TP300 series

72-cell multi-crystalline solar

photovoltaic modules

Manufactured in India Reliability under extreme

on leading edge module weather conditions, certified
production line using world to withstand snow loads of up
class processes to 5,400 Pa

Peace of mind guaranteed Reduced risk of failure –

by Tata Power Solar 25 year warranty claims of less than
linear module warranty 0.07% over two decades

Greater energy generated due TUV and UL certified Potential

to positive power tolerance of Induced Degradation free
up to 5W modules*

PRODUCT FEATURES
• 72 cell configuration with wattage ranging • Torsion and corrosion resistant with About Tata Power Solar
from 300 to 330 watts anodized aluminium frame
• High fill factor for improved energy • Unique back sheet design for high Tier 1** bankable module
conversion efficiency resistance to moisture ingress
manufacturer*** with 27 year history
• Cells sorted by power and current to • Enhanced reliability through use of
minimize mismatch losses in the field distinctive encapsulant and back sheet
Backed by $100Bn Tata Group;
• Electroluminescence tested for micro- • Ultra-soft interconnect with stress relief
cracks for enhanced reliability
eliminates need for expensive 3rd
• Highly reliable IP67 rated junction box • Optimized edge clearance for high quality party insurance
• MC4/MC4 compatible cable connectors rugged design
Over 1 GW of modules shipped
CERTIFICATIONS globally

Highest standards of quality and

management (ISO 9001, 14001 and
Certified to IEC 61730, IEC 61215, IEC 61701, IEC62716, UL 1703 and REACH standards OHSAS 18001)

WARRANTY
Product warranty: 10 year warranty on material and workmanship
Power warranty: 25 year linear power output warranty
* PID free certified modules available on order
** Rated tier-1 bankable by BNEF (Bloomberg New Energy Fund)
Warranties are subject to the Terms and Conditions as per the Tata Power Solar Standard Warranty Document. *** Bankability verified by third party auditors like Black & Veatch and
Certifications may vary by module BNEF
 TP300 series

Modules in the TP300 series TP300

` TP305 TP310 TP315 TP320 TP325 TP330

Electrical parameters at standard test conditions (STC)* Technical Drawing** Dimensions in mm

Nominal power output (W) 300 305 310 315 320 325 330
SIDE REAR VIEW
Power tolerance (W) 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 VIEW
951
Module efficiency (ŋ%) 15.4 15.7 15.8 16.2 16.4 16.7 17.2
Voltage at PMAX VMPP (V) 36.6 36.8 36.9 37.0 37.1 37.2 37.4
Current at PMAX IMPP (A) 8.20 8.29 8.41 8.51 8.62 8.72 8.83
1100mm 1100mm
Open-circuit voltage VOC (V) 44.8 44.8 44.9 44.8 45.0 45.0 45.1 CABLE (–) CABLE (+)

Short-circuit current ISC (A) 8.71 8.81 8.88 8.98 9.08 9.16 9.26

Electrical parameters at NOCT CM

CM

Power output PMAX (W) 216.0 219.6 223.2 226.8 230.4 234.0 237.0
1190 1955
Voltage at PMAX VMPP (V) 32.2 32.3 32.4 32.5 32.6 32.7 32.8 GROUNDING HOLE - 2 NOS
GROUNDING MARK
Current at PMAX IMPP (A) 6.71 6.81 6.89 6.98 7.07 7.15 7.24
Open-circuit voltage VOC (V) 39.4 39.4 39.5 39.5 39.6 39.6 39.6
Short-circuit current ISC (A) 7.24 7.27 7.34 7.38 7.44 7.48 7.53

Temperature coefficient characteristics

OBLONG HOLES [9mm X 14mm]
4 Nos
NOCT (ºC) 47 ± 2
Module efficiency (%/ºC) -0.06 ± 0.01 DRAIN POINTS IN ALL CORNERS

Temperature coefficient of PMAX (%/ºC) -0.41

Temperature coefficient of VOC (%/ºC) -0.32
992
Temperature coefficient of ISC (%/ºC) 0.058 38

IV curve at multiple temperatures

Operating conditions
10
Current (A)

Maximum system voltage (UL & IEC) (V) 1000 & 1000 9
8
7
Maximum series fuse rating (A) 20 6
5 t = 10ºC
Limiting reverse current (A) 20 4 t = 25ºC
3 t = 40ºC
Operating temperature range (ºC) –40 and +85 2 t = 55ºC
1
t = 70ºC
Voltage (V)
Maximum static load (snow or wind) 113 psf (5400 Pa) 0
0 10 20 30 40 50 

Module general characteristics IV curve at multiple irradiance

+
Module dimensions L x W x H (mm)*** 1955 x 992 x 38 10
Current (A)

9
1000W/m2
Module weight (approx) (kg [lbs]) 24 [52.91] 8
7
800W/m2
Number of cells & size 72 cells & 156mm/156.75 (4BB/5BB) 6
5 600W/m2
Frame material Anodized aluminium T6-6063 alloy 4

Glass 3.2mm ARC 3 400W/m2

2

Junction box IP67 rated, IEC 1000V + UL 1000V 1 200W/m2

0

Cable connector MC4/MC4 compatible (4mm2) 0 5 10 15 20 25 30 35 40 45 50

Voltage (V)

Packaging details * Irradiance of 1000W/m2, spectrum AM of 1.5 and cell

temperature of 25ºC
Best in class AAA solar simulator (IEC 60904-9) used,
Number of modules per pallet 27 electrical measurement tolerance ±3%
Number of pallets per 40ft container 22
** Tolerance for dimensions -3/+3mm
Box weight (kg) 630 Tolerance for cable length 0/+50mm
+
Frame type any of lock or screw and width could be 38 or
++
Box dimensions L x W x H (mm)**** 2010 x 1170 x 1185 40 mm
MOD-TP-300-4BB-122017-VER05

++
Box dimension are subject to change

Listed specifications are subject to change without notice.

Our vision is to be the most admired and responsible

To know more about our range of solar
solar power company enabling solar everywhere with an
solutions call Toll Free 1800 419 8777 or
international footprint, delivering sustainable value to all visit www.tatapowersolar.com
stakeholders.