2 SC 3212

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

isc Silicon NPN Power Transistor 2SC3212

DESCRIPTION ·
·Collector-Emiiter Sustaining Voltage-
: VCEO(SUS)= 500V(Min.)
·Low Collector Saturation Voltage
: VCE(sat)= 1.0V(Max.)@ IC= 5A
·High Speed Switching
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation

APPLICATIONS
·Designed for high speed switching applications.

ABSOLUTE MAXIMUM RATINGS (Ta=25℃)

SYMBOL PARAMETER VALUE UNIT

VCBO Collector-Base Voltage 800 V

VCEO Collector-Emitter Voltage 500 V

VEBO Emitter-Base Voltage 8 V

IC Collector Current-Continuous 7 A

ICM Collector Current-Peak 15 A

IB Base Current-Continuous 4 A

Collector Power Dissipation


3
@Ta=25℃
PC W
Collector Power Dissipation
100
@TC=25℃

Tj Junction Temperature 150 ℃

Tstg Storage Temperature Range -55~150 ℃

isc website:www.iscsemi.com 1 isc & iscsemi is registered trademark


isc Silicon NPN Power Transistor 2SC3212

ELECTRICAL CHARACTERISTICS
TC=25℃ unless otherwise specified

SYMBOL PARAMETER CONDITIONS MIN TYP. MAX UNIT

VCEO(SUS) Collector-Emitter Sustaining Voltage IC= 30mA; IB=0 500 V

VCE(sat) Collector-Emitter Saturation Voltage IC= 5A; IB= 1A 1.0 V

VBE(sat) Base-Emitter Saturation Voltage IC= 5A; IB= 1A 1.5 V

ICBO Collector Cutoff Current VCB= 800V; IE= 0 0.1 mA

IEBO Emitter Cutoff Current VEB= 5V; IC= 0 0.1 mA

hFE-1 DC Current Gain IC= 0.1A; VCE= 5V 15

hFE-2 DC Current Gain IC= 5A; VCE= 5V 8

fT Current-Gain—Bandwidth Product IC= 0.5A; VCE= 10V 3.5 MHz

Switching Times; Resistive Load

ton Turn-on Time 1.0 μs

IC= 5A; IB1= -IB2= 1A;


ts Storage Time 2.5 μs
VCC= 200V

tf Fall Time 1.0 μs

Notice:
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.

isc website:www.iscsemi.com 2 isc & iscsemi is registered trademark

You might also like