Scribd
Upload
85 views1 page

Li-Ion/polymer 1cell Protector: Features

The document describes the R5402N Series protection ICs, which are designed to protect rechargeable one-cell lithium-ion or lithium polymer batteries from over-charge, over-discharge, excess discharge current, and excess charge current. The ICs contain voltage detectors, reference units, delay circuits, oscillators, counters, and logic circuits. They are available in an SOT-23-5 package and are suitable for protecting battery packs in cell phones and other devices using lithium-ion or lithium polymer batteries.

Uploaded by

saber
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views1 page

Li-Ion/polymer 1cell Protector: Features

The document describes the R5402N Series protection ICs, which are designed to protect rechargeable one-cell lithium-ion or lithium polymer batteries from over-charge, over-discharge, excess discharge current, and excess charge current. The ICs contain voltage detectors, reference units, delay circuits, oscillators, counters, and logic circuits. They are available in an SOT-23-5 package and are suitable for protecting battery packs in cell phones and other devices using lithium-ion or lithium polymer batteries.

Uploaded by

saber
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

R5402N Series

Li-ion/polymer 1Cell Protector


The R5402Nx Series are high input voltage CMOS-based protection ICs for over-charge/discharge of rechargeable one-cell
Lithium-ion (Li-ion) / Lithium polymer excess load current, further include a short circuit protector for preventing large external short
circuit current and excess charge/discharge-current.
Each of these ICs is composed of four voltage detectors, reference units, a delay circuit, a short circuit protector, an oscillator, a
counter, and a logic circuit. SOT-23-5 package is available.

FEATURES
• Supply Voltage (VDD)····························
12V (Absolute Maximum Rating) • Excess Detector Threshold Range ···· 0.05V to 0.20V (0.005V steps)
• Charger Negative Input Voltage (V-) ··· -35V (Absolute Maximum Rating) discharge-current Detector Threshold Accuracy ····· ±15mV
• Operating Input Voltage Range (VDD) ····· 1.5V to 5.0V (VDET3) Output Delay Time (tVDET3) ···· Typ. 6ms or 12ms
• Supply Current (IDD) ·····························
Typ. 4.0μA • Excess Detector Threshold Range ···· -0.1V
• Standby Current (Is) ·····························
Max. 0.1μA (C Version) charge-current Detector Threshold Accuracy ····· ±30mV
Max. 2.0μA (B, D Version) (VDET4) Output Delay Time (tVDET4) ···· Typ. 8ms or 16ms
• Over-charge Detector Threshold Range······· 4.0V to 4.5V (0.005V steps) • Short Protection Voltage (Vshort)······················· Typ. 0.8V
(VDET1) Detector Threshold Accuracy··· ±25mV (25°C) Output Delay Time (tshort) ······ Typ. 200μs or 300μs
±30mV (-5 to 55°C) • 0V-battery charge············································· Available
Output Delay Time (tVDET1) ······ Typ. 1.0s or 0.25s • Package ··························································· SOT-23-6
• Over-discharge Detector Threshold Range······· 2.0V to 3.0V (0.1V steps)
(VDET2) Detector Threshold Accuracy··· ±2.5%
Output Delay Time (tVDET2) ······ Typ. 20ms

BLOCK DIAGRAMS
R5402NxxxxB R5402NxxxxC R5402NxxxxD
VDD VDD VDD

DC Circuit DC Circuit DC Circuit


Oscillator Counter Oscillator Counter Oscillator Counter

Logic Level Logic Level Logic Level


Circuit Shift Circuit Shift Circuit Shift
VD1 VD1 VD1
Short Short Short
Delay Delay Delay
Detector Detector Detector
VD4 Logic VD4 Logic VD4 Logic
Circuit Circuit Circuit
VD2 VD2 VD2

VD3 VD3 VD3

VSS DOUT COUT V- VSS DOUT COUT V- VSS DOUT COUT V-

SELECTION GUIDE
Package Quantity per Reel Part No.
SOT-23-6 3,000 pcs R5402N.xxx.$.∗ -TR-FE
.xxx : Serial Number for the R5402 Series designating input four threshold for .∗ : Designation of version symbols
over-charge, over-discharge, excess discharge-current, and excess (.B.) With Latch function after Over-charge, Auto Release after Over-discharge
charge-current detectors (.C.) With Latch function after Over-charge and Over-discharge
.$.: Designation of Output delay time option of over-charge, (.D. ) Auto Release after Over-charge and Over-discharge
excess discharge-current, and excess charge-current.
(.C.) tVDET1=1.0s, tVDET3=12ms, tVDET4=16ms
(.E.) tVDET1=1.0s, tVDET3=6ms, tVDET4=8ms
(.F.) tVDET1=0.25s, tVDET3=12ms, tVDET4=16ms
(.K.) tVDET1=1.0s, tVDET3=12ms, tVDET4=8ms

PACKAGE (Top View)


SOT-23-6

6 5 4 1 DOUT
2 V-
3 COUT
4 NC
5 VDD
1 2 3
6 VSS

APPLICATIONS
• Li-ion / Li polymer protector of over-charge, over-discharge, excess discharge-current, excess charge-current for battery pack
• High precision protectors for cell-phones and any other gadgets using on board Li-ion / Li polymer battery

Li-ion/polymer 1Cell Protector

You might also like