Hibernate Envers - Easy Entity Auditing

Hibernate Envers Reference Documentation

3.6.3.Final

Preface ............................................................................................................................. v 1. Quickstart .................................................................................................................... 1 2. Short example ............................................................................................................. 5 3. Configuration ............................................................................................................... 7 3.1. Basic configuration .............................................................................................. 7 3.2. Choosing an audit strategy .................................................................................. 7 3.3. Reference .......................................................................................................... 7 4. Logging data for revisions ........................................................................................ 13 5. Queries ...................................................................................................................... 17 5.1. Querying for entities of a class at a given revision ............................................... 17 5.2. Querying for revisions, at which entities of a given class changed ......................... 18 6. Generating schema with Ant ..................................................................................... 21 7. Generated tables and their content ........................................................................... 23 8. Audit table partitioning .............................................................................................. 25 8.1. Benefits of audit table partitioning ...................................................................... 25 8.2. Suitable columns for audit table partitioning ........................................................ 25 8.3. Audit table partitioning example ......................................................................... 26 8.3.1. Determining a suitable partitioning column ............................................... 8.3.2. Determining a suitable partitioning scheme .............................................. 9. Building from source and testing .............................................................................. 9.1. Building from source ......................................................................................... 9.2. Contributing ...................................................................................................... 9.3. Envers integration tests ..................................................................................... 10. Mapping exceptions ................................................................................................. 10.1. What isn't and will not be supported ................................................................. 10.2. What isn't and will be supported ...................................................................... 10.3. @OneToMany+@JoinColumn .......................................................................... 11. Migration from Envers standalone ........................................................................... 11.1. Changes to code ............................................................................................ 11.2. Changes to configuration ................................................................................. 11.3. Changes to the revision entity .......................................................................... 12. Links ........................................................................................................................ 26 27 29 29 29 29 31 31 31 31 33 33 33 34 35

iii

iv

Preface
The Envers project aims to enable easy auditing of persistent classes. All that you have to do is annotate your persistent class or some of its properties, that you want to audit, with @Audited. For each audited entity, a table will be created, which will hold the history of changes made to the entity. You can then retrieve and query historical data without much effort. Similarly to Subversion, the library has a concept of revisions. Basically, one transaction is one revision (unless the transaction didn't modify any audited entities). As the revisions are global, having a revision number, you can query for various entities at that revision, retrieving a (partial) view of the database at that revision. You can find a revision number having a date, and the other way round, you can get the date at which a revision was commited. The library works with Hibernate and requires Hibernate Annotations or Entity Manager. For the auditing to work properly, the entities must have immutable unique identifiers (primary keys). You can use Envers wherever Hibernate works: standalone, inside JBoss AS, with JBoss Seam or Spring. Some of the features:

1. auditing of all mappings defined by the JPA specification 2. auditing of Hibernate mappings, which extend JPA, like custom types and collections/maps of "simple" types (Strings, Integers, etc.) (see also Chapter 10, Mapping exceptions) 3. logging data for each revision using a "revision entity" 4. querying historical data

vi

Chapter 1.

Quickstart
If you're using JPA, when coniguring Hibernate (in persistence.xml), add the following event listeners: (this will allow Envers to check if any audited entities were modified)

<persistence-unit ...> <provider>org.hibernate.ejb.HibernatePersistence</provider> <class>...</class> <properties> <property name="hibernate.dialect" ... /> <!-- other hibernate properties --> <property name="hibernate.ejb.event.post-insert" value="org.hibernate.ejb.event.EJB3PostInsertEventListener,org.hibernate.envers.event.AuditEventListener" / > <property name="hibernate.ejb.event.post-update" value="org.hibernate.ejb.event.EJB3PostUpdateEventListener,org.hibernate.envers.event.AuditEventListener" / > <property name="hibernate.ejb.event.post-delete" value="org.hibernate.ejb.event.EJB3PostDeleteEventListener,org.hibernate.envers.event.AuditEventListener" / > <property name="hibernate.ejb.event.pre-collection-update" value="org.hibernate.envers.event.AuditEventListener" /> <property name="hibernate.ejb.event.pre-collection-remove" value="org.hibernate.envers.event.AuditEventListener" /> <property name="hibernate.ejb.event.post-collection-recreate" value="org.hibernate.envers.event.AuditEventListener" /> </properties> </persistence-unit>

If you're using Hibernate directly, add the following to hibernate.cfg.xml:

<hibernate-configuration> <session-factory> <listener class="org.hibernate.envers.event.AuditEventListener" type="post-insert"/> <listener class="org.hibernate.envers.event.AuditEventListener" type="post-update"/> <listener class="org.hibernate.envers.event.AuditEventListener" type="post-delete"/> <listener class="org.hibernate.envers.event.AuditEventListener" type="pre-collection-update"/> <listener class="org.hibernate.envers.event.AuditEventListener" type="pre-collection-remove"/> <listener class="org.hibernate.envers.event.AuditEventListener" type="post-collectionrecreate"/>

</session-factory> </hibernate-configuration>

Chapter 1. Quickstart

The EJB3Post...EvenListeners are needed, so that ejb3 entity lifecycle callback methods work (@PostPersist, @PostUpdate, @PostRemove. Then, annotate your persistent class with @Audited - this will make all properties audited. For example:

import org.hibernate.envers.Audited; import import import import javax.persistence.Entity; javax.persistence.Id; javax.persistence.GeneratedValue; javax.persistence.Column;

@Entity @Audited // that's the important part :) public class Person { @Id @GeneratedValue private int id; private String name; private String surname; @ManyToOne private Address address; // add getters, setters, constructors, equals and hashCode here }

And the referenced entity:

@Entity @Audited public class Address { @Id @GeneratedValue private int id; private String streetName; private Integer houseNumber; private Integer flatNumber; @OneToMany(mappedBy = "address") private Set<Person> persons; // add getters, setters, constructors, equals and hashCode here }

And that's it! You create, modify and delete the entites as always. If you look at the generated schema, you will notice that it is unchanged by adding auditing for the Address and Person entities. Also, the data they hold is the same. There are, however, two new tables - Address_AUD and Person_AUD, which store the historical data, whenever you commit a transaction. Instead of annotating the whole class and auditing all properties, you can annotate only some persistent properties with @Audited. This will cause only these properties to be audited. You can access the audit (history) of an entity using the AuditReader interface, which you can obtain when having an open EntityManager.

AuditReader reader = AuditReaderFactory.get(entityManager); Person oldPerson = reader.find(Person.class, personId, revision)

The T find(Class<T> cls, Object primaryKey, Number revision) method returns an entity with the given primary key, with the data it contained at the given revision. If the entity didn't exist at this revision, null is returned. Only the audited properties will be set on the returned entity. The rest will be null. You can also get a list of revisions at which an entity was modified using the getRevisions method, as well as retrieve the date, at which a revision was created using the getRevisionDate method.

Chapter 2.

Short example
For example, using the entities defined above, the following code will generate revision number 1, which will contain two new Person and two new Address entities:

entityManager.getTransaction().begin(); Address address1 = new Address("Privet Drive", 4); Person person1 = new Person("Harry", "Potter", address1); Address address2 = new Address("Grimmauld Place", 12); Person person2 = new Person("Hermione", "Granger", address2); entityManager.persist(address1); entityManager.persist(address2); entityManager.persist(person1); entityManager.persist(person2); entityManager.getTransaction().commit();

Now we change some entities. This will generate revision number 2, which will contain modifications of one person entity and two address entities (as the collection of persons living at address2 and address1 changes):

entityManager.getTransaction().begin(); Address address1 = entityManager.find(Address.class, address1.getId()); Person person2 = entityManager.find(Person.class, person2.getId()); // Changing the address's house number address1.setHouseNumber(5) // And moving Hermione to Harry person2.setAddress(address1); entityManager.getTransaction().commit();

We can retrieve the old versions (the audit) easily:

AuditReader reader = AuditReaderFactory.get(entityManager); Person person2_rev1 = reader.find(Person.class, person2.getId(), 1); assert person2_rev1.getAddress().equals(new Address("Grimmauld Place", 12)); Address address1_rev1 = reader.find(Address.class, address1.getId(), 1); assert address1_rev1.getPersons().getSize() == 1; // and so on

Chapter 3.

Configuration
3.1. Basic configuration
To start working with Envers, all configuration that you must do is add the event listeners to persistence.xml, as described in the Chapter 1, Quickstart. However, as Envers generates some entities, and maps them to tables, it is possible to set the prefix and suffix that is added to the entity name to create an audit table for an entity, as well as set the names of the fields that are generated.

3.2. Choosing an audit strategy

After the basic configuration it is important to choose the audit strategy that will be used to persist and retrieve audit information. There is a trade-off is between the performance of persisting and the performance of querying the audit information. Currently there two audit strategies:

1. The default audit strategy persists the audit data together with a start revision. For each row inserted, updated or deleted in an audited table, one or more rows are inserted in the audit tables, together with the start revision of its validity. Rows in the audit tables are never updated after insertion. Queries of audit information use subqueries to select the applicable rows in the audit tables. These subqueries are notoriously slow and difficult to index. 2. The alternative is a validity audit strategy. This strategy stores the start-revision and the endrevision of audit information. For each row inserted, updated or deleted in an audited table, one or more rows are inserted in the audit tables, together with the start revision of its validity. But at the same time the end-revision field of the previous audit rows (if available) are set to this revision. Queries on the audit information can then use 'between start and end revision' instead of subqueries as used by the default audit strategy. The consequence of this strategy is that persisting audit information will be a bit slower, because of the extra updates involved, but retrieving audit information will be a lot faster. This can be improved by adding extra indexes.

3.3. Reference
In more detail, here are the properties that you can set:

Table 3.1. Envers Configuration Properties

Property name Default value Description String that will be prepended to the name of an audited entity to create the name of the entity, that will hold audit information.

org.hibernate.envers.audit_table_prefix

Chapter 3. Configuration

Property name

Default value

Description String that will be appended to the name of an audited entity to create the name of the entity, that will hold audit information. If you audit an entity with a table name Person, in the default setting Envers will generate a Person_AUD table to store historical data.

org.hibernate.envers.audit_table_suffix _AUD

org.hibernate.envers.revision_field_name REV

Name of a field in the audit entity that will hold the revision number. Name of a field in the audit entity that will hold the type of the revision (currently, this can be: add, mod, del).

org.hibernate.envers.revision_type_field_name REVTYPE

org.hibernate.envers.revision_on_collection_change true

Should a revision be generated when a not-owned relation field changes (this can be either a collection in a oneto-many relation, or the field using "mappedBy" attribute in a one-to-one relation).

org.hibernate.envers.do_not_audit_optimistic_locking_field true

When true, properties to be used for optimistic locking, annotated with @Version, will be automatically not audited (their history won't be stored; it normally doesn't make sense to store it).

org.hibernate.envers.store_data_at_delete false

Should the entity data be stored in the revision when the entity is deleted (instead of only storing the id and all other properties as null). This is not normally needed, as the data is present in the lastbut-one revision. Sometimes, however, it is easier and more efficient to access it in the

Reference

Property name

Default value

Description last revision (then the data that the entity contained before deletion is stored twice).

org.hibernate.envers.default_schema null (same as normal tables)

The default schema name that should be used for be audit tables. Can overriden using the

@AuditTable(schema="...")

annotation. If not present, the schema will be the same as the schema of the normal tables. org.hibernate.envers.default_catalog null (same as normal tables) The default catalog name that should be used for be audit tables. Can overriden using the

@AuditTable(catalog="...")

annotation. If not present, the catalog will be the same as the catalog of the normal tables. org.hibernate.envers.audit_strategy org.hibernate.envers.strategy.DefaultAuditStrategy that should The audit strategy be used when persisting audit data. The default stores only the revision, at which an entity was modified. An alternative, the stores both the start revision and the end revision. Together these define when an audit row was valid, hence the name ValidityAuditStrategy. org.hibernate.envers.audit_strategy_validity_end_rev_field_name column name that will hold REVEND The the end revision number in audit entities. This property is only valid if the validity audit strategy is used. org.hibernate.envers.audit_strategy_validity_store_revend_timestamp the timestamp of the false Should end revision be stored, until which the data was valid, in addition to the end revision itself. This is useful to be able

org.hibernate.envers.strategy.ValidityAudi

Chapter 3. Configuration

Property name

Default value

Description to purge old Audit records out of a relational database by using table partitioning. Partitioning requires a column that exists within the table. This property is only evaluated if the ValidityAuditStrategy is used.

org.hibernate.envers.audit_strategy_validity_revend_timestamp_field_namename REVEND_TSTMP Column of the timestamp of the end revision

until which the data was valid. Only used if the ValidityAuditStrategy is used, and org.hibernate.envers.audit_strategy_validity_store_ evaluates to true

Important
The following configuration options have been added recently and should be regarded as experimental:

1. org.hibernate.envers.audit_strategy 2. org.hibernate.envers.audit_strategy_validity_end_rev_field_name 3. org.hibernate.envers.audit_strategy_validity_store_revend_timestamp 4. org.hibernate.envers.audit_strategy_validity_revend_timestamp_field_name

To change the name of the revision table and its fields (the table, in which the numbers of revisions and their timestamps are stored), you can use the @RevisionEntity annotation. For more information, see Chapter 4, Logging data for revisions. To set the value of any of the properties described above, simply add an entry to your persistence.xml. For example:

<persistence-unit ...> <provider>org.hibernate.ejb.HibernatePersistence</provider> <class>...</class> <properties> <property name="hibernate.dialect" ... /> <!-- other hibernate properties -->

10

Reference

<property name="hibernate.ejb.event.post-insert" value="org.hibernate.ejb.event.EJB3PostInsertEventListener,org.hibernate.envers.event.AuditEventListener" / > <property name="hibernate.ejb.event.post-update" value="org.hibernate.ejb.event.EJB3PostUpdateEventListener,org.hibernate.envers.event.AuditEventListener" / > <property name="hibernate.ejb.event.post-delete" value="org.hibernate.ejb.event.EJB3PostDeleteEventListener,org.hibernate.envers.event.AuditEventListener" / > <property name="hibernate.ejb.event.pre-collection-update" value="org.hibernate.envers.event.AuditEventListener" /> <property name="hibernate.ejb.event.pre-collection-remove" value="org.hibernate.envers.event.AuditEventListener" /> <property name="hibernate.ejb.event.post-collection-recreate" value="org.hibernate.envers.event.AuditEventListener" /> <property name="org.hibernate.envers.versionsTableSuffix" value="_V" /> <property name="org.hibernate.envers.revisionFieldName" value="ver_rev" /> <!-- other envers properties --> </properties> </persistence-unit>

The EJB3Post...EvenListeners are needed, so that ejb3 entity lifecycle callback methods work (@PostPersist, @PostUpdate, @PostRemove. You can also set the name of the audit table on a per-entity basis, using the @AuditTable annotation. It may be tedious to add this annotation to every audited entity, so if possible, it's better to use a prefix/suffix. If you have a mapping with secondary tables, audit tables for them will be generated in the same way (by adding the prefix and suffix). If you wish to overwrite this behaviour, you can use the @SecondaryAuditTable and @SecondaryAuditTables annotations. If you'd like to override auditing behaviour of some fields/properties in an embedded component, you can use the @AuditOverride(s) annotation on the place where you use the component. If you want to audit a relation mapped with @OneToMany+@JoinColumn, please see Chapter 10, Mapping exceptions for a description of the additional @AuditJoinTable annotation that you'll probably want to use. If you want to audit a relation, where the target entity is not audited (that is the case for example with dictionary-like entities, which don't change and don't have to be audited), just annotate it with @Audited(targetAuditMode = RelationTargetAuditMode.NOT_AUDITED). Then, when reading historic versions of your entity, the relation will always point to the "current" related entity.

11

12

Chapter 4.

Logging data for revisions

Envers provides an easy way to log additional data for each revision. You simply need to annotate one entity with @RevisionEntity, and a new instance of this entity will be persisted when a new revision is created (that is, whenever an audited entity is modified). As revisions are global, you can have at most one revisions entity. Please note that the revision entity must be a mapped Hibernate entity. This entity must have at least two properties: 1. an integer- or long-valued property, annotated with @RevisionNumber. Most often, this will be an auto-generated primary key. 2. a long- or j.u.Date- valued property, annotated with @RevisionTimestamp. Value of this property will be automatically set by Envers. You can either add these properties to your entity, or extend

org.hibernate.envers.DefaultRevisionEntity, which already has those two properties.

When using a Date, instead of a long/Long for the revision timestamp, take care not to use a mapping of the property which will loose precision (for example, using @Temporal(DATE) is wrong, as it doesn't store the time information, so many of your revisions will appear to happen at exactly the same time). A good choice is a @Temporal(TIMESTAMP). To additional data, you'll need to implement the org.jboss.envers.RevisionListener interface. Its newRevision method will be called when a new revision is created, before persisting the revision entity. The implementation should be stateless and thread-safe. The listener then has to be attached to the revisions entity by specifying it as a parameter to the @RevisionEntity annotation. Alternatively, you can use the getCurrentRevision method of the AuditReader interface to obtain the current revision, and fill it with desired information. The method has a persist parameter specifying, if the revision entity should be persisted before returning. If set to true, the revision number will be available in the returned revision entity (as it is normally generated by the database), but the revision entity will be persisted regardless of wheter there are any audited entities changed. If set to false, the revision number will be null, but the revision entity will be persisted only if some audited entities have changed. A simplest example of a revisions entity, which with each revision associates the username of the user making the change is: fill the entity with

package org.jboss.envers.example; import org.hibernate.envers.RevisionEntity; import org.hibernate.envers.DefaultRevisionEntity; import javax.persistence.Entity;

13

Chapter 4. Logging data for r...

@Entity @RevisionEntity(ExampleListener.class) public class ExampleRevEntity extends DefaultRevisionEntity { private String username; public String getUsername() { return username; } public void setUsername(String username) { this.username = username; } }

Or, if you don't want to extend any class:

package org.hibernate.envers.example; import org.hibernate.envers.RevisionNumber; import org.hibernate.envers.RevisionTimestamp; import org.hibernate.envers.RevisionEntity; import javax.persistence.Id; import javax.persistence.GeneratedValue; import javax.persistence.Entity; @Entity @RevisionEntity(ExampleListener.class) public class ExampleRevEntity { @Id @GeneratedValue @RevisionNumber private int id; @RevisionTimestamp private long timestamp; private String username; // Getters, setters, equals, hashCode ... }

An example listener, which, if used in a JBoss Seam application, stores the currently logged in user username:

package org.hibernate.envers.example; import org.hibernate.envers.RevisionListener; import org.jboss.seam.security.Identity; import org.jboss.seam.Component; public class ExampleListener implements RevisionListener { public void newRevision(Object revisionEntity) { ExampleRevEntity exampleRevEntity = (ExampleRevEntity) revisionEntity; Identity identity = (Identity) Component.getInstance("org.jboss.seam.security.identity"); exampleRevEntity.setUsername(identity.getUsername()); }

14

Having an "empty" revision entity - that is, with no additional properties except the two mandatory ones - is also an easy way to change the names of the table and of the properties in the revisions table automatically generated by Envers. In case there is no entity annotated with @RevisionEntity, a default table will be generated, with the name REVINFO.

15

16

Chapter 5.

Queries
You can think of historic data as having two dimension. The first - horizontal - is the state of the database at a given revision. Thus, you can query for entities as they were at revision N. The second - vertical - are the revisions, at which entities changed. Hence, you can query for revisions, in which a given entity changed. The queries in Envers are similar to Hibernate Criteria [http://www.hibernate.org/hib_docs/v3/ reference/en/html/querycriteria.html], so if you are common with them, using Envers queries will be much easier. The main limitation of the current queries implementation is that you cannot traverse relations. You can only specify constraints on the ids of the related entities, and only on the "owning" side of the relation. This however will be changed in future releases. Please note, that queries on the audited data will be in many cases much slower than corresponding queries on "live" data, as they involve correlated subselects. In the future, queries will be improved both in terms of speed and possibilities, when using the validtime audit strategy, that is when storing both start and end revisions for entities. See Chapter 3, Configuration.

5.1. Querying for entities of a class at a given revision

The entry point for this type of queries is:

AuditQuery query revisionNumber);

getAuditReader().createQuery().forEntitiesAtRevision(MyEntity.class,

You can then specify constraints, which should be met by the entities returned, by adding restrictions, which can be obtained using the AuditEntity factory class. For example, to select only entities, where the "name" property is equal to "John":

query.add(AuditEntity.property("name").eq("John"));

And to select only entites that are related to a given entity:

query.add(AuditEntity.property("address").eq(relatedEntityInstance)); // or query.add(AuditEntity.relatedId("address").eq(relatedEntityId));

17

Chapter 5. Queries

You can limit the number of results, order them, and set aggregations and projections (except grouping) in the usual way. When your query is complete, you can obtain the results by calling the getSingleResult() or getResultList() methods. A full query, can look for example like this:

List personsAtAddress = getAuditReader().createQuery() .forEntitiesAtRevision(Person.class, 12) .addOrder(AuditEntity.property("surname").desc()) .add(AuditEntity.relatedId("address").eq(addressId)) .setFirstResult(4) .setMaxResults(2) .getResultList();

5.2. Querying for revisions, at which entities of a given class changed

The entry point for this type of queries is:

AuditQuery query = getAuditReader().createQuery() .forRevisionsOfEntity(MyEntity.class, false, true);

You can add constraints to this query in the same way as to the previous one. There are some additional possibilities:

1. using AuditEntity.revisionNumber() you can specify constraints, projections and order on the revision number, in which the audited entity was modified 2. similarly, using AuditEntity.revisionProperty(propertyName) you can specify constraints, projections and order on a property of the revision entity, corresponding to the revision in which the audited entity was modified 3. AuditEntity.revisionType() gives you access as above to the type of the revision (ADD, MOD, DEL). Using these methods, you can order the query results by revision number, set projection or constraint the revision number to be greater or less than a specified value, etc. For example, the following query will select the smallest revision number, at which entity of class MyEntity with id entityId has changed, after revision number 42:

Number revision = (Number) getAuditReader().createQuery() .forRevisionsOfEntity(MyEntity.class, false, true) .setProjection(AuditEntity.revisionNumber().min()) .add(AuditEntity.id().eq(entityId)) .add(AuditEntity.revisionNumber().gt(42))

18

Querying for revisions, at which entities of a given class changed

.getSingleResult();

The second additional feature you can use in queries for revisions is the ability to maximalize/ minimize a property. For example, if you want to select the revision, at which the value of the actualDate for a given entity was larger then a given value, but as small as possible:

Number revision = (Number) getAuditReader().createQuery() .forRevisionsOfEntity(MyEntity.class, false, true) // We are only interested in the first revision .setProjection(AuditEntity.revisionNumber().min()) .add(AuditEntity.property("actualDate").minimize() .add(AuditEntity.property("actualDate").ge(givenDate)) .add(AuditEntity.id().eq(givenEntityId))) .getSingleResult();

The minimize() and maximize() methods return a criteria, to which you can add constraints, which must be met by the entities with the maximized/minimized properties. You probably also noticed that there are two boolean parameters, passed when creating the query. The first one, selectEntitiesOnly, is only valid when you don't set an explicit projection. If true, the result of the query will be a list of entities (which changed at revisions satisfying the specified constraints). If false, the result will be a list of three element arrays. The first element will be the changed entity instance. The second will be an entity containing revision data (if no custom entity is used, this will be an instance of DefaultRevisionEntity). The third will be the type of the revision (one of the values of the RevisionType enumeration: ADD, MOD, DEL). The second parameter, selectDeletedEntities, specifies if revisions, in which the entity was deleted should be included in the results. If yes, such entities will have the revision type DEL and all fields, except the id, null.

19

20

Chapter 6.

Generating schema with Ant

If you'd like to generate the database schema file with the Hibernate Tools Ant task, you'll probably notice that the generated file doesn't contain definitions of audit tables. To generate also the audit tables, you simply need to use org.hibernate.tool.ant.EnversHibernateToolTask instead of the usual org.hibernate.tool.ant.HibernateToolTask. The former class extends the latter, and only adds generation of the version entities. So you can use the task just as you used to. For example:

<target name="schemaexport" depends="build-demo" description="Exports a generated schema to DB and file"> <taskdef name="hibernatetool" classname="org.hibernate.tool.ant.EnversHibernateToolTask" classpathref="build.demo.classpath"/> <hibernatetool destdir="."> <classpath> <fileset refid="lib.hibernate" /> <path location="${build.demo.dir}" /> <path location="${build.main.dir}" /> </classpath> <jpaconfiguration persistenceunit="ConsolePU" /> <hbm2ddl drop="false" create="true" export="false" outputfilename="versioning-ddl.sql" delimiter=";" format="true"/> </hibernatetool> </target>

Will generate the following schema:

create table Address ( id integer generated by default as identity (start with 1), flatNumber integer, houseNumber integer, streetName varchar(255), primary key (id) ); create table Address_AUD ( id integer not null, REV integer not null, flatNumber integer, houseNumber integer, streetName varchar(255), REVTYPE tinyint, primary key (id, REV)

21

Chapter 6. Generating schema ...

); create table Person ( id integer generated by default as identity (start with 1), name varchar(255), surname varchar(255), address_id integer, primary key (id) ); create table Person_AUD ( id integer not null, REV integer not null, name varchar(255), surname varchar(255), REVTYPE tinyint, address_id integer, primary key (id, REV) ); create table REVINFO ( REV integer generated by default as identity (start with 1), REVTSTMP bigint, primary key (REV) ); alter table Person add constraint FK8E488775E4C3EA63 foreign key (address_id) references Address;

22

Chapter 7.

Generated tables and their content

For each audited entity (that is, for each entity containing at least one audited field), an audit table is created. By default, the audit table's name is created by adding a "_AUD" suffix to the original name, but this can be overriden by specifing a different suffix/prefix (see Chapter 3, Configuration) or on a per-entity basis using the @AuditTable annotation. The audit table has the following fields:

1. id of the original entity (this can be more then one column, if using an embedded or multiple id) 2. revision number - an integer 3. revision type - a small integer 4. audited fields from the original entity The primary key of the audit table is the combination of the original id of the entity and the revision number - there can be at most one historic entry for a given entity instance at a given revision. The current entity data is stored in the original table and in the audit table. This is a duplication of data, however as this solution makes the query system much more powerful, and as memory is cheap, hopefully this won't be a major drawback for the users. A row in the audit table with entity id ID, revision N and data D means: entity with id ID has data D from revision N upwards. Hence, if we want to find an entity at revision M, we have to search for a row in the audit table, which has the revision number smaller or equal to M, but as large as possible. If no such row is found, or a row with a "deleted" marker is found, it means that the entity didn't exist at that revision. The "revision type" field can currently have three values: 0, 1, 2, which means, respectively, ADD, MOD and DEL. A row with a revision of type DEL will only contain the id of the entity and no data (all fields NULL), as it only serves as a marker saying "this entity was deleted at that revision". Additionaly, there is a "REVINFO" table generated, which contains only two fields: the revision id and revision timestamp. A row is inserted into this table on each new revision, that is, on each commit of a transaction, which changes audited data. The name of this table can be configured, as well as additional content stored, using the @RevisionEntity annotation, see Chapter 4, Logging data for revisions. While global revisions are a good way to provide correct auditing of relations, some people have pointed out that this may be a bottleneck in systems, where data is very often modified. One viable solution is to introduce an option to have an entity "locally revisioned", that is revisions would be created for it independently. This wouldn't enable correct versioning of relations, but wouldn't also require the "REVINFO" table. Another possibility if to have "revisioning groups", that is groups of entities which share revision numbering. Each such group would have to consist of one or more strongly connected component of the graph induced by relations between entities. Your opinions on the subject are very welcome on the forum! :)

23

24

Chapter 8.

Audit table partitioning

8.1. Benefits of audit table partitioning
Because audit tables tend to grow indefinitely they can quickly become really large. When the audit tables have grown to a certain limit (varying per RDBMS and/or operating system) it makes sense to start using table partitioning. SQL table partitioning offers a lot of advantages including, but certainly not limited to: 1. Improved query performance by selectively moving rows to various partitions (or even purging old rows) 2. Faster data loads, index creation, etc.

8.2. Suitable columns for audit table partitioning

Generally SQL tables must be partitioned on a column that exists within the table. As a rule it makes sense to use either the end revision or the end revision timestamp column for partioning of audit tables.

Note
End revision information is not available for the default AuditStrategy. Therefore the following Envers configuration options are required:
org.hibernate.envers.audit_strategy org.hibernate.envers.strategy.ValidityAuditStrategy org.hibernate.envers.audit_strategy_validity_store_revend_timestamp

= true Optionally, you can also override the default values following properties:
org.hibernate.envers.audit_strategy_validity_end_rev_field_name org.hibernate.envers.audit_strategy_validity_revend_timestamp_field_name

For more information, see Chapter 3, Configuration.

The reason why the end revision information should be used for audit table partioning is based on the assumption that audit tables should be partionioned on an 'increasing level of interestingness', like so: 1. A couple of partitions with audit data that is not very (or no longer) interesting. This can be stored on slow media, and perhaps even be purged eventually.

25

Chapter 8. Audit table partit...

2. Some partitions for audit data that is potentially interesting. 3. One partition for audit data that is most likely to be interesting. This should be stored on the fastest media, both for reading and writing.

8.3. Audit table partitioning example

In order to determine a suitable column for the 'increasing level of interestingness', consider a simplified example of a salary registration for an unnamed agency. Currently, the salary table contains the following rows for a certain person X:

Table 8.1. Salaries table

Year 2006 2007 2008 2009 Salary (USD) 3300 3500 4000 4500

The salary for the current fiscal year (2010) is unknown. The agency requires that all changes in registered salaries for a fiscal year are recorded (i.e. an audit trail). The rationale behind this is that decisions made at a certain date are based on the registered salary at that time. And at any time it must be possible reproduce the reason why a certain decision was made at a certain date. The following audit information is available, sorted on in order of occurrence:

Table 8.2. Salaries - audit table

Year 2006 2007 2007 2008 2008 2008 2009 Revision type ADD ADD MOD ADD MOD MOD ADD Revision timestamp 2007-04-01 2008-04-01 2008-04-02 2009-04-01 2009-07-01 2010-02-01 2010-04-01 Salary (USD) 3300 35 3500 3700 4100 4000 4500 End revision timestamp null 2008-04-02 null 2009-07-01 2010-02-01 null null

8.3.1. Determining a suitable partitioning column

To partition this data, the 'level of interestingness' must be defined. Consider the following:

26

Determining a suitable partitioning scheme

1. For fiscal year 2006 there is only one revision. It has the oldest revision timestamp of all audit rows, but should still be regarded as interesting because it is the latest modification for this fiscal year in the salary table; its end revision timestamp is null. Also note that it would be very unfortunate if in 2011 there would be an update of the salary for fiscal year 2006 (which is possible in until at least 10 years after the fiscal year) and the audit information would have been moved to a slow disk (based on the age of the revision timestamp). Remember that in this case Envers will have to update the end revision timestamp of the most recent audit row. 2. There are two revisions in the salary of fiscal year 2007 which both have nearly the same revision timestamp and a different end revision timestamp. On first sight it is evident that the first revision was a mistake and probably uninteresting. The only interesting revision for 2007 is the one with end revision timestamp null. Based on the above, it is evident that only the end revision timestamp is suitable for audit table partitioning. The revision timestamp is not suitable.

8.3.2. Determining a suitable partitioning scheme

A possible partitioning scheme for the salary table would be as follows:

1. end revision timestamp year = 2008 This partition contains audit data that is not very (or no longer) interesting. 2. end revision timestamp year = 2009 This partition contains audit data that is potentially interesting. 3. end revision timestamp year >= 2010 or null This partition contains the most interesting audit data. This partitioning scheme also covers the potential problem of the update of the end revision timestamp, which occurs if a row in the audited table is modified. Even though Envers will update the end revision timestamp of the audit row to the system date at the instant of modification, the audit row will remain in the same partition (the 'extension bucket'). And sometime in 2011, the last partition (or 'extension bucket') is split into two new partitions:

1. end revision timestamp year = 2010 This partition contains audit data that is potentially interesting (in 2011). 2. end revision timestamp year >= 2011 or null This partition contains the most interesting audit data and is the new 'extension bucket'.

27

28

Chapter 9.

Building from source and testing

9.1. Building from source
Envers, as a module of Hibernate, uses the standard Hibernate build. So all the usual build targets (compile, test, install) will work. The public Hibernate Git repository is hosted at GitHub and can be browsed using GitHub [https:// github.com/hibernate/hibernate-core]. The source can be checked out using either

git clone https://github.com/hibernate/hibernate-core hibernate-core.git git clone git://github.com/hibernate/hibernate-core.git

9.2. Contributing
If you want to contribute a fix or new feature, either:

use the GitHub fork capability: clone, work on a branch, fork the repo on GitHub (fork button), push the work there and trigger a pull request (pull request button). use the pure Git approach: clone, work on a branch, push to a public fork repo hosted somewhere, trigger a pull request (git pull-request) provide a good old patch file: clone the repo, create a patch with git format-patch or diff and attach the patch file to JIRA

9.3. Envers integration tests

The tests use, by default, use a H2 in-memory database. The configuration file can be found in src/test/resources/hibernate.test.cfg.xml. The tests use TestNG, and can be found in the org.hibernate.envers.test.integration package (or rather, in subpackages of this package). The tests aren't unit tests, as they don't test individual classes, but the behaviour and interaction of many classes, hence the name of package. A test normally consists of an entity (or two entities) that will be audited and extends the AbstractEntityTest class, which has one abstract method: configure(Ejb3Configuration). The role of this method is to add the entities that will be used in the test to the configuration. The test data is in most cases created in the "initData" method (which is called once before the tests from this class are executed), which normally creates a couple of revisions, by persisting and updating entities. The tests first check if the revisions, in which entities where modified are

29

Chapter 9. Building from sour...

correct (the testRevisionCounts method), and if the historic data is correct (the testHistoryOfXxx methods).

30

Chapter 10.

Mapping exceptions
10.1. What isn't and will not be supported
Bags (the corresponding Java type is List), as they can contain non-unique elements. The reason is that persisting, for example a bag of String-s, violates a principle of relational databases: that each table is a set of tuples. In case of bags, however (which require a join table), if there is a duplicate element, the two tuples corresponding to the elements will be the same. Hibernate allows this, however Envers (or more precisely: the database connector) will throw an exception when trying to persist two identical elements, because of a unique constraint violation. There are at least two ways out if you need bag semantics:

1. use an indexed collection, with the @IndexColumn annotation, or 2. provide a unique id for your elements with the @CollectionId annotation.

10.2. What isn't and will be supported

1. collections of components

10.3. @OneToMany+@JoinColumn
When a collection is mapped using these two annotations, Hibernate doesn't generate a join table. Envers, however, has to do this, so that when you read the revisions in which the related entity has changed, you don't get false results. To be able to name the additional join table, there is a special annotation: @AuditJoinTable, which has similar semantics to JPA's @JoinTable. One special case are relations mapped with @OneToMany+@JoinColumn on the one side, and @ManyToOne+@JoinColumn(insertable=false, updatable=false) on the many side. Such relations are in fact bidirectional, but the owning side is the collection (see alse here [http://docs.jboss.org/hibernate/stable/annotations/reference/en/html_single/#entityhibspec-collection-extratype]). To properly audit such relations with Envers, you can use the @AuditMappedBy annotation. It enables you to specify the reverse property (using the mappedBy element). In case of indexed collections, the index column must also be mapped in the referenced entity (using @Column(insertable=false, updatable=false), and specified using positionMappedBy. This annotation will affect only the way Envers works. Please note that the annotation is experimental and may change in the future.

31

32

Chapter 11.

Migration from Envers standalone

With the inclusion of Envers as a Hibernate module, some of the public API and configuration defaults changed. In general, "versioning" is renamed to "auditing" (to avoid confusion with the annotation used for indicating an optimistic locking field - @Version). Because of changing some configuration defaults, there should be no more problems using Envers out-of-the-box with Oracle and other databases, which don't allow tables and field names to start with "_".

11.1. Changes to code

Public API changes involve changing "versioning" to "auditing". So, @Versioned became @Audited; @VersionsTable became @AuditTable and so on. Also, the query interface has changed slightly, mainly in the part for specifying restrictions, projections and order. Please refer to the Javadoc for further details.

11.2. Changes to configuration

First of all, is now named changed. It org.hibernate.envers.event.AuditEventListener, instead of org.jboss.envers.event.VersionsEventListener. So to make Envers work, you will have to change these settings in your persistence.xml or Hibernate configuration. Secondly, the names of the audit (versions) tables and additional auditing (versioning) fields changed. The default suffix added to the table name is now _AUD, instead of _versions. The name of the field that holds the revision number, and which is added to each audit (versions) table, is now REV, instead of _revision. Finally, the name of the field that holds the type of the revision, is now REVTYPE, instead of _rev_type. If you have a schema generated with the old version of Envers, you will have to set those properties, to use the new version of Envers without problems: the name of the event listener

<persistence-unit ...> <provider>org.hibernate.ejb.HibernatePersistence</provider> <class>...</class> <properties> <property name="hibernate.dialect" ... /> <!-- other hibernate properties --> <!-- Envers listeners --> <property name="org.hibernate.envers.auditTableSuffix" value="_versions" /> <property name="org.hibernate.envers.revisionFieldName" value="_revision" /> <property name="org.hibernate.envers.revisionTypeFieldName" value="_rev_type" /> <!-- other envers properties --> </properties>

33

Chapter 11. Migration from En...

</persistence-unit>

The org.hibernate.envers.doNotAuditOptimisticLockingField property is now by default true, instead of false. You probably never would want to audit the optimistic locking field. Also, the org.hibernate.envers.warnOnUnsupportedTypes configuraiton option was removed. In case you are using some unsupported types, use the @NotAudited annotation. See Chapter 3, Configuration for details on the configuration and a description of the configuration options.

11.3. Changes to the revision entity

This section applies only if you don't have a custom revision entity. The name of the revision entity generated by default changed, so if you used the default one, you'll have to add a custom revision entity, and map it to the old table. Here's the class that you have to create:

package org.hibernate.envers.example; import org.hibernate.envers.RevisionNumber; import org.hibernate.envers.RevisionTimestamp; import org.hibernate.envers.RevisionEntity; import javax.persistence.Id; import javax.persistence.GeneratedValue; import javax.persistence.Entity; import javax.persistence.Column; import javax.persistence.Table; @Entity @RevisionEntity @Table(name="_revisions_info") public class ExampleRevEntity { @Id @GeneratedValue @RevisionNumber @Column(name="revision_id") private int id; @RevisionTimestamp @Column(name="revision_timestamp") private long timestamp; // Getters, setters, equals, hashCode ... }

34

Chapter 12.

Links
Some useful links: 1. Hibernate [http://hibernate.org] 2. Forum [http://community.jboss.org/en/envers?view=discussions] 3. Anonymous SVN [http://anonsvn.jboss.org/repos/hibernate/core/trunk/envers/] 4. JIRA issue tracker [http://opensource.atlassian.com/projects/hibernate/browse/HHH] (when adding issues concerning Envers, be sure to select the "envers" component!) 5. IRC channel [irc://irc.freenode.net:6667/envers] 6. Blog [http://www.jboss.org/feeds/view/envers] 7. FAQ [https://community.jboss.org/wiki/EnversFAQ]

35

36