Scribd
Upload
110 views1 page

Manual

The XTMLA/A is an active mini line array speaker system intended for portable and installed applications. It features a 3-way design with an 8" woofer, 6.5" midrange, and two 1" compression drivers powered by a built-in tri-amplifier. The speaker produces up to 136dB of peak SPL and has a frequency response of 65-18,500Hz. It is compact at 64cm wide allowing for small and medium-sized line array configurations.

Uploaded by

Marcus Vinicyus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views1 page

Manual

The XTMLA/A is an active mini line array speaker system intended for portable and installed applications. It features a 3-way design with an 8" woofer, 6.5" midrange, and two 1" compression drivers powered by a built-in tri-amplifier. The speaker produces up to 136dB of peak SPL and has a frequency response of 65-18,500Hz. It is compact at 64cm wide allowing for small and medium-sized line array configurations.

Uploaded by

Marcus Vinicyus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

X - T R E M E

XTMLA/A MINI LINE ARRAY


active mini line array LF - MF - HF

TECHNICAL FEATURES
Power handling (LF) RMS .................250W
Power handling (MF) RMS................125W
Power handling (HF) RMS ................125W
Power handling Music ......................1000W
Power handling Peak .......................2000W
Frequency response.........................65÷18,5k Hz
Vert. Coverage angle (-6dB) .............15°
Horiz. Coverage angle (-6dB) ...........120°
Sensitivity (1W@1m) .........................103 dB/W/m
Peak SPL (@1m) ..............................136 dB/m
Continuous SPL (@1m) ....................129 dB/m

Amplifier output power ratings


LF section ........................................250W (@ 4 Ohm)
MF section .......................................125W (@ 4 Ohm)
HF section........................................125W (@ 4 Ohm)
GENERALITIES Power supply ...................................Switching technology
The XTMLA/A three-way active Mini Line Array element is designed
to deliver high-quality reinforcement of music and speech in a variety Transducers
of applications including concert audio and corporate A/V presentations LF sub system..................................1x8” SB812SP-4
of all types for both portable users and fixed venue installations. Nominal Impedance .........................4 Ohm
Input power rating ............................250W
COMPONENTS Sensitivity (1W@1m) .........................102 dB/W/m
XTMLA/A is a tri-amplified, compact, lightweight enclosure housing Calculated Max SPL (@1m) ..............125 dB/m
a 8” woofers, one 6” midrange radiator, and two high frequency MF sub system ................................1x6,5” SB6840-4
neodymium compression drivers. Advanced components and the Nominal Impedance .........................4 Ohm
new digital switching technology of the inner amplifier provide the Input power rating ............................150W
highest power-to-weight ratio of any speaker system in its class. Sensitivity (1W@1m) .........................98 dB/W/m
Enclosure features foam-backed low frequency grilles, dense Calculated Max SPL (@1m) ..............119 dB/m
protective foam inserts for midrange apertures, and a fine steel mesh HF sub system .................................2x1” CDB021TNB
grille to protect high-frequency apertures. Speaker cones are treated Nominal Impedance .........................2x8 Ohm
with weather-resistant compounds. Input power rating ............................2x80W
XTMLA/A allows high power and precise line array performance to Sensitivity (1W@1m) .........................115 dB/W/m
be generated from a column of tri-amped cabinets just 64cm wide Calculated Max SPL (@1m) ..............136 dB/m
making it perfect for small and medium sized tours and installations
in venues such as theatres. Physical
Enclosure .........................................Birch plywood
Input connectors ....................................Female XLR Cannon NC3
CABINET Output connectors ...........................Male XLR Cannon NC3
The loudspeaker cabinet is made with 3/4" (19 mm) birch plywood Inp. power supply connectors ................Neutrik Powercon NAC3
that is able to resist at any mechanical stress without vibrating. Out. power supply connectors................Neutrik Powercon NAC3
XTMLA/A is equipped with a proper rigging system, allowing flown Dimensions (LxHxP) .........................640x310x410 mm
arrays to be constructed rapidly and safely. The express-bar is Weight .............................................21 kg
designed to enable firm mounting as well as ground stacking.

Frequency response

In compliance with European Standards


Certified by Italian Quality Institute

X-TREME via Monti Urali, 31 - 42029 Reggio Emilia (Italy) • ph. +39 - 0522 - 557735 • fax +39 - 0522 - 393733 • e-mail: [email protected]

You might also like