W Series

Color Screen Fingerprint & Card

Time Attendance and Access Control

W1 W2
W1 & W2 Features

* Standard 2.8-inch TFT LCD, 512MB Flash, industrial high speed CPU
* Touch keypad & touch active sensor
* Identification mode: Fingerprint, Password, Card (optional)
* Cloud management systerm support
* Support webserver: basic setting, personnel inquiry and management, records inquiry
* DDNS: Support dynamic domain name server which offers a persistent domain name for
non-static IP devices
* Support TCP/IP network communication, the access control data and events will push to the
access control management software by real time.
* With 32 customize access control time zone and 16 permission groups make access control
more easy (W2 access control)
* Communication: TCP/IP, Mini USB, USB Host,RS485 (RS485 is for W2 access control)
* W2 In/Out: 1 relay output, wiegand input/output, door switch, door sensor, tamper alarm
* Registration capacity: 3000 Fingerprints and 100000 Records

1. What’s in the package?

1 Device 2 Instruction Package 3 Accessory Package

Color Scre
en Fingerpr W Series
int & Card
Time Atte
ndance
and Acce
ss Control

*Power adapter
C
ar

is only for W1
d

W1
W2

*Card is optional
W1 or W2
*Two extended function connector
cables are only for W2

2. Mount the Device to Wall

* Install the mounting panel on th wall
* Plug in the Ethernet cable,charger or extended function connector cable
* Slide the W1 or W2 down onto the panel and secure with the screw on the bottom of device

-1-
 W1 W2

Wiring Instruction

Mini USB

Power DC input port

RJ45 Network interface

TCP/IP

W1
-2-
 Mini USB

J1 J12
WO1 WO0 BELL- BELL+ PWR OPEN NO NC

GND
DC12V
WI1 WI0 GND 485A 485B DM GND COM

Extended function interface

TCP/IP
RJ45 Network interface

J12 Extended function interface：

Wiegand 26 Output Active doorbell Relay Output

Funcition Passive
doorbell
Exit Button
Wiegand Wiegand
DATA1 Output DATA0 Output
Door Bell- Door Bell+ NO NC

No. ② ④ ⑥ ⑧ ⑩ 14 16
Cable Color Yellow Blue Green Black Purple Red Blue Black

Wiegand 26 Input RS485 Door Magnetic

Funcition Wiegand Wiegand Door
COM
DATA1 Input DATA0 Input GND RS485A RS485B Magnetic GND

No. ① ③ ⑤ ⑦ ⑨ 13 15
Cable Color Organge Brown White Red Gray White Brown Red

Important notice: Please follow the wiring diagram as it is displayed. Damaged products diagram as
it is displayed. Damaged products due to improper wiring are not covered under the product warranty.

-3-
 W2 & Switching Power Supply

J1

GND
DC12V
Passive doorbell
Exit button

10 12 14 16

WO1 WO0 BELL- BELL+ PWR OPEN NO NC

J12

WI1 WI0 GND 485A 485B DM GND COM

1 3 5 11 13
W1
W0 Door Open Sensor
GND

Wiegand Card Reader

W2 & Anviz SC011

SC011 can work with W2 by Anviz encrypt Wiegand code authorized to
set up a distributed access control system. Wiegand mode must be set to
‘AnvizWiegand’ by PC software. You can buy SC011 from our sales.

J1
DC12V
GND
Active doorbell
② ④ ⑥ ⑧
+5V
WO1 WO0 BELL- BELL+ PWR OPEN NO NC
J12

WI1 WI0 GND 485A 485B DM GND COM

-4-
Anviz Wiegand date output format：
ALL registered users output devieces’ last eight serial number.
(For example, SN of one device is 1050000014470004, then
Anviz Wiegand output 14470004.)
Wiegand 26 date output format (W2 & other access control):
Card user: Output card number.(Decimal)
Fingerprint user: Output ID number.

W2 & Access Control Power Supply

Exit button

J1
GND
DC12V

Active doorbell
⑥ ⑧
+5V

WO1 WO0 BELL- BELL+ PWR OPEN NO NC

J12

WI1 WI0 GND 485A 485B DM GND COM

11 13

Door Open Sensor

-5-
 1. Turn on the Device

Plug in the power supply and wait for the device

boot up.

Set

2. Add Users to Device

Scan the same finger three times to enroll the

fingerprint.

* RFID Card is the optional feature. If you have the card option and want to enroll the card, use the up & down key to move the cursor
to card number field. Swipe the card in the field of card module. The card number will be displayed.
-6-
5. Setup the Device Communication
or close Ehernet

-7-
-8-
How to connect the Device with Software?

1 Loose the screw on the bottom of device, then

pull up the front case, seperate from back
panel
2 Connect USB cable between with device and
PC which has installed software

Local Area Network (TCP/IP)

Right click on the device icon

and choose ‘Set the IP configuration’
to set correct network enviroment
parameters such as above window.

2. Enable Commucation between Device and the Management Software CrossChex

W1 or W2
Device

Device
Device

Device Device

-9-