320D RR/320D L RR

Hydraulic Excavator
Introduction
The increasing need to work within space-restricted
areas has created a demand for larger excavators that
can also work within tighter quarters and provide
greater productivity. The 320D RR and 320D L RR
excavators have been designed to rotate with a
minimal amount of counterweight hanging over the
tracks, which allows them to work in tight, confined
areas.

Productivity and Versatiltiy

The Caterpillar® 320D RR and 320D L RR have been
designed for use in specific applications that require
high maneuverability in confined spaces. These
excavators still maintain the ability to accomplish
tasks in a variety of applications where space is not a
factor. Service and Maintenance
The Cat® 320D RR and 320D L RR were designed
Swing Radius with full consideration given to ground level
The Caterpillar 320D RR and 320D L RR has a tail maintenance. Fast, easy service has been designed in
swing radius of 2000 mm (6’7”) as compared to 2750 for increased productivity and reduced maintenance
mm (9’0”) for the standard Caterpillar 320D L. This costs.
reduction of tail swing may allow for swing operation
with greater confidence knowing that the tail of the • Extended service intervals
machine only has a minimal amount of overhang.
• Advanced filtration
Engine and Hydraulics • Convenient filter access
By combining excellent fuel consumption of the 3066
TA engine with selectable Economy Mode and high • Concentrated remote greasing block
performance hydraulics, these excavators offer high
power, reduced tail swing radius and control in the • User-friendly electronic diagnostics
toughest applications.

Operator Station
Provides maximum space, wider visibility and easy
access to switches. The Caterpillar monitor features a
full-color graphical display that allows the operator to
understand the machine information at a touch of a
button. The new cab design provides a comfortable
environment assuring high productivity during the
long work day.
320D RR/320D L RR Hydraulic Excavator
Specifications
Engine Hydraulic System
Engine Model Cat 3066TA Main Implement System - Maximum 205 L/min 54 gal/min
Flow (2x)
Net Flywheel Power 103 kW 138 hp
Max. pressure - Equipment 35 000 kPa 5076 psi
Net Power - ISO 9249 103 kW 138 hp
Max. pressure - Travel 35 000 kPa 5076 psi
Bore 102 mm 4.02 in
Max. pressure - Swing 25 000 kPa 3626 psi
Stroke 130 mm 5.12 in
Pilot System - Maximum flow 32.4 L/min 8.6 gal/min
Displacement 6.37 L 389 in3
Pilot System - Maximum pressure 3900 kPa 566 psi
• The 320D RR / 320D L RR meet EPA Tier 2 emission regulations.
Boom Cylinder - Bore 120 mm 4.7 in
Boom Cylinder - Stroke 1260 mm 50 in
Weights
Stick Cylinder - Bore 140 mm 5.5 in
Operating Weight - Std. Undercarriage22 800 kg 50,265 lb
Stick Cylinder - Stroke 1518 mm 60 in
Operating Weight - Long 24 000 kg 52,911 lb
Undercarriage B1 Family Bucket Cylinder - Bore 120 mm 4.7 in
Counterweight 6500 kg 14,330 lb B1 Family Bucket Cylinder - Stroke 1104 mm 43.5 in
• Reach Boom 5.7 m (18 ft 7 in), R2.9B1 m (9 ft 7 in) stick, and 0.8 m3
(1.05 yd3) bucket, 800 mm (32 in) Shoes Service Refill Capacities
• Reach Boom 5.7 m (18 ft 7 in), R2.9B1 m (9 ft 7 in) stick, and 0.8 m3 Fuel Tank Capacity 284 L 75 gal
(1.05 yd3) bucket, 600 mm (24 in) Shoes
Cooling System 25 L 6.6 gal
Track Engine Oil 30 L 8 gal
Standard w/Standard Undercarriage 600 mm 24 in Swing Drive 8L 2.1 gal
Standard w/Long Undercarriage 800 mm 32 in Final Drive (each) 10 L 2.6 gal
Hydraulic System (including tank) 240 L 63.4 gal
Swing Mechanism Hydraulic Tank 140 L 37 gal
Swing Speed 11.5 RPM 11.5 RPM • Hydraulic tank has standard hydraulic oil capacity.
Swing Torque 62 kN·m 45,729 lb ft

Drive
Maximum Drawbar Pull 206 kN 46,311 lb
Maximum Travel Speed 5.5 km/h 3.4 mph

2
320D RR/320D L RR
Dimensions
All dimensions are approximate.

2
3

1 9

10

6
7 4
8 5

Boom Options Reach Boom

5.7 m (18'7")
Stick Options R2.9B1 R2.5B1
(9'7") (8'2")
1 Shipping height 3030 mm 3050 mm
(9'11") (10'0")
2 Shipping length 8770 mm 8770 mm
(28'9") (28'9")
3 Tail swing radius 2000 mm 2000 mm
(6'7") (6'7")
Undercarriage Fixed Gauge Long Fixed Gauge
4 Length to center of rollers 3265 mm (10'9") 3650 mm (12'0")
5 Track length 4075 mm (13'4") 4455 mm (14'7")
6 Ground clearance 450 mm (1'6") 450 mm (1'6")
7 Track gauge 2200 mm (7'3") 2380 mm (7'10")
8 Track width *2800 mm (9'2") **3180 mm (10'5")
9 Cab height 2950 mm (9'8") 2950 mm (9'8")
10 Counterweight clearance 1000 mm (3'3") 1000 mm (3'3")

*** Track width shown is for 600 mm (24") track shoes.

*** This dimension is for 800 mm (32") track shoes. If 600 mm (24") shoes are adopted, track width will be 2980 mm (9'9").

3
320D RR/320D L RR
Reach Excavator Working Ranges
Reach (R) boom configuration

Feet Meters
35
10
30 9

8
25
7
20 6

5
15 3
4 4
10 3

2
5
1 5

0 0

1
2
5
2 R2.9B1
10 3 7 R2.5B1
1 6
4
15
5

20 6

7
25
8
11 10 9 8 7 6 5 4 3 2 1 0 1 Meters
35 30 25 20 15 10 5 0 Feet

Boom Options Reach Boom

5.7 m (18'7")
Stick Options R2.9B1 R2.5B1
(9'7") (8'2")
Bucket Options 0.90 M 0.90 M
(1.18 yd) (1.18 yd)
1 Maximum digging depth 6640 mm (21'9") 6220 mm (20'5")
2 Maximum reach at ground level 9780 mm (32'1") 9380 mm (30'9")
3 Maximum cutting height 9410 mm (30'10") 9210 mm (30'3")
4 Maximum loading height 6570 mm (21'7") 6370 mm (20'11")
5 Minimum loading height 2250 mm (7'5") 2670 mm (8'9")
6 Maximum depth cut for 2440 mm (8') level bottom 6470 mm (21'3") 6030 mm (19'9")
7 Maximum vertical wall digging depth 6050 mm (19'10") 5640 mm (18'6")
Bucket digging force (SAE) 131 kN (29,450 lb) 131 kN (29,450 lb)
(ISO) 149 kN (33,497 lb) 149 kN (33,497 lb)
Stick digging force (SAE) 105 kN (23,605 lb) 116 kN (26,078 lb)
(ISO) 109 kN (24,504 lb) 120 kN (26,977 lb)

4
320D RR/320D L RR
Major Component Weights

kg lb
Base machine with counterweight (without front linkage) STD undercarriage with 600 mm shoe 18 800 41,447
L undercarriage with 800 mm shoe 20 000 44,092
Two boom cylinders (each with lines) 172 379
Counterweight
Non-removal type 6500 14,330
Boom (includes lines, pins and stick cylinder)
Reach boom 5.7 m (18'5") 1640 3,616
Stick (includes lines, pins, bucket cylinder and linkage)
R2.9B1 (9'7") 1010 2,227
R2.5B1 (8'2") 1000 2,205
Undercarriage [includes carbody, swing bearing, STD undercarriage with 600 mm shoe 6630 14,617
track frame, rollers, idlers, steps, guards, final drive] L undercarriage with 800 mm shoe 7830 17,262

320D RR Bucket Specifications and Compatibility

Material Density of keeping SR=1.35
Capacity* Width Tip Weight Teeth Reach Boom
Radius (w/o tips) Stick
m3 yd3 mm in mm in kg lb Qty R2.9B1 R2.5B1
B1 Buckets
Excavation 0.8 1.00 972 38 1477 58.1 610 1,340 5 s s
0.9 1.20 1092 43 1477 58.1 647 1,430 5 n s
1.0 1.30 1150 45 1477 58.1 666 1,470 6 * n

320D L RR Bucket Specifications and Compatibility

Material Density of keeping SR=1.35
Capacity* Width Tip Weight Teeth Reach Boom
Radius (w/o tips) Stick
m3 yd3 mm in mm in kg lb Qty R2.9B1 R2.5B1
B1 Buckets
Excavation 0.8 1.00 972 38 1477 58.1 610 1,340 5 s s
0.9 1.20 1092 43 1477 58.1 647 1,430 5 s s
1.0 1.30 1150 45 1477 58.1 666 1,470 6 s s
Assumptions for maximum material density rating: s 2100 kg/m3 (3,500 lb/yd3) max material density
1. Front linkage fully extended at ground line n 1800 kg/m3 (3,000 lb/yd3) max material density
2. Bucket curled * 1500 kg/m3 (2,500 lb/yd3) max material density
3. 100% bucket fill factor
* Based on SAE J296, some calculations of capacity specs fall on borderlines. Rounding
may allow two buckets to have the same English rating, but different metric ratings.

5
320D RR/320D L RR
Reach Boom Lift Capacities
Load Point Load Radius Load Radius Load at
Height Over Front Over Side Maximum Reach

R2.9B1 STICK – 2900 mm (9'7") UNDERCARRIAGE – Standard BOOM – 5700 mm (18'5")

BUCKET – 0.8 m3 (1.0 yd3) SHOES – 600 mm (24") triple grouser BUCKET POSITION – Fully Curled

1.5 m (5.0 ft) 3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft)

m
ft

7.5 m kg *2150 *2150 7.75

25.0 ft lb *4,750 *4,750 25.10
6.0 m kg *3350 *3050 *2050 *2050 8.73
20.0 ft lb *4,500 *4,500 28.47
4.5 m kg *4700 4450 *4400 3000 *2050 *2050 9.30
15.0 ft lb *10,200 9,550 *9,650 6,400 *4,500 *4,500 30.44
3.0 m kg *11 100 *11 100 *7050 6650 *5550 4250 4550 2900 *2100 1900 9.56
10.0 ft lb *23,550 *23,550 *15,150 14,300 *12,000 9,050 9,700 6,200 *4,650 4,150 31.34
1.5 m kg *8850 6100 6250 4000 4400 2800 *2300 1850 9.53
5.0 ft lb *19,050 13,150 13,450 8,550 9,450 5,950 *5,000 4,050 31.28
Ground kg *6400 *6400 9550 5800 6050 3800 4300 2700 *2550 1950 9.22
Line lb *14,600 *14,600 20,500 12,400 13,000 8,150 9,250 5,750 *5,550 4,250 30.26
–1.5 m kg *5900 *5900 *9850 *9850 9400 5650 5950 3700 4250 2650 *3000 2150 8.60
–5.0 ft lb *13,100 *13,100 *22,350 *22,350 20,200 12,150 12,800 7,950 9,150 5,650 *6,550 4,800 28.17
–3.0 m kg *9850 *9850 *14 350 11 050 9450 5700 5950 3700 *3800 2700 7.58
–10.0 ft lb *22,050 *22,050 *31,100 23,650 20,250 12,200 12,800 7,950 *8,400 6,000 24.72
–4.5 m kg *11 900 11 400 *8350 5850 *4350 4100 5.93
–15.0 ft lb *25,500 24,450 *17,800 12,600 *9,600 9,150 19.24

* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.

R2.9B1 STICK – 2900 m (9'7") UNDERCARRIAGE – Long BOOM – 5700 mm (18'5")

BUCKET – 0.9 m3 (1.20 yd3) SHOES – 800 mm (32") triple grouser BUCKET POSITION – Fully Curled

1.5 m (5.0 ft) 3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft)

m
ft

7.5 m kg *2150 *2150 7.75

25.0 ft lb *4,700 *4,700 25.10
6.0 m kg *3350 *3350 *2000 *2000 8.75
20.0 ft lb *4,450 *4,450 28.47
4.5 m kg *4650 *4650 *4400 3350 *2000 *2000 9.30
15.0 ft lb *10,150 *10,150 *9,550 7,150 *4,400 *4,400 30.44
3.0 m kg *11 050 *11 050 *7050 *7050 *5500 4700 *4800 3250 *2100 *2100 9.56
10.0 ft lb *23,500 *23,500 *15,100 *15,100 *11,950 10,150 *10,400 6,950 *4,550 *4,550 31.34
1.5 m kg *8800 6900 *6450 4450 5250 3150 *2250 2100 9.53
5.0 ft lb *19,000 14,850 *13,900 9,600 11,250 6,700 *4,900 4,600 31.28
Ground kg *6350 *6350 *9950 6550 *7150 4250 5150 3050 *2500 2200 9.22
Line lb *14,550 *14,550 *21,500 14,050 *15,400 9,150 11,000 6,500 *5,500 4,800 30.26
–1.5 m kg *5850 *5850 *9800 *9800 *10 250 6400 7150 4150 5100 3000 *2950 2450 8.60
–5.0 ft lb *13,050 *13,050 *22,300 *22,300 *22,200 13,800 15,400 8,950 10,900 6,400 *6,500 5,400 28.17
–3.0 m kg *9800 *9800 *14 350 12 750 *9800 6450 *7150 4200 *3750 3050 7.58
–10.0 ft lb *22,000 *22,000 *31,050 27,300 *21,150 13,850 *15,400 9,000 *8,300 6,750 24.72
–4.5 m kg *11 850 *11 850 *8300 6650 *4300 *4300 5.93
–15.0 ft lb *25,450 *25,450 *17,750 14,250 *9,500 *9,500 19.24

* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

6
320D RR/320D L RR Hydraulic Excavator
Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.
Upper Structure Monitor
Electrical Economy mode
Alternator, 50A Full time clock
Light, storage box mounted (one) Language display - Full color and graphical display
Signaling/Warning horn Machine condition, error code and tool mode setting
Engine Start-up level check for hydraulic oil, engine oil and coolant
Cat 3066 TA Warning information, filter/fluid change information and
2300m altitude capability with no deration working hour
EU Stage II compliant Undercarriage
Air intake heater Grease lubricated GLT2, resin seal
Automatic engine speed control Idler and ceneter section track guiding
Radial seal air filter 800mm (36in) triple grouser track shoe (320D LRR)
Water separator in fuel line 600mm (24in) triple grouser track shoes (320DRR)
Waved fin radiator with space for cleaning
2 micron fuel filter
Automatic swing parking brake
Boom drift reducing valve
Boom lowering device for back-up
Caterpillar one key security system
Counterweight
Door locks and cap locks
Mirrors, rearview (frame-right, cab-left)
Product link ready
Regeneration circuit for boom and stick
Reverse swing damping valve
Stick drift reducing valve
Two speed travel
Operator Station
Cab
Adjustable armrest
Ashtray with lighter
Beverage holder
Bi-Level air conditioner (automatic) with defroster
Bolt-on FOGS Capability
Capability of installing two additional pedals
Coat hook
Front windshield glass split 70/30
Interior lighting
Literature holder
Mounting for two stereo speakers (two locations)
Neutral lever (lock out) for all controls
Openable front windshield with assist device
Openable skylight
Pillar mounted upper windshield wiper and washer
Pressurized cab (Positive filtered ventilation)
Radio mounting (DIN size)
Rear window, emergency exit
Removable lower windshield with in-cab storage bracket
Seat with integrated, adjustable console
Seat belt, retractable (two inch width)
Sliding upper door window
Storage compartment suitable for lunch box
Travel control pedals with removable hand levers
Utility space for magazine
Washable floor mat

7
320D RR/320D L RR Hydraulic Excavator
Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for details.
Front linakge Tool Control System
Bucket linkage, B1-family with lifting eye Configuration 1 (hammer 1), Foot Pedal Operated 1P,
Heavy-duty 5.7 m (18ft 9in) Reach Boom (with left side light) One-way Circuit
Heavy-duty 2.9B1 (9ft 6in) Stick for Heavy-duty Reach Configuration 2 (common), Foot Pedals Operated 1/2P,
Boom Common Circuit
Heavy-duty 2.5B1 (8ft 2in) Stick for Heavy-duty Reach Configuration 3 (hammer 2), Foot Pedal Operated 2P,
Boom One-way Circuit
Reach Boom 5.7 m (18ft 9in) with left side light Operator Station
R2.9B1 2900 mm (9ft 6in) stick Tempered Glass Windows
R2.5B1 2500 mm (8ft 2in) stick Polycarbonate Windows
Track PowerSupply, 12V-7A (2)
Standard Undercarriage Seat, High-back Air Suspension
700 mm (28in) Triple Grouser Shoes Seat, High-back Air Suspension with Heater
800 mm (32in) Triple Grouser Shoes Seat, High-back Mechanical Suspension
Guards Seat, Low-back Suspension without Headrest
FOGS, Bolt-on Headrest
Guard, Cab Front Sunscreen
Guard, Cab Top Windshield Wiper, Lower with Washer
Guard, Full Length for Long Undercarriage (two piece) Working Lights, Cab Mounted
Guard, Heavy-Duty Bottom (4mm) without Swivel Guard Rain Protector for Front Windshield
and Travel Motor Protection Sun Visor
Guard, Track End Guide for Standard Undercarriage AM/FM Radio
Guard, Vandalism Control Pattern Quick-Changer, Four-Way
Heavy-Duty Swivel Protection, (16mm) Swivel Guard only Cat MMS (anti-theft device)
Heavy-Duty Travel Motor Protection Lunch Box with Cover
Net for Front Guard (full net, one piece) Water Level Indicator for Water Separator
Net for Front Guard (half net, one piece) Other Optional Equipment
Swivel Protection, (6mm) Swivel Guard only Additional Gear Train for Auxiliary Pump
Auxiliary Hydraulics and Lines Air Pre-filter
Additional Circuit Cooling Package, High Ambient with VSF
Hammer Return Filter Circuit Cooling Package, Semi-High Ambient
Boom and Stick Lines Electric Refueling Pump with Auto Shut Off
Cat Quick Coupler Line (high and medium pressure capable) Fine Swing
Drain Line Starting Kit, Cold Weather, -32°C
High Pressure Line Travel Alarm
Medium Pressure Line
Quick Coupler
Quick Coupler for High Pressure

8
320D RR/320D L RR Hydraulic Excavator

Materials and specifications subject to change without notice.

Featured machines in photo may include additional equipment.

For more complete information on Cat products, dealer services,

and industry solutions, visit us on the web at www.cat.com.

© 2005 Caterpillar
All Rights Reserved.
CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are
trademarks of Caterpillar and may not be used without permission.
Product ID: 320D RR/320D L RR-APD

AEXJ0025 5 December 2005