Scribd
Upload
104 views1 page

Foundation Plan

The document is a foundation plan drawing with details on dimensions, materials, and reinforcement. It includes a grid of columns (C1-C4) and footings (F1-F3) that are 4000mm or 5000mm in length. The rebar will have a minimum clear cover of 30mm for beams and 50mm for columns and footings. Reinforcement will have a lap length of 50 times the bar diameter and consist of Fe500 steel bars. Concrete mix designs are specified as M15 for PCC and M30 for RCC.

Uploaded by

avdesh7777
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views1 page

Foundation Plan

The document is a foundation plan drawing with details on dimensions, materials, and reinforcement. It includes a grid of columns (C1-C4) and footings (F1-F3) that are 4000mm or 5000mm in length. The rebar will have a minimum clear cover of 30mm for beams and 50mm for columns and footings. Reinforcement will have a lap length of 50 times the bar diameter and consist of Fe500 steel bars. Concrete mix designs are specified as M15 for PCC and M30 for RCC.

Uploaded by

avdesh7777
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Rev Description Date

FOUNDATION PLAN
NOTES:
1. Drawing shall not be scaled
4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000
only, figure dimension shall be
C2 C2 C2 C2 C2 C2 C2 C2 C2 C2 C2 followed.
1 2. All the dimensionare in mm
F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2
unless otherwise shown.
3. Concrete mixed shall be.
4000

5000
a). PCC - M15
C1 C1 C4 b). RCC - M30
2 4. Clear cover for main reinfor
F1 F1 F1 C2
3 cement shall be
4000

F2 a). Beam - 30mm


b). Column - 50mm

5000
C3 C3 C4 c). Slab - 30mm
4 d). Footing - 50mm
F3 F3 F1
C2
5). Lap length shall be 50
4000

5 times the bar diameter


F2 6). Steel used shall be HYSD
C3 C3 C4 bars (Fe500)
6

5000
F3 F3 F1
4000

C2
7
C1 C1 C4 F2
8
F1 F1 F1

5000
4000

C2 C2 C2 C2 C2 C2 C2 C2 C2 C2 C2
9
F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2
A B C D E F G H I J K L
All the dimensions are in mm
TITLE
FOUNDATION PLAN
CLIENT
KBC
DRAWN BY CHECKED BY DATE
HK
SCALE (@ A1) PROJECT NUMBER
DRAWING NUMBER REV
KBC/001

You might also like