Scribd
Upload
51 views2 pages

Acc 025

The DS-K2800 is a series of access controllers that use TCP/IP for uplink communication and Wiegand for downlink communication. The controllers include single, double, and four door models and support functions like card authentication, alarm monitoring, and offline operation. Main features include support for various card types, alarm triggers, online/offline modes, time synchronization, and large card and event storage. Specifications list the technical details and dimensions of each controller model.

Uploaded by

nikos kafaloukos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views2 pages

Acc 025

The DS-K2800 is a series of access controllers that use TCP/IP for uplink communication and Wiegand for downlink communication. The controllers include single, double, and four door models and support functions like card authentication, alarm monitoring, and offline operation. Main features include support for various card types, alarm triggers, online/offline modes, time synchronization, and large card and event storage. Specifications list the technical details and dimensions of each controller model.

Uploaded by

nikos kafaloukos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DS-K2800 Series

Network Access Controller

DS-K2800 is a series of powerful and stable access controller,


using the logical architecture design. The uplink and downlink
adopt TCP/IP and wiegand communicate respectively. Its
signal processed with special encryption and can be run
offline. Anti-tampering function is also supported.

MODEL
DS-K2801 Single-door Access Controller
DS-K2802 Double-door Access Controller
DS-K2804 Four-door Access Controller

MAIN FEATURES

 32-bit high-speed processor doors


 TCP/IP network communication, with  Supports various card types such as normal/
self-adaptive network interface. The disabled/blacklist/patrol/visitor/duress/
communication data is encrypted to ensure super card, etc.
information security  Supports tamper-proof alarm for card reader,
 Supports Wiegand interface for accessing unsecured door alarm, forced entry door
card reader. Wiegand interface supports alarm, alarm for door opening timeout,
W26/ W34 and is seamlessly compatible duress alarm, and alarm for invalid card
with third-party card reader swiping attempts alarm, case in alarm and
 Massive storage with 10, 000 cards restore, insufficient storage alarm for offline
information and 50,000 card swiping records event, network break alarm
 Supports first card function, super card and  The recognition and storage of card number
super password function, online upgrade with maximum 20 digits
function and online remote control of the  Supports online and offline operating mode;
Spec of DS-K2800 Series Network Access Controller www.hikvision.com

 Supports time synchronization via NTP, access controller is powered off


manual or automatic method  Client supports attendance function
 Watchdog for device running status  High/low temperature resistant design(-20°C
detection to + 65°C)
 Data can be permanently saved when the

SPECIFICATION

Model DS-K2801 DS-K2802 DS-K2804


Working Voltage DC 12V

Power Dissipation
≤50W ≤100W ≤100W
(with Load)

Power consumption ≤3.5W (without Load)

Processor 32-bit

RAM 8M

Uplink
Communication TCP/IP
Interface

Downlink
Communication Wiegand (W26/W34)
Interface

Storage Storage for 10, 000 Valid Cards Information and 50, 000 Card Swiping Records

LED Indicator Power Supply Status, Communication Status, Abnormal Status

Built-in Clock Yes

Accessible Card 2 Card Readers 4 Card Readers (Wiegand 4 Card Readers (Wiegand
Reader (Wiegand Interface) Interface) Interface)

Door Sensor × 1, Door Sensor × 2, Door Sensor × 4,


Input Interface Exit Button × 1, Exit Button × 2, Exit Button × 4,
Case Input × 1 Case Input × 2 Case Input × 4

Lock Relay × 1, Alarm Lock Relay × 2, Alarm Lock Relay × 4, Alarm


Output Interface
Relay × 1 Relay × 2 Relay × 4

Working Temperature -20°C to +65°C (-4°F to +149°F)

Working Humidity 10% to 90% (Non-Condensing)

Dimensions (L×W×H) 285mm × 237mm × 69mm (11.22" × 9.33" × 2.72")

You might also like