Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    Comments 3

    Uploaded by

    Eleazar Saclolo
    The document discusses verifying dimensions on site for a construction project. It specifies distances and thicknesses for a parapet wall, including allowing 10cm from the wall and a parapet height of 49cm. It notes that all dimensions and thicknesses should be verified on site according to the construction phase before fabrication. The contractor should comply with all site conditions, specifications, and supervisor comments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Comments 3

    Uploaded by

    Eleazar Saclolo
    16 views1 page
    The document discusses verifying dimensions on site for a construction project. It specifies distances and thicknesses for a parapet wall, including allowing 10cm from the wall and a parapet height of 49cm. It notes that all dimensions and thicknesses should be verified on site according to the construction phase before fabrication. The contractor should comply with all site conditions, specifications, and supervisor comments.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses verifying dimensions on site for a construction project. It specifies distances and thicknesses for a parapet wall, including allowing 10cm from the wall and a parapet height of 49cm. It notes that all dimensions and thicknesses should be verified on site according to the construction phase before fabrication. The contractor should comply with all site conditions, specifications, and supervisor comments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views1 page

    Comments 3

    Uploaded by

    Eleazar Saclolo
    The document discusses verifying dimensions on site for a construction project. It specifies distances and thicknesses for a parapet wall, including allowing 10cm from the wall and a parapet height of 49cm. It notes that all dimensions and thicknesses should be verified on site according to the construction phase before fabrication. The contractor should comply with all site conditions, specifications, and supervisor comments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Verify the dimension

    as per site.

    10cm

    Provide 10cm. distance


    from wall parapet & verify
    the thickness of parapet.

    49cm.
    Verify on site, with parapet
    area as per site condition
    (height=49cm) from slab
    finish level and verify also
    the thickness of parapet.

    Comment:
    1. All sections and thicknesses are according to what was
    done in the load calculations.
    2. Compliance of all materials and accessories to be used should be
    as per RSG specification.
    3. Whenever there are changes or additional materials needed by
    the client, the contractor is responsible for making the necessary
    arrangements.
    4. Verify all dimensions & level on site according to the construction
    phase before the fabrication.
    5. Contractor should complying the all SC's comments.

    You might also like