Department Biochemistry

College Of Medicine And Health Sciences

Laboratory Machines And Equipments Purchase Request

SN Equipment type Measueme Qty Remar

nt k
1. Digital Fuzzy-Controlled Autoclaves-Steam Sterilizer No. 1
Specifications
• Controller;Digital Fuzzy-Control System (Fully Automatic)
• Capacity; 47 Lit.
• Temp.Range: Ambient 5℃ to 132℃
• Temp. Accuracy: ±0.5℃ at 121℃
• Display; Digital LCD (PV & SV and Sterilizing Procedure displayed)
• Timer; 99 hr 59 min 59 sec
• Safety Device; Over Temp., Over Pressure, Over Current Protector and
Electronic Door Lock System Heat-Proective Lid Cover
2. Magnetic "stirrer-heater" No. 5
Specifications
*         Model……………..SH-4
*         Voltage(V)…………220/110V
*         Power(W)…………..600
*         Speed(r.p.m)……….100 - 2000
*         Plate size(mm)……..190x190
*        Max temp.(plate surface………………..300 +/-10%
3. Analytical balance No. 2 each
Specifications
 Model: PW 254
 Accuracy: 0.01mg)
 Maximum capacity: 250g
 Readability: 0.0001g
 Repeatability (S.D.): 0.0002g
 Linearity (±): 0.0002g
 Pan size: 90mm Ø
 Calibration, with internal mass. Alternatively user can choose to calibrate using external
mass
 Draught shield dimensions (w x d x h): 202 x 158 x 215mm
 Overall dimensions (w x d x h): 256 x 524 x 275mm
 Net weight:12kg

Specifications
 Model ....................... HCB 3001
 Accuracy .................. 0.1
 Capacity………….... 3000gm
 Readability………… 0.1gm
 Repeatability……..... 0.2gm
 Linearity(+/-)………. 0.2
 Pan size…………….. 4.7''x120mmØ
4. TDS METER: TDS/CONDUCTIVITY / SALINITY / OXYGEN METER CCO-401 No. 1
Specifications
· The meter is equipped with an easy-to-read backlight LCD display with brightness control.
· Low weight and small size facilitate working in the field.
· Waterproof housing (IP-66) enables working in difficult conditions.
· Clock with date.
· Internal data logger enables storing up to 4000 results, taken in series or singly with
temperature, time and date.
· Powered by rechargeable batteries, with internal charging or by 6V power adapter.
· Possibility of connecting with a PC using RS-232 output or optionally by USB using an
adapter.
· The meter meets the GLP requirements. 
5. PH Meter
Digital PH Meter (Bench Top Type)
Specifications
• Model: CP-505 Poland made
• Powered with 12V power adapter
• Equipped with a large, easy-to-read backlight LCD display with brightness control.
• Calibration: 1÷5 points.
 • Automatic buffers detection
• Automatic correction of the temperature influence on sample solution (NIST) value.
• Memory of 3 electrodes’ characteristics
• Automatic or manual temperature compensation.
• Automatic evaluation of the condition of electrode’s membrane.
• Internal clock with date.
• Internal data logger for up to 950 sets of results collected in series or singly with
temperature, time and date.
• USB output.
• The meter meets the GLP requirement
• pH mV °C
• Range -2.000 ¸ 16.000 pH ±1999.9mV -50.0 ¸ 199.9 °C
• Resolution 0.001 pH or 0.01 pH 0.1mV 0.1 °C
• Accuracy* (± 1 digit) ±0.002 pH ±0.1 mV ±0.1 °C*
• Input impedance 1012W
• Compensation range -5 ¸ 110.0 °C
• Dimens. (mm) / Weight L=200, W=180, H=20/50 / 660 g

Digital PH-METER (Portable)

Specifications
• Model ...................CP-411
• Range…………0-14 pH
• Resolution…….0.01pH
• Accuracy (+/- 1 digit)…..+/-0.01pH
• Temp.compensation…….-5-110oc
• Temp.measurement range…….-50-199.9oc
• Temperature sensor………….pt-1000B
• Temperature accuracy (+/- 1 digit)………..+/-0.2oc
• Work time on 1 battery…………..700h
• Dimension (mm)…………L=149, W=82, H=22

6. Nilfix: Eliminator dry vacuum (Eliminator l, dry) No. 2

Specifications
- Capacity: 5 gal.
- Suction lift: 95”
- Airflow: 130 cfm
- Power: VAC
- Dimensions (WxHxD): 16”x22”x17”
7. PCR machine (Thermocycler) No. 1
Specifications
- Block Capacity: -96wells with two blocks - 0.2 ml tubes or 0.5 ml tubes size
- Programmable temp. range 4º to 99ºC
- Temp. accuracy/uniformity ±0.3ºC/±0.5ºC at 55ºC
- Max. heating/cooling rate 5ºC/4ºC per second
- Heating/cooling method Peltier
- Heated lid temperature 105ºC
- Program memory 100 programs
- Max. cycles/segments 99 cycles/9 segments
- Max. hold time/step 99 minutes 59 seconds
- Dimensions (WxDxH) 8.6 x 11.2 x 7 in
- 21.8 x 28.5 x 17.8 cm
- Weight 7.1 lb/3.2 kg
- Electrical 120V/230V, 50/60 Hz
8. Real time PCR No. 1
Specifications
 Real timer PCR tube: 0.2ml×96 0.5ml×77:0℃～99.9℃, temp3℃/:2℃/
 Block Capacity: 96wells ´0.2ml + 77wells ´0.5ml
 Block Temperature Range : 0°C ~ 99.9°C
 Max. Block Heating Rate: 3°C/sec
 Max.Block Cooling Rate : 2°C/sec
 Mode of Temperature Control : Sim-Tube
9. SDS vertical gel elecrophoresis complet set up with power supply No 1
10. Horizontal Gel electrophoresis complete Systems with gel documentation and camera and No 1
power supply
11. PCR plates Pack 5 each
12. PCR tips Pack 5 each
13. PCR tubes Pack 5 each
14. Casting systems No. 1
 Specifications
 Adjustable barrier with ultrasoft silicone gasket ensures leak-proof casting
 Mini flexicaster accommodates 7x7, 7x10, 10x7 and 10x10cm gel trays
 Maxi flexicaster accommodates 15x7, 15x10 and 15x15 and 20x10, 20x15, 20x20 and
20x25cm gel trays
15. UV Fluorescent Ruler Pack 2
 CSL-RULER UV Fluorescent Ruler
16. High Grade Agarose for Nucleic Acid Electrophoresis Bottle 2 each
Specifications
 CSL-AG100 Agarose 100g (1 x 100g Bottles)
 CSL-AG500 Agarose 500g (1 x 500g Bottles)
 CSL-AG1000 Agarose 1000g (2 x 500g Bottles)
 CSL-AG2000 Agarose 1000g (4 x 500g Bottles)
17. Buffers for Nucleic Acid Electrophoresis Litre 5 each
Specifications
 CSL-TBEP Powdered Tris-Borate-EDTA Running buffer - 10 Pouches (10 litres/pk)
 TAE50X1L Cleaver Buffer Tris-Acetate-EDTA Running Buffer 50X 1L
 TAE50X5L Cleaver Buffer Tris-Acetate-EDTA Running Buffer 50X 5L
 TBE10X1L Cleaver Buffer Tris-Borate-EDTA Running Buffer 10X 1 litre
 TBE10X5L Cleaver Buffer Tris-Borate-EDTA Running Buffer 10X 5 litres
18. Ready-to-Use DNA Markers Pack 2 each
Specifications
 CSL-MDNA-100bp 100 bp DNA Ladder (can be stored at Room temperature)
 CSL-MDNA-1kb 1 kb DNA Ladder (can be stored at room temperature)
 CSL-MDNA-BR Broad Range DNA Ladder, 250bp-8,000bp (can be stored at room
temperature)
 CSL-MDNA-HR High Range DNA Ladder, 1000bp-10,000bp (can be stored at room
temperature)
 CSL-MDNA-LR Low Range DNA Ladder, 125bp-3,000bp (can be stored at room
temperature)
 CSL-LOADDYE 10x Bromophenol Blue Loading Dye, 1ml
19. GelX disposable gel excision tips Bag 2 each
Specifications
 CSL- gelX4 4mm x 1mm 250/ bag
 CSL- gelX4RACK 4mm x 1mm 5 racks of 48
 CSL- gelX 6.5 6.5mm x 1mm 250/ bag
 CSL- gelX6.5RACK 6.5mm x 1mm 5 racks of 48
20. Vacuum pumps No. 1 each
Specifications
i. MZ 2C + 2 AK
 UNIT DIMENSIONS (W X L XH) 24.1 X 34.5 X 32.6CM
 VACUUM PUMP CHEMISTRY DIAPHRAGM PUMP

ii. MZ 2C
 NUMBER OF STAGES 2
 PUMPING SPEED 50/60 HZ 1.9M3/H / 2.1 M3/H // 1.2CFM
 ULTIMATE VACUUM (TOTAL) 9 MBAR // 6.8 TORR
 ULTIMATE VACUUM WITH GAS BALLAST 15 MBAR // 11 TORR
 INLET CONNECTION (IN) HOSE NOZZLE NW 10MM
 OUTLET CONNECTION (EX) HOSE NOZZLE NW 10MM
 WEIGHT 11.9KG
 PUMP FLOW RATE 35 L/MIN

1 CSL-PUMP300 CSL-PUMP400 CSL-PUMP410

 Voltage 110-120V 220-240V 110-120V 220-240V 110-120V 220-240V
 Frequency 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz
 Max. Power (W) 70 60 90 95 90 95
 Max. Flow Rate: 25 L/min 22 L/min 38 L/min 34 L/min 28 L/min 25 L/min
 Max. Vacuum: 600mmHg = 79kPa 600mmHg = 79kPa 740mmHg = 97kPa
 Max. Pressure: 25PSI 25PSI 30PSI 30PSI 40PSI 40PSI
 Net Weight 5.0kg 7.0kg 7.0kg
 Dimensions (LxWxH, mm) 210x112x220 280x112x210 270x144x190

21. CAPILLARY BLOTTERS No. 1

Specifications
- UNIT DIMENSIONS MINI 30 X 30 X 10CM
- W X D X H) MAXI 42 X 30 X 10CM

22. DOT AND SLOT BLOTTERS No. 1 each

Specifications
MODEL: CSL-D48 CSL-D96 CSL-S24 CSL-S48
CONFIGURATION: 3 X16 8 X12 2 X12 3 X 16
SIZE OF WELL: 6MM DIAMETER 6MM DIAMETER 6 X 0.5MM 6 X 0.5MM
12MM DEEP 12MM DEEP 12MM DEEP 12MM DEEP
VACUUM REQUIRED:------------ 600MG HG 0.8 BAR WITH COLD TRAP -------------
 UNIT DIMENSIONS:60X95X100CM 6 X105X140CM 60 X 74 X 83CM 60X95X 100CM
MEMBRANES SIZE REQUIRED: 12.1 X 4.4CM 11 X 7.4CM 12.1 X 4.4CM 12.1 X 4.4CM
23. uv crosslinker No. 1
Specifications:
 UV SOURCE 5X8W UV BULBS, 254, 302 OR 365NM
 EXPOSURE TIME 0 – 999.9 MINUTES
 ENERGY RANGES 0 – 99.99 J OR 0 – 9.999 J
 INTERNAL DIMENSIONS 26X33X14.5CM (WXDXH)
 FOOTPRINT 35X36CM
24. Safecloner No. 1
Specification:
 CSL-ETBRCLONER Complete unit for safe viewing of ethidium bromide stained gels
 CSL-ET/SYBRCLONER Complete unit for safe and DNA damage free viewing of
ethidium bromide, SYBR green and SYBR gold stained gels
 Each SafeCloner unit includes LED illuminator for gels up to 15x15cm, filter glasses
and a mains plug-in power supply.
 CSL-GLASSES1 Filter glasses for CSL-ETBRCLONER, 1 pair CSL-GLASSES Filter
glasses for CSL-ET/SYBRBR, 1 pair
25. Camera and related accessories No. 1
Camera
Specification:
 Type 5x optical / 4x digital zoom camera-
 Effective Pixels 14.7 megapixels
 CCD 1/1.7” high-density CCD
 Maximum Aperture f/2.8 (W) ~ f/4.5 (T)
 Shutter Speed 15 ~ 1/4000s
 Filters +3 Close up and EtBr; SYBR green
 Storage Media 2MB memory card
 Computer Interface USB 2.0 Hi Speed (mini-B jack)
 Video Out NTSC/PAL
Darkroom
Specifications:
 Multi-power Source For camera, inner white LED,
 Capture Manual-save in BMP format
 Inner White Light 2x3W LED
 Safety Device Safety door switch
 Weight & Dimensions 6.1kg; 290x220x320mm
 Voltage Rating 110~220V
Screen
Specifications:
 Type 8” TFT
 Resolution 600x800 Pixels
 Brightness 350 cd/mm2
 Constant Ratio 300 : 1
 Display Mode NTSC / PAL / SECAM mode
auto switching
Software
Specifications:
 Base package*:
1D image analysis plus colony counting and array analysis
TotalLab Quant
 Base package*:
1D image analysis with band pattern matching,
plus colony counting and array analysis
Phoretix 1D
 The Phoretix 1D Pro software is used to perform sophisticated
1D gel analysis.
Phoretix 1D Pro
Accessories
- Mitsubishi Thermal Printer for use with Microdoc - 110 - 240V CSL-PRINT
- Microdoc ethidium bromide filter CSL-MDOCEB
- Microdoc SYBR filter CSL-MDOCSBRG
- Replacement printer paper CSL-PRTPAP
- UV to white light conversion screen for transilluminator CSL-UVSCRN
26. Uv transilluminators No. 1
Specification
- FILTER SIZE 20 X 20 CM
- LIGHT SOURCE: 8W X 6 TUBES
- UV RESISTANT PLASTIC COVER: 33 X 25CM (WXD)
- UNIT DIMENSIONS WXLXH 34 X 29.5 X 10CM
27. Digital Centrifuges (different size and types) No. 2 each
Specifications
 Intelligent high speed refrigerated centrifuge30000r/min,：max
rcf62400×g :24×1.5/2.0ml
 Maximum rotate speed:30000r/min,
  Maximum centrifugal:62400×g， Angle Rotor，
 Capacity：24×1.5/2.0ml
28. Cool cube No. 5
Specifications
 TEMPERATURE: 0°C FOR UP TO 4 HOURS
 CAPACITY: 36 X 1.5ML
96 X 0.2ML
12 X 0.2ML PCR STRIPS
1 X 96 WELL PCR PLATE
 DIMENSIONS: 142 X 142 X 63.5MM
 WEIGHT: 900G
 MATERIAL: DURASTAR POLYMER
29. Ice buckets No. 10 each
Specifications
 CSLIB Large Ice Bucket - White
 CSLIBLID Lid For Large Ice Bucket – White
 CSMIB Mini Ice Bucket - White
 CSL-COOLCUBE Coolcube Storage Rack
30. Eppendorf 5702 Series Centrifuges No. 2
Specification

• Capacity 4 x 85mL
• Maximum Speed/Force 4400rpm (3,000 to 3,999 x G)
• Speed Control Variable, microprocessor-based
• Timer 30 sec. to 99 min., plus Hold
• Temperature Control (Models 5702R/5702RH only) -9° to +40°C (16° to 104°F)
• Electrical Requirements 120V 60Hz, 230V 50/60Hz
• Model 5702 Dimensions 16D x 12.5W x 9.5 in.H (41 x 32 x 24cm)
• Models 5702R/5702RH Dimensions 22.75L x 15W x 10.25 in.H (58 x 38 x 26cm)
31. Eppendorff tube pack 15
32. UV machine with spectrophotometer and with full accessories No. 1
i. OPTIZEN POP
 UV-VIS Spectrophotometer
A. System configuration
 UV-Vis spectrophotometer (OPTIZEN POP)
 Quartz Cell - 3.5ml / path length 10mm
 Operating Manual
B. Hardware Specification
UV-Vis spectrophotometer
 Photometric system : Single Beam Optics
 Spectral band width : < 1.8nm
 Wavelength range : 190 - 1100nm
 Wavelength accuracy : < ±0.5nm (at D₂ Peak 656.1nm, 486.0nm)
 Wavelength repeatability : ±0.1 nm
 Wavelength slew rate : about 7,800nm / min
 Scan Speed : Max 4,000nm / min
 Photometric display range : - 3.0 ~ 3.0 A (Enable to set up)
 Photometric accuracy : ± 0.005A (at 1.0Abs)
 Photometric reproducibility : ± 0.003A (at 1.0Abs)
 Stray right : < 0.05 %T at 220 and 340nm
 Baseline stability : ≤ ± 0.001 A/h (at 550nm)
 Baseline flatness : ≤ ± 0.002 A (200 ~ 1100nm)
 Light Source : Tungsten-halogen lamp and Deuterium lamp
 Monochromator : Modified Czerny-turner type with 1200lines/nm
 Display : 7 inch TFT LCF touch screen
 Standard cell holder : Automatic rotary type 8-position multi-cell holder
 Interface ports : 4USB ports / 3 RS-232C ports
 Data capacity : 2GB (Option : 8GB)
 Detector : Silicone Photodiode
 Power requirement : Free Voltage
 Dimension : W433 x D381 x H180
 Weight : 8kg
C. Software Description
Built in software
 ABS/%T/Conc. With STC
 Standard curve
 Survey scan
 Simple Kinetics
 Online S/W upgrade
33. ii. Radiation safety Pack 2 each
A. Shields
Specifications
 CSR-S1 CSR-S1G Small Fixed 15° Angle - Flat Base 30 x 45cm, Base 30 x 30cm
 CSR-S1T CSR-S1TG Small Fixed 15° Angle - Curved Base 30 x 45cm
  CSR-S2 CSR-S2G Large Fixed 15° Angle - Flat Base 35 x 53cm, Base 35x30cm
 CSR-S2T CSR-S2TG Large Fixed 15° Angle - Curved Base 35 x 53cm
 CSR-S1O CSR-S1OG Small Fixed 45° Angle - Flat Base 30 x 45cm, Base 30 x30cm
 CSR-S1OT CSR-S1OTG Small Fixed 45° Angle - Curved Base 30 x 45cm
 CSR-S2O CSR-S2OG Large Fixed 45° Angle - Flat Base 35 x 60cm, Base 30 x30cm
 CSR-S2OT CSR-S2OTG Large Fixed 45° Angle - Curved Base 35 x 60cm
B. Tray and Liners
Specifications
Tray Size Radiation Hazard Tray, Yellow BioHazard Tray, White General Purpose Tray, White
APET liners, pk 25
46x26cm CSR-TY1 CSR-TO1 CSR-TW1 CSL-TL1
54x34cm CSR-TY2 CSR-TO2 CSR-TW2 CSL-TL2
57x54cm CSR-TY3 CSR-TO3 CSR-TW3 CSL-TL3
68x54cm CSR-TY4 CSR-TO4 CSR-TW4 CSL-TL4
70x46cm CSR-TY5 CSR-TO5 CSR-TW5 CSL-TL5
113x54cm CSR-TY6 CSR-TO6 CSR-TW6 CSL-TL6
C. Cabinets
Specifications
- BETA GAMMA
- CSR-CAB CSR-CABG Beta Work Cabinet, 49 x 55 x 37cm
D. Storage boxes
Specifications
BETA GAMMA Box Size
CSR-B0.4 CSR-B0.4G Mini 5.5 x 8.5 x 8.5cm
CSR-B0.8 CSR-B0.8G Midi 6 x 16.5 x 8.5cm
CSR-B6.5 CSR-B6.5G Maxi 14 x 28 x 16.5cm
CSR-B3.5 CSR-B3.5G Box for four way racks 14 x 17.5 x 15cm
CSR-B8 CSR-B8G Transport Box 7.5 x 29.5 x 38cm
CSR-BDUO CSR-BDUOG Duo Box 7 x 10 x6cm
CSR-BLOCK CSR-BLOCKG Block for 4 x 1.5ml Eppendorf tubes 5x3.5x14cm
CSR-BLOCKL CSR-BLOCKLG Cover for B4 1 x 3.5 x 14cm
CSR-STORE CSR-STOREG Beta-Storage/Transport Block 7 x 15 x 12cm
CSR-COV CSR-COVG Carboy Cover 59 x 38 x 38cm
E. Inserts
Specifications
- CSR-R1.5 Mini Box Insert - 16 x 1.5ml tubes
- CSR-R50 Maxi Box Insert - 8 x 50ml Centrifuge tubes
- CSR-R0.5 Mini Box Insert - 20 x 0.5ml tubes
- CSR-R3F Maxi Box Insert - 3 x Falcon tubes, 8 x 1.5ml tubes
- CSR-R1.5L Midi Box Insert - 32 x 1.5ml Eppendorf tubes
- CSR--R2F Box Insert - 2 x Falcon tubes, 8 x 1.5ml tubes
- CSR-R0.5L Midi Box Insert - 40 x 0.5ml Eppendorf tubes
F. Waste bins
Specifications
CSR-B1 CSR-B1G 1L, use with bag CSR-BAG1 13 x 10 x 8cm
CSR-B2TIP CSR-B2TIPG 2L, use with bag CSR-BAG1 13 x 13x 13cm
CSR-B2MCTIP CSR-B2MCTIPG 2L, use with bag CSR-BAG1 13 x 13x 13cm
CSR-B3 CSR-B3G 3. 3L, use with bag CSR-BAG1 15 x 15 x 15cm
CSR-B10 CSR-B10G 10L, use with bag CSR-BAG2 25 x 20 x 20cm
CSR-B15 CSR-B15G 15L, use with bag CSR-BAG2 29.5 x 21.5 x 23.5cm
34. iii. UV sterilization cabinets No. 2
Specifications
 UV LIGHTS MAXI 4 X 15 WATT MINI 4 X 15 WATT
 WHITE LIGHT MAXI 15 WATT MINI 15 WATT
 DIMENSIONS MAXI 770 (H)X560 (W)X420MM (D) MINI 510 (H)X560 (W)X350MM (D)
 WEIGHT MAXI 19 KG MINI 12 KG
35. Hybridization/incubators No. 3
Specifications
 CHAMBER TEMPERATURE AMBIENT TO 85°C
 TEMPERATURE INCREASE 0.1°C
 TEMPERATURE UNIFORMITY IN WORKING AREA AT 37°C ± 0.2°C
 CHAMBER TEMPERATURE ACCURACY AT 37°C ± 0.2°C
 ROTISSERIE SPEED (ALL MODELS) 5-100 RPM
 VORTEX PLATFORM SPEED 5-1500 RPM
 ORBITAL PLATFORM SPEED 0-200 RPM
 ROCKING PLATFORM SPEED 5-100 RPM
 RECIPROCAL PLATFORM SPEED 5-100 RPM
 CHAMBER DIMENSIONS 340X260X250 MM
 OVERALL DIMENSIONS 360X440X430 MM
 WEIGHT 25 KG (APPROX)
36. Water distiller Machine No. 2
Specifications
 Model……............................…..DZ-20L II
 Voltage(V)…..........................….220
 Output(L/H)………......................20
 Heating Power(KW)…………….13
37. Double distilled water No 1
38. Water bath (different size and types) No 2
Specifications (different
 Model………….HHW21.600A capacity-
the
 Capacity………27lit minimum
 Voltage…………..220V50Hz capacity
 Power (W)……….. 750+/-10% is 27 lit)
 Tem-motion (oC)…………. 1
 Tem-range (oC)…………….. 37-65oC
39. Quickspin No. 2
Specifications
 MAXIMUM SPEED 6000RPM
 MAXIMUM G FORCE 2,000 X G
 CAPACITY 6 X 1.5/2.0 ML
2 X 0.2ML STRIPS
 DIMENSIONS (W X D X H) 15 X 15 X 11.7 CM
 WEIGHT 0.45 KG
40. Digital balance PGW 753 No. 3
Specifications
 Model……………..PGW 753 2i
 Capacity…………..750g
 Readability………..0.001g
 Repeatability……...0.001g
 Linearity+/-………..0.002g
 Pan size……………140mm x 140mm
41. PH Meter No. 2
i. Digital PH Meter, Bench Top Type
Specifications
• model: CP-505 de
• Powered with 12V power adapter.
• Equipped with a large, easy-to-read backlight LCD display with brightness control.
• Calibration: 1÷5 points.
• Automatic buffers detection
• Automatic correction of the temperature influence on sample solution (NIST) value.
• Memory of 3 electrodes’ characteristics
• Automatic or manual temperature compensation.
• Automatic evaluation of the condition of electrode’s membrane.
• Internal clock with date.
• Internal data logger for up to 950 sets of results collected in series or singly with
temperature, time and date.
• USB output.
• The meter meets the GLP requirement
pH mV °C
 Range -2.000 ¸ 16.000 pH ±1999.9mV -50.0 ¸ 199.9 °C
 Resolution 0.001 pH or 0.01 pH 0.1mV 0.1 °C
 Accuracy* (± 1 digit) ±0.002 pH ±0.1 mV ±0.1 °C*
 Input impedance 1012W
 Compensation range -5 ¸ 110.0 °C
 Dimens. (mm) / Weight L=200, W=180, H=20/50 / 660 g
42. ii. PH meter CP-411 No. 2
Digital PH-METER , Portable
Specifications
• Range…………0-14 pH
• Resolution…….0.01pH
• Accuracy (+/- 1 digit)…..+/-0.01pH
• Temp.compensation…….-5-110oc
• Temp.measurement range…….-50-199.9oc
• Temperature sensor………….pt-1000B
• Temperature accuracy (+/- 1 digit)………..+/-0.2oc
• Work time on 1 battery…………..700h
• Dimension (mm)…………L=149, W=82, H=22
43. Heaters and stirrers No. 2
Specifications
 SPEED RANGE: 60-1500 RPM (STIRRING UNITS ONLY)
 (THEEMATP.I NRGAUNNGIET:S ONLY) AMBIENT +5° TO 380°C
 PLATFORM: 19 X 19CM
 CONTROL: QUICK ADJUSTMENT KNOBS
 DIMENSIONS: 20(W) X 23(D) X 11.5(H) CM
 ELECTRICAL DATA: 120V, 60 HZ / 230V, 50/60 HZ
44. Vortex No. 6
Specifications
  SPEED RANGE 115V 0 - 3400 RPM
230V 0 - 2850 RPM
 OPERATING MODES TOUCH OR CONTINUOUS
 AMBIENT OPERATING RANGE 4 - 65°C
 DIMENSIONS (WXDXH) 14CM X 16CM X 13CM
 WEIGHT 2.2KG
 ELECTRICAL 115V OR 230V, 50/60HZ

45. MiniMix 3D shaker No. 5

Specifications
 SPEED 18RPM (115V) / 20 RPM (230V)
 MOTION 3-D, NUTATING
 TILT ANGLE 5°
 PLATFORM SIZE (WXD) 20X16.5CM
 AMBIENT OPERATING RANGE 4-65°
 DIMENSION (WXDXH) 20.3X17.8X10.5CM
 WEIGHT 0.88KG
 ELECTRICAL 115/230V 50/60HZ
46. Cube dry baths No. 1 each
Specifications
SINGLE BLOCK
 TCDB-01 The Cube Dry Bath Incubator (one block unit); without block 220V
DUAL BLOCK
 TCDB-02 The Cube Dry Bath Incubator (dual block unit); without block 220V
Accessories
 MD-MP01-S Block for Microplate; Titerplate Plain Block for Single Block Unit Only
 MD-MP02-S Block for 96 wells deep Microplate or PCR plate for Single Block Unit Only
 MD-MP01-D Block for Microplate; Titerplate Plain Block for Dual Block Unit Only
 MD-MP02-D Block for 96 wells deep Microplate or PCR plate for Dual Block Unit Only
 MD-B0.5/1.5 Double side block: one side for 1.5 or 2.0 ml tube, 20 wells; Opposite side for 0.5
ml tube, 30 wells
 MD-B0.5PLUS1.5 Combination block : for 0.5 ml tube, 12 wells and for 1.5 or 2.0 ml tube, 12
wells (on the same side)
47. Extreme temperature dry bath No. 1
Specifications
Dry Bath
 MC-01N Extreme Temperature Dry Bath Incubator; without block 110/220V
 MC-01S Superior Temperature Dry Bath Incubator; without block 110/220V
Accessories
 MC-MP01 For Microplate; Titerplate (Plane bottom)
 MC-MP02 For 96 wells Deep Microplate; PCR Plate or 0.2 ml PCR Strip Tube
 MC-B0.5 For 0.5 ml tube, 30 wells
 MC-B1.5 Well size: 10 mm, For 1.5 or 2.0 ml tube, 30 wells
48. Drying oven No. 2
Specifications
 Model …………...202-3AB
 Voltage…………… 220V50Hz
 Temperature range ……20-250oc
 Temperature motion ………….±1oc
 Size of working room (mm)…………. 750×600×500
 Overall dimension of product (mm)……….965×706×1065
 Heating Power (KW)…………..4
 Shelf load (Kg)…………..15
 Didital -programable
49. Stirring water baths No. 1
Specifications
- SWB-10L-1 Stirring Water Bath 10L with 1 built-in stirrer
- SWB-10L-2 Stirring Water Bath 10L with 2 built-in stirrers
- SWB-20L-1 Stirring Water Bath 20L with 1 built-in stirrer
- SWB-20L-3 Stirring Water Bath 20L with 3 built-in stirrers
ACCESSORIES
- SWB-LID10 Transparent lid for 10L stirring water bath
- SWB-LID20 Transparent lid for 20L stirring water bath
50. Rocker and shaker No 1
Specifications
 Cat. No. MS-NOR MS-NRC MS-NRK MW-23
 Motion Orbital Reciprocal Rocking 3-D Combi
 Stroke Length 20mm 20mm 12° 20mm
 Operation Mode Orbital: 0.1 ~ 10.0 Reciprocal:1~10 Orbital and
circular; 0.1 for 2.0 ~ 20 mm; Rocking combined
circular increment 1 scale increment
 Speed 0~200 rpm 5~100 rpm 5~100 rpm 5~100 rpm
 Timer 0~9999m, ins, 0~9999m, ins, 0~9999m, ins, 0~9999m,
ins,
1 min increment 1 min increment 1 min increment 1 min increment
  Controller Digital microprocessor Digital microprocessor Digital microprocessor Digitalmp
controller controller controller controller
 Display 4 digital red LED 4 digital red LED 4 digital red LED 4 digital red LED
 Operating To 4~40°C 4~40°C 4~40°C 0~50°C
 Carry Capacity 15 kg 15 kg 15 kg 15 kg
 Adjustable Platform Yes Yes Yes Yes
 Special Functions 2 way direction Angle 0-25°
 Platform Dimension W260xL260mm W260xL260mm W260xL260mm W330xL330mm
 Operating Power 110 / 220V 110 / 220V 110 / 220V 110 / 220V
 Weight 8 kg 8 kg 8 kg 8 kg 10 kg
51. No 1
UVT-S-AR,Big DNA/RNA UV-cleaner box ,PCR-workstation
Specification
 UV lamp 2 x30w ,bactecidal (philips)
 Radiation type ultravoilet (253,7nm),ozone free
 Uv-recirculator 1 x 30 w(efficiency > 99 % per cycle )
 Day light lamp 1 xTLD-30w for illumination of the working area
 Glass type Euroglass
 Thickness of glass
Sedes 4mm
Upper front panel 8mm
 Uv-protection film type 4MIL clear
 Optical transmission 95%
 Uv protection 96%
 LED time controller of UV-exposure 0-24hrs
 Working place 1200 x 520mm
52. ES-20, Orbital shaker- Incubator No 1

Specification
 10 mm orbit
 Electronic speed control with soft start
 Speed range: 50-250RPM
 Digital timer: 1-999min
 Temeperature range :25-42oc
 Temperature stability: 0.1oc
 Maximum load capacity :2.5kg
 Plexiglass chamber (7mmtick wall)
53. S210KE REFRIGERATOR No. 2
Specifications
 Total Capacity (litres)……………224
 Refrigerator (litres)…………177
 Freezer (litres)……………….47
 Max ambient temperature………….+43ºC
 Cooling performance, at max ambient temperature:
 refridgerator compartment…………………0- +6º
 freezer compartment ………………………..-10°C
Input/Consumption
 Standard voltage, 50/60 hz (vac)(vdc)…………230
 Optional vac…………………………...240 or 120
 Max input (watt)………………………325
 Electric consumption/24 hrs (kw)…..3.9
 Kerosene tank volume (litres)……….10
 Kerosene consumption/24 hrs (litres)………….0.9
Dimensions
 Height over all (mm)……………………….1790
 Width over all (mm)………………………..592
 Depth over all (mm)……………………….690
 Net weight (kg)…………………………….86
Accessories
 Shelves……………………..4
 Ice cube trays……………….2
 Door racks………………….4
 Bottle racks………………….1
 Salad bins……………………2
54. Deep Freezer (-20 oc) No. 3
55. Deep freezer (-80oc) No. 3
56. Deep freezer (-15oc) No. 2
57. Lyophelizer or freez dryer No . 2
58. Pipettor No. 10
Single channel Pipettors
i. Fixed volume pipettors
o Volume: 10µl, 100 µl, 200 µl, 500 µl, 1000 µl, 5000 µl
o Accuracy: +0.3%
 o Reproducibility: +0.2%
ii. Adjustable-volume pipetors
o Volume: 0.5 – 10 µl; increments: 0.1 µl; accuracy: +2.5%; reproducibility: 1.33%
o Volume: 5 – 50 µl; increments:1.0 µl; accuracy: +1.3%; reproducibility: 0.7%
o Volume: 20 – 100 µl; increments: 1.0 µl; accuracy: +1.1%; reproducibility: 0.7%
o Volume: 200 - 1000 µl; increment: 10.0 µl; accuracy: +0.8%; reproducibility: 0.2%
o Volume: 1 – 5 ml; increment: 100.0 µl; accuracy: 0.82%; reproducibility: 0.2%
59. Digital single channel Pipettes No. 10 each
- Capacity: 10µl, 100µl, 1000µl
60. Multi channel pipettors No. 10 each
- Capacity: 10µl, 100µl, 1000µl
61. Pepite tipes (yellow, blue,white) (capacity:0.5 µl ,10µl,20 µl ,5 µl ,50 µl , 100µl, 1000µl) pack 10 each
62. Measuring (Mhr) pipette, glass No. 12
Specifications
- Capacity(ml): 2, 5, 10, 25
- Graduation(ml): 0.1
- Accuracy(ml): +0.02, +0.04, +0.06, +0.08
63. Volumetric pipettes, Glass No. 12
Specifications
- Capacity(ml): 0.5, 1, 5, 10, 15, 25, 50, 100, 200
- Color code: all color types
- Class: class A pipettes
- Accuracy(ml): +0.01, +0.02, +0.05, +0.08, +0.10
- Minimum flow time(seconds): 5, 10, 25, 30
64. Various pipetors No. 10 each
Specifications
i. Fixed volume pipettors
- Volume: 100 µl, 200 µl, 500 µl, 1000 µl, 5000 µl
- Accuracy: +0.3%
- Reproducibility: +0.2%
ii. Adjustable-volume pipetors
 Volume: 0.5 – 10 µl; increments: 0.1 µl; accuracy: +2.5%; reproducibility: 1.33%
 Volume: 5 – 50 µl; increments:1.0 µl; accuracy: +1.3%; reproducibility: 0.7%
 Volume: 20 – 100 µl; increments: 1.0 µl; accuracy: +1.1%; reproducibility: 0.7%
 Volume: 200 - 1000 µl; increment: 10.0 µl; accuracy: +0.8%; reproducibility: 0.2%
 Volume: 1 – 5 ml; increment: 100.0 µl; accuracy: 0.82%; reproducibility: 0.2%
65. Epppendorf Adjustable- volume pipettes pack 10
Specifications
 Volume: 1.5–2.5 µl; increments: 0.002µl; accuracy: +12–1.4%; reproducibility: <6.0–0.7%
66. Pipettes Pack 10 each
 (0.5-10µl, 5-100 µl, 50-1000 µl) both uni and multi-chanelled
67. Measuring Cylinders Pack 10
Specifications
 Glass body graduated with polypropylene stopper
 Capacity of 5ml – 2000ml, pack of 2pcs
68. Flasks Pack 5
Specifications
 Conical flask
- Borosilicate Glass. Narrow mouth, graduated. Having capacity from 100ml – 1L, pack
of 6pcs
69. Volumetric flask Pack 5
Glass. Class B with interchangeable, Polypropylene stoppers to BS 1792. Having the capacity of
15ml
70. Volumetric flask Pack 5
Glass. Class B with interchangeable, Polypropylene stoppers to BS 1792. Having the capacity of
25ml
71. Volumetric flask Pack 5
Glass. Class B with interchangeable, Polypropylene stoppers to BS 1792. Having the capacity of
50ml
72. Volumetric flask Pack 5
Glass. Class B with interchangeable, Polypropylene stoppers to BS 1792. Having the capacity of
100ml
73. Volumetric flask Pack 5
Glass. Class B with interchangeable, Polypropylene stoppers to BS 1792. Having the capacity of
1000ml
74. Flask Pack 10
- Conical, Borosilicate Glass. Narrow mouth, graduated. Having capacity from 100ml –
1L, pack of 6pcs
75. Flask Pack 10
- VOLUMETRIC, Glass. Class B with interchangeable, Polypropylene stoppers to BS
1792
- Capacity: 5ml – 5L, pack of two pcs
76. Funnels Pack 5
 With long stem and fluted internally for rapid filtration. Top diameter 75mm.
77. Plastic Cassettes Pack 5
78. Petri dishes Pack 100
 Resistance glass with capacity of 60 X 12mm – 120 X 20MM, Pack of 18pcs
79. Beakers
Specifications
Beaker, glass 100ml Pack 5
- Beakers with spout, borosilicate glass, heat and chemical resistance glass, UK made, As
per DIN 12331, ISO 3819
80. Beaker, glass 600ml Pack 5
- Beakers with spout, borosilicate glass, heat and chemical resistance glass, UK made, As
per DIN 12331, ISO 3819
81. Beaker, glass 50ml Pack 5
- Beakers with spout, borosilicate glass, heat and chemical resistance glass, UK made, As
per DIN 12331, ISO 3819
82. Beaker, glass 250ml Pack 5
- Beakers with spout, borosilicate glass, heat and chemical resistance glass, UK made, As
per DIN 12331, ISO 3819
83. Measuring Cylinders Pack 6
 Glass body graduated with polypropylene stopper. The capacity of 5ml – 2000ml
84. Test tube –pyrix borosilicate glass, heat and chemical resistance glass, capacity of 15ml pack 20
85. Bunsen Burner No. 10
Specifications
• An adjustable baffle in the 13mm o.d burner tube. Over all height 160mm
86. Mortar and pestle No 10

87. Crucibles No 20

88. Spatula Pack 5

- Stainless steel. Length 175mm
89. Clamp: Pack 5
- Three prong, alloy with rubber covered jaws opening to 70mm
90. Spoons: Pack 5
- Plastic (Teaspoons) length 120mm., pack of 20pcs
91. REAGENT BOTTLE, amber glass narrow mouth, with glass stopper, cap: 250- ml Pack 5
92. REAGENT BOTTLE, amber glass narrow mouth, w/glass stopper, cap: 500-ml Pack 5
93. REAGENT BOTTLE, amber glass narrow mouth, w/glass stopper, cap: 1,000-ml Pack 5
94. Funnels: Pack 5
- With long stem and fluted internally for rapid filtration. Top diameter 75mm
95. RNase-Free Water Litre 10
Specifications
 RFW250 RNase-Free Water 250 ml RFW50X5 RNase-Free Water 50x 5ml
96. Membranes, buffers, stains Liter, pack 5,
Specifications: 1 pack
- CSL-TTGP Powdered Towbin Buffer, Tris-Glycine base - 10 pouches/pk (10 litres/pk) each
- CSL-WTB Western 25x Transfer Buffer (50 ml)
- CSL-SDWB Semi-dry Western blot buffer (1000ml)
- CSL-SDWBPVDF Semi-dry Western blot buffer for PVDF (1000ml)
- CSL-PSS Ponceau S staining solution (500ml)
- CSL-PSB Ponceau S staining solution powder – 10 pouches/pk (5 litres/pk)
- CSL-PCMN88 10 x Pre-cut membranes, Nitrocellulose 8 x 8cm
- CSL-PCMP88 10 x Pre-cut membranes, PVDF 8 x 8cm
- CSL-PCMN86 10 x Pre-cut membranes, Nitrocellulose 8 x 6cm
- CSL-PCMP86 10 x Pre-cut membranes, PVDF 8 x 6cm
- CSL-PRMNY88
- CSL-RNC45 Nitrocellulose roll, pore size0.45μm 10x Pre-cut membranes,Nylon8x8cm
- CSL-RNC2 Nitrocellulose roll, pore size 0.20μm
- CSL-PCMNY86
- CSL-RNY45 Nylon roll, pore size 0.45μm 10 x Pre-cut membranes, Nylon 8 x 6cm
- CSL-RNY2 Nylon roll, pore size 0.20μm

SN Item type Quantity

29 Agarose (for making gels) 100 g
33 Sodium dodecyl sulphate 500 g
34 Sodium hydroxide 500 g
35 Sodium chloride 500 g
36 Glycerol 1 liter
42 pH indicating papers (3-10) 5 booklets
48 Ammonium phosphate ?