Scribd
Upload
204 views

Wind Load Calculation

This document provides load calculations for the main sand model roof truss of an HQ 33 Corps underground operations room/sand model room project. It includes dead loads, live loads, wind loads, and load combinations. Dead and live loads are calculated based on roof material weights and specified live loads. Wind loads are calculated based on basic wind speed, pressure coefficients for different wind angles of attack, and internal/external pressure coefficients. The roof is modeled as an octagonal hipped roof supported by RCC columns. The document asks for clarification on modeling and analyzing the steel and RCC components separately and applying wind loads to the hipped roof system.

Uploaded by

Siddhesh Bajpai
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
204 views

Wind Load Calculation

This document provides load calculations for the main sand model roof truss of an HQ 33 Corps underground operations room/sand model room project. It includes dead loads, live loads, wind loads, and load combinations. Dead and live loads are calculated based on roof material weights and specified live loads. Wind loads are calculated based on basic wind speed, pressure coefficients for different wind angles of attack, and internal/external pressure coefficients. The roof is modeled as an octagonal hipped roof supported by RCC columns. The document asks for clarification on modeling and analyzing the steel and RCC components separately and applying wind loads to the hipped roof system.

Uploaded by

Siddhesh Bajpai
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

LOAD CALCULATIONS

Job No. : Rev. No. : R0

Project : HQ 33 CORPS UG OPS ROOM/SANDMODEL ROOM Date : 04/03/2018

Client : Designed by : vamsi


Description : LOADS ON THE MAIN SAND MODEL ROOF TRUSS Checked by :
Building Type = 23.60 m
Length (o/o) Width (o/o) =
23.60 m
=
Width module =
Bay spacing = 6.75 m
Clear eave height Max. eave = 4.20 m
height Roof slope (θ) = 4.20 m
= 3.84 ˚
DEAD LOAD (DL)
Wt. of sheet & purline = 15.00 Kg/m²
Dead Load (DL) = 1.01 KN/m

COLLATERAL LOAD
Collateral Load on Rafter = 15.00 Kg/m² Other Collateral Load =
= 0.00 KN/m =

Live load/unit area, roof = 75.00 Kg/m²


Live Load (LL) = 5.06 KN/m
LIVE LOAD (LL)
Basic wind speed (Vb) = 47 m/s
Design wind speed (Vz) = Vbxk1xk2xk3
where,
WIND LOAD (WL)
k1 = probability factor (risk coefficient)
= 1 Terrain Category Class k2 = terrain, height and structure size factor 3 B
= 0.98
k3 = topography factor
= 1
Vz = 46.06 m/s
Design wind pressure (pz) = 0.6xVz²
pz = 1.273 KN/m²
Encloser condition of the building = Open
Internal pressure coeff.(Cpi) =   0.70
PRESURE COEFFICIENTS:~
h/w = 0.18
= h/w<=1/2
l/w = 1.00
= 1<l/w<=3/2
External pressure coeff.(Cpe) : Table 4 Table 5
Wind Angle
(ө)
Coeff. For Wall Coeff. For Roof
Left Right Left Right
0 degree 0.70 -0.25 -0.9350 -0.40
90 degree -0.50 -0.50 -0.80 -0.80
WIND LOAD DIAGRAMS:~
Wind Across the Ridge (With -Ve Cpi) Wind Across the Ridge (With +Ve Cpi)
KN/m
-0.24 -2.02 KN/m
0.30 2.58 KN/m
-1.64 -14.048KN/m
-1.10 -9.45
KN/m
KN/m
KN/m
KN/m
12.03 3.87 0.00 -8.16
1.40 0.45 0.00 -0.95
Wind Parallel to Ridge(With +Ve Cpi)
-1.50 -12.89KN/m
-1.50 -12.89 KN/m
KN/m
KN/m
-10.31 -10.31
-1.20 -1.20
Wind Parallel to Ridge(With -Ve Cpi)
-0.10 -0.86 KN/m
-0.10 -0.86 KN/m
KN/m
KN/m
1.72 0.00
0.20 0.20
Note:
1) Values within the circles are the UDL
2) -Ve value means,load applied away from structure.

DESIGN ASSUMPTIONS AND LOAD COM


CC columns . Roof is octagonal h
ams supported on rigid frame raft
LOAD COMBINATION
                                                                           Dead Load + Seism
                                                                 Dead Load + Live Load +
             Permissible Stresses have been increased by 33.33% f
                                                                  Dead Load + Crane Load
Dead Load + Live Load + Dead Load + Wind Load
Dead Load + Wind Load Perpen
Dead Load + Cran
Dead Load + Live Load + Wind
d Load + Live Load + Wind Load P
S AND LOAD COMBINATIONS
ipped roof with hip rafters providing the required slopes and stability.
orts on top of RCC Columns are one Pinned and one roller supports.
ing and strut purlins in line with end wall columns.
ers and span the bay spacing of the building.

S (CRITICAL)
ic Load
Seismic Load
r design of elements where wind is critical.
+ Wind Load
Collateral Load
Along Frame
dicular to the Frame
e Load
Load Along Frame
erpendicular to the Frame
o
Dear Kundu.
Pl find att the staad file I have been wkg on
My queries.
1. How Do I apply wind loads on the hipped octagonal roof system. The columns are RCC.
2. Is the basic scheme of modeling ok. I m doubtful about the central vertical member @ the Crown. N
/improvement on the one proposed here.
3. Are the jack rafters ok or should I go for mono-sloped trusses as Jack rafters in strad of simple mem
I am trying to take the coeffs as in monosloped roof with variable angle of wind attack from 0 deg to 18
( IS 8002007: Table 6)
4. Is it ok to analyse the whole structure in one go or seperate the steel part and the RCC part. ?
5. I chose members of the roof as double channel face to face making it a box.
6. comment whether pipes have any marked advantage ( I was worried for the fabrication complexities
I await your response.
Luv
Vamsi
'
I I
I I I

7 = horO·JSw,
I lI I I I I

I I I
I

is the lesser.

I I I

r-l--- r---..1- L

.f f--w '

.. j

f
h

---l
NOTE - Area Hand areaL refer to the whole quadrant.
0

RooF WIND ANOLS 6


..
At< O LE

45° so· 135° H


;

Degree H L H L H&L H &L H L H

-_".',
IIOS::

c·-

E"i 0...L .,
• ,..,
'I .- .,
Q C l>

._..".',. ...
"o"."-' li "o"..e,
< <( ..

0·5 - J·O - 0·9 -J·O -o·s -0·9 -J·O -0·5


10 -1·0 - o·s -1·0 -0·8 -J·O -05 -o·8 -J ·O - 0"4

15 -0;9 - 0·5 -J·O -0"7 -1·0 - o·s - 0·6 -J·O -0·3

-o·s -1·0 -0·6 -o·9 l·-o·s - o·s -J·o -0·2

-0·5 -1·0 - 0·6 -o s j -o·s -o·s - o·9 -O·t

30 -o·5 -o·s
1
-1·0 -0"6 - o 8 -o·s -0·1 -o·6 1 o
I
NoTEh is the height to eaves at lower side, I is the greater I
lesser horizontal dimension of a buil d ing.
R
LOC AL Cpe
I Lt Lo He Le
"5 -2"0 -1"5 - 2"0 -2"0
"5 -2·0 - 1"5 -2"0 - 2·o
·g - 1"8 -1"4 -2·0 -2"0
·s -J·S -1·4 -2·0 -2·o
•7 o·9 -0"9 - 2·0 -2·0

·:; -0·5 -o·s -2·0 -2·o


n of a building and w is the
8.00 Kg/m²
0.54 KN/m
ber @ the Crown. N
strad of simple mem
ack from 0 deg to 18

he RCC part. ?

rication complexities

You might also like