Scribd
Upload
207 views5 pages

C-Data GPON OLT SFP Transceiver Class C++ Product Datasheet-V2.0

This document provides information on a GPON OLT SFP transceiver module that operates at 2.488 Gbps for transmission and 1.244 Gbps for reception. It uses a 1490nm laser for transmission and a 1310nm receiver. The module complies with relevant ITU-T and MSA standards and has an operating temperature range of 0-70°C. Diagnostic data on parameters like optical power, bias current, voltage and temperature are stored in the module's EEPROM.

Uploaded by

Diego Cárdenas Velásquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
207 views5 pages

C-Data GPON OLT SFP Transceiver Class C++ Product Datasheet-V2.0

This document provides information on a GPON OLT SFP transceiver module that operates at 2.488 Gbps for transmission and 1.244 Gbps for reception. It uses a 1490nm laser for transmission and a 1310nm receiver. The module complies with relevant ITU-T and MSA standards and has an operating temperature range of 0-70°C. Diagnostic data on parameters like optical power, bias current, voltage and temperature are stored in the module's EEPROM.

Uploaded by

Diego Cárdenas Velásquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

DATASHEET V2.

GPON OLT SFP Transceiver Class C++

Functional Feature

➢ SC BIDI SFP Single Mode Transceiver


1490nm Continuous Mode 2.488 Gbps DFB Transmitter
1310nm Burst Mode 1.244 Gbps APD-TIA Receiver
➢ Single +3.3 Power Supply, Hot-pluggable
➢ LVTTL receiver Fast Burst Packet Detect indication
➢ Burst mode received signal strength indication (RSSI) function
➢ Complies with Telcordia (Bellcore) GR-468-CORE
➢ Compliant with SFP MSA and SFF-8472
➢ Complies with ITU-T G.984.2 Class C++

Product Applications

➢ GPON OLT For P2MP Application

General

The AS60-PG43207-CPSS7 transceiver with supports data rate of typical 2.488 Gbps for
GPON OLT application up to 20km transmission distance, it’s designed meeting with ITU-T
G.984.2 Class C++ specifications. SC rececptacle is for optical interface.
The module provides digital diagnostic information of its operating conditions and
status, including transmitting power, laser bias, receiver input optical power, module
temperature, and supply voltage. Calibration and alarm/warning threshold data are written
and stored in internal memory (EEPROM). The memory map is compatible with SFF-8472,
as shown in Fig. 2. The diagnostic data are raw A/D values and must be converted to real
world units using calibration constants stored in EEPROM locations 56 – 95 in A2h.

2 wire address 1010000X (A0h) 2 wire address 1010001X (A2h)


0 0
Serial ID Defined by Alarm and Warning
SFP MSA (96 bytes) Thresholds (56 bytes)
55
Cal Constants
(40 bytes)
95 95
Vendor Specific Real Time Diagnostic
(32 bytes) Interface (24 bytes)
119
Vendor Specific (8 bytes)
127 127
Reserved User Writable
(128 bytes) EEPROM (120 bytes)
247
Vendor Specific (8 bytes)
255 255

Fig 2 EEPROM Information


Performance Specification

Absolute Maximum Ratings


Parameter Symbol Min. Max. Unit Note

Storage Temperature Tst -40 +85 °C

Operating Case Temperature Tc 0 70 °C


Input Voltage - GND Vcc V
Power Supply Voltage Vcc-Vee -0.5 +3.6 V
Recommended Operating Conditions
Parameter Symbol Min. Typical Max. Unit Note

Power Supply Voltage Vcc 3.135 3.3 3.465 V


Operating Case Tc 0 - 70 °C
Temperature
Data Rate TX - 2.488 - Gbps
RX - 1.244 -
Total Supply Current - - - 400 mA
Damage Threshold For - - - 4 dBm
Receiver

Optical Specification
Transmitter
Parameter Symbol Min. Typ. Max. Unit Note

Optical Central Wavelength  1480 1490 1500 nm -

Spectral Width (-20dB)  - - 1 nm -


Side Mode Suppression Ratio SMSR 30 - - dB -

AS60-PG432
Average Optical Output Power Po +4 +7 +10 dBm
07-CPSS7

Extinction Ratio Er 9 - - dB -
Rise/Fall Time Tr/Tf - - 150 ps -
Transmitter Total Jitter Jp-p - - 0.1 UI
Transmitter Reflectance RFL - - -12 dB
Average Lauched Power of Off Poff - - -39 dBm -
Transmitter
Differential Input Voltage VIN-DIF 300 - 1600 mV -
Tx Disable Input Voltage-Low VIL 0 - 0.8 V -
Tx Disable Input Voltage-High VIH 2.0 - Vcc V -

Output Eye Compliant with ITU-T G.984.2


Receiver
Parameter Symbol Min. Typ. Max. Unit Note
Operate Wavelength - 1280 1310 1340 nm -

AS60-PG432
Sensitivity Pr - - -30 dBm
07-CPSS7

AS60-PG432
Saturation Ps -10 - - dBm
07-CPSS7

LOS assert Level - -45 - - dBm -


LOS De-Assert Level - - - -30 dBm -
LOS Hysteresis - 0.5 - 5 dB -
Receiver Optical Reflectance - - - -12 dB -
Data Output Low Vol -2 - -1.58 V -
Data Output High Voh -1.1 - -0.74 V -
LOSOutput Voltage-Low VSD-L 0 - 0.8 V -
LOS Output Voltage-High VSD-H 2.0 - Vcc V
Note:
1. Minimum Sensitivity and saturation levels for an NRZ 223-1 PRBS. BER≤10-10, 1.244Gpbs, ER=9dB

EEPROM Information

Alarm and Warning Thresholds (Serial ID A2H)


C Temp Voltage Bias TX Power RX Power
Parameter(Unit)
(℃) (V) (mA) (dBm) (dBm)

High Alarm 100 3.6 90 +8 -10

Low Alarm -10 3 0 +4 -30

High Warning 95 3.5 70 +7.5 -11

Low Warning 0 3.1 0 +5 -29

Digital Diagnostic Monitor Accuracy


Parameter Unit Accuracy Range Calibration

Tx Optical Power dB Po: -Pomin~Pomax dBm, Recommended


±3 External/Internal
operation conditions
Rx Optical Power dB ±3 Pi: Ps~Pr dBm, Recommended operation External/Internal
conditions

Bias Current % Id: 1-100mA, Recommended operating


±10 External/Internal
conditions
Power Supply Voltage % ±3 Recommended operating conditions External/Internal
Internal Temperature ℃ ±3 Recommended operating conditions External/Internal

Package Diagram

Ordering information
Ordering P/Ns Description
GPON OLT Class C++, 20km, TX 1490nm 2.488Gbps, RX 1310nm
AS60-PG43207-CPSS7
1.244Gbps, SFP form-factor, SC/UPC Receptacle connector, 0~70℃

You might also like