Havells Enviro GTi

Web Monitoring Manual

CLASSIFICATION | PUBLIC
 Website

• For Customer – Wi-Fi

“pvcheck.havells.com”

CLASSIFICATION | PUBLIC
 GRID TIE STRING INVERTERS (GTI)

• Introducing a new range of Residential Havells Inverter

• State of the art string base inverter
• Single Phase Residential Inverters - 1.1 kW to 5kW /
Single and Dual MPPT
• Three Phase Residential & Small Commercial Inverters
– 5.5 kW to 11kW
• Three Phase Commercial Inverters – 15 kW to 70 kW
• 7 years standard warranty
• Equipped with standard WIFI communication
• Inverters are equipped with 25 year data storage
capability
• Real time MPPT for maximum generation
• Wide input voltage range

CLASSIFICATION | PUBLIC
 Enviro GTi Product Range

Sr. No. Model Description Application

Single Phase Inverter, Single
1. Enviro GTi 1kW – 3 kW Single Phase for Residential Building
MPPT, Wi-Fi Standard
Single Phase Inverter,
Dual MPPT,
2. Enviro GTi 3 kW – 6 kW
G-2 Model ,
Three phase for industrial/commercial
Wi-Fi Standard
building
3. Enviro GTi 4 kW – 12 kW
4. Enviro GTi 15 kW Three Phase Inverter,
Dual MPPT,
5. Enviro GTi 20 kW – 33 kW
DC Switch Standard,
Three phase for commercial projects
Wi-Fi Standard
6. Enviro GTi 50 kW – 70 kW

CLASSIFICATION | PUBLIC
 Enviro GTi Product Range

Enviro GTi 1100 , 2200, 3000 Enviro GTi 4000D , 5000D, Enviro GTi 5500TX , 6600TX, 8800TX,
Single Phase 6000D 11000TX
Single Phase Three Phase

CLASSIFICATION | PUBLIC
 Enviro GTi Product Range

Enviro GTi 15000T Enviro GTi 20000TD, 25000TD, Enviro GTi 50KT, 60KT, 70KT
Three Phase 30000TD, 33000TD Three Phase
Three Phase

CLASSIFICATION | PUBLIC
 Enviro GTi Product Range

Model/ MPPT Build-in Build-in

Sr. No. String No. DC Switch Communication
Configure N0. DC SPD AC SPD

Enviro GTi 1kW – 3 kW

1 1 Optional None None
1. Single Phase On board WIFI,485
Enviro GTi 3 kW – 6 kW
2 2 Optional None None
2. Single Phase External WIFI,485
Enviro GTi 4 kW – 12 kW External
2 2 Standard None None
3. Three Phase WIFI/GPRS,485
Enviro GTi 15 kW External
2 4 Standard Optional Optional
4. Three Phase WIFI/GPRS,485
Enviro GTi 20 kW – 33 kW External
2 6 (20kW-4) Standard None None
5. Three Phase WIFI/GPRS,485
Enviro GTi 50 kW – 70 kW 12(50kW- Standar External
3 Standard Optional
6. Three Phase 10) d WIFI/GPRS,485

CLASSIFICATION | PUBLIC
 Wi-Fi Configuration
• Prepare a Laptop or device, e. g tablet or
smart Phone that enables Wi-Fi
• Obtain an IP address automatically
• Procedure
Step 1 : click on Wi-Fi
Step 2 : connect with your personal internet
access point or WLAN
Step 3 : Right click on your connected AP click
in status > properties to open the wireless
network property setup window

CLASSIFICATION | PUBLIC
 Wi-Fi Configuration
Step 4 : Double click on internet Protocol Version 4 (TCP/IPv4). Click on General > obtain an IP address
automatically > OK to finish the Setup.

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 1 : Click on Wi-Fi

Step 2 : Connect with Havells

Inverter Wi-Fi Module,
defaulted with no password
and its name started as AP_
and a following 9- digit Wi-Fi
serial number. See Figure

AP_502173653

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 3 : when connected open browser (IE is recommended) , head to http://10/10/100.254/ , and fill in
user name and password which all defaulted as admin for the first time.

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 4 : when successfully logged in, user can find the basic information on their inverter Wi-Fi Module

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 5 : Please Click in Wizard > Start to Start the detailed setup on your inverter Wi-Fi module
Step 6 : Select Wireless connection and click Next

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 7 : Select your personal wireless network. This can be done by refreshing your wireless network or
add it manually.
Step 8 : Please enter your personal wireless network password. Then click next.

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 9 : Select Enable > Next to obtain IP address automatically
Step 10 : Click next.

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 11 : Click OK to wait for setting complete.

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 12 : Setup of wireless network connection priority and connection mode.
Open control panel > network and sharing center> manage wireless networks, set your home routers access point as default to
connect with your personal computer automatically. Make sure it has the highest priority. To the device Wi-Fi module, set its AP as
default to connect with your personal computer manually.
Step 13. :Connect with your personal wireless network or WLAN.

CLASSIFICATION | PUBLIC
 Enviro GTi Wi-Fi Setup
Configuration
Procedure
Step 12 : Setup of wireless network connection priority and connection mode.
Open control panel > network and sharing center> manage wireless networks, set your home routers access point as default to
connect with your personal computer automatically. Make sure it has the highest priority. To the device Wi-Fi module, set its AP as
default to connect with your personal computer manually.
Step 13. :Connect with your personal wireless network or WLAN.

CLASSIFICATION | PUBLIC
 Create Account on portal

• Please kindly enter into

http://pvcheck.havells.com/login.
html website.
• Click on Register now if you do
not have an account.
• Fill in basic registration
information upon request.
• Fill in details to complete the
registration.
• If Registration is successful, then
below page will be display. Click
OK to return to homepage of the
portal.

CLASSIFICATION | PUBLIC
 How to Build a new plant
Step 1 : After Login, Create the Plant by clicking the below screen.

CLASSIFICATION | PUBLIC
 How to Build a new plant
Step 2 : Fill Plant Name , Project type, ON Gird Type & Location.

CLASSIFICATION | PUBLIC
 How to Build a new plant
Step 3: click Satellite and switch to map mode, convenient to describe roof shape.

CLASSIFICATION | PUBLIC
 How to Build a new plant
Step 4 : fill rest details and click on next.

CLASSIFICATION | PUBLIC
 How to Build a new plant
Step 5:

Click “Complete "and system

will lead you a question that
“ do you want to add a new
device now ?”, if you know
the data logger’s SN, we
recommend you click “yes”
and system will lead you to
“Add a New Device” and type
the data logger SN numbers
one by one.

CLASSIFICATION | PUBLIC
 Adding Inverter to plant
Step 1:

Click “device “ at top and

click on inverter to put the
inverter Serial number.

Step 2

Fill the full information of

basic parameters. If window
ask for information. & Save.

CLASSIFICATION | PUBLIC
 Saving & Uploading data

• After finishing adding, plant will

be “under construction”.

• The system is waiting for data

logger to upload data. Please
ensure data logger is powered on
and normal connection between
inverter and data logger.

• Data logger will take time to

upload the data to server , data
will update after 10 minutes.

CLASSIFICATION | PUBLIC