BOQ for Kaveri - Residential Building

SSR Refere
Sr.
Item nce Description of Work Nos. L B H Qty Units
No
no. No.
Green Kantan : Providing and fixing Jute
Kantan (Tarat) screen to the scaffold-ing for
1 46.38 BDW external guniting as directed including
removing the same after the work is over etc.
complete
2 14 20 560 Sq m
2 9 20 360 Sq m
920 Sq m

Chipping of unsound/weak concrete material

from slabs, beams, columns etc. with manual
Chisel and/ or by standard power driven
percussion type or of approved make
26.28. CPWD
including tapering of all edges, making square
2, DSR
2 shoulders of cavities including cleaning the
Page 2021
exposed concrete surface and reinforcement
2094 Vol-2
with wire brushes etc. and disposal of debris
for all lead and lifts all complete as per
direction of Engineer-In-Charge. 50 mm
average thickness.
Slab - 5% 12.55 Sqm
Beam - 15% 134.25 Sqm
Column - 20% 224 Sqm
Stilt columns 105.6 Sqm
476.4 Sqm
Contingency - 10 % 47.64 Sqm
524.04 Sqm

Providing, drilling and fixing Nipples for

3 51.15 BR pressure injection grouting of polymer cement
grout etc. complete
524.04 Sqm
Consider 2 Nozzles per Sqm 1048 Nos
Contingency-10 % 105 Nos
1153 Nos

Providing and injecting epoxy grout including

structuring of crack in the body of slab girder
by sand blasting, fixing inlet tube arrangement
4 16.01 BR
including cost of materials, machinery
required for the work and labour charges etc.
complete.
Consider Grout at 50 ml per Nozzle
No of Nozzles 1048 Nos
 Epoxy Grout required 52.404 Kg
Contingency-10 % 5.2404 Kg
57.64 Kg

Supplying, Drilling/Cleaning hole and

injecting chemical. Application to be designed
separately for Rebars as Simply Supported,
Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar
guidelines. The chemical should have ETA
approval for seismic rebar as a minimum
qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling
resin and hardener using serrated nozzle to
5 53.03 BDC 2
eliminate mixing error with standard HDE
A22 battery dispenser along with piston plug.
The installation and the setting instructions
should be strictly followed as per the
manufacturer‘s recommendations. The
adequate diameter and embedment of rebars to
be decided as per PROFIS Rebar Software &
the report to be submitted to the project
manager/ design engineer for approval.
Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -12 mm dia
240mm depth

Column Shear Connector 30Nos in each

20
colulmn 600 Nos

Contingency-10 % 60 Nos
660 Nos
 Supplying, Drilling/Cleaning hole and
injecting chemical. Application to be designed
separately for Rebars as Simply Supported,
Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar
guidelines. The chemical should have ETA
approval for seismic rebar as a minimum
qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling
6 53.04 BDC 2
resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE
A22 battery dispenser along with piston plug.
The installation and the setting instructions
should be strictly followed as per the
manufacturer‘s recommendations. The
adequate diameter and embedment of rebars to
be decided as per PROFIS Rebar Software &
the report to be submitted to the project
manager/ design engineer for approval.
Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -16 mm dia
320mm depth
16mm dia anchoring in beam say 8nos per
20
column bottom and top 160 Nos
Contingency-10 % 16 Nos
176 Nos

Providing and fixing additional reinforcement

7 19.42 BR to replace the corroded diameter of existing
steel for strengthening purpose.
8 kg per Sqm 4192.32 Kg

Re-casting of bracket with micro-concrete and

8 19.26 BR 10 mm agrregate ( 1:1) with leakproof
shuttering all manpower and equipments
complete in all respect
Beam - 15% 134.25 Sqm
Stilt columns 105.6 Sqm
239.85 Sqm
Contingency - 10 % 23.985 Sqm
263.835 Sqm
Consider 60 mm thk Repairing 15.830 Cum
 Providing Repairing of honeycombs and
minor damages with Polymer Modified Morter
9 19.2 BR
including material,labour complete in all
respect.
30 mm thick and 2000 kg/cum density 31442.4 Kg
Contingency - 10 % 3144.24 Kg
34586.64 Kg

Corrosion protection of unexposed old

reinforcement on non-spalled concrete by
Insertion of sustained release Corrosion
inhibiting caplets like Powrthrow which
protect both anodic & cathodic sites and
reduces Corrosion potential Ecorr by
minimum 80 mV in conductive medium, by
drilling 20-22 mm dia holes into the concrete
at a depth of 30-40 mm and inserts to be filled
by epoxy sealant EPCO-1010. Caplets shall
inhibit corrosion inhibition efficiency of 98%
(when added 0.03 % by weight) against
control sample evaluated by Tafel polarization
10 47.17 BDSS
method. Depth of penetration for effective
corrosion protection shall be 120mm & film
formation of 20 Microns as evaluated by CSIR-
CECRI Karaikudi.Spacing of Powrthrow shall
be : a) For RCC
Columns- 1 Units in a single drilled hole at a
spacing of 1m c/c from two opposite faces in
staggered fashion
b) For RCC Beams- 1 Units in a single drilled
hole at a spacing of 1m c/c from two opposite
faces in staggered fashion
c) RCC Slab- 4 Units in a single drilled hole
in 1 sqm area in a grid pattern
Slab - 15% 37.65 Sq m
Beam - 10% 89.5 Sq m
Column - 20% 224 Sq m
351.15 Sq m
Contingency - 10 % 35.115 Sq m
386.265 Sq m
 Providing & Applying chemical for cleaning
the exposed steel structure, TMT bars, etc. of
structure by grinding the surface by grinder
machine, wire brush, removing existing
corrosion from the metal also removing loose
particles, of the area by water jet, (using other
mechanical / manual means) and apply on
prepared surface of as corrosion preventive
coat on prepared TMT bars, steel
structure,metal surface etc. to protect it from
corrosion etc. as per manufacturer's
specification ( using other manual / mechinical
means) after that Providing and applying high
abrasive resistant, self curing, UV
11 47.01 BDSS
resistant,impermeable ,high strength, non
shrink, Poly Ironite Ceramic Cementatious
(PICC) repair mortar resurfacing on concrete
surface of thickness up to 10 mm including
breaking honey comb area, (using
manual/mechanical means) , clean the
concrete surface with special chemical clonon
with pressure water jet for removing of algae
fungi, apply bond coat Kelox water misible
epoxy before PICC application with all leads
and lifts, Material, Machinery, labour,
scaffolding, etc. complete as per specification
and as directed by engineer-in charge
Same as above Item no. 2 524.04 Sq m

Providing and applying Kelox R 101 (Resin) +

Kelox H 404 (Hardner) water misible epoxy of
approved make for bonding old concrete to
new moratr after mixing slowely in predefined
ratio and applying by brush on the surface,
12 47.16 BDSS
when it is tacky then apply the moratr
complete as per specification and as directed
by engineer-in-charge. Work shall be executed
by certified applicator only and work shall be
guaranteed for 5 years and guarantee shall be
provided on Rs. 500 /- stamp paper
Same as above Item no. 2 524.04 Sq m
 Providing and applying 30 mm thick self
curing Ceremic Polymer Microconcrete of
approved make having Compressive strength
above M30, non shrink, impermeable , filling
mortar to load carrying R.C.C member in two
layers on cleaned concrete surface , including
honey comb area (using manual/mechanical
means). Mixing mortar of Nicosil C80 and
fresh 53 grade cement with required water
13 47.15 BDSS cement ratio for desired consistency and
applying and finishing by manual trawelling ,
curing after curing initial setting time etc, as
per manufacturers specification etc. complete
as per specification and as directed by
engineer in- charge. Work shall be executed
by certified applicator only and work shall be
guaranteed for 5 years and guarantee shall be
provided on Rs. 500 /- stamp paper. (Bond
coat mentioned below is to be done before
coating)
Same as above Item no. 2 524.04 Sq m

Scrapping the old plastered internal surface

with sand paper and coating the entire surface
14 36.19 BDP with mixture of whiting or glue and linseed oil
including scaffolding etc. complete as
directed.
Flat no. C2
Living Room 2 3.8 3.3 25.080 Sq m
2 4.6 3.3 30.360 Sq m
1 3.8 4.6 17.480 Sq m
Bedroom 1 2 3.1 3.3 20.460 Sq m
2 3.5 3.3 23.100 Sq m
1 3.1 3.5 10.850 Sq m
Bedroom 2 2 3.1 3.3 20.460 Sq m
2 3 3.3 19.800 Sq m
1 3.1 3 9.300 Sq m
Kitchen 2 1.5 3.3 9.900 Sq m
2 3.5 3.3 23.100 Sq m
1 1.5 3.5 5.250 Sq m
W.C + Bath 1 2 3.1 3 18.600 Sq m
2 1 3 6.000 Sq m
1 3.1 1 3.100 Sq m
W.C + Bath 1 2 3.1 3 18.600 Sq m
2 1.2 3 7.200 Sq m
1 3.1 1.2 3.720 Sq m
Passage 2 3.5 3.3 23.100 Sq m
2 1 3.3 6.600 Sq m
 1 3.4 1 3.400 Sq m
Flat no. C5
Living Room 2 7.6 3.3 50.160 Sq m
2 4.6 3.3 30.360 Sq m
1 7.6 4.6 34.960 Sq m
Bedroom 1 2 3.1 3.3 20.460 Sq m
2 3.3 3.3 21.780 Sq m
1 3.1 3.3 10.230 Sq m
Bedroom 2 2 2.8 3.3 18.480 Sq m
2 3.1 3.3 20.460 Sq m
1 2.8 3.1 8.680 Sq m
Bedroom 3 2 3.1 3.3 20.460 Sq m
2 3.2 3.3 21.120 Sq m
1 3.1 3.2 9.920 Sq m
Bedroom 4 2 3.1 3.3 20.460 Sq m
2 3 3.3 19.800 Sq m
1 3.1 3 9.300 Sq m
Bedroom 5 2 3.1 3.3 20.460 Sq m
2 2.6 3.3 17.160 Sq m
1 3.1 2.6 8.060 Sq m
Bath 1 2 2.2 3 13.200 Sq m
2 1.2 3 7.200 Sq m
1 2.2 1.2 2.640 Sq m
W.C 1 2 1.6 3 9.600 Sq m
2 1 3 6.000 Sq m
1 1.6 1 1.600 Sq m
Passage 1 2 2.5 3.3 16.500 Sq m
2 2.2 3.3 14.520 Sq m
1 2.2 2.5 5.500 Sq m
Bath 2 2 1.2 3 7.200 Sq m
2 1.8 3 10.800 Sq m
1 1.2 1.8 2.160 Sq m
W.C 2 2 1.2 3 7.200 Sq m
2 1.8 3 10.800 Sq m
1 1.2 1.8 2.160 Sq m
Passage 2 2 1.3 3.3 8.250 Sq m
2 2.4 3.3 15.576 Sq m
1 1.3 2.36 2.950 Sq m
Staircase & Passage
8 2.5 3.5 70.000 Sq m
8 4.5 4 144.000 Sq m
8 4.2 1.5 50.400 Sq m
8 2.5 1.5 30.000 Sq m
1106.026 Sq m
10 % for offsets 110.603 Sq m
Terrace
Parapet wall 1 50 1.7 85.000 Sq m
Headroom 2 2.5 3 15.000 Sq m
2 4.5 3 27.000 Sq m
 1 2.5 4.5 11.250 Sq m
Chajja 2 4 1.5 12.000 Sq m
1 7 0.2 1.400 Sq m
1368.279 Sq m
Contingency - 10 % 136.828 Sq m
1505.106 Sq m

Providing and fixing double scaffolding

system (cup lock type) on the exterior side of
building/structure, including additional rows
of scaffolding in stepped manner as per
requirement of site, made with 40mm dia M.S.
tube, placed 1.5 metre centre to centre,
horizontal & vertical tubes joint with cup &
lock system with M.S. Tubes, M.S. tube
challis, M.S. clamps and staircase system in
the scaffolding for working platform etc. and
maintaining it in a serviceable condition for
15 46.42 BDW execution of work of cleaning and/ or pointing 1265 Sq m
and/ or applying chemical and removing it
thereafter. The scaffolding system shall be
stiffened with bracings, runners, connecting
with the building etc, wherever required, if
feasible, for inspection of work at required
locations with essential safety features for the
workmen etc., complete as per directions and
approval of Engineer-in charge. Note:- (1)
The elevational area of the scaffolding shall be
measured for payment purpose. (2) The
payment will be made once only for execution
of all items for such works.

Removing the existing cement plaster of any

thickness without causing dust nuisance and
16 32.33 BDL stacking the debris upto a distance of 50
metres or spreading in the compound and
cleaning the site etc. complete
External Face 1 50 20 1000 Sq m
Considering 15 % for offsets 150 Sq m
1150.000 Sq m
Contingency - 10 % 115.000 Sq m
1265.000 Sq m
 Providing sand faced plaster externally in
cement mortar using approved screened sand,
in all positions including base coat of 15 mm
thick in cement mortar 1:4 using
waterproofing compound at 1Kilogramper
17 32.11 BDL 7
cement bag curing the same for not less than 2
days and keeping the surface of the base coat
rough to receive the sand faced treatment 6 to
8 mm thick in cement mortar 1:4 finishing the
surface by taking out grains and curing for
fourteen days scaffolding etc.complete.
External Face 1 50 20 1000 Sq m
Considering 15 % for offsets 150 Sq m
1150.000 Sq m
Contingency - 10 % 115.000 Sq m
1265.000 Sq m

Lowering down the debris obtained from

breaking and removing the cement plaster /
burnt brick masonry of the first floor by any
18 46.59 BDW means without causing dust nuisance and 150 Cu m
damage to structure, stacking the same as and
where directed including cleaning the site
complete

Lowering down the debris obtained from

breaking and removing the cement plaster /
burnt brick masonry of the Second floor by
19 46.59 BDW any means without causing dust nuisance and 112 Cu m
damage to structure, stacking the same as and
where directed including cleaning the site
complete

Lowering down the debris obtained from

breaking and removing the cement plaster /
burnt brick masonry of the Third floor by any
20 46.59 BDW means without causing dust nuisance and 160 Cu m
damage to structure, stacking the same as and
where directed including cleaning the site
complete

Lowering down the debris obtained from

breaking and removing the cement plaster /
burnt brick masonry of the Terrace floor by
21 46.59 BDW any means without causing dust nuisance and 30 Cu m
damage to structure, stacking the same as and
where directed including cleaning the site
complete
 Providing internal cement plaster 12mm thick
in single coat in cement mortar 1:5 without
22 32.03 BDL 2 neeru finish to concrete or brick surfaces, in
all positions including scaffolding and curing
etc. complete.
Same as above Item no.13 1505.106 Sq m

Providing and applying plaster with plaster of

paris in 6mm thickness to previously plaster
23 32.27 BDL
surface in all position including preparing the
surface scaffolding etc. complete.
Same as above Item no. 22 1505.106 Sq m

Providing and applying Two coats of wall care

24 32.34 BDL Putty on plastered surface and Ceiling and
Walls to prepare surface even and smooth of
approved make, etc complete.
Same as above Item no. 23 1505.106 Sq m

Providing and applying 2 Coats of 100% Pure

acrylic low VOC water based paint with to
withstand for period of atleast 5 years of
approved make. Paint should provide durable
long lasting silk finish with high resistance to
UV and resistance to spreading of flame. Paint
should protect against concrete carbonation
25 48.14
with R value of minimum 600 and ability to
built cracks upto min 0.7mm. The paint has to
be applied on High quality water based acrylic
copolymer primer with good alkali resistance
properties. With all leads and lifts at all levels
etc. complete, as directed by Engineer in
charge.
Flat no. C2
Living Room 2 3.8 3.3 25.080 Sq m
2 4.6 3.3 30.360 Sq m
1 3.8 4.6 17.480 Sq m
Bedroom 1 2 3.1 3.3 20.460 Sq m
2 3.5 3.3 23.100 Sq m
1 3.1 3.5 10.850 Sq m
Bedroom 2 2 3.1 3.3 20.460 Sq m
2 3 3.3 19.800 Sq m
1 3.1 3 9.300 Sq m
Kitchen 2 1.5 3.3 9.900 Sq m
2 3.5 3.3 23.100 Sq m
1 1.5 3.5 5.250 Sq m
W.C + Bath 1 2 3.1 3 18.600 Sq m
 2 1 3 6.000 Sq m
1 3.1 1 3.100 Sq m
W.C + Bath 1 2 3.1 3 18.600 Sq m
2 1.2 3 7.200 Sq m
1 3.1 1.2 3.720 Sq m
Passage 2 3.5 3.3 23.100 Sq m
2 1 3.3 6.600 Sq m
1 3.4 1 3.400 Sq m
Flat no. C5
Living Room 2 7.6 3.3 50.160 Sq m
2 4.6 3.3 30.360 Sq m
1 7.6 4.6 34.960 Sq m
Bedroom 1 2 3.1 3.3 20.460 Sq m
2 3.3 3.3 21.780 Sq m
1 3.1 3.3 10.230 Sq m
Bedroom 2 2 2.8 3.3 18.480 Sq m
2 3.1 3.3 20.460 Sq m
1 2.8 3.1 8.680 Sq m
Bedroom 3 2 3.1 3.3 20.460 Sq m
2 3.2 3.3 21.120 Sq m
1 3.1 3.2 9.920 Sq m
Bedroom 4 2 3.1 3.3 20.460 Sq m
2 3 3.3 19.800 Sq m
1 3.1 3 9.300 Sq m
Bedroom 5 2 3.1 3.3 20.460 Sq m
2 2.6 3.3 17.160 Sq m
1 3.1 2.6 8.060 Sq m
Bath 1 2 2.2 3 13.200 Sq m
2 1.2 3 7.200 Sq m
1 2.2 1.2 2.640 Sq m
W.C 1 2 1.6 3 9.600 Sq m
2 1 3 6.000 Sq m
1 1.6 1 1.600 Sq m
Passage 1 2 2.5 3.3 16.500 Sq m
2 2.2 3.3 14.520 Sq m
1 2.2 2.5 5.500 Sq m
Bath 2 2 1.2 3 7.200 Sq m
2 1.8 3 10.800 Sq m
1 1.2 1.8 2.160 Sq m
W.C 2 2 1.2 3 7.200 Sq m
2 1.8 3 10.800 Sq m
1 1.2 1.8 2.160 Sq m
Passage 2 2 1.3 3.3 8.250 Sq m
2 2.4 3.3 15.576 Sq m
1 1.3 2.36 2.950 Sq m
Staircase & Passage
8 2.5 3.5 70.000 Sq m
8 4.5 4 144.000 Sq m
8 4.2 1.5 50.400 Sq m
 8 2.5 1.5 30.000 Sq m
10 % for offsets 29.500 Sq m
1135.526 Sq m
Deductions for flat C2
D 1 1.3 2.1 2.730 Sq m
D1 3 1 2.1 6.300 Sq m
D2 2 0.9 2.1 3.780 Sq m
W 1 1.8 1.5 2.700 Sq m
V1 1 0.5 1 0.500 Sq m
W1 1 2 1.2 2.400 Sq m
V2 1 0.5 0.5 0.250 Sq m
W2 1 1.5 1.2 1.800 Sq m
Deductions for flat C5
D 1 1.3 2.1 2.730 Sq m
D1 8 1.2 2.1 20.160 Sq m
D2 4 1 2.1 8.400 Sq m
W 2 1.8 1.5 5.400 Sq m
V1 2 0.5 1 1.000 Sq m
W1 2 2 1.2 4.800 Sq m
V2 2 0.5 0.5 0.500 Sq m
W2 2 1.5 1.2 3.600 Sq m
W3 2 0.5 1.2 1.200 Sq m
68.250 Sq m
Internal Paint 1067.276 Sq m
Contingency - 10 % 106.728 Sq m
1174.004 Sq m

Removing old paint from steel and other metal

26 35.18 BDO 8Bsurfaces and making the surfaces even with
hand scrapping, scaffolding etc. complete
For flat C2
W 1 1.8 1.5 2.700 Sq m
V1 1 0.5 1 0.500 Sq m
W1 1 2 1.2 2.400 Sq m
V2 1 0.5 0.5 0.250 Sq m
W2 1 1.5 1.2 1.800 Sq m
For Flat C5
W 2 1.8 1.5 5.400 Sq m
V1 2 0.5 1 1.000 Sq m
W1 2 2 1.2 4.800 Sq m
V2 2 0.5 0.5 0.500 Sq m
W2 2 1.5 1.2 3.600 Sq m
W3 2 0.5 1.2 1.200 Sq m
Steel support 5 7 0.2 7 Sq m
2 8 0.3 4.8 Sq m
Ladder 1 1.2 4 4.8 Sq m
40.750 Sq m
Offsets -10 % 44.825 Sq m
 Contingency - 10 % 4.483 Sq m
49.308 Sq m

Providing and applying priming coat over

new/old steel and other metal surfaces
including preparing the surface by thoroughly
27 35.2 BDO 8D cleaning oil, grease, dirt and other foreign
matter and scoured with wire brushes, fine
steel wool, scrappers and sand paper,
scaffolding etc. complete.
For flat C2
W 1 1.8 1.5 2.700 Sq m
V1 1 0.5 1 0.500 Sq m
W1 1 2 1.2 2.400 Sq m
V2 1 0.5 0.5 0.250 Sq m
W2 1 1.5 1.2 1.800 Sq m
For flat C5
W 2 1.8 1.5 5.400 Sq m
V1 2 0.5 1 1.000 Sq m
W1 2 2 1.2 4.800 Sq m
V2 2 0.5 0.5 0.500 Sq m
W2 2 1.5 1.2 3.600 Sq m
W3 2 0.5 1.2 1.200 Sq m
Steel support 5 7 0.2 7 Sq m
2 8 0.3 4.8 Sq m
Ladder 1 1.2 4 4.8 Sq m
40.750 Sq m
Offsets -20 % 48.9 Sq m
Contingency - 10 % 4.890 Sq m
53.790 Sq m

Providing and applying two coats of synthetic

enamel paint of approved colour to new /old
28 35.07 BDO 5 structural steel work and wood work in
buildings, including scaffolding if necessary,
cleaning and preparing the surface (excluding
primer coat) etc. complete.
Handrail 1 20 0.4 8 Sq m
Doors
D 5 1.4 2.1 14.700 Sq m
D1 11 1.2 2.1 27.720 Sq m
Door frame
D 10 0.1 2.1 2.100 Sq m
5 0.1 1.4 0.700 Sq m
D1 8 0.1 2.1 1.680 Sq m
11 0.1 1.2 1.320 Sq m
48.220 Sq m
Contingency - 10 % 4.822 Sq m
 53.042 Sq m

Providing and applying external raincoat

painting with crack filling acrylic polymer
based chemical compound coating to the
external surface of walls to prevent water
seepage in the masonry walls during monsoon
added with required shade Steiner to give
required shade to the surface in two coats.
Including providing three coat of priming of
polymer base primer including preparing
surface scrapping the existing loose old paint,
removing loose particles of sand on the
29 35.29 BDO
surface opening and cleaning the cracks
developed in the external plaster, removing
loose particles by chiseling, filling cracks by
chemicals compound of approved make with
proper penetration etc. Coating of Raincoat
with the help of brush and as per instructions
and specification given by manufacturer and
with instruction from Engineer in charge.
Work shall be executed by certified applicator
only and covering gurantee of 3 years on court
stamp paper of Rs. 500/- and necessary testing
etc. complete.
External Face 1 50 20 1000 Sq m
Considering 15 % for offsets 150 Sq m
Contingency - 10 % 115 Sq m
1265 Sq m

Providing and applying two coats of exterior

acraylic emulsion paint confirming to
corresponding I.S. of approved manufacture
and of approved colour to the plastered
30 35.25 BDO
surfaces including cleaning ,preparing the
plaster surface, applying primer coat
,scaffolding if necessary , and watering the
surface for two days etc complete
Same as above Item no. 28 1265 Sq m

Providing and laying ceramic tiles of having

size 30 cm. x 30 cm. and confirming to
corresponding I.S. for dado and skirting in
required position with readymade adhesive
31 33.25 BDM 13
mortar of approved quality on plaster of 1:2
cement mortar including joint filling with
white/ colour cement slurry cleaning curing
etc. complete.
 Bath 2 1.2 2 4.800 Sq m
2 1.5 2 6.000 Sq m
W.C 2 1.2 2 4.800 Sq m
2 0.9 2 3.600 Sq m
19.200 Sq m
Contingency - 10 % 1.920 Sq m
21.120 Sq m

Providing and laying vitrified stone effect

finish tiles having size 590 to 605 mm x 590
to 605 mm of 8 to 10 mm thickness and
confirming to IS. 15622-2006 (Group Bla) of
approved make, shade and pattern for flooring
32 33.46 BDM 12
in required position laid on a bed of 1:4
cement mortar including required position laid
on a bed of 1:4 cement mortar including neat
cement float, filling joints, curing and cleaning
etc. complete
Flooring - 15 % 37.65 Sq m
Contingency - 10 % 3.765 Sq m
41.415 Sq m
Clean the surface to remove dirt, loose
particles. Examine the surface closely for any
cracks. Clean the cracks. Provide and fill a
pure acrylic, polymer modified ready to use
paste Polyfill AR of approved make &
approved by Engineer in charge having a
cream coloured viscous emulsion ready to use
acrylic polymeric non shrink crackfiller putty
with auto suction properties and requiring no
bonding agent, no curing and no requirement
for opening the existing cracks finishing with
subsequent filling as required. Provide and
apply three coats of 100% acrylic waterproof
heat insulating breathable decorative external
33 50.10 995 Sq m
coating Sunext 8 of approved make &
approved by Engineer in charge, in the desired
shade. Stir well and apply by brush for three
coats. Applying three coats at an interval of 4-
6 hours between each coat. High Performance
100% Acrylic, Waterproof, Anti-fungal, Anti-
carbonation, Heat Insulating External Paint
should have following minimum properties: 1.
Specific Gravity: 1.3 ± 0.1 at 25°C 2. pH: 7.0
to 10.00 3. Viscosity: 18 to 30 sec. at 25°C by
Ford Cup Number B-4 (Dilute 2 parts of
product with 1 part of water) 4. CO2 diffusion
resistance co- efficient (DIN EN 1062-6 (2002-
 Providing and applying required coats of a
water based Evercrete Deep Penetrating Sealer
(DPS) on cement concrete surface like roads,
beams, and columns, plastered walls,
basements, roofs, potable water tanks etc to
react with cement and to penetrate concrete
structure thereby making it resistant to
34 31.16 BDJ 995 Sq m
chemicals / chlorides water to make it dust
proof and to act as a water resistant at the
same time which Strengthens the treated
surface and reduce the curing period etc
complete. - Note -- for item Number 7 to 4
prior approval of Superintending Engineer
will be necessary

Providing and laying Cast in situ/Ready

Mixcement concrete in M20 of trap/
granite/quartzite/gneiss metal for steps
including steel centering, formwork,
laying/pumping, compacting, roughening them
if special finish is to be provided, finishing
uneven and honeycombed surface and curing
etc. complete. The Cement Mortar 1:3 plaster
35 24.06 BDE 2 is considered for rendering uneven and 181 Cu m
honeycombed surface, only. Newly laid
concrete shall be covered by gunny bag,
plastic, tarpaulin etc. (Wooden centering will
not be allowed.), with fully automatic micro
processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)