Scribd
Upload
51 views

Paper On Function Generator

The document summarizes a 2MHz USB function generator. It can generate standard waveforms like sine, square and triangle from 0.01Hz to 2MHz. It stores up to 8192 waveform points and allows custom waveform creation. Additional features include frequency sweeping, noise generation, automated waveform sequencing, and bode plot generation when used with a PC scope. It has a small form factor, crystal-based stability, galvanically isolated USB, and runs on a 9V DC power supply.

Uploaded by

Pavel Križnar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
51 views

Paper On Function Generator

The document summarizes a 2MHz USB function generator. It can generate standard waveforms like sine, square and triangle from 0.01Hz to 2MHz. It stores up to 8192 waveform points and allows custom waveform creation. Additional features include frequency sweeping, noise generation, automated waveform sequencing, and bode plot generation when used with a PC scope. It has a small form factor, crystal-based stability, galvanically isolated USB, and runs on a 9V DC power supply.

Uploaded by

Pavel Križnar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

t info

w P roduc April 2007


Ne

2MHz USB Function Generator PCGU1000


Turns your computer into a powerfull function generator !
Features:
2.0 & 1.1 compatible √ Frequency range from 0.01Hz to 2 MHz.
√ Crystal-based stability.
In the box: √ USB port is galvanically isolated from the PC.
Getting started √ Low sine wave distortion.
manual
√ Two parallel output connectors for waveforms
√ TTL level synchronization output.
√ Stores up to 8192 of waveform points.
√ Standard waveforms: Sine, Square, and Triangle.
√ Predefined library waveforms included: Noise, Sweep,...
√ Create waveforms with the integrated signal wave editor
√ Sweep frequency range 0.0001Hz to 25MHz
√ Sweep time 1ms to 10 hours
√ Noise mode bandwidth 25MHz
√ Extended bode plot option together with PC scope.
Small and stylish, √ Automated wave sequence generation, using file or com-
Space saving design puter RS232 input.

Automated wave sequence generation

Main screen
Wave editor

Specifications:
• Amplitude range: 0.1Vpp to 10Vpp @ 1KHz //600 Ohm / 0V offset
• Frequency setting resolution: 0.01%.
• With internal 40 dB attenuator (output divided by 100)
Bode plot functions, using any of our PC
• Direct Digital wave synthesis (DDS), 8192 samples wave table. scopes, PCSU1000, PCS500, PCS100.
• Amplitude resolution: 0.4% of full scale.
• Offset: from 0 to -5V or +5V max. (resolution 0.4% of full scale).
• Vertical resolution: 8 bits (0.4% of full scale). Minimum system requirements
• Sample rate: 50MHz. • IBM compatible PC
• Typical sine wave distortion (THD): < 0.08%. • Windows 98SE, ME, 2000, XP, Vista
• SVGA display card (min. 800x600)
• Output impedance: 2 x 50 Ohm. • mouse
• Power supply: World universal 9V DC adapter, 600mA. • free USB port
• Dimensions (wxdxh): 55x190x200mm (2.2”x7.5”x7.9”). • CD Rom player

You might also like