Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    VZH-1820 Catalog

    Uploaded by

    Vinh
    This document provides an operation manual for the HIOS VZH series screwdriver with hammer head and shock-less stand models. It includes 3 or fewer sentences: The manual outlines proper use and maintenance of the screwdriver, describing accessories, bit requirements, torque adjustment, and precautions to take when operating the tool. Replacement of carbon brushes is also covered, noting the wear points that indicate needing replacement. Specifications of the screwdriver models are provided at the end.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    VZH-1820 Catalog

    Uploaded by

    Vinh
    34 views5 pages
    This document provides an operation manual for the HIOS VZH series screwdriver with hammer head and shock-less stand models. It includes 3 or fewer sentences: The manual outlines proper use and maintenance of the screwdriver, describing accessories, bit requirements, torque adjustment, and precautions to take when operating the tool. Replacement of carbon brushes is also covered, noting the wear points that indicate needing replacement. Specifications of the screwdriver models are provided at the end.

    Original Description:

    VZH-1820 catalog

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides an operation manual for the HIOS VZH series screwdriver with hammer head and shock-less stand models. It includes 3 or fewer sentences: The manual outlines proper use and maintenance of the screwdriver, describing accessories, bit requirements, torque adjustment, and precautions to take when operating the tool. Replacement of carbon brushes is also covered, noting the wear points that indicate needing replacement. Specifications of the screwdriver models are provided at the end.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views5 pages

    VZH-1820 Catalog

    Uploaded by

    Vinh
    This document provides an operation manual for the HIOS VZH series screwdriver with hammer head and shock-less stand models. It includes 3 or fewer sentences: The manual outlines proper use and maintenance of the screwdriver, describing accessories, bit requirements, torque adjustment, and precautions to take when operating the tool. Replacement of carbon brushes is also covered, noting the wear points that indicate needing replacement. Specifications of the screwdriver models are provided at the end.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    Screwdriver with Hammer Head Model (with Shock-less Stand)

    VZH-1820 / VZH-1820PS
    VZH-3012 / VZH-3012PS
    Operation Manual
    2021.03 ET-A073 21A

    Thank you for purchasing HIOS VZH series screwdriver. Please read this operation manual thoroughly before use to ensure
    proper operation. Store this manual in a safe place for future reference.
    Please confirm following accessories attached with this product before using.

    Attached Accessories

    Carbon brushes
    1 pair (VZ18-0480)

    x 3pcs Hexagon socket set Screws


    (M4 x 6mm)

    L-wrench
    2mm Hex x 1

    Operation Manual x 1
    Precautions notice x 1

    converter plug x 1
    *Attached with
    Hammer Head Screwdriver
    (with Shock-less Stand) 100V type only

    <Precautions>
    1. Do not connect this tool to the power outlet when attach or remove the bit.
    During the tool is not in use, please slide FOR/REV switch to OFF(Neutral position) to avoid unintentional starting.
    2. Hold the shock-less stand with bolt firmly on the work benches.
    3. Please prepare the bit which type is according as following standard.
    NOTE: Do not attach improper type of bit avoid screwdriver to be broken down.
    5
    6.3
    Proper Bit type Improper Bit type

    ・6.35mm hexagon shape


    (Double end Bit)
    9.0

    ・The length from the end of bit More than 9.0


    to center of the ditch is 9mm

    (Bit with double ditches)

    4. Avoid any location that is wet, moist or oily.


    Never use the screwdriver in the place where there is a lot of dust, debris, oil or corrosive gas.
    Otherwise an electric shock or damage might be caused in the place with high humidity in particular.
    5. Please use the screwdriver carefully due to avoid drop off.
    6. Before changing rotation way from Forward to Reverse, please make motor to be stopped by sliding FOR/REV
    switch to OFF (Neutral position).
    🅐
    7. Please note the following about carbon brushes.
    (1) The range of use is up to the position of the groove on the brush surface. (🅐)
    When it wears to the specified position, replace it with a new one.
    (2) When replacing the carbon brush, replace the two places with new ones at the
    same time. (🅑)
    ・When replacing, set the brush surface in the direction that matches the internally
    rotating commuter surface.
    ・Be careful not to overtighten the carbon brush cap.
    🅑
    (3) In order to prevent the insulation from being deteriorated due to the wear
    powder of the carbon brush, be sure to send the screwdriver for maintenance and
    inspection 1 million times or after 1 year of use.
    (4) Please use genuine HIOS products.
    Do not use carbon brushes of different dimensions or made by other companies. It may cause a malfunction.
    Please note that we are not responsible for any accidents or malfunctions caused by using parts other than
    those specified.
    Arm Holder
    <Usage Procedure>
    1. The way of driver grip can be adjustable after take off 3pcs of hexagon
    Hexagon socket set screw
    socket set screws from the arm holder.
    After adjusting of the grip position or the way of slide arm, please fix it
    again with hexagon socket set screws.
    2. Please hold the stand base at 3points by bolts.
    Make sure it to be hold firmly to withstand large shock.
    3. Set up the height of the slide arm.
    Put the prop through the shock-less holder and tighten the wing bolt
    at the demanding height of the slide arm to hold.
    *NOTE: Each set screws are sometimes loosen due to tightening shock.
    Please check them periodically.

    1
    4. Insert the bit to the screwdriver.
    Push down the joint shaft collar at the end of the driver upwards
    and insert the bit.
    Check the bit not to come loose after that.
    Insert a bit
    during pushing
    down the joint
    *NOTE:
    shaft coller.
    Please make sure whether the bit size# is proper for the screws to
    avoid damaging the screw recess.

    5. Torque Adjustment
    Adjust the torque adjusting nut(T/A nut) to the appropriate Level by following to “the
    Approx. Guidance of Output Torque” on this book.
    The scale on the guidance is assuming same scale on the torque adjusting nut of the
    screwdriver.
    *NOTE:
    Please make sure the exact output torque value by using Torque meter* due to the value
    on the guidance is
    just for your reference.

    6. Connect AC plug to the power outlet.


    FOR/REV Switch
    7. Please confirm the rotation way as slide the FOR/REV switch to “FOR” or “REV” side.
    As for the driver with PUSH to start will be worked when the screw is pressed by bit
    inserted on the screwdriver.

    8. Please tighten the screw for a trial before using indeed.


    Please make sure the exact output torque value by using Torque meter* and adjust T/A nut
    until achieve the target torque.

    9. If in case of loosening the tightened screw, please slide the FOR/REV switch to “REV”.
    The tightened screw can be loosened by the driver with several times impact.

    *We recommend using HIOS Torque Meter for torque checking or setting output torque of a screwdriver.
    ◦Measuring slack torque of tightened screws or torque increase ··· HDP series
    ◦Making torque setting on an electric screwdriver, checking output torque of tools ··· HP series

    2
    Structure of VZH Series

    Driver Cord

    AC plug

    FOR/REV Switch
    Carbon Brush

    Carbon Brush

    Prop
    Shock-less Holder Grip

    Arm cap Wing Bolt

    Arm Holder
    Shock-less Stopper
    Torque adjusting nut
    Slide Arm (T/A nut)

    Turret

    Stand Base
    Turret Set screw
    Bit Joint shaft Collar

    Length of Slide Arm (mm)


    530 (475)
    () is the active range of sliding
    Height of Prop (mm) 570
    Height 8
    Internal dia. of hole 6
    Stand Base (mm)
    52
    Interval length of holes
    a triangle (L) on a side

    3
    Specification of VZH driver

    VZH-1820 VZH-3012
    Model
    VZH-1820PS VZH-3012PS
    AC 100V±5% AC 100V±5%
    Approx. 40W Approx. 40W
    Power Input / Power consumption (W)
    AC 120V±5% AC 120V±5%
    Approx. 60W Approx. 60W

    Output Torque N·m 3.0 - 7.0 4.0 -10.0


    Range (kgf·cm) (30-70) (40-100)
    Unloaded Rotation Speed (r.p.m±10%) 470 270
    Screw Size (mm) 5.0 – 6.0 5.0 - 6.0
    Dimension(mm) Grip dia. / Total Length Φ39 / 345mm
    1.8 kg
    Weight (kg)
    (Including "driver cord" and "slide arm")
    Bit Type 1/4 HEX
    AC Cord Length (m) 3m

    ■ Approx. Guidance of Output Torque


    Ｎ・m
    16
    14
    12
    10 VZH-3012/VZH-3012PS
    8
    VZH-1820/VZH-1820PS
    6
    4
    2
    0
    1　　2　 3 4 5 6 7 8 9 10
    scale

    You might also like