Register your product and get support at

Enjoy
3 www.philips.com/welcome
HTS8140
HTS8150
EasyLink control One touch audio input switching
This unit is able to render the audio signals from the
This feature is only applicable if this DVD Home Theatre active source and switch automatically to the
unit is connected to HDMI CEC compliant TV/device corresponding audio input.
using HDMI cable. It enables all the linked devices
Before you can enjoy this feature, connect audio cables
response or react to certain commands simultaneously
from this unit to your TV/devices and follow the
with one touch control.
instructions below to map the audio inputs to the
connected devices.
Satellite Receiver /
A
HDMI CEC
TV
HDMI
Cable Box

HDD / DVD Recorder

B
C
Press DISC.
Press OPTIONS.
Press B.
1 Connect

subwoofer
AUDIO
D Select [ EasyLink ], then press B.

General Setup
2 Set up
HDMI AUDIO
EasyLink
Disc Lock
Display Dim
Auto Wake-up TV
System Standby
System Audio Control
3 Enjoy
OSD Language Audio Input Mapping

A Turn on the HDMI CEC operations on your TV and

other connected devices. See TVs/devices manual for
Screen Saver
Sleep Timer
Standby Mode
DivX(R) VOD Code
Quick Start Guide
details. E Select [ System Audio Control ] > [ On ], then
press OK.
B You can now enjoy the EasyLink controls.
F Select [ Audio Input Mapping ], then press OK. What’s in the box? User
One touch play [ Auto Wake-up TV ] G Select [ OK ] in the menu, then press OK to start Manual
scanning of devices.
A Press PLAY.
It turns on this unit and start disc play (if a video disc H When scanning complete, select the audio input of
is detected), and your TV automatically turns on and this unit that is used to connect to your TV/device
switches to the correct viewing channel. (e.g. AUX1 Input), then press B.
I Select the TV/device (appeared in its brand name)
Note This is only possible if this unit is in standby in the right panel, then press OK.
mode. If this unit is in active mode, you have to press
DISC followed by PLAY to start disc play. J Repeat steps 8~9 to map other connected devices. DVD Home Theatre (SoundBar) Remote Control Micro fibre Docking
K To exit the menu, press OPTIONS. and 2 batteries cleaning cloth station

One touch power off [ System Standby ] Note Philips does not guarantee 100%
interoperability with all HDMI CEC compliant devices.
A Press and hold 2.
It turns off all linked devices.

Note This unit responses to standby command from

other HDMI CEC compliant TV/devices.

Subwoofer Power cable Scart cable Composite HDMI cable Wall mount bracket
Video cable and 2 knobs

Need help?
User Manual
See the user manual that came with your Philips DVD Home Theater System. 2008 C Koninklijke Philips N.V.
All rights reserved. 3.5mm stereo audio cable
12nc: 3139 245 30071 (for MP3 LINK)
sgpjp_817/12-eng1
 Connect Set up
1 2
A Placement C Connect to TV E Connect audio output from TV (for A Find the viewing channel
Proper speakers system placement is important to EasyLink control) A Press 2 to turn on this DVD Home Theatre unit.
ensure optimum sound performance. DVD Home Theatre unit (rear)
To hear the TV audio through this DVD Home Theatre B Turn on the TV. Use the TVs remote control to
unit, connect an audio cable (not supplied) from the select the correct viewing channel.
TV AUDIO IN-AUX1 sockets to the AUDIO OUT
SCART OUT sockets on your TV. Note To search for the correct viewing channel,
HDMI OUT (AUX-SCART)
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, ° button) until
you see the Video In channel.
Or

TV AUDIO IN
R
B Start Ambisound setup
HDMI IN SCART
(AUX1) When you turn on this DVD Home Theatre unit
(SoundBar) for the first time, follow the instructions on
the TV to complete the setup.
A Place the DVD Home Theatre unit (SoundBar) at the z If your TV supports HDMI, connect the HDMI cable OSD Language
normal listening ear-level, or at least above the knee- from the HDMI OUT socket to the HDMI IN socket Please choose your language:
level. Face it straight ahead towards the listening on your TV. Or; English
Dansk
area. Deutsch

z Connect a scart cable from the SCART socket to Note To listen to the audio output from this Español
B Place the subwoofer on the floor, at least one metre connection, press AUX/DI /MP3 LINK repeatedly
Français
Italiano
away from the TV. the SCART IN socket on your TV.
until ‘AUX1 INPUT’ is displayed on the display panel.
Stop: Exit Change Select

Note HDMI connection does not support audio

output from your TV to this unit, a separate audio A Select a language for on-screen display, then press
connection is required. B.
B Prepare for rear connections F Connect subwoofer and power
B [ Welcome ] message is displayed, press B to
cable continue.
C [ Orientation ] message is displayed, press B to
D Connect docking station Subwoofer (rear) continue.
D Select a most suitable predefined setting according
to your room environment and setup, press B to
confirm and go to the next setup screen.
DOCK B [ Room Acoustics ]
Select the type of walls that surround your room.
LOUDSPEAKERS
A The default setting is [ Hard (concrete, wood) ].
[ Room Placement ]
Select the SoundBar placement position in your
TO SUBWOOFER room. The default setting is [ Middle of room ].
[ Height ]
A Pull up the catch to remove the rear cover. Select the height at which the SoundBar is placed.
The default setting is between 0.8~1.2 metres.
B Connect the required cables (see the following A Connect the iPod docking station to DOCK socket.
sections for details) and direct all the cables to the [ Listening Position ]
CABLE OUT point. B Connect the composite video cable to the VIDEO Select the distance between the listening position and
A Unwind the cables from TO MAIN UNIT on the
IN socket on your TV. the SoundBar. The default setting is between 2~3
subwoofer, then connect the grey end cable to TO
Note All the cables must be placed properly inside metres.
Note To adjust the dock ‘support’ to fit your iPod,
SUBWOOFER socket and white end cable to
the rear panel in order for the rear cover to close.
LOUDSPEAKERS socket on this DVD Home
you have to loosen the knob at the bottom of the unit. E When [ Complete ] screen is displayed, press B to
To listen to the audio output from this connection, Theatre unit.
exit.
press DOCK. B Connect the power cable from subwoofer to the AC
power outlet. Note Refer to the accompanying user manual
for other setup options.