Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    Saic A 1004

    Uploaded by

    usman
    This document is a fill placement and compaction inspection checklist for a Saudi Aramco project. It lists acceptance criteria for items like lift thickness, compaction levels, and grading. Key requirements include compacting fill to at least 90% density under structures, constructing horizontal benches on slopes over 1:5, and finish grading compacted surfaces. The checklist will be used to inspect and verify that fill placement and compaction meets the specified standards.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Saic A 1004

    Uploaded by

    usman
    23 views2 pages
    This document is a fill placement and compaction inspection checklist for a Saudi Aramco project. It lists acceptance criteria for items like lift thickness, compaction levels, and grading. Key requirements include compacting fill to at least 90% density under structures, constructing horizontal benches on slopes over 1:5, and finish grading compacted surfaces. The checklist will be used to inspect and verify that fill placement and compaction meets the specified standards.

    Original Title

    SAIC-A-1004

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a fill placement and compaction inspection checklist for a Saudi Aramco project. It lists acceptance criteria for items like lift thickness, compaction levels, and grading. Key requirements include compacting fill to at least 90% density under structures, constructing horizontal benches on slopes over 1:5, and finish grading compacted surfaces. The checklist will be used to inspect and verify that fill placement and compaction meets the specified standards.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    23 views2 pages

    Saic A 1004

    Uploaded by

    usman
    This document is a fill placement and compaction inspection checklist for a Saudi Aramco project. It lists acceptance criteria for items like lift thickness, compaction levels, and grading. Key requirements include compacting fill to at least 90% density under structures, constructing horizontal benches on slopes over 1:5, and finish grading compacted surfaces. The checklist will be used to inspect and verify that fill placement and compaction meets the specified standards.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    SAUDI ARAMCO ID/PIEU-31-December-2018 - REV.2018.12.00 (Standards Cutoff - December 31,2018) Rev.2018.12.

    00 31-Dec-18

    SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER DATE APPROVED QR NUMBER

    Fill Placement and Compaction Inspection SAIC-A-1004 4-Mar-19 CIVIL-


    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

    LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

    SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
    SAUDI ARAMCO USE ONLY
    SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

    SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

    ITEM
    ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
    No.

    Fill Placement Inspection

    SAES-A-114
    A1 Fill material shall be placed in lifts not exceeding 200mm in loose depth.
    Sec. 6.3..3.1

    Fill material shall be placed in lifts not exceeding 100mm in loose depth SAES-A-114
    A2
    for hand-operated compaction. Sec. 6.3.3.3

    Other lift thicknesses shall be allowed with approval by the Saudi Aramco
    SAES-A-114
    A3 Inspector based on a field test of the method, equipment and materials
    Sec. 6.3.3.4
    involved.

    Fill and backfill adjacent to any type of structure shall not be compacted
    SAES-A-114
    A4 with heavy equipment; Hand operated equipment shall be used within 1.2
    Sec. 6.3.5.1
    meters of any structures.

    Every effort shall be made to place backfill materials symmetrically and in


    SAES-A-114
    A5 uniform layers to prevent unnecessary eccentric loading on a structure or
    Sec. 6.3.5.1
    foundation.

    Compacted surfaces of fill and backfill shall be finish graded to the cross SAES-A-114
    A6
    sections, lines, grades and elevations as indicated on the drawings. Sec. 6.3.7

    Backfilling and removal of trench supports shall be accomplished by


    backfilling up to a level allowing for removal of the lower braces; Another SACSM
    A7
    layer of backfill shall then be positioned in the trench to the next layer of Part II, Sec. 1.14
    braces to be removed.

    Removal of trench supports or shoring shall progress together with the


    SACSM
    A8 backfill from the bottom of the trench; In unstable soil, ropes shall be used
    Part II, Sec. 1.14
    to pull supporting materials from the trench.

    B Compaction Inspection

    Compaction shall begin only after the fill or backfill has been properly
    placed and the material to be compacted is at the proper moisture SAES-A-114
    B1
    content. +/- 3% of the optimum moisture content per ASTM D1557 or Sec. 6.3.4
    ASTM D698, whichever is applicable. (PIP-CVS02100, Sec. 4.3.7.7.3)

    SAES-A-114
    B2 Compaction shall be performed with equipment compatible with soil type.
    Sec. 6.3.5

    Fill or backfill placed beneath footings, grade beams, mats, buildings or


    SAES-A-114
    B3 process areas shall be compacted to at least 90% of the maximum
    Sec. 6.3.6.1
    Modified Proctor density as determined by ASTM D1557.

    Saudi Aramco: Company General Use


    For cohesionless free draining soils, 70% relative density as determined
    SAES-A-114
    B4 by ASTM D4253 and ASTM D4254 shall be achieved under footings,
    Sec. 6.3.6.1
    grade beams, mats, buildings or process areas.

    Under foundations with static loads over 320kPa and foundations for
    vibrating or heavy machinery and pavements, 85% of relative density SAES-A-114
    B5
    (ASTM D4253/ASTM D4254) for cohesionless soils or 95% of of the Sec. 6.3.6.2
    maximum density as determined by ASTM D1557 for cohesive materials.

    When the backfill material cannot clearly be classified as cohesive or


    cohesionless both relative density and Proctor density tests must be SAES-A-114
    B6
    performed per the above paragraph. The backfill shall then be compacted Sec. 6.3.6
    to the greater density.

    Compaction by water jetting is not permitted; Flooding may be used if the SAES-A-114
    B7
    material is cohesionless freely draining sand. Sec. 6.3.5.2

    In no case shall compaction be allowed on slopes greater than 1 to 5; A


    SAES-A-114
    B8 series of horizontal benches, steps, or terraces, at least 3 meters wide
    Sec. 6.3.2.1
    should be constructed and compacted instead.

    Construction of new slopes shall be accomplished by compacting


    SAES-A-114
    B9 horizontal fill layers at least 1 roller width beyond the design edge of the
    Sec. 6.3.2.2
    slope then trimming back to achieve the final slope dimensions.

    Compacted surfaces of fill and backfill shall be finish graded to the cross
    SAES-A-114
    B10 sections, lines, grades and elevations as indicated on the drawings (PIP
    Sec. 6.3.7
    CVS 02100 Sec 4.3.7.12)

    REMARKS:

    REFERENCE DOCUMENTS:
    1- SAES-A-114 -- Excavation and Backfill, 13 December 2018
    2- SACSM -- Saudi Aramco Construction Safety Manual, October 2011
    3- PIP CVS02100 -- Site Preparation, Excavation and Backfill Specification, April 2007
    Contractor / Third-Party Saudi Aramco
    Construction Representative* PMT Representative
    Work is Complete and Ready for Inspection: T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Inspector PID Representative


    Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Supervisor Proponent and Others


    Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
    Name, Organization,
    Name, Sign and Date:
    Initials and Date:

    *Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED

    Saudi Aramco: Company General Use

    You might also like