SAFETY DATA SHEET

1. Identification
Product identifier WOOD AND WOOD PRODUCTS
Product list Engineered Lumber (I-joists, Laminated Veneer Lumber (LVL), Rim board):- Wood I Beam™ joists,
GP Lam® LVL, FiberStrong® rim board
--------------------------------------------- --------------------------------------------- ------------------------------
Lumber Products:- Solid sawn wood, Dimension Lumber, Lumber, Studs
-------------------------------------------- --------------------------------------------- ------------------------------
Plywood:- Plytanium® plywood, DryPly® plywood, Plytanium® siding, Ply-Bead® panels,
PlyFrame® panels, PlyForm panels
---------------------------------------------- ---------------------------------------------
------------------------------
Oriented Strand Board (OSB):- Blue Ribbon® OSB (Mill #451,500), Thermostat® radiant barrier
sheathing (Mill #500), FiberStrong® HD panels (Mill #451, 500), Camouflage panels featuring
Mossy Oak® brand (Mill #500), Realtree® camouflage panels (Mill #500)
---------------------------------------------- ---------------------------------------------
------------------------------
Engineered Boards:- Hardboard panels (Standard, Tempered, Perforated, Paneling), Decorative
wall coverings, UltraStrate® industrial panels, HeartWood® pen mats, HushBoard® sound
deadening panels, FiberBase HD Excel™, FiberBase HD™, FiberBase RD™, QuietBrace® structural
sheathing, Regular fiberboard sheathing, FiberPine™ industrial panels
Other means of identification
SDS number GP-31A
Recommended use Building Materials - Structural, Industrial or Decorative
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
Company name Georgia-Pacific Wood Products LLC
Address 133 Peachtree Street, NE
Atlanta, GA 30303
Telephone Technical Information: 800.284.5347
(M)SDS Request: 404.652.5119
e-mail MSDSREQ@GAPAC.COM
Emergency phone Chemtrec - Emergency: 800.424.9300
number

Importer/Supplier/
Distributor
Company name GP North Woods LP
Address 327022 Highway 11
Englehart, ON P0J 1H0
Telephone Technical Information: 705-544-2395
(M)SDS Request: 404.652.5119
e-mail MSDSREQ@GAPAC.com
Emergency phone Chemtrec - Emergency: 800.424.9300
number

2. Hazard(s) identification
Emergency overview This product is not hazardous in the form in which it is shipped by the manufacturer but may
become hazardous by downstream activities (e.g., grinding, sanding, cutting, pulverizing) that
reduce its particle size. Those hazards are described below.
Physical hazards Combustible dusts Category 1
Health hazards Eye irritation Category 2B
Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 1/8

 Sensitization, respiratory Category 1
Sensitization, skin Category 1
Carcinogenicity Category 1A
Specific target organ toxicity following single Category 3 respiratory tract irritation
exposure
Environmental hazards Not classified.
Label elements

Signal word Danger

Hazard statement May cause an allergic skin reaction. Causes eye irritation. May cause allergy or asthma symptoms
or breathing difficulties if inhaled. May cause respiratory irritation. May cause cancer. If small
particles of wood dust are generated during further processing, handling or by other means, may
form combustible dust concentrations in air.
Precautionary statement
Prevention Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Wear protective gloves/protective clothing/eye protection/face protection. Wear
respiratory protection. Avoid breathing dust/fume/gas/mist/vapours/spray. Wash thoroughly after
handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be
allowed out of the workplace. Prevent dust accumulation and airborne dispersion of dust to
minimize flash fire and explosion hazard. Keep away from heat, hot surfaces, sparks, open flames
and other ignition sources. No smoking.
Response IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF ON SKIN:
Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. Take off
contaminated clothing and wash it before reuse. IF INHALED: Remove person to fresh air and
keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON
CENTER/doctor. IF exposed or concerned: Get medical advice/attention. In case of fire: Use
appropriate media to extinguish.
Storage Store in a well-ventilated place. Store away from incompatible materials (see Section 10 of the
SDS).
Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.
Other hazards None known.
Supplemental information None.

3. Composition/information on ingredients
Mixtures
Chemical name Common name and synonyms CAS number %
WOOD/WOOD DUST Not assigned 60 - 100
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
Composition comments Some lumber products may be sprayed with sap stain control coatings. The lumber is air or kiln
dried. No chemical residue is left on the surface of the board. Wood products are bonded with
phenol, phenol resorcinol, melamine formaldehyde-based, or polyvinyl acetate resin. Some wood
products may be coated with finishes, sealants and or overlays.

4. First-aid measures
Inhalation Remove from area of exposure. If the affected person is not breathing, apply artificial respiration. If
persistent irritation, severe coughing or breathing difficulty occurs, seek medical attention.
Skin contact If irritation develops, wash with soap and water. If skin irritation or rash occurs: Get medical
advice/attention. Wash contaminated clothing before reuse.
Eye contact Do not rub eyes. Immediately flush eyes with plenty of water for at least 15 minutes. Rinse with
water. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention
immediately. Get medical attention if irritation develops and persists.
Ingestion If wood or wood dust is swallowed, get immediate medical attention or advice -- Do not induce
vomiting.
Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 2/8

Most important Irritation of eyes. Exposed individuals may experience eye tearing, redness, and discomfort. May
symptoms/effects, acute and cause an allergic skin reaction. Dermatitis. Rash. May cause respiratory irritation. Difficulty in
delayed breathing.
Indication of immediate Provide general supportive measures and treat symptomatically. Treat symptomatically. In case of
medical attention and special shortness of breath, give oxygen. Keep victim warm. Keep victim under observation. Symptoms
treatment needed may be delayed.
General information If you feel unwell, seek medical advice (show the label where possible). Ensure that medical
personnel are aware of the material(s) involved, and take precautions to protect themselves. Wash
contaminated clothing before reuse.

5. Fire-fighting measures
Suitable extinguishing media Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Apply extinguishing media carefully
to avoid creating airborne dust. Avoid high pressure media which could cause the formation of a
potentially explosible dust-air mixture.
Unsuitable extinguishing Heavy water (or jet) stream may cause dust to become airborne and create a flash fire hazard or
media an explosive atmosphere.
Specific hazards arising from Explosion hazard: Avoid generating dust; fine dust dispersed in air in sufficient concentrations and
the chemical in the presence of an ignition source is a potential dust explosion hazard. During fire, gases
hazardous to health may be formed.
Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for
firefighters
Fire fighting In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do
equipment/instructions so without risk.
Specific methods To avoid dust clouds, responders should use the extinguisher from as far away as possible and
apply the extinguishing agent as gently as possible. The main considerations with hose stream
operation are to avoid creating combustible dust clouds or introducing more air. In particular, the
use of solid streams and direct dust pile hits can disperse dust into the air creating a potential flash
fire hazard. The best way to apply water is in a medium to wide-pattern, as gently as possible.
Responders should use a low nozzle pressure and loft the stream onto the burning material from as
far away as the stream will reach.
General fire hazards May form combustible dust concentrations in air.

6. Accidental release measures

Personal precautions, Use only non-sparking tools. Dust deposits should not be allowed to accumulate on surfaces, as
protective equipment and these may form an explosive mixture if they are released into the atmosphere in sufficient
emergency procedures concentration. Wear appropriate protective equipment and clothing during clean-up. Ensure
adequate ventilation. For personal protection, see section 8 of the SDS.
Methods and materials for Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Take
containment and cleaning up precautionary measures against static discharge. Use only non-sparking tools. Avoid dispersal of
dust in the air (i.e., clearing dust surfaces with compressed air). Vacuum dust with dust ignition
proof vacuum or wet sweep small wood pieces and dust; place in appropriate container for
disposal. Gather larger pieces by an appropriate method. Reduce airborne dust by use of wet
methods (e.g. water mist) and prevent scattering by moistening with water. For waste disposal, see
section 13 of the SDS.
Environmental precautions Avoid discharge into drains, water courses or onto the ground.

7. Handling and storage

Precautions for safe handling Dust can form an explosive mixture in air. Provide appropriate exhaust ventilation at machinery and
at places where dust can be generated. Minimise dust generation and accumulation. Avoid
significant deposits of material, especially on horizontal surfaces, which may become airborne and
form combustible dust clouds and may contribute to secondary explosions. Routine housekeeping
should be instituted to ensure that dusts do not accumulate on surfaces. Dry powders can build
static electricity charges when subjected to the friction of transfer and mixing operations. Provide
adequate precautions, such as electrical grounding and bonding, or inert atmospheres. Keep away
from heat/sparks/open flames/hot surfaces. - No smoking. Avoid contact with eyes, skin, and
clothing. Avoid prolonged exposure. Wear appropriate personal protective equipment. Use personal
protective equipment as required. Ensure dust collection systems used for conveying combustible
wood dusts are protected with and equipped with fire and explosion prevention and protection
equipment. See NFPA 664 and NFPA 69 for further requirements, information and guidance.

Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 3/8

Conditions for safe storage, Store flat, supported and protected from direct contact with the ground. Store away from
including any incompatible materials (see Section 10 of the SDS). Store in a cool dry place.
incompatibilities

8. Exposure controls/personal protection

Occupational exposure limits
ACGIH
Components Type Value Form

WOOD/WOOD DUST TWA 1 mg/m3 Inhalable fraction.

Canada. Alberta OELs (Occupational Health & Safety Code, Schedule 1, Table 2)
Components Type Value Form

WOOD/WOOD DUST TWA 3 mg/m3 Respirable particles.

10 mg/m3 Total particulate.
Canada. British Columbia OELs. (Occupational Exposure Limits for Chemical Substances, Occupational Health and
Safety Regulation 296/97, as amended)
Components Type Value Form
WOOD/WOOD DUST TWA 3 mg/m3 Respirable fraction.
10 mg/m3 Total dust.
Canada. Ontario OELs. (Ministry of Labor - Control of Exposure to Biological or Chemical Agents)
Components Type Value Form

WOOD/WOOD DUST STEL 10 mg/m3 Dust.

TWA 3 mg/m3 Respirable fraction.
10 mg/m3 Inhalable fraction.
Canada. Quebec OELs. (Ministry of Labour - Regulation Respecting the Quality of the Work Environment)
Components Type Value Form

WOOD/WOOD DUST TWA 10 mg/m3 Total dust.

Biological limit values No biological exposure limits noted for the ingredient(s).
Appropriate engineering Due to the fire and explosive potential of dust when suspended in air, precautions should be taken
controls when material is used in any operation which may generate dust. Local exhaust, general dilution
ventilation in enclosed areas, and explosion proof equipment is recommended. Use wet methods, if
appropriate, to reduce airborne dust concentrations.
Individual protection measures, such as personal protective equipment
Eye/face protection Safety glasses or goggles are recommended when using this product.
Skin protection
Hand protection Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Other Impervious protective clothing and gloves recommended to prevent drying or irritation of skin.
Safety shower/eye wash fountain is recommended in the workplace area.
Respiratory protection When workers are facing concentrations above the exposure limit they must use appropriate
certified respirators.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene When using, do not eat, drink or smoke. Keep away from food and drink. Always observe good
considerations personal hygiene measures, such as washing after handling the material and before eating,
drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove
contaminants. Contaminated work clothing should not be allowed out of the workplace.

9. Physical and chemical properties

Appearance Rigid boards or panels
Physical state Solid.
Form Solid wood
Colour Various
Odour Not available.
Odour threshold Not available.
pH Not applicable

Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 4/8

Melting point/freezing point Not applicable
Initial boiling point and Not applicable
boiling range
Flash point Not applicable
Evaporation rate Not applicable
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower > 40 g/m3 for wood dust. Note: The LEL is equivalent to the Minimum Explosive Concentration
(%) (MEC) for the combustible dust. The MEC will vary with particle size of the wood dust. Recommend
MEC testing for specific wood dust particle sizes generated or handled.
Flammability limit - Not available
upper (%)
Explosive limit - lower Not available.
(%)
Explosive limit – upper Not available.
(%)

Vapour pressure Not applicable

Vapour density Not applicable
Relative density Variable
Solubility(ies)
Solubility (water) Insoluble
Partition coefficient Not applicable
(n-octanol/water)
Auto-ignition temperature 204.4 - 260 °C (399.92 - 500 °F) for wood
Decomposition temperature Not available
Viscosity Not available.
Other information
Bulk density Not applicable
Explosive properties Not explosive.
Flash point class Combustible
Oxidising properties Not oxidising.

10. Stability and reactivity

Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability Material is stable under normal conditions.
Possibility of hazardous No dangerous reaction known under conditions of normal use.
reactions
Conditions to avoid Dust accumulation, dispersion of dust in air, high temperatures, open flame, sparks, or other
sources of ignition.
Incompatible materials Strong acids, alkalies, oxidizing agents and drying oils.
Hazardous decomposition Thermal decomposition may emit irritating fumes or gases of carbon monoxide, carbon dioxide,
products aldehydes, or organic acids.

11. Toxicological information

Information on likely routes of exposure
Inhalation May cause irritation to the respiratory system. May cause allergy or asthma symptoms or breathing
difficulties if inhaled. Prolonged inhalation may be harmful.
Skin contact May cause an allergic skin reaction.
Eye contact Causes eye irritation.
Ingestion Not applicable under normal conditions of use. May result in obstruction or temporary irritation of
the digestive tract.

Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 5/8

Symptoms related to the Irritation of eyes. Exposed individuals may experience eye tearing, redness, and discomfort. Dusts
physical, chemical and may irritate the respiratory tract, skin and eyes. Difficulty in breathing. May cause an allergic skin
toxicological characteristics reaction. Dermatitis. Rash.
Information on toxicological effects
Acute toxicity Not available.
Skin corrosion/irritation Prolonged skin contact may cause temporary irritation.
Serious eye damage/eye Causes eye irritation.
irritation
Respiratory or skin sensitisation
Canada - Saskatchewan OELs Hazard Data: Sensitiser
WOOD/WOOD DUST (CAS Not assigned) Sensitiser.
Respiratory sensitisation May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin sensitisation May cause an allergic skin reaction.
Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
Carcinogenicity Wood dust generated from sawing, sanding or machining this product may cause nasal dryness,
irritation, coughing and sinusitis. The International Agency for Research on Cancer (IARC), and
National Toxicology Program (NTP) classifies wood dust as a carcinogen. This classification is
based on the increased occurrence of adenocarcinomas of the nasal cavities and paranasal sinuses
associated with exposure to wood dust. The evaluation noted insufficient evidence to associate
cancers of the oropharynx, hypopharynx, lung, lymphatic and hematopoietic systems, stomach,
colon, or rectum with exposure to wood dust.
IARC Monographs. Overall Evaluation of Carcinogenicity
WOOD/WOOD DUST (CAS Not assigned) 1 Carcinogenic to humans.
US. National Toxicology Program (NTP) Report on Carcinogens
WOOD/WOOD DUST (CAS Not assigned) Known To Be Human Carcinogen.
Reproductive toxicity This product is not expected to cause reproductive or developmental effects.
Specific target organ toxicity May cause respiratory irritation.
- single exposure
Specific target organ toxicity Not classified.
- repeated exposure
Aspiration hazard Not an aspiration hazard.
Chronic effects Prolonged inhalation may be harmful. Prolonged exposure may cause chronic effects.

12. Ecological information

Ecotoxicity The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Persistence and degradability No data is available on the degradability of this product.
Bioaccumulative potential No data available.
Mobility in soil No data available.
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.

13. Disposal considerations

Disposal instructions Dispose of contents/container in accordance with local/regional/national/international regulations.
Local disposal regulations Dispose in accordance with all applicable regulations.
Hazardous waste code The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Waste from residues / Dispose of in accordance with local regulations.
unused products
Contaminated packaging Empty packaging/container can be disposed in accordance with all applicable regulations.

14. Transport information

TDG
Not regulated as dangerous goods.

Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 6/8

IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code

15. Regulatory information

Canadian regulations
Controlled Drugs and Substances Act
Not regulated.
Export Control List (CEPA 1999, Schedule 3)
Not listed.
Greenhouse Gases
Not listed.
Precursor Control Regulations
Not regulated.
International regulations
Stockholm Convention
Not applicable.
Rotterdam Convention
Not applicable.
Kyoto protocol
Not applicable.
Montreal Protocol
Not applicable.
Basel Convention
Not applicable.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
Canada Domestic Substances List (DSL) Yes
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).

16. Other information

Issue date 05-29-2017
Version No. 01
Disclaimer This SDS is intended to quickly provide useful information to the user(s) of this material or product.
It is not intended to serve as a comprehensive discussion of all possible risks or hazards, and it
assumes a reasonable use of the product. The information contained in this SDS is believed to be
accurate as of the date of preparation of this SDS and has been compiled from sources believed to
be reliable. It is offered for your consideration, investigation and verification. The user or handler
(or their employer) should consider the specific conditions in which this material will be used,
handled, or stored and determine what specific safety or other precautions are required. Employers
should ensure that their employees, agents, contractors, and customers who will use the product
receive adequate warnings and safe handling procedures, including a current SDS. Product users
or handlers (or their employer) who are unsure of what specific precautions are required should
consult their employer, product supplier, or safety or health professionals before handling or
working with this product. Please notify us immediately if you believe this SDS or other safety and
health information about this product is inaccurate or incomplete.

Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 7/8

Revision information Product and Company Identification: Synonyms
Hazards Identification: US Hazardous
Composition / Information on Ingredients: Ingredients
Physical & Chemical Properties: Multiple Properties
Regulatory Information: United States
Material Attributes & Uses; Experimental Data: Physical States
HazReg Data: North America
GHS: Classification

Material name: WOOD AND WOOD PRODUCTS SDS CANADA

4424 Version #: 01 Issue date: 05-29-2017 8/8

WOOD AND WOOD PRODUCTS / BOIS ET PRODUITS DU BOIS
EN 
Danger
Hazard statement
May cause an allergic skin reaction. Causes eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause
respiratory irritation. May cause cancer. If small particles of wood dust are generated during further processing, handling or by other means, may form
combustible dust concentrations in air.

Precautionary statement
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/protective
clothing/eye protection/face protection. Wear respiratory protection. Avoid breathing dust/fume/gas/mist/vapours/spray. Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Prevent dust accumulation and
airborne dispersion of dust to minimize flash fire and explosion hazard. Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If
eye irritation persists: Get medical advice/attention. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing
respiratory symptoms: Call a POISON CENTER/doctor. IF exposed or concerned: Get medical advice/attention. In case of fire: Use appropriate media to
extinguish. Store in a well-ventilated place. Store away from incompatible materials (see Section 10 of the SDS). Dispose of contents/container in
accordance with local/regional/national/international regulations.

FR-CA 
Danger
Mention de danger
Peut provoquer une allergie cutanée. Provoque une irritation des yeux Peut provoquer des symptômes allergiques ou d’asthme ou des difficultés 
respiratoires par inhalation. Peut irriter les voies respiratoires. Peut provoquer le cancer. Si des petites particules de poussière de bois sont émises par 
des activités de transformation, de manipulation ou par d’autres moyens, elles peuvent former des concentrations de poussières combustibles dans l’air. 

Conseil de prudence
Se procurer les instructions avant utilisation. Ne pas manipuler avant d’avoir lu et compris toutes les précautions de sécurité. Porter des gants/vêtements 
de protection/ équipement de protection des yeux/du visage. Porter une protection respiratoire. Éviter de respirer les 
poussières/fumées/gaz/brouillards/vapeurs/aérosols. Se laver soigneusement après manipulation. Utiliser seulement en plein air ou dans un endroit bien 
ventilé. Les vêtements de travail contaminés ne devraient pas sortir du lieu de travail. Éviter l’empoussièrement et la dispersion des particules de 
poussière dans l’air afin de minimiser les risques d’inflammation instantanée et d’explosion. Tenir à l’écart de la chaleur, des surfaces chaudes, des 
étincelles, des flammes nues et de toute autre source d’ignition. Ne pas fumer. EN CAS DE CONTACT AVEC LES YEUX: Rincer avec précaution à l’eau 
pendant plusieurs minutes. Enlever les lentilles de contact si la victime en porte et si elles peuvent être facilement enlevées. Continuer à rincer. Si 
l’irritation des yeux persiste : Demander un avis médical/Consulter un médecin. EN CAS DE CONTACT AVEC LA PEAU: Laver abondamment à l'eau. En 
cas d’irritation ou d’éruption cutanée : Obtenir une consultation médicale ou des soins médicaux. Enlever les vêtements contaminés et les laver avant 
réutilisation. EN CAS D'INHALATION: Transporter la personne à l'extérieur et la maintenir dans une position où elle peut confortablement respirer. En cas 
de symptômes respiratoires: Appeler un CENTRE ANTIPOISON/un médecin. EN CAS d’exposition prouvée ou suspectée : Demander un avis 
médical/Consulter un médecin. En cas d’incendie : utiliser un agent d’extinction approprié. Stocker dans un endroit bien ventilé. Conserver à l'écart de 
matières incompatibles (voir rubrique 10). Éliminer le contenu/récipient conformément à la réglementation locale/régionale/nationale/internationale. 

Product list / Liste de produits:

Engineered Lumber (I-joists, Laminated Veneer Lumber (LVL), Rim board):- Wood I Beam™ joists, GP Lam® LVL, FiberStrong® rim
Manufacturer: board
Company name: Georgia-Pacific Wood Products LLC
Address: 133 Peachtree Street, NE Lumber Products:- Solid sawn wood, Dimension Lumber, Lumber, Studs
Atlanta, GA 30303
Telephone: Technical Information: 800.284.5347
(M)SDS Request: 404.652.5119
Plywood:- Plytanium® plywood, DryPly® plywood, Plytanium® siding, Ply-Bead® panels, PlyFrame® panels, PlyForm panels
e-mail: MSDSREQ@GAPAC.COM
Emergency phone number: Chemtrec - Emergency: Oriented Strand Board (OSB):- Blue Ribbon® OSB (Mill #451,500), Thermostat® radiant barrier sheathing (Mill #500), FiberStrong® HD
800.424.9300
panels (Mill #451, 500), Camouflage panels featuring Mossy Oak® brand (Mill #500), Realtree® camouflage panels (Mill #500)
Importer/Supplier/ Distributor:
Company name: GP North Woods LP Engineered Boards:- Hardboard panels (Standard, Tempered, Perforated, Paneling), Decorative wall coverings, UltraStrate® industrial
Address: 327022 Highway 11
Englehart, ON P0J 1H0 panels, HeartWood® pen mats, HushBoard® sound deadening panels, FiberBase HD Excel™, FiberBase HD™, FiberBase RD™, QuietBrace®
Telephone: Technical Information: 705-544-2395
(M)SDS Request: 404.652.5119
e-mail: MSDSREQ@GAPAC.com structural sheathing, Regular fiberboard sheathing, FiberPine™ industrial panels
Emergency phone number: Chemtrec - Emergency:
Canada