Mammoth Gold Service Manual Rev6
Mammoth Gold Service Manual Rev6
Mammoth Gold Service Manual Rev6
Proprietary
Connection Diagram
The following connection diagram is valid for 36x2 pins harnessing to fit an 8-liner cabinet.
COMPONENT SIDE SOLDER SIDE
1
SPEAKER RIGHT (6W) 2 SPEAKER GND
SPEAKER LEFT (6W) 3 SPEAKER GND
4
5
6
BUTTON COLLECT 7
8
BUTTON MAXBET 9
BUTTON HELP 10
BUTTON SPIN/TAKE 11
BUTTON BET PER LINE 12 PULSE COIN-IN ENABLE (output)
BUTTON DOUBLE/PREVIEW 13
14
15
BUTTON SELECT LINES 16
DOOR SWITCH 17
PULSE COIN-IN SIGNAL 18
19
SETUP MENU KEYLOCK 20
21
GND 22
COIN IN HARD METER (METER3) 23
TOTAL IN HARD METER (METER1) 24
25
26 LAMP COLLECT
PULSE PAY-OUT (output) 27
TOTAL OUT HARD METER (METER2) 28
LAMP MAXBET 29
LAMP HELP 30
LAMP SPIN / TAKE 31
LAMP BET PER LINE 32
LAMP DOUBLE/PREVIEW 33
LAMP SELECT LINES 34
GND 35 GND
GND 36 GND
Gaming Board
Daily statistics
This screen displays periodical machine statistics. The information might be used for
managing shifts.
Press MAXBET button for about 5 seconds to clear daily statistics (will be logged to
machine event list). Clearing daily statistics does not affect to the overall machine statistics,
available from the ACCOUNTING screen.
Press DOUBLE button to print out daily statistics. Printer must be configured in order to
print daily statistics ticket.
Game History
This screen displays at most last ten (10) played games if available.
The information can't be cleared unless you choose INIT MACHINE to reset it to the
factory defaults.
Handpay
Manual payin and payout is available from the KEY-IN and KEY-OUT menu screens.
Both should be enabled in the machine settings.
KEY-OUT screen displays paid amount once you press DOUBLE button to payout.
Reboot Machine
You should use safe machine reboot rather than disconnecting the power supply.
Choose REBOOT MACHINE menu entry and press DOUBLE button for about 5
seconds to safely reboot the machine.
Unsafely powering the machine off might lead to malfunctions
The Administrator Menu might be protected by password. This menu can not be
accessed until you payout credits. Both Credits and Winnings must be zero in order to access
this menu.
Accounting Screen
This screen displays overall machine statistics, including some game play data.
Press MAXBET button for about 5 seconds to clear accounting. Will clear daily
statistics as well. The event will be logged to machine event list.
Press DOUBLE button to print out audit ticket. Printer must be configured in order to
print accounting ticket.
Settings
The SETTINGS screen contains the following items:
1. MACHINE SETTINGS: see below
2. GAME SETTINGS: see below
3. JACKPOT SETTINGS: see below
4. PRINTER SETTINGS: setup ticket for serial printer
5. SETUP CLOCK: set the system time
6. CHANGE PASSWORD: setup the password to access Administrator Menu
7. EXIT: go back to previous menu
All the changes to the settings do not require reboot. However, you have to exit from the
settings screen back to the prior menu page in order to save the changes.
All settings are in credits. The Jackpot is triggered by a combination of 4x or 5x Deer symbols
in a row. If the current jackpot amount is less than natural symbol prize, then a regular symbol
prize is paid instead.
When the Credit Limit is exceeded, the machine will display a message and lock up:
Player must cash out some credits in order to continue playing the game.
Printer Settings
This screen contains printer ticket template configuration.
You may either use touch screen or hardware buttons to configure the ticket template
values. All the values are only needed to be printed on a ticket. They do not affect to the
machine.
Press DOUBLE button to move the cursor across the field. It cycles to the end of line
as soon as goes beyond the first char.
Change Password
This screen contains the password settings. Default password is emptied. You may
set the password up to 8 digits containing the numbers 1, 2 or 3. Once the password is set, it
will be asked every time you want to access the Administrator Menu.
Use touch screen or hardware buttons to enter the password when prompted.
Init Machine
This screen contains the Machine Initialization action. This is a complete machine
reseting to the default factory state. All the game data, statistics, settings and event logs are
cleared, except “Init Machine History” logs. The machine will reboot as soon as initialization is
complete.
Press DOUBLE button for about 5 seconds to reset the machine settings to factory defaults.
Event List
This screen contains the list of last available 50 event logs:
1. PAYIN EVENT LIST: all the pay-in events, such as Bill In and Key In
2. PAYOUT EVENT LIST: all the pay-out events, such as Key Out, Coin Out, Ticket Out
3. GAME EVENT LIST: game events, such as Big Win – a single big win event; Credit
Limit, Taxation report
4. MACHINE EVENTS LIST: such as Power On/Off, Door Open/Close, Battery Low,
Bill Acceptor Error
5. MACHINE INIT HISTORY: machine initialization logs
6. SETTINGS CHANGE HISTORY: machine and game settings changed logs
7. SETUP ACCESS HISTORY: logs each access to Administrator Menu, as well as
changing password and clearing statistics
Event lists can not be cleared, unless you initialize the machine. In this case, all the entries
except Machine Init History are cleared.
Hardware Test
Contains various hardware tests:
1. INPUT TEST: test hardware buttons and keylock
2. SOUND TEST: test the sound
3. PRINTER TEST: print test tickets
4. BILL ACCEPTOR TEST: pulse and serial bill acceptor test
Input Test
This menu item contains the I/O test tool. It is possible to test each button as well as
the assigned lamp. Press a button to see how it's mapped on the game board harness.