H I G H P E R F O R M A N C E

A C C E S S O R I E S

Available to purchase after receiving your order confirmation email.

PIPE ADAPTER MOUNT

Designed to attach to any pole with a max

diameter of 2.5” (64 mm). Slide adapter over
3.8 cm
the top of the existing pole, fasten provided (1.49“)
screws, and drop Starlink in.

Tools Needed:
None

Package Dimensions: 13 cm
(5.12”)
21 x 14 x 8.7 cm / 8.3” x 5.5” x 3.4”

Package Weight:
0.6 kg / 1.35 lbs

Compatibility:
Standard Starlink
High Performance Starlink 8 cm
(3.15”)
SHORT WALL MOUNT

Designed for installation on an

exterior wall, near the top of the
gable. Drilling required.

15.3 cm
Tools Needed: (6.02”)
Drill, Stud / Electrical Finder, Socket Wrench, Level,
5/32” (4 mm) Drill Bit, 0.5” x 2.5” (12.5 mm x 63.5 mm)
Socket, Pencil

Package Dimensions:
21 x 14 x 8.7 cm / 8.3” x 5.5” x 3.4”

Package Weight:
0.6 kg / 1.4 lbs 5.1 cm 7 cm
(2”) (2.77”)
Compatibility:
Standard Starlink
High Performance Starlink
LONG WALL MOUNT

Designed for installation on an

exterior wall near the top of the
gable; extra length provides
clearance of overhang when 12.3 cm
(4.84”)
needed. Drilling required.

Tools Needed:
Drill, Stud / Electrical Finder, Socket Wrench, Level,
5/32” (4 mm) Drill Bit, 0.5” x 2.5” (12.5 mm x 63.5 mm)
Socket, Pencil

Package Dimensions: 11.3 cm

(4.44”)
48.5 x 14 x 11.9 cm / 19.1” x 5.5” x 4.7”

Package Weight:
0.6 kg / 1.4 lbs
42.7 cm
Compatibility: (16.8”)
Standard Starlink
High Performance Starlink
GROUND POLE MOUNT

Designed for in-ground installation

when roof or wall mounting is not
possible; requires digging.

Tools Needed:
Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves,
Concrete Mix, and Water

Package Dimensions:
45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cm

Package Weight: 9.43 lbs / 4.27 kg

Compatibility: Rectangular Starlink

112.9 cm
(44.45 in)
PIVOT MOUNT

Designed for installation on shingled

roofs, recommend installing closer to
edge for cable routing. Not recommended
for tile, slate, and clay roofing. 110mm
(4.3 in)

For best results, Starlink should be

installed as close to vertical as possible.

Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench
156mm
Package Dimensions: (6.14 in)
9.7” x 5.5” x 3.1” / 24.7 x 14 x 7.9 cm

Package Weight: 2.21 lbs / 1.0 kg

Compatibility: Rectangular Starlink

220mm
(8.66 in)
FLASHING MOUNT

Designed for installation on shingled

roofs, recommend installing closer to
edge for cable routing. Not recommended
for tile, slate, and clay roofing.
381mm
(15 in)
For best results, Starlink should be
installed as close to vertical as possible.

Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench

Package Dimensions:
9.7” x 5.5” x 3.1” / 24.7 x 14 x 7.9 cm 66.3mm
(2.61 in)
Package Weight: 2.21 lbs / 1.0 kg

Compatibility: Rectangular Starlink

381 mm
(15 in)
RIDGELINE MOUNT

Designed for most rooftops

(roof ridgelines) and any flat
surface, no drilling required.
0 - 180°
Ballast weight included with
order and shipped separately.

Tools Needed:
None

Package Dimensions:
Mount Box: 74 x 61.4 x 9.5 cm/ 29” x 24” x 3.7” 573 mm
Ballast Box: 42.4 x 12.4 x 18.9 cm/ 16.7” x 4.9” x 7.4” (22.5 in)

Package Weight:
Mount Box: 5.3 kg/11.7 lbs.
Ballast Box: 25.3 kg/ 55.8 lbs.

Compatibility:
Standard Starlink
High Performance Starlink
676 mm
(26.6in)
HIGH PERFORMANCE CABLES

30 m (98 ft) Router Cable is designed to replace

the cable from the Starlink Kit when additional
length is needed between the Power Supply and
the Starlink Router.

Package Dimensions: 30 m
30 x 27 x 6.7 cm / 11.8” x 10.6” x 2.6” (98 ft)

Package Weight:
1.9 kg / 4.19 lbs

Compatibility:
High Performance Starlink
Flat High Performance Starlink

30 m (98 ft) Ethernet Cable is designed to

replace the cable from the Starlink Kit when
additional length is needed between the Power
Supply and the RJ45 connector (for third party
routers or devices).

Package Dimensions: 30 m
30 x 27 x 6.7 cm / 11.8” x 10.6” x 2.6” (98 ft)

Package Weight:
1.9 kg / 4.19 lbs

Compatibility:
High Performance Starlink
Flat High Performance Starlink
HIGH PERFORMANCE CABLES (CONT.)

25 m (82 ft) Starlink Cable is designed to replace

the cable between the High Performance Starlink
and the Power Supply in case of damage.

Package Dimensions: 25 m
22 x 51.6 x 6.4 cm / 8.7” x 20.3” x 2.5” (82 ft)

Package Weight:
2.9 kg / 6.39 lbs

Compatibility:
High Performance Starlink

8 m (26.2 ft) Starlink Cable is designed to replace

the cable between the High Performance Starlink
and the Power Supply in case of damage.

Package Dimensions: 8m
(26 ft)
22 x 51.6 x 6.4 cm / 8.7” x 20.3” x 2.5”

Package Weight:
0.9 kg / 2.0 lbs

Compatibility:
High Performance Starlink
MESH WIFI ROUTER

Starlink Mesh WiFi Routers wirelessly

extend your WiFi network throughout
your home to provide a more reliable
connection and faster speeds to areas
where extra coverage may be needed.

*Requires Starlink App

254 mm
(10”)

Package Dimensions:
22.4 x 28.6 x 10 cm / 8.8” x 11.3” x 4”

Package Weight:
1.72 kg / 3.75 lbs

Compatibility:
Standard Starlink 180 mm 65 mm
(7.08”) (2.55”)
High Performance Starlink
Flat High Performance Starlink
ETHERNET ADAPTER

Designed to connect a device directly to

the Starlink Router for a wired connection.
Supports up to 1 Gbps speeds.

Package Dimensions:
16.5 x 11.4 x 3.6 cm / 6.5” x 4.5” x 1.5”

Package Weight:
0.15 kg / 0.33 lbs

Compatibility:
Standard Starlink

0.92m
(3 ft)
CABLE ROUTING KIT

Designed for drilling through most walls.

Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior
internet cable routing experience and installation; must be comfortable drilling through walls.
Kit includes a spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed:
Drill, Stud / Electrical Finder

Package Dimensions:
34.9 x 13.3 x 4.4 cm / 3.75” x 5.25” x 1.75”

Package Weight:
0.38 kg / 0.83 lbs

Compatibility:
Standard Starlink
High Performance Starlink
Flat High Performance Starlink
MASONRY ROUTING KIT

Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS)

walls. Best for customers with prior internet cable routing experience and installation;
must be comfortable drilling through walls. Kit includes a spade bit, drill bit, cable routing
tool, silicone sealant, grommets, and wall clips. 

Tools Needed:
Hammer, Hammer Drill, Phillips Head Drill Bit,
Stud / Electrical Finder, Goggles, Gloves, and Mask

Package Dimensions:
35.2 x 16.5 x 4.4 cm / 13.875” x 6.5” x 1.75”

Package Weight:
1.0 kg / 2.1 lbs

Compatibility:
Standard Starlink
High Performance Starlink
Flat High Performance Starlink
THANK YOU