Virabrequim C6.6
Virabrequim C6.6
Virabrequim C6.6
Page 1 of 5
Fechar o SIS
Tela anterior
produtos: WHEEL LOADER
Modelo: 938H WHEEL LOADER JKM
Configuração: 938H Wheel Loader JKM00001-UP (MACHINE) POWERED BY C6.6 Engine
Especificações
C6.6 Engines for Caterpillar Built Machines
Número de Mídia -KENR5290-16 Data de Publicação -01/03/2014 Data de Atualização -04/05/2017
i05333114
Crankshaft
SMCS - 1202
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/02/2023
938H Wheel Loader JKM00001-UP (MACHINE) POWERED BY C6.6 Engine(SEB... Page 2 of 5
Illustration 1 g01349782
Typical example
(1) Crankshaft gear
(2) Crankshaft
(3) Crankshaft thrust washers
Maximum permissible temperature of the gear for installation on the crankshaft ... 180 °C (356 °F)
The end play of a new crankshaft ... 0.17 to 0.41 mm (0.0067 to 0.0161 inch)
Standard thickness of thrust washer ... 2.69 to 2.75 mm (0.1059 to 0.1083 inch)
Oversize thickness of thrust washer ... 2.89 to 2.95 mm (0.1138 to 0.1161 inch)
Illustration 2 g01349784
Typical example
Table 1
The Undersize Diameter of the Crankshaft Journals
Dimension 0.25 mm (0.010 inch) 0.51 mm (0.020 inch) 0.76 mm (0.030 inch)
83.756 to 83.736 mm 83.502 to 83.482 mm 83.248 to 83.228 mm
A
(3.2975 to 3.2967 inch) (3.2875 to 3.2867 inch) (3.2775 to 3.2767 inch)
71.746 to 71.726 mm 71.492 to 71.472 mm 71.238 to 71.218 mm
B
(2.8246 to 2.8239 inch) (2.8146 to 2.8139 inch) (2.8046 to 2.8039 inch)
C 38.165 mm (1.5026 inch) 38.165 mm (1.5026 inch) 38.165 mm (1.5026 inch)
35.38 mm 35.38 mm 35.38 mm
D
(1.3929 inch )maximum (1.3929 inch )maximum (1.3929 inch )maximum
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/02/2023
938H Wheel Loader JKM00001-UP (MACHINE) POWERED BY C6.6 Engine(SEB... Page 3 of 5
Table 2
Minimum Width of machined Area of Crankshaft Web
1 2 to 9 10 and 11 12
Web 25.11 mm 22.86 mm 23.15 mm 26.86 mm
(0.9886 inch) (0.9000 inch) (0.9114 inch) (1.0575 inch)
If necessary, machine the thrust face in order to remove damage. Refer to Table 2 for information.
Illustration 3 g01283112
(4) Journal #1
(5) Journal #2
(6) Journal #3
(7) Journal #4
(8) Journal #5
(9) Journal #6
(10) Journal # 7
Table 3
Journal Run Out of the Journals
(1) Mounting
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/02/2023
938H Wheel Loader JKM00001-UP (MACHINE) POWERED BY C6.6 Engine(SEB... Page 4 of 5
The radii of all the crankshaft journals must be machined. This machining must return the crankshaft
to the original standard. The radii must give a smooth transition from the journal to the side machined
face.
Illustration 4 g01283119
Typical example
The edge of the oil holes (11) must be machined to the original standard after machining of the
crankshaft.
Oil hole
The maximum radius of the edge of the oil hole ... 0.5 mm (0.0197 inch)
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/02/2023
938H Wheel Loader JKM00001-UP (MACHINE) POWERED BY C6.6 Engine(SEB... Page 5 of 5
Refer to the Specifications Module, "Connecting Rod Bearing Journal" topic for more information on
the connecting rod bearing journals and connecting rod bearings.
Refer to the Specifications Module, "Main Bearing Journal" topic for information on the main
bearing journals and for information on the main bearings.
Direitos Autorais 1993 - 2023 Caterpillar Inc. Mon Feb 13 13:38:23 UTC-0300 2023
Todos os Direitos Reservados.
Rede Particular Para Licenciados SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/02/2023