Scribd
Upload
29 views

Transformers Reference Guide

Transformers are passive components that transfer electrical energy between circuits by electromagnetic induction. They consist of coils wound around a metal core. Transformers obey Faraday's law of induction and their performance is affected by factors like core losses, winding losses, parasitic capacitance, and turns ratio determining voltage transformation. Real-world transformers have equivalent circuits accounting for these factors.

Uploaded by

Arno
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
29 views

Transformers Reference Guide

Transformers are passive components that transfer electrical energy between circuits by electromagnetic induction. They consist of coils wound around a metal core. Transformers obey Faraday's law of induction and their performance is affected by factors like core losses, winding losses, parasitic capacitance, and turns ratio determining voltage transformation. Real-world transformers have equivalent circuits accounting for these factors.

Uploaded by

Arno
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

mouser.

com

Transformers Reference Guide

Transformers
IP NP : NS IS
A transformer consists basically of coil windings made of - Are passive components
conductive material, surrounding a metal core. A varying
current in any one coil of the transformer produces a varying
- Transfer electrical energy between + +
magnetic flux in the transformer’s core, which induces a electrical circuits (coils)
VP VS ZL
varying electromotive force across other coils. Electrical - Obey Faraday’s law of induction
energy can be transferred between separate coils without a
conductive connection between the two circuits.
- -

Key
NP : Number of windings on primary coil VS : Instantaneous Voltage on secondary coil ZL : Load impedance
NS : Number of windings on secondary coil IP : Current on primary coil : Magnetic Flux through one turn
VP : Instantaneous Voltage on primary IS : Current on secondary coil of the winding
coil (source) L : Winding self-inductance

Ideal transformer Taking these real-world issues into account, the equivalent circuit looks like this:

IP 2 2 IS
Primary winding
Secondary winding
RP XP RS XS NP : NS
NP turns NS turns
Magnetic
flux Secondary current

IM
Primary current

IP IS Ic
Primary voltage Secondary voltage
VP EP ES VS
VP VS Rc XM

Transformer
core
Winding joule losses and leakage reactances are approximated by loop impedances RP, RS and XP, XS.
Core losses: RC and XM (magnetizing reactance).

Equations Real-world transformers have to deal with :


Core Losses: Parasitic Capacitance:
Ideal
Vtransformer
P
= -N
P - Nonlinear magnetic effects in the core cause - Capacitance between adjacent winding layers
dt
Hysteresis Losses - Capacitance between adjacent turns in one
VS = - NS dt - Heating of the core causes Eddy Current winding layer
VP NP IS Losses
Turns ratio a = = = = LP - Capacitance between Core and adjacent
VS NS IP LS Winding Losses: winding layers
a>1 : Step-down transformer - Resistance and inductance in the winding
a<1 : Step-up transformer material cause Joule Losses
a=1 : Isolation transformer - Reactive impedance is caused by leakage flux

Core Constructions
When windings surround the core, the transformer is core form; when windings are surrounded by the core, the transformer is shell form.

Core form Shell form


Solid Core - Circuits like switch-mode power supplies that operate Air Core - Used in RF applications, air core transformers are constructed by
above mains frequencies and up to a few tens of kilohertz use powdered placing the windings very close to each other. This design eliminates core
iron cores. For higher frequencies, cores made from non-conductive losses.
magnetic ceramic materials called ferrites are common. Laminated Core - Transformers for use at power or audio frequencies typically
Toroidal Core - Toroidal transformers are constructed around a have cores made of high permeability silicon steel. The effect of laminations is
ring-shaped core, made from a long strip of silicon steel or permalloy an enormous reduction of eddy currents.
wound into a coil, powdered iron, or ferrite.

Transformers protection

You might also like