Hand Dryers: Sensor Operated Smartflow M04A

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HAND DRYERS

SENSOR OPERATED Smartflow M04A

M04A M04AB M04AC M04ACS


White finish Matte black finish Bright finish Satin finish
General description Technical Specifications
 The economic line of Smartflow® hand dryers is one of the
most compact in the market, designed for locations that Voltage 220- 240 V
because of their size require small sized washroom Frequency 50/60 Hz
accessories that meet two requirements: low consumption
and optimum hand drying. Electrical Isolation Class II
 These units are automatic dryers that offer an optimum Total power 1,100 W
relationship between functionality and price. Because of its
Consumption 4.8 A
features and design, this economic line is intended to be
installed in areas with a medium traffic of people like for Motor power 150 W
example medium sized restaurants, cafeterias or the offices
of a small or medium sized company. Rpm 15,000
 Four models with different finishes are available: white, matte Heating element power 950 W
black, bright and satin. All of them with an ABS resistant
Dimensions 259x147x138 mm.
cover and electronic detection sensor by infrared beam with
adjustable distance detection, that allows a better adaptability Weight 1.2 Kg
to different types of washrooms.
Cover thickness 3 mm
 These dryers also provide maximum safety, with a safety
thermal cut off installed in the motor and another one in the Drying time 39 sec.
dryer’s heating element.
Effective airflow 102 m3/h (1,700 L/min)
Components and materials Air velocity 100 Km/h
 M04A: White ABS thermoplastic one-piece cover, 3 mm thick. Air temperature (10 cm 55 OC
Cover fixed to the base by means of 2 screws. distance/21ºC)
 M04AB: Matte black ABS thermoplastic one-piece cover, 3 Sound pressure (at 2m) 67 dBA
mm thick. Cover fixed to the base by means of 2 screws.
Protection rating IP23
 M04AC: Bright finish ABS thermoplastic one-piece cover, 3
mm thick. Cover fixed to the base by means of 2 screws. Dimensions
 M04ACS: Satin finish ABS thermoplastic one-piece cover, 3
mm thick. Cover fixed to the base by means of 2 screws.
.

 BASE PLATE: made of thermoplastic PP + talcum with 4 Ø 6


mm holes for wall mounting.
 MOTOR: universal brush motor, 15,000 rpm, which includes
a safety thermal cut-off.
 FAN WHEEL: fire resistant plastic PP-V0 helicoidal fan
wheel.
 HEATING ELEMENT: waved wire NiCr heating element on a
mica frame that incorporates a safety thermal cut-off.
 DETECTION SENSOR: fully adjustable (5-25 cm) IR
electronic detection sensor by means of a potentiometer.

Dimensions: ± 4

8-OP-DO-FT
Operation
Place the hands under the air outlet. The dryer will start automatically, and go on with no interruption as long as the hands are kept in
the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.

Mounting Recommended heights distance from the floor

Certificates and qualifications

Mediclinics, S.A., reserves the right to make changes and/or modifications to the products and their specifications without prior notice.
Review 10-20 © mediclinics S.A.

8-OP-DO-FT

You might also like