Scribd
Upload
216 views4 pages

Wam 860SL

This document provides specifications for the WAM-860S and WSM-360SL agile modulators. The WAM-860S is an RF agile modulator with an output frequency range of 47-860 MHz and adjustable output level of 60dBmV or 50dBmV. The WSM-360SL is a SAW filter modulator with an output frequency range of 45-860 MHz, output level of 60dBmV, and spurious harmonics over 60dB below the video carrier. Both modulators have adjustable audio and video levels and meet FCC requirements.

Uploaded by

Robert
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
216 views4 pages

Wam 860SL

This document provides specifications for the WAM-860S and WSM-360SL agile modulators. The WAM-860S is an RF agile modulator with an output frequency range of 47-860 MHz and adjustable output level of 60dBmV or 50dBmV. The WSM-360SL is a SAW filter modulator with an output frequency range of 45-860 MHz, output level of 60dBmV, and spurious harmonics over 60dB below the video carrier. Both modulators have adjustable audio and video levels and meet FCC requirements.

Uploaded by

Robert
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

WAM-

860S
L
AGILE MODULATOR

Specifications
 RF
Output Frequency Range 47~860 MHz Adjustable

Output Level WAM-860SL 60dBmV Typical

WAM-860N 50dBmV Typical

Output Level Range 15dB, Continuously Adjustable

V/A Carrier Power Ratio -9~-30dB Continuously Adjustable

Spurious Harmonics ≧ 55dB below Video Carrier

Output Impedance 75 Ω

Frequency Accuracy / Stability within ± 5KHz

RF Output Return Loss 22dB

Video Modulation Depth Indicator Set @ 87.5%, Adjustable to 90% Typical

 IF
IF Output Level 28dBmV (Video Carrier)

Video IF Carrier Frequency NTSC : 45.75 MHz

PAL-B : 38.9 MHz

PAL-D : 38 MHz

PAL-I : 38 MHz

Audio IF Carrier Frequency NTSC : 41.25 MHz

PAL-B : 33.4 MHz

PAL-D : 31.5 MHz

PAL-I : 32 MHz
 VIDEO

Input Level Factory Set for 87.5% Modulation

Input Type Composite Video Negative Sync.

Video Frequency Response ±1.5dB

Modulation Range 0~95% Adjustable

Input Impedance 75 Ω
 AUDIO

Input Level 400mVp-p for ± 25KHz Dev.

Audio Frequency NTSC : 4.5 MHz ± 3KHz above Video 

PAL-B: 5.5 MHz ± 3KHz above Video

PAL-D: 6.5 MHz ± 3KHz above Video

Audio Harmonic Distortion 0.5%

Audio Frequency Response ± 0.5dB

Input Impedance Hi-Z

BTSC Stereo / Mono(*) Field Defeatable Audio Pre-emphasis for BTSC

Baseband Inputs

Audio Overmodulation LED Indicator 25KHz ± 2KHz


 GENERAL

Power Requirement 90~260V AC Switching 50 / 60 Hz

Temperature Range 0~50 ℃

Rear Panel Connectors F-Type (Video In, IF Out, IF In and RF Out)

RCA Type (Audio In)

Real size of the unit 482 (W) x 283(D) x 44.5(H) mm,

Measurement 537 (W) x 325 (D) x 85 (H) mm,

Packing 1 Set / Inner Box, Gross weight: 2.73Kgs

5 Sets / Carton / 17 Kgs /

545 (W) x 355 (D) x 458 (H) mm

WSM-
Features Specifications
360SL
SAW FILTER MODULATOR

Features
 Front Panel Control, Easy To Operate
 High Output Level, Low Spurious
 Adjacent Channel Capability
 PLL Synthesized Channel Control
 With SAW Filter for Accurate Side Band Response and High Adjacent Rejection
 Spurious Harmonics 60dB down
 Low Out-Of Band Noise for Multiple Modulator Installation
 Video Modulation And Audio Deviation Level Adjustable
 Overmodulation Indicator
 Sound Carrier Level Adjustable
 Field Defeatable Audio Pre-emphasis for BTSC Stereo / Mono Baseband Inputs
 High VSB Attenuation
 Meets F.C.C Offset and Accuracy Requirement
 Built-in Power Supply for Easy Installation
 19” EIA Rack Mountable

Specifications
RF
Output Frequency Range 45 ~ 860 MHz

NTSC : CH 2~4, 7~13, A-1~A-5, A~XXX, 87~135.

PAL-B/G : CH E2~E12, S1~S41, X~Z+2, 21~69 (UHF).

PAL-D/K : CH DS1~DS56, Z1~Z42, DS13~DS56.

Output Level 60dBmV Typical

Output Level Range 20dB continuously Adjustable

Spurious Harmonics ≧ 60dB below Video Carrier

Video / Audio Carrier Ratio -9 ~ -30dB continuously Adjustable

Frequency Accuracy / ± 5KHz Standard Channels, ± 3KHz

Stability FCC 21006 Offsets

RF Output Return Loss 16dB Min.

  IF
Output Level 28dBmV (Video Carrier)

Video IF Carrier Frequency NTSC : 45.75 MHz

PAL-B/G : 38.9 MHz

PAL-D/K : 38 MHz

Audio IF Carrier Frequency NTSC : 41.25 MHz

PAL-B/G : 33.4 MHz

PAL-D/K : 31.5 MHz

Output Return Loss 16dB

Input Return Loss 12dB

VIDEO
Input Level 1.0Vp-p for 87.5% Mod.

Input Return Loss 18dB

Video S / N Ratio 60dB

Differential Gain 0.2dB for 87.5% Mod.

Differential Phase 1° for 87.5% Mod.

Overmodulation LED Set @ 87.5%, Adjustable to 90% Typical

Indicator

AUDIO
Input Impedance 10K Ω Unbalanced

Input Level 140mVp-p for ± 25KHz Dev.

Audio Frequency NTSC : 4.5MHz ± 1KHz above Video


PAL-B/G: 5.5MHz ± 1KHz above Video

PAL-D/K: 6.5MHz ± 1KHz above Video

Overmodulation LED 25KHz ± 2KHz

Indicator

Pre-emphasis NTSC : 75μs

PAL-B/G: 50μs

PAL-D/K: 50μs

Audio Frequency Response ± 1dB

GENERAL
Power Requirement 220V AC / 50Hz or 110V AC/60Hz

90 ~ 260V AC switching 50/60Hz (optional).

Temperature Range 0~50 ℃

Rear Panel Connectors RCA Type : Audio In


F-Type : Video In , RF Out, IF In, IF Out.
Real Size of the unit 482 (W) x 283 (D) x 44.5 (H) mm
Measurement 537 (W) x 325 (D) x 85 (H) mm

Packing 1 Set / Inner Box, Gross weight: 2.73Kg

5 Sets / Carton / 14.65 Kgs / 545 (W) x 355 (D) x 458 (H) mm

You might also like