0% found this document useful (0 votes)
53 views5 pages

As Sold Offer For 35 M3 HR DMF - Acf - Softener - R2 PDF

Download as pdf or txt
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 5

A & M TECHNOLOGIES

Ref: A&M/TL/SAM/SOFT/R2
14th Mar, 2023

To,
M/s. SAM Aqua Exports LLP,
## 74-2-12A, Ashok Nagar,
Vijayawada, 520007,
Andhra Pradesh

Dear Sir,

Sub: Offer for Thermax make Water Treatment Plant

Thank you very much for your above said enquiry.

With reference to the above mentioned subject, we are pleased to offer a water treatment system
consisting of Filters and Softener.

We trust the above is in line and if you require any further details / clarifications, please feel free to
contact us.

Thanking you and assuring you of our best attention at all times.

Yours truly,

For A & M TECHNOLOGIES,

M.RAMA KRISHNA
+91 9848186200

Encl : a / a

## 50-121-14/1, B.S.Layout, Seethammadhara, Visakhapatnam - 13


Tel: (0891) 2535041 Fax: 0891 2536234 E-Mail: [email protected]
For more information about Thermax, Visit us at: www.thermaxglobal.com
Raw Water Analysis

Source of Raw water: Bore water

S No. Particulars Unit Value


1. Total Hardness ppm 150

Design Basis

S No. Description Result


1. DMF Feed & Outlet Flow 35 M3/Hr
2. ACF Feed & Outlet Flow 35 M3/Hr
3. Softener Feed & Outlet Flow 35 M3/Hr

Outlet Parameters

S No. Description Result


1. Total Hardness (After Softener) <5 ppm
2. OBR 700 M3

Scheme

Filter Feed Pump  Dual Media Filter  Activated Carbon Filter  Softener  Regeneration Tank
 Storage Tank (By Customer)

Scope of Supply

S No. Description Scope


1. Filter Feed Pump Thermax Scope
2. Dual Media Filter Thermax Scope
3. Activated Carbon Filter Thermax Scope
4. Softener Unit Thermax Scope
5. Regeneration Tank Thermax Scope
6. Storage Tank By Customer
Technical Specifications

1. Filter Feed Pump


Nos offered 1 no.
Flow 35 M3/Hr
Head 35 mwc
Type Centrifugal
Material of Construction CI
Make Johnson

2. Dual Media Filter


Nos offered 1 no.
Diameter 1500 mm
Height of straight 1500 mm
Material of Construction MSEP
Operation Manual
Design Pressure 3.5 Kg/cm2
Media Pebbles, Gravels, Graded Sand,
Anthracite

3. Activated Carbon Filter


Nos offered 1 no.
Diameter 1500 mm
Height of straight 1500 mm
Material of Construction MSEP
Operation Manual
Design Pressure 3.5 Kg/cm2
Media Pebbles, Gravels, Graded Sand,
Activated Carbon

4. Softener Unit
Nos offered 1 no.
Diameter 1400 mm
Height of straight 2500 mm
Material of Construction MSEP
Operation Manual
Design Pressure 3.5 Kg/cm2
Resin Quantity 1950 Ltrs (Tulsion T 42Na)
Make Thermax
OBR 700 M3
Hardness Test Kit 1 no.

5. Regeneration Tank
Nos offered 1 no.
Capacity 2000 Ltrs
Material of Construction LLDPE
Make Thermax Approved

6. Storage Tank By Customer


List of Instruments

S No. Description Qty


(nos)
A. Dual Media Filter
1. Butterfly valves 5
2. Diaphragm valves 1
3. Needle valve 4
4. Pressure gauges 2

B. Activated Carbon Filter


1. Butterfly valves 5
2. Diaphragm valves 1
3. Needle valve 4
4. Pressure gauges 2

C. Softener unit
1. Butterfly valves 4
2. Diaphragm valves 3
3. Needle valve 4
4. Airvent diaphragm valve 1
5. Pressure gauges 2
6. Ejector 1

List of Exclusions

1. Piping upto inlet of filter feed pump.


2. Electrical power termination points at motor and instruments.
3. All civil works like foundations, drain etc.
4. Softener outlet.
5. Unloading & leading of the equipment on foundations.
Commercial Terms & Conditions

Price Basis – Ex-Works, Pune

Our basic price for the design, engineering and supply of Softener plant shall be: Rs.14,90,000/-
(Rupees Fourteen Lakhs and Ninety Thousand Only)

PACKING & FORWARDING:


Nil.

SALES TAX:
GST @18% extra or as applicable at the time of delivery.

PAYMENT TERMS:
40% advance along with clear Purchase Order and balance against Proforma Invoice prior to
dispatch.

TRANSPORTATION:
Extra at actuals from Pune to site in customer scope.

TRANSIT INSURANCE:
Extra at actuals in customer scope.

DELIVERY:
10-12 weeks from the date of clear purchase order along with requisite advance.

ERECTION & COMMISSIONING CHARGES:


Our lumpsum charges shall be of Rs.75,000/-, plus GST extra as applicable.

GUARANTEE /WARRANTEE:
Our guarantee/warrantee for the plant supplied by us shall be 12 months from the date of
commissioning OR 18 months from the date of material dispatch, whichever is earlier.

STATUTORY VARIATIONS:
Any change in Govt. policies, which effect prices, duties & taxes directly or indirectly during dispatch
shall be to the customer’s account.

VALIDITY:
Our offer is valid for a period of 30 days.

For A & M TECHNOLOGIES

You might also like