Scribd
Upload
66 views1 page

BH-485-CL Digital Residual Chlorine Sensor

The digital residual chlorine sensor is a new intelligent water quality sensor independently developed by BOQU Instrument. It uses an advanced non-membrane constant voltage sensor that does not require changing membranes or reagents, providing stable, simple, and accurate residual chlorine measurements. The sensor has high sensitivity, fast response, measurement accuracy, stability, repeatability, and is easy to maintain and use for monitoring residual chlorine in water treatment applications.

Uploaded by

Remigild Peter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views1 page

BH-485-CL Digital Residual Chlorine Sensor

The digital residual chlorine sensor is a new intelligent water quality sensor independently developed by BOQU Instrument. It uses an advanced non-membrane constant voltage sensor that does not require changing membranes or reagents, providing stable, simple, and accurate residual chlorine measurements. The sensor has high sensitivity, fast response, measurement accuracy, stability, repeatability, and is easy to maintain and use for monitoring residual chlorine in water treatment applications.

Uploaded by

Remigild Peter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Shanghai BOQU Instrument Co.

,Ltd Contact: Jori Liu


Website:www.boquinstruments.com Mobile: +86 17507082182

BH-485-CL Digital Residual Chlorine Sensor


The digital residual chlorine sensor is a new generation of intelligent water quality detection

digital sensor independently developed by BOQU Instrument. Adopt advanced non-membrane

constant voltage residual chlorine sensor, no need to change diaphragm and medicine, stable

performance, simple maintenance. It has the characteristics of high sensitivity, fast response,

accurate measurement, high stability, superior repeatability, easy maintenance, and multi-function.

It can accurately measure the residual chlorine value in solution. It is widely used in

self-controlled dosing of circulating water, chlorine control in swimming pools, and continuous

monitoring and control of residual chlorine content in aqueous solutions in drinking water

treatment plants, drinking water distribution networks, swimming pools, hospital waste water, and

water quality treatment projects.

Technical Features

1. Isolation design of Power and output to ensure electrical safety.

2. Built-in protection circuit of power supply & communication chip

3. Comprehensive protection circuit design

4. Work reliably without additional isolation equipment.

4. Built-in circuit, it has good environmental resistance and easier installation and operation.

5, RS485 MODBUS-RTU , two-way communication, can receive remote instructions.

6. The communication protocol is simple and practical, and it is extremely convenient to use.

7, Output more electrode diagnostic information, more intelligent.

8. Integrated memory, store the stored calibration and setting information after power off..

Technical Parameters

1) Chlorine Measurement range: 0.00 ~ 20.00mg / L


2) Resolution: 0.01mg / L
3) Accuracy: 1% F.S.
4) Temperature compensation: -10.0 ~ 110.0 ℃
5) SS316 housing, platinum sensor, three-electrode method
6) PG13.5 thread, easy to install on site
7) 2 power lines, 2 RS-485 signal lines
8) 12VDC power supply, power supply fluctuation range ± 10%, 2000V isolation

You might also like