 46.13 sqm.
- The footing depth is designed as 1.05m to satisfy strength requirements.
- Reinforcement of 16 bars spaced at 155mm is provided in both short and long directions to resist bending moments up to 251 kN-m and 131 kN-m respectively.
- Shear capacity is verified to exceed demand for one-
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
You are on page 1/ 1
COMBINED FOOTING DESIGN FOOTING NAME: CF1
Load Data : DL+%LL EQ or Wind
P kN 7549.00 9219.00 Fy = 500 N / mm2 FX kN 39.00 263.00 Fck = 25 N / mm2 Fy kN 10.00 77.00 MX kN m 8.00 154.00 S.B.C = 180 kN / m2 My kN m 40.00 845.00
Area required : = 8303.9 = 46.133 m2
180 Provide Footing Size = 5.7 x 8.8 Area Provided = 50.16 m2 OK Depth of Footing : Provided Depth D = 1.05 m Provide Initial D = 0.99 m Effective Depth deff = 1 m Additional Moments: Mx1 = 39 kN-m My1 = 10 kN-m Final Loads : P = 7549 Kn Mx = 47 kN-m My = 50 kN-m Net upward pressure Pmax = 152 kN / m2 OK For Design P = 155 kN / m2 Pmin = 149 kN / m2 OK Check For EQ or Wind Loads: Pmax = 199 kN / m2 OK For Check P = 225 kN / m2 Pmin = 169 kN / m2 OK
Design for Flexure: Shorter - Direction:
Maximum cantilever projection = 1.8 m 2 M = 155.00 X 1.8 2 M = 251.100 kN-m K = Mu/bd2 = 0.377 Pt = 0.088 Provide 0.12% Ast = 1260 mm2 Provide 16 @ 155 C/C
Design for Flexure: Longer - Direction:
Maximum cantilever projection = 1.3 m 2 M = 155.00 X 1.3 2 M = 130.975 kN-m K = Mu/bd2 = 0.196 Pt = 0.046 Provide 0.12% Ast = 1260 mm2 Provide 16 @ 155 C/C
Check for One-Way Shear:
tv = 155.00 X ( 1.800 - 1 ) X 1.5 1000 tv = 0.186 N / mm2 tc = 0.272 N / mm2 > tv OK
Check for Punching Shear:
Size of the Column C = 300 X 1200
Max Unfactored Load P = 2500.00 kN
Allowable Shear Stress t allowable = 0.938 N / mm2 Actual Shear Stress t actual = 0.442 N / mm2 < t allowable OK
