Scribd Logo
Upload

Welcome to Scribd!

  • 133 views

    Gendex VisualiX HDI Installation PDF

    Uploaded by

    هشام موسى
    This document provides installation instructions for a Gendex GX-S/VisualiX HDI Sensor in 3 steps: 1) Install the EagleSoft Digital Integration CD. 2) Under Gendex, click GX-S Sensor and download the driver. 3) Plug in the sensor, restart the computer, and click Finish to complete the installation. It then provides detailed steps for installing the driver for the sensor for different versions of Windows.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gendex VisualiX HDI Installation PDF

    Uploaded by

    هشام موسى
    133 views14 pages
    This document provides installation instructions for a Gendex GX-S/VisualiX HDI Sensor in 3 steps: 1) Install the EagleSoft Digital Integration CD. 2) Under Gendex, click GX-S Sensor and download the driver. 3) Plug in the sensor, restart the computer, and click Finish to complete the installation. It then provides detailed steps for installing the driver for the sensor for different versions of Windows.

    Original Title

    Gendex_VisualiX_HDI_Installation.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides installation instructions for a Gendex GX-S/VisualiX HDI Sensor in 3 steps: 1) Install the EagleSoft Digital Integration CD. 2) Under Gendex, click GX-S Sensor and download the driver. 3) Plug in the sensor, restart the computer, and click Finish to complete the installation. It then provides detailed steps for installing the driver for the sensor for different versions of Windows.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    133 views14 pages

    Gendex VisualiX HDI Installation PDF

    Uploaded by

    هشام موسى
    This document provides installation instructions for a Gendex GX-S/VisualiX HDI Sensor in 3 steps: 1) Install the EagleSoft Digital Integration CD. 2) Under Gendex, click GX-S Sensor and download the driver. 3) Plug in the sensor, restart the computer, and click Finish to complete the installation. It then provides detailed steps for installing the driver for the sensor for different versions of Windows.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 14

    GX-S/Visualix HDI Sensor Installation

    Instructions
    Version: 11.0
    Date Created: 8/18/04 Last Modified: 2/12/05
    Filename: Gendex VisualiX HDI Installation.doc

    Required materials: Required EagleSoft modules: Install on the following computers:


    • EagleSoft Digital Integration • Integrated Digital X-Ray • Any operatory workstation using
    CD the Gendex GX-S/VisualiX HDI
    • Gendex GX-S/VisualiX HDI Sensor
    sensor
    • GX-S/VisualiX HDI IME box
    • USB Cable
    • Power supply

    1. Install the EagleSoft Digital Integration CD

    2. Under Gendex, click GX-S Sensor

    Page 1 of 14
    3. Click Next and the download will begin

    4. Answer Yes

    5. Plug in the sensor, answer Yes to restart, and click on Finish to reboot the computer

    Page 2 of 14
    WINDOWS 98 ADD NEW HARDWARE INSTRUCTIONS STEPS 6-20:
    6. The Add New Hardware screen should come up on the reboot

    7. Click Next

    8. Click Next

    Page 3 of 14
    9. Click No, I want to select the hardware from a list and then click Next

    10. Choose Universal Serial Bus controllers and click Next

    11. Click Have Disk

    12. Click Browse

    Page 4 of 14
    13. On the right hand side, double click on Program Files\Eaglesoft\Shared Files
    14. The file vxusbdrv.inf should come up on the left & be highlighted. Click OK

    15. Click OK

    16. Choose VxUsbDrv.Sys IME control unit for CCD sensor and click Next

    Page 5 of 14
    17. Click Next

    18. Click Finish


    19. To verify installation, go to Start\Settings\Control Panel and double click on System

    Page 6 of 14
    20. Under the Device Manager tab, click on the plus (+) sign next to Universal Serial Bus controllers and
    VxUsbDrv.Sys IME control unit should be listed

    WINDOWS 2000 ADD NEW HARDWARE INSTRUCTIONS STEPS 21-36:


    21. The Found New Hardware screen should come up on the reboot

    22. Click Next

    23. Leave the radio button at Add/Troubleshoot a device and click Next

    Page 7 of 14
    24. After searching for the device, the following screen should appear

    25. Highlight USB Device and click Next

    26. Click Finish and it will take you into the Upgrade Device Driver Wizard
    Page 8 of 14
    27. Click Next

    28. Leave the radio button at Search for a suitable driver and click Next

    Page 9 of 14
    29. Check Specify a location and click Next

    30. Click on Browse and browse to EagleSoft\Shared Files

    31. Check Install one of the other drivers and click Next

    32. Highlight VixUsbDrv.Sys control unit for CCD sensor and click Next

    Page 10 of 14
    33. Click Finish
    34. To verify installation, go to Start\Settings\Control Panel and double click on System
    35. Under the Hardware tab click on the Device Manager button

    36. Under the Device Manager tab, click on the plus (+) sign next to Universal Serial Bus controllers and
    VxUsbDrv.Sys IME control unit should be listed

    Page 11 of 14
    WINDOWS XP ADD NEW HARDWARE INSTRUCTIONS STEPS 37-46:
    37. The Add New Hardware screen should come up on the reboot

    38. Choose the radio button for Install from a list or specific location and click Next

    39. Check the box for Include this location in the search and click Browse to browse to EagleSoft\Shared
    Files
    40. Click Next

    Page 12 of 14
    41. The above warning may appear. If so, click Continue Anyway

    42. The wizard will setup a system restore point and then install the new driver

    43. Click Finish


    44. To verify installation, go to Start\Settings\Control Panel and double click on System
    Page 13 of 14
    45. Under the Hardware tab click on the Device Manager button

    46. Under the Device Manager tab, click on the plus (+) sign next to Universal Serial Bus controllers and
    VxUsbDrv.Sys IME control unit should be listed

    Page 14 of 14

    You might also like