The document provides instructions for updating the navigation system and mapping on a vehicle touchscreen system using a USB stick. It details the steps to transfer the updates into the vehicle, including keeping the engine running for ICE/PHEV vehicles or having the vehicle ready with doors closed and seatbelt on for EVs. The process involves inserting the USB stick, following on-screen dialogs, and updating either just the navigation system, just the mapping, or both. Potential error messages are addressed. The entire update may take several tens of minutes and the user should not remove the USB stick or turn off the engine until complete.
The document provides instructions for updating the navigation system and mapping on a vehicle touchscreen system using a USB stick. It details the steps to transfer the updates into the vehicle, including keeping the engine running for ICE/PHEV vehicles or having the vehicle ready with doors closed and seatbelt on for EVs. The process involves inserting the USB stick, following on-screen dialogs, and updating either just the navigation system, just the mapping, or both. Potential error messages are addressed. The entire update may take several tens of minutes and the user should not remove the USB stick or turn off the engine until complete.
The document provides instructions for updating the navigation system and mapping on a vehicle touchscreen system using a USB stick. It details the steps to transfer the updates into the vehicle, including keeping the engine running for ICE/PHEV vehicles or having the vehicle ready with doors closed and seatbelt on for EVs. The process involves inserting the USB stick, following on-screen dialogs, and updating either just the navigation system, just the mapping, or both. Potential error messages are addressed. The entire update may take several tens of minutes and the user should not remove the USB stick or turn off the engine until complete.
The document provides instructions for updating the navigation system and mapping on a vehicle touchscreen system using a USB stick. It details the steps to transfer the updates into the vehicle, including keeping the engine running for ICE/PHEV vehicles or having the vehicle ready with doors closed and seatbelt on for EVs. The process involves inserting the USB stick, following on-screen dialogs, and updating either just the navigation system, just the mapping, or both. Potential error messages are addressed. The entire update may take several tens of minutes and the user should not remove the USB stick or turn off the engine until complete.
The application allows to updating the navigation system and the mapping. This application prepares the USB stick that you will need to use in your vehicle.
1) Transfer the updates into the vehicle :
The updating of the map may range several tens of minutes.
Caution :
For an ICE vehicle (fuel/diesel) or Plugin Hybride (PHEV) :) :
- It is essential to keep the engine running while the updates are being installed - It is recommended not to drive while the updates are being installed. Park your car in the open air rather than a confined area (i.e garage) - However, it is possible to drive while the updates
For an electric vehicle (BEV) :
- It is essential to have vehicle ‘Ready’ (Indicator light ‘Ready’on the dashboard), to stay with door closed, to stay in the driver’s seat with the seatbelt on, while the update are being installed - it is possible to drive while the updates - It is not possible to charge battery while the update are being installed
- /!\ The GPS function will not be available during the update. - /!\ Do not remove the USB sticj from the car before the update process is complete. /!\ Do not turn off your engine before the update process is complete.
Caution :
- Before starting the update process, set the air conditioning at your convenience, it will be functional but no adjustment will be possible during the operation (only the defogging function remains accessible via the buttons on the console).
- We also advise you not to activate the heated seats.
- Parking aids are also unavailable, so be careful when manoeuvring.
……………………………………………………………………………………………..
PROCESS TO TRANSFER INTO THE VEHICLE
Insert the key into the USB port of the vehicle.
Follow the dialogue on the touch screen.
If you need to update:
- Only the navigation system , go to step 5.1
- Only the mapping, go to step 5.2
- Navigation system and mapping, got to step 5.1. The update begin from navigation system to mapping. We recommend you to make all in the same time: the complete update of your touch screen and right after the update of your mapping.
…………………………………………………………………………………………………
5.1 Updating the touchscreen navigation system
This message can appear on the screen « No media content on the USB memory stick ». Ignore this message and don’t remove the USB stick. This message will disappear in 10 seconds. Then, follow the instructions on the screen.
The number depends on the version of soft.
2
A few second after the step 3, the screen will be black for a moment, before going to step 4.
Update successful. For vehicle concern by updating of the navigation system only, remove the USB stick. System will restart
Nota : If you don’t remove the USB stick, you can do this without taking account the message witch propose an updating.
For vehicle concern by updating of the mapping, the process will continue automatically. If not, don’t hesitate to remove the USB stick and insert it again.
Procedure in case of error message
If the update is not fully completed, the following message appears « FIRMWARE UPDATE FAILED DUE TO A CORRUPTED FILE »
Remove USB stick.
The screen restarts with the following message « SOFTWARE LOADING ON DEMAND… »
Reinsert the USB stick. If the update does not initiate, start the entire procedure again with a new USB stick. 3
If the following message appears « Version not compatible with the hardware », the files on the stick or the formatting of the stick itself are incorrect.
Start the entire procedure again with a new USB stick.
According to vehicle technical configuration, it will be possible or not to select countries that you need. This is allows to reduce the time to update mapping. Procedure in case of error message
According to vehicle technical configuration, it may occur that the update stops during the process indicating the error message “ Update Error” and resulting in a black screen instead of the Map view in the navigation screen . If this happens, please remove the USB stick and replug it again.
This will restart the installation and the problem should be solved.
6 You can now remove the USB stick. If you haven’t remove it, the following screen appear. You can still remove the USB stick.
