Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    Mm610i PDF

    Uploaded by

    Hadis Mardan
    The MM610i is an internally mounted flange facing machine that can machine flanges from 2 to 24 inches in diameter. It features precision construction, geared continuous groove facing feeds to cut a gramophone finish, and a striker/kick boring function to perform a variety of machining applications. The machine comes with standard tools and components to face flanges and cut seal grooves. Optional accessories allow machining different groove patterns and converting the machine to hydraulic drive.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mm610i PDF

    Uploaded by

    Hadis Mardan
    45 views3 pages
    The MM610i is an internally mounted flange facing machine that can machine flanges from 2 to 24 inches in diameter. It features precision construction, geared continuous groove facing feeds to cut a gramophone finish, and a striker/kick boring function to perform a variety of machining applications. The machine comes with standard tools and components to face flanges and cut seal grooves. Optional accessories allow machining different groove patterns and converting the machine to hydraulic drive.

    Original Title

    mm610i.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The MM610i is an internally mounted flange facing machine that can machine flanges from 2 to 24 inches in diameter. It features precision construction, geared continuous groove facing feeds to cut a gramophone finish, and a striker/kick boring function to perform a variety of machining applications. The machine comes with standard tools and components to face flanges and cut seal grooves. Optional accessories allow machining different groove patterns and converting the machine to hydraulic drive.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views3 pages

    Mm610i PDF

    Uploaded by

    Hadis Mardan
    The MM610i is an internally mounted flange facing machine that can machine flanges from 2 to 24 inches in diameter. It features precision construction, geared continuous groove facing feeds to cut a gramophone finish, and a striker/kick boring function to perform a variety of machining applications. The machine comes with standard tools and components to face flanges and cut seal grooves. Optional accessories allow machining different groove patterns and converting the machine to hydraulic drive.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    MM610i

    Internal Mount Flange Facing Machine


    2 – 24” (50 - 610mm)

    KEY FEATURES
    • Precision construction
    • Geared continuous groove facing feeds for a
    gramophone finish (ASME Standard)
    • Striker/kick boring feeds, to complete a full range of
    machining applications
    • Quick set independent base for improved on-site
    operation
    • Hardened slide ways to maintain long term accuracy
    • Swivel tool post for groove details; reduces need for
    separate accessories

    DESCRIPTION APPLICATIONS
    An internally mounted, lightweight and robust flange For all types of flange facing, seal grooving and weld
    facing machine using fixed gears to produce continuous preparation.
    groove gramophone finishes to ASME Standard.

    SPECIFICATION FACING FEED RATES & GROOVES PER INCH


    Min Facing Diameter 50mm (2”) Finish mm/rev inches/rev grooves/inch
    Max Facing Diameter 610mm (24”) 1.0mm pitch feed Fine 0.114 0.004 224
    Small 3 Jaw Base 50mm – 122mm screw (optional)
    Coarse 0.455 0.018 56
    Clamping Range (2” – 4.8”)
    1.25mm pitch feed Fine 0.142 0.006 179
    4 Jaw Base 120mm - 560mm
    screw (supplied)
    Clamping Range (4.7” – 22”) Coarse 0.568 0.022 45
    530mm
    Min Swing Diameter 1.75mm pitch feed Fine 0.199 0.008 128
    (20.8”)
    screw (supplied)
    Tool Post Travel 40mm (1.6”) Coarse 0.795 0.031 32
    Rpm (max) 76
    Standard drive type Air
    Hydraulic option available? On request
    Number of feed settings 2
    Output 0.82kw (1.1 hp)
    Air supply needed @ 90psi
    1.42m3/min 50cfm

    Page 1 of 3

    www.miragemachines.com ООО "Кристалл Северо-Запад"


    www.hydrotool.ru
    +7(812)603-29-41
    MM610i
    Internal Mount Flange Facing Machine

    INCLUDED AS STANDARD WITH MACHINE COMPONENT WEIGHTS


    Weight (excl base) 21kg 47lbs
    The machine is supplied complete with the following items;
    Max base assy Weight 8kg 18lbs
     Toolkit including tools and inserts
     Air filter lubricator

    SHIPPING WEIGHTS
     2 lead screws
     Hose connection
     All required mounting feet and extensions Box 1 Weight 65kg 144lbs
     Storage / shipping box
     CE certificate,
     Packing list and manual
    SHIPPING DIMENSIONS
    Length Width Height
    SET UP AND OPERATION Box 1 65cm (26”) 45cm (18”) 43cm (17”)
    The operator must be:
    • Trained and conversant with the product
    • Able to identify the correct and incorrect use of static
    or portable machines.
    • Comply with all local and internationally recognised
    safe use of powered machines.

    Exploded view showing all base components,


    collet mount and setting straps.

    IMPORTANT
    PLEASE REVIEW OPTIONS, ACCESSORIES
    AND SPARE PARTS ON NEXT PAGES

    Page 2 of 3

    www.miragemachines.com ООО "Кристалл Северо-Запад"


    www.hydrotool.ru
    +7(812)603-29-41
    MM610i
    Internal Mount Flange Facing Machine

    MM610i FLANGE FACING MACHINE OPTIONS & ACCESSORIES


    SPARES KIT LENS RING MACHINING KIT

    Part number: MM1000i-SK


    Part number: MM610i-LRK
    Recommended for 2 year use. Kit varies
    Optional Lens Ring Kits are used in
    by machine, but typically comprises
    place of the standard tool post on
    machine bolts, ram bolts, feed nut screw,
    flange facing machines for performing
    feed nut bolt, tool holder, spares kit for
    repair work on 20° lens ring flanges.
    Modec motor).

    OPTIONAL LEAD SCREW


    SURFACE COMPARATOR
    Used to create different finishes..

    Part number: MM610i-CFM-004 Part number: RBC0120

    Description Grooves A set of roughness specimens in a


    per inch heavy-duty presentation suited to
    workshop use
    M12 x 1.0mm pitch 56, 224

    HYDRAULIC CONVERSION KIT

    Alternative motor to convert the


    machine to hydraulic drive.

    Page 3 of 3

    www.miragemachines.com ООО "Кристалл Северо-Запад"


    www.hydrotool.ru
    +7(812)603-29-41

    You might also like