2006

Pneumatically operated 3/2 way

seat valve CLASSIC

• For mixing or distributing of mediums

• Controlled by a pilot valve or centrally by a valve island
• Flow optimized body in stainless steel
• Long service life and maintenance-free operation

Type 2006 can be combined with…

Type 8697 Type 8640 Type 8644 Type 6012 Type 6014 Type 8840

Feedback unit Valve block Valve block Pilot valve Pilot valve

The Bürkert 3/2 way seat valve, Type 2006,

Technical data
consists of a pneumatically operated CLAS- Orifice DN15 … 50
SIC actuator and a 3 way valve body. The Body materials Stainless steel 316L
actuator is available in two different materi- Nominal pressure PN16 (body)
als, PA or PPS, depending on the ambient Actuator material PA (PPS on request)
temperature. Interchanging of pressure and Seal material PTFE
service ports enables different fluidic circuit Media Water, alcohol, oils, fuels, hydraulic fluid, alkaline solu-
functions, such as the mixing or distributing tions, salt solution, organic solutions, hot water, steam
of mediums. The flow-optimized valve body Viscosity Max. 600 mm2/s
of Type 2006 allows excellent flow rates. Packing gland PTFE V-rings with spring compensation
(with silicone grease)
The tried and tested self-adjusting gland
Media temperature - 10 to + 180 °C
secures a high level of tightness and thus
Ambient temperature
ensures reliable operation over years. The 3
PA actuator - 10 to + 60 °C
way valve Type 2006 is controlled by a pilot PPS actuator
valve, or by centralized automation using a Actuator sizes Ø 50 … 80 + 5 to + 140 °C
valve island. It can be equipped easily with Actuator sizes Ø 125 + 5 to + 90 °C, (up to 140 °C for a short period)
an electrical position indicator. For the user, Installation As required, preferably with actuator in upright position
the compact Type 2006 is thus often an Control medium Neutral gases, air
economic alternative instead of two single Max. pilot pressure 10 bar
7 bar with actuator Ø 125
shut-off valves.
Port connections G thread acc. to EN ISO 228-1
NPT thread acc. to ANSI B 1.20.1
(RC thread on request)
Approval and Conformity EGV 1935/2004 (optional)
FDA (optional)

www.burkert.com 1/5
 2006

Materials

Description Material
1 Transparent cap Polycarbonate (PC)
(with PPS - actuator PSU)
1 2 O-Ring FKM
3 Actuator Polyamide (PPS)
2 4 Pilot air ports G ¼ Stainless steel 1.4305
3 5 Cylinder seal NBR
(with PPS - actuator FKM)
6 Spindle seal PTFE
4 7 Tube 2)
Stainless steel 1.4401 / 316
Stainless steel 1.4404 / 316L3)
8 Tension spring Stainless steel 1.4310
5 9 Nipple2) Stainless steel 1.4401 / 316
Stainless steel 1.4404 / 316L3)
10 Wiper PTFE
PEEK1)
6 11 Spindle Stainless steel 1.4404 / 316L
7 12 Plug Stainless steel 1.4404 / 316L
8 13 Seals PTFE

6 14 Valve body Stainless steel 1.4404 / 316L

9 15 Seat nipple Stainless steel 1.4404 / 316L
10
1)
For actuator size 125 mm
2)
One-piece with the drive sizes 63 mm to 125 mm
14 3)
For actuator sizes 63 mm to 125 mm
11

12
13

15

Temperature chart

■ Note: For PA actuators in the sizes 50 and 63, the combination of max. media temperature and max. ambient temperature is as
shown in the following chart:

Ambient temperature °C
70

60 Ø 63

Ø 50
50

40

30

20
100 120 140 160 180 200

Medium temperature °C

2/5
 2006

Connections for fluidic circuit functions C, D, E and F

Actuator with control function A C 2 When de-energised, pressure port 1

When de-energised port connection 1 is closed with spring closed, service port 2 exhausted
1(P) 3

Fluidic When de-energised, pressure port 3

circuit D 2
connected to service port 2, exhaust
function Connection - port
port 1 closed
1 2 3 3(P) 1

C P A R
D R A P Mixer valve
E 2 When de-energised, pressure port 3
E P1 A P2
connected to service port 2, pressure
F A P B 3 2 1(P1) 3(P2) port 1 closed

A, B service ports
1
P, P1, P2 pressure ports Distributor valve
F 1 3 When de-energised, pressure port 2
R exhaust port
connected to service port 3, service
2(P) port 1 closed

Dimensions [mm]

E Orifice Actuator Port A E H T

size Ø connection D
15 50 G½ 85 64 178 54
63 80 220 54
20 50 G¾ 85 64 178 54
63 80 220 54
25 63 G1 105 80 220 54
32 80 G1¼ 130 101 249 68
125 158 345 68
H

40 63 G1½ 130 80 226 68

80 101 249 68
125 158 345 68
50 125 G2 150 158 352 72
D
T

D
A

3/5
 2006

Ordering chart for valves with port 1 closed by spring action (other versions on request)
Threaded connection acc. to EN ISO 228-1
Max. operating
KV value
pressure to 180 °C
Actuator water [m /h] Min. pilot
3
[bar] Weight Item no. Item no.
Control Port Orifice
size Ø pressure [kg] PA PPS
function connection [mm]
[mm] [bar] 2g3 actuator actuator
1g2 2g3 1g2
2g1

A 3/2 way, G½ 15 50 7 4.5 4.4 11 16 1.3 287191  287202 

normally closed 63 8 4.5 4.7 16 16 1.6 287192  287203 
(NC) (port1) G¾ 20 50 9 6.2 4.4 11 16 1.3 287193  287204 

63 11 5.6 4.7 16 16 1.6 287194  287205 
G1 25 63 17 11 4.9 10 16 2.1 287195  287206 
G1¼ 32 80 32 21 6.0 9 16 4.3 287196  287207 
125 35 24 3.4 14 16 8.1 287197  287208 
G1½ 40 80 35 24 6.0 9 16 4.3 287199  287210 
125 35 24 3.4 14 16 8.1 287200  287211 
G2 50 125 51 35 4.3 10 16 9.5 287201  287212 

Threaded connection with NPT thread acc. to ANSI B 1.20.1

Max. operating
KV value Min.
pressure to 180 °C
Actuator water [m3/h] pilot Item no. Item no.
Control Port Orifice [bar] Weight
size Ø pres- [kg] PA PPS
function connection [mm]
[mm] sure 2 g3 actuator actuator
1g2 2g3 1g2
[bar] 2 g1

A 3/2 way, NPT ½ 15 50 7 4.5 4.4 11 16 1.3 292542  292553 

normally 15 63 8 4.5 4.7 16 16 1.6 292543  292554 
closed (NC) 9 6.2 4.4 11 16 1.3
NPT ¾ 20 50 292544  292555 
(port1)
20 63 11 5.6 4.7 16 16 1.6 292545  292556 
NPT 1 25 63 17 11 4.9 10 16 2.1 292546  292557 
NPT 1 ¼ 32 80 32 21 6.0 9 16 4.3 292547  292558 
32 125 35 24 3.4 14 16 8.1 292548  292559 
NPT 1 ½ 40 80 35 24 6.0 9 16 4.3 292550  292560 
40 125 35 24 3.4 14 16 8.1 292551  292561 
NPT 2 50 125 51 35 4.3 10 16 9.5 292552  292562 

Port conection
RC thread

Pilot pressure chart (CFA, flow direction 3 g 2)

Ø125
DN40/32 Ø125
Ø63
Ø50

Ø63

DN32/40 Ø80

Actuator size
DN15/20
DN15/20

Orifice
DN25
DN50
Operating pressure [bar] at port 3

16
14
12
10
8
6
4
2
0
0 1 2 3 4 5 6 7 8 9 10
Pilot pressure [bar]

4/5
 2006

Ordering chart for accessories

3/2 way pilot valves with banjo bolts
Seal material valve FKM, seal material banjo bolt NBR
Valve for Type Pressure Service Orifice QNn Pressure Electrical coil Power Item no. Voltage/
actuator size inlet P port A [mm] value air range connection consumption frequency [V/Hz]
[Ø mm] (valve body) (banjo bolt) [l/min] [bar] Ind. Std. [W] 024/DC 230/50
50 … 63 6012P Tube fitting Ø6 G¼ 1.2 48 0 … 10 Form B 4 552283  552286 
mm
50 … 125 6014P G¼ G¼ 2 120 0 … 10 Form A 8 424103  424107 

Cable plug Type 2507, Form B or Type 2508, Form A Item no.
Type 2507, Form B Industrial standard, 0 … 250 V without circuitry (Type 6012 P) 423845 
Type 2508, Form A acc. DIN EN 175 301-803, 0 … 250 V without circuitry (Type 6014 P, Type 0331P) 008376 
For further accessories see the accessories datasheet Type 2XXX for the full options programme.

Type 8697 Pneumatic feedback unit

End position feedback
ATEX / ATEX /
ATEX/ Item no.
IECEx IECEx
Inductive Inductive Inductive Micro Feed- IECEX Actuator
Micro Electrical Cat. Cat.
Switch Switch Switch Switch back Cat. 2G cULus series
Switch connection 3D/G 2D/G
3-wire 2-wire 2-wire 24 50 … 250 status Zone CLASSIC
24 V DC Zone Zone
PNP NAMUR V DC V AC/DC LEDs 1 4) Types 20XX
22/2 2) 21/1 3)

Feedback (without pilot valve)

2 yes Cable gland yes 248827 
2 yes Cable gland yes 255851 
2 yes M12 connector yes 255858 
2 yes M12 connector yes 250472 
2 yes Cable gland yes 248831 
2 yes Cable gland yes 255863 
2 yes Cable gland yes 248826 
2 yes Cable gland yes 255850 
2 Cable gland yes 248833 
2 Cable gland yes 248825 
Note: cULus only valid for versions without ATEX approval 2)
II 3D Ex tc IIIC T135 / II 3G Ex nA IIC T4 Gc
3)
II 2D Ex ia IIIC T135 °C IP64 / II 2G Ex ia IIC T4 Gb
4)
II 2G Ex ia IIC T4 Gb

Adapter kit

Description Actuator size Control function Item no.

Feedback Ø50/63/80 mm universal 682264 
Feedback Ø125 mm universal 682265 
Weitere Informationen siehe Datenblatt Typ 8697

To find your nearest Bürkert facility, click on the orange box g www.burkert.com

In case of special application conditions, We reserve the right to make technical

please consult for advice. changes without notice. 1712/4_EU-en_00895288

5/5